AuC to Fixed Asset Settlement... (through Investment Management)

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to that AuC?
Kindly assist....

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to the same?
The reason for this is my client made a down payment (with special GL indicator A) in December 2010 and he wants to settle the asset in December itself....
However, the down payment clearing is happening in this month.... But, he does not want to wait till the down payment clearing and wants to settle the same in December.
When he is trying to settle Without down payment clearing he is getting the following error...
Down payment to recipient 212000 0 area 01 amount 74,034.00 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 130434 0 in area 01. An amount of 74,034.00 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 130434 0.
Kindly assist on this issue.... whether it is possble or not?
Thanks in Advance

Similar Messages

How to budget the WBS through Investment management

Hi,
How to budget the WBS through Investment management. I tried IM52 but its not budgeting. Actually I have assigned the TOP WBS element to Appropriation request and assined the AR to Investment program, in that TOP WBS there are more than 20 low level WBS so I want to budget those WBS element which are under top WBS.
Regrads,
Ajay

Hi AjayKumar,
Assign IM Program type in your defaulted Budget profile and assign investment profile in project profile. make sure all settings are correct in Investment profile and budget profile. now assign budget to the IM Position ID to which Top level WBSE is assigned through AR. try to allocate budget from IM Position ID to Top Level WBSE. Once allocated check in CJ30 and you can further distribute the allocated budget from top level WBSE to lower level WBS Elements. You have to manually distribut budget from top level WBS Element to lower level wbs elements.
Hope this clears you !
Br
Hari

Assets (Investment profile): Transfer value from AuC to Fixed asset

Good afternoon all,
We have implemented Assets across investments profile. The settlement of investment is u201CSummary settlementu201D and we do not have u201CList of Originsu201D.
We have created a project and then a WBS that automatically creates the AuC (asset under construction). Transaction code CJ20N.
Then we have created the purchase order (ME21N) and afterwards we have carried out an entry sheet (ML81N) where we have informed the WBS previously created.
Through CJ88 we have done the settlement of the WBS and we have checked it.
Now we have created the fixed asset and we would like to transfer the value of the AuC to the fixed asset. I am not able and I am a bit lost. I do not how to perform it.
Any idea?
Many thanks and regards in advance. Daniel

Hi Renfe,
If the asset is an asset under construction belonging to an investment measure, then the transaction code KO88 needs to be used.
Warm regards,
Murukan Arunachalam

Mass transfer for AUC to Fixed assets

Hi,
I would like to do a mass transfer from AUC assets to fixed assets. 900 new fixed assets have been created. However, the AUC settlement to 900 assets are very tedious. Are there any batch processing available for this ?
Or can I use via LSMW ?
Thanks.
Angel.

Hi,
Prepare an excel sheet with columns as shown in the settlement rules screen and then paste it into settle rules screen.
I hope this can be done.
Thanks,
Srinu

Fixed Asset Sale through SD & AA Module

Dear All,
While selling the fixed asset, carried out the following procedure. Is it correct?
In India, we need to pay excise. Due to this, the asset which is required to be sold, needs to be created as a material.
Following steps are carried out -
a) Material code created under Material Type Finished Goods with Sales View. Value of the asset which is to be sold is put in as a Standard Price.
b) For sale, created inventory of the Finished Goods ( which is created for the asset) by way of Initial upload.
Accounting Entry - Finished Goods -
Dr 25000
                               To Initial Upload -
25000
c) Now, through SD , created PGI i.e.Post Goods Issue.
Accounting Entry -
FG COGoods Manufactured -
Dr 25000
(Exp Account)
      To Finished goods               25000
d) Billing Document Created
Accounting Entry -
Customer Account -
Dr   17996.16
    To Sales Offsetting A/c                  15000
    To Cenvat Suspense                        2400
    To Cenvat Suspense                           48
    To Cenvat Suspense                           24
    To CST Payable                               524
Excise Document Created
Cenvat Suspense A/c -
Dr   2472
           To BED Payable                      2400
           To E.Cess Payable                      48
           To Hr E.Cess payable                   24
e) Now carried out Asset Accounting Transaction
    ABAON - Asset Sale Without Customer
Accounting Document created
Sales Offsetting Account -
Dr 15000
Loss on Sale of Asset            Dr   9996
Accumulated Depre               Dr         4
     To Asset Account (sold asset)               25000
I m not sure on the initial upload & FG COGM effects. Whether I carried out correct process? Whether the accounting effects are correct?
Pl help. this is very urgent
Thanks in advance,
Gov.

Rakshith,
You are using Asset Sale Clearing Account for credit istead Non-valuated material. Your the Asset is your "stock material".
please also check:
Sale Of Fixed Assets from SD
Sales Order For Asset Sale
regards

AUC Settlement through Invest Order

Hi
Could please explain me how the Investment order works and the settlement of the Investment Order by step by step.
Please help me I am in need
Thanks & Regards
Ramki

Hi
1) Create Investment Order, with AUC master record (KO01).
2) Created budget for Investment Order (KO22).
3) Release the Investment Order in control data tab (KO02).
4) G/L Posting to Investment Order with amount 200$.(FB60)
5) AUC Settlement (KO88). (System created the settlement rule AUTO in KO02 here).
6) Created Final asset for settling from AUC (AS01).
7) Internal Order for AUC is "technically complete" so the system will perform 'full settlement' during next order settlement run.
Reg
Suresh

Asset purchasing through Material Management

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Do not post in multiple forums.>
Dear All,
While I am posting the MIGO for Asset , only material document is generated with out any accounting document .
The system message is: "Material document 5080000693 does not include an accounting document"
Can any one tell me, where I have to do customizing for this type of error.
thanks & regards,
RAmesh B

Hi,
If it is unvaluated material, the financial document will be created only on MIRO (invoice veification) stage.
Regards,
Eli

Fix Assets and EC-PCA ledger

Hello team,
I am aslo kind of new with Fix Assets. I was reconciling PCA ledger ( We just went Live) in trying to reconcile by using T-code 0KE1, I acciedntally deleted some documenst related to a fix asset settlement account in PCA ledger.
I tried reposting documents by executing 1KE8 and adding the FI docuemnts but nothign gets posted. Do I have to use a different transaction to re post fix assets documents, or do I have to re-settle even after the months have been closed? I just need to see the settlement documents in PCA ledger, FI is fine.
Thank You for yoru help,

You can use 9KE0 to post profit center documents.

How to Link equipments(PM) in a Settlement from AUC to Final Fixed Asset

Hi All,
I need your help with an integration problem between AA, CO and PM.
This is the scenario:
We are buying equipments that should not be capitaliazed until deliver them to the customer so to support this we do the following flow:
1. Create an sheduling agreement for the whole year with and AUC and a statistical Internal Order.
2. We create a 'Good receipt' for purchasing equipments(PM) againts the scheduking agreement. At this time we store the equipments in a specific storage location and those equipments are not capitalized. The equipments are create automatically.
3. We deliver the equipments to the customer, not necessarily all purchased equipments.
4. Monthly we have to capitalize the equipments that were delivered to the customer so we create a final fixed asset and execute the settlement of the AUC againts that final fixed.(First AIAB to create settlement rule and then AIBU to distribute)
Problem:
When we execute AIAB for the step 4 we can not link the equipments with the final fixed asset, in the settlement rule we have to calculate manually the percentage or the amount that shoul be settle according to the equipments that were deliver to the customer, but we would like to:
1. Link the equipments to the final fixed asset.
2. Update the material and quantity in the FI posting line item.
3. Update the quantity field in the final fixed asset master record automatically.
Do you have any idea?
Many thanks in advance.

Hi,
Please check in the screen layout for Asset Master. I think the equipment field is available.

AUC settlements to Fixed assets

hi
i can able to settle the wbs value to auc, then after this settlements rule tab for the wbs become gray i can't able to enter the asset number for the final settlements
please guide to solve this error
Regards
raj

hi
enter the Transaction CJ02
enter the proj.def. or wbs element
select the settlement rule button from the bottom of the screen
select the category as "FXA"
and save

Automatic settlement rule for receiver 'Fixed asset' (with out IM)

Hi Experts
I am working with project settlement to a fixed asset.
I have defined a selttlement profile in which, FXA is the only valid receiver.
Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
In this situation i am unable to generate settlement rule automatically as like the case with CTR.
The below message is experienced.
"Enter a distribution rule for Asset without a validity limit"
However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
warm regards
ramSiva

Hi,
Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
Regards,
Sreekanth

Unable to capitalize the AUC from project to Fixed Asset

Dear Experts,
I created AUC automatically from WBS and i have settled that WBS with CJ88. But when i try to capitalize it to Fixed asset via AIBU, i am unable to do it. The system throws the error message as
Line item settlement is not possible for asset MY02 36 0
Message no. AW050
Diagnosis
You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
However, line item settlement is not active in the asset class of asset 36 0 (company code MY02).
If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
Procedure
Check the setting for 'status of AuC' in the definition of the asset class.
Currently asset class settings was investment measure in "status of AUC". I choose this because i want to create a AUC automatically from WBS. If i choose line item settlement in asset class, then i can't assign that asset class to investment profile which inturn i am unable to create AUC automatically from WBS.
Please help me sort out this issue asap.
Regards
Vetri

Dear Vetri,
The reason for this error is most of the time that the field ANLA-XOPVW for this asset is not flagged. Please check this in table ANLA.
OR
In T.code OAOA check your AuC Asset Class whether your asset class is selected Line Item Settlement. If you have selected Line Item settlement after creating an asset and posting has been alsready done for the asset it won't help you.
The Line Item Settlement indicator should be active when the Asset Master is created and the postings are made to it. If this is the case, reverse the postings made to this asset - Create a New AUC - Make the postings Again - Then try AIAB.
I hope this will clear your conecpt and will help you to solve your issue.
If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Automatic Asset creation through Project settlement

Dear All,
We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
Can any body help me about the Process of Auto Asset creation through Project settlement.
I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
Thanks
Abhijeet
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PM
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PM

Hi,
There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
Regards
Sreekanth

Asset Under Construction(AUC),During month end settlement run(via KO8G)

Hi Guys ,
please hlep on this AUC :
During month end settlement run (via tcode KO8G), if there are -ve (credit) values to be settled to an Asset Under Construction (AUC) asset which does not have sufficient +ve value in the current FY, the settlement run will prompt an error message "Balance for transaction type group 10 negative for the area 01". The TT posted via the settlement run is TT115. To get around, user has to raise a manual journal (via doc type AT) to post the -ve value to the same AUC asset via TT101. TT 115 and 101 are configured differently (see attached).
Since the Fixed Assets system does accept credit posting to AUC via a journal, is there a solution to make posting go through via the settlement run?
Regards,
Narra

You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
Give the asset value date as 15.07.2007 in KO88
Hope this will work
Radha

AUC measure in investment management

Hi Experts,
i have the below requirement for AUC measure in investment management can any one please guid me how to configure for this.
u2022 Ability to create unique capital projects that could be made up of multiple fixed assets (New Store Opening, New DC, Office Remodel, Software Implementation)
u2022 Ability to forecast the time period / month the cash outlays will take place
u2022 Ability to report on Capital Project achievement in relation to planned time frame as well as in relation to Budget
u2022 Ability to assign capital projects to individual company codes and cost centers
Thanks in Advance.
RVI

Check here all nodes
SPRO-Financial Accounting (New)-Asset Accounting-Transactions-Capitalization of Assets under Construction..................
Srinivas

AuC to Fixed Asset Settlement... (through Investment Management)

Similar Messages

Maybe you are looking for