Reversing first two characters of a new line

Hello all
I have just been using Pages for the first time in a while and noticed a really odd behaviour. I thought I was making loads of typos but when observing closer, Pages was auto "correcting" for me.
When typing on a new line, I I failed to capitalize, It would capitalise the first letter and reverse the first 2 character.
So when trying to type "when", it became "hWen"
If I remember to capitalise the first letter, I leaves it alone. When it does its thing, the "edit' menubar flashes blue to show it has done something and it does that immediately after i have typed the second character (eg the h in the above example)
I thought it might be an autocorrection thing, but fix capitalisation and symbol and text substitution are both off.
Never done this before and never had problems
I was just about to write "Its confined to Pages (thought it might be a systemwide text expansion thing)" but now I note Keynote is doing it too!
Any help or suggestions gratefully received.
OS X 10.8.5, Pages 4.3, Keynote 5.3
Cheers
Rob

Since nobody else has any ideas, I thought I'd at least comment, so that you don't feel totally ignored.
I wouldn't be too quick to rule out "a systemwide text expansion thing" because I suspect that the iWork text handling is sufficiently different from other apps that it might react differently from other applications. Particularly if you have any third party "text expansion things."

Similar Messages

How can I pull info into a report using just the first two characters of that field?

I am trying to pull a total cost based upon locations in a particular area(s). Can I get the formula to just do this based on the first two characters of that field?
Here is what I have so far:
if {PACKED.LOCATIONS.NEXT OPERATION} = ["xx"] THEN {Job.Total_Price}
Packed locations is a table I'm pulling from and the column I want just the first two digits is the the Next operation. Once this meets the "xx" (whatever location) then give me the total price from the Job table.
This works for one or two orders, but then blows up when I do 10 or so.

Hi Steve, assuming that Next Operation is a string field...
Create a new formula and place it in the field where you see the {Job.Total_Price} field (Detail or Group depending on your report) with the formula:
whileprintingrecords;
global numbervar TotalValue;
if len({? Replace me}) <= len({PACKED.LOCATIONS.NEXT OPERATION}) then(
if left(ucase({PACKED.LOCATIONS.NEXT OPERATION}),len({? Replace me})) = ucase({? Replace me}) then
TotalValue := TotalValue + {Job.Total_Price}
TotalValue;
You can go ahead and suppress that field.
Create a new formula to place where you want to view the summary using the formula:
whileprintingrecords;
global numbervar TotalValue;
This method allows for a higher degree of flexibility and you can search for the first x characters of that field instead of only the first 2 characters

First two characters erversed! (see what I mean?...)

On my MacBook Pro listed below I get this funny behavior: I go into a text field, or type in TextEdit (it makes no difference what) and sometimes, the first two characters I type get inverted, i.e. I want to type the word 'word' and, sure enough, I hit the keys in the right order: w-o-r-d, but when I look at my screen, I've managed to type 'owrd'. 'w' and 'o' have been entered into the buffer in the opposite order to what I typed.
And yes, I've been observing this over a number of days prior to my posting. I touch type, and I'm very accurate. The problem doesn't manifest itself with other machines.
Anyone else has observed something like it?
Many thanks, as always.

Hi Carolyn, thanks for the reply.
I mustn't have put it clearly in the original post: it makes no difference if I'm editing text in TextEdit or another app. I've had the issue with pretty much every text-capable app in OS X.
Unless, of course, I'm losing it, and I'm actually entering the characters in the wrong order. But I don't think so.
Still, it's a peculiar issue to pin down, as it's definitely very hard to replicate. I mean, how do you 'replicate' potentially making a mistake?
Here's a funny instance of it, from just earlier tonight (it's nearly midnight here in Greece):
I was in Finder and wanted to quickly open a new Finder window to see how much free space I've got on the hard disk (at the bottom of the Finder window) and CMD-Tab to Safari and look at a page I had loaded. So the key sequence was: CMD-N, CMD-Tab. What I got was the opposite: OS X first switched over to Safari, and duly opened a new, blank Safari window instead.
I had definitely pressed CMD-N before pressing CMD-N.

Need to check whether first two characters of a string is Alphabets or not

Hi,
Need to check whether first two characters of a string is alphabet or not.
Lets say for Ex,
String as 'DE123456' i need to check whether first character is non-numeric and then second character as non numeric.
kindly help me on this.
 IF length(trim(p_parserec(31))) = 22 AND p_parserec(31) LIKE 'DE%' THEN
 AUFTRAGGEBERKONTONR := trim(p_parserec(31)) ;
 ELSIF (length(trim(p_parserec(31))) > 22 AND length(trim(p_parserec(31))) < 35) AND p_parserec(31) NOT LIKE 'DE%' THEN
 AUFTRAGGEBERKONTONR := lpad(trim(p_parserec(31)), 34, 0) ;
 ELSIF length(trim(p_parserec(31))) > 10 AND ascii(substr(p_parserec(31), 1, 2)) between 48 and 57 THEN
 AUFTRAGGEBERKONTONR := lpad(trim(p_parserec(31)), 10, 0) ;
 ELSE
 p_errorcd := sqlcode ;
 p_errordata := sqlerrm ;
 END IF ;
Note : In the third else if condition the character should be greater than 10 and first 2 characters should not be alphabets.

Siva.V wrote:
Need to check whether first two characters of a string is alphabet or not.
To this requirement only regexp_like will work too! No need of some other string function!
Like:-
 -- in regexp_like last parameter shows to ignore case (optional).
SQL> with t as
2 (select 'AB123456' as key from dual union all
3 select 'CD234567' from dual union all
4 select 'A1234567' from dual union all
5 select 'A52H4341' from dual union all
6 select 'Dk274341' from dual union all
7 select 'DE234556' from dual)
8 select key
9 from t
10 where regexp_like(key,'^[A-Z]{2}','i') -- even '^[[:alpha:]]{2}' or '^\D{2}' pattern can be replaced for same result..
11 /
KEY
AB123456
CD234567
Dk274341
DE234556
Thanks!

Getting text between two special characters as a new line

Hi all ,
I hope some one can point me in the right direction or tell me if its possible or if there is a function that can do this in tsql. I have table with two fields in a table ORDERNUM,NARRATIVE. The values in the NARRATIVE field are some what like this (they
come from a flat while and are delimited by a "^"). The examples are like :
OREDERNUM NARRATIVE
1234 ^Parcel shipped^picked^entry passed then returned back^white ford truck number 78455333^freight charges entered^parcel weight entered^parcel supervised^ticketsscannned^broken glass on
floor^
what i want to is seperate the text between the "^" as new line like
1234 parcel shipped
1234 picked
1234 entry passed then returned back
1234 white ford truck number 78455333
Can anyone please help me, is there a way or can any one show me what function does this? SUBSTRING for sure is not an answer as there is no fixed length for this.
Thanks
SV

CASE_NUMBER NARRATIVE
000000GA ^000000G-A CHIEF OF POLICE 02-02-95 PGE 1^***BATCH RUN COPY***^INCIDENT: MOLEST OTHER^LOCATION: 00416 N COLORADO AV OTHER:^EI20^ATTENTION:^ SEX OFFENSE^NOTIFIED: 02-01-95 2300 HRS BY: OTHER INVEST 02-01-95 2305 HRS^ARRESTS: 00 INJURED: 00 DEAD: 00 VEH TOWED: 00 BEAT: B51^^PERSON 01^VICTIM-PERSON^STEVE WOOLBRIGHT NH/W/M/14/08-31-80^SUBPEONA: N^ADDRESS: 00416 N COLORADO AV^HOME-PHONE: 322-9249^^^NARRATIVE:^REPORT MADE FROM STATE 310 REPORT STATING ABOVE-LISTED SUBJECT^HAS BEEN SEXUALLY MOLESTED. INVESTIGATION REQUESTED.^^4725 POPCHEFF A P4687^^02-01-95 2025 HRS - WILDER EULA W3163 TAPE:02^^ 95.033 00:23-END OF REPORT-95.033 00:26^^^
000718GB ^000718G-B ADDITION CHIEF OF POLICE 08-08-95 PGE 1^***BATCH RUN COPY***^INCIDENT: RECOVERED STOL. VEH PUBLIC STREET-ALLEY^LOCATION: PLAINFIELD,IN OTHER:^OCCURED: 04-01-93 TIME UNKNOWN EO11^ATTENTION:^ AUTO DESK AUTO THEFT WEST DISTRICT^NOTIFIED: 08-07-95 1600 HRS BY: OTHER INVEST 08-07-95 1600 HRS^ARRESTS: 00 INJURED: 00 DEAD: 00 VEH TOWED: 00 BEAT: OJ^^PERSON 01^OWNER/OPERATOR^DAVID FURMAN NH/W/M/ 08-20-57^DRIVERS LICENSE/SSN: 310702334^ADDRESS: 02495 AVON RD PLAINFIELD IN^HOME-PHONE: 838-0467^^^VEHICLE 01^PICKUP^BLACK 91 FORD F350 2DR^VIN: 2FTJW35G6MCA99397^DISPOSITION: RECOVERED^COMMENTS: OWNER RECOVERED VEHICLE IN 1993^^NARRATIVE:^ON 08/07/95, I RECEIVED A PHONE CALL FROM JAMES BEARD OF THE^^ -CONTINUED-^
000718GB ^000718G-B ADDITION CHIEF OF POLICE 08-08-95 PGE 2^^NATIONAL INSURANCE CRIME BUREAU WHO STATED HE WAS DOING A^CHECK OF HIS RECORDS AND CAME ACROSS A VEHICLE THAT WAS^STOLEN ON 04/24/92, UNDER IPD CASE #00718GA. HE STATED HE HAD^SPOKEN TO THE INSURANCE COMPANY ON THIS CASE AND THEY STATED^THEY HAD PAID OFF ON THE VEHICLE AND SOLD THE VEHICLE BACK TO^THE OWNER. APPARENTLY THE PERSON REPORTING THE EVENT, DAVID^FURMAN, REPORTED HIS VEHICLE STOLEN ON 04/24/92, APPROXIMATELY^1 YEAR LATER HE WAS CONTACTED BY AN UNIDENTIFIED PERSON AND^TOLD HIM TO MEET HIM ON A CORNER IN THE INDIANAPOLIS AREA AND TO^GIVE THE MAN $5,000.00 AND HE WOULD GIVE HIM HIS TRUCK BACK.^MR. FURMAN HAD ALREADY BEEN PAID BY THE INSURANCE COMPANY^APPROXIMATELY $31,000.00 IN RESTITUTION FOR HIS VEHICLE.^MR. FURMAN THEN WENT TO THIS CORNER LOT AND MET WITH THIS^UNIDENTIFIED W/M AND PAID HIM $5,000 CASH. THE MAN THEN TURNED^THE 1991 PICKUP TRUCK OVER TO MR. FURMAN. MR. FURMAN THEN^SETTLED WITH THE INSURANCE COMPANY AND PAID THEM $19,000.00 AND^BOUGHT THE VEHICLE BACK FROM THE INSURANCE COMPANY AND IT IS^NOW TITLED TO HIM AND REGISTERED TO HIM. HOWEVER, AT NO^POINT DID MR. FURMAN OR THE INSURANCE COMPANY CONTACT THE^POLICE DEPARTMENT TO TAKE THE VEHICLE OUT OF THE SYSTEM AS^BEING STOLEN. THAT IS THE REASON FOR THE REPORT. THE VEHICLE^SHOULD BE REPORTED AS A RECOVERED AND RELEASED TO OWNER. DAMAGE^UNKNOWN.^^^^ -CONTINUED-^
select TOP 214
CASE_NUMBER,
splitdata
from
SELECT F1.CASE_NUMBER,
O.splitdata
FROM
SELECT *,
cast('<X>'+replace(F.NARRATIVE,'^','</X><X>')+'</X>' as XML) as xmlfilter from [dbo].[CECASRPT] F
)F1
CROSS APPLY
SELECT fdata.D.value('.','varchar(5000)') as splitdata
FROM f1.xmlfilter.nodes('X') as fdata(D)) O
)t
where t.splitdata <> ''
SV

Is there a specific two characters at the beginning of all gift card codes?

I bought a $50 iTunes gift card today and when I scratched it, I accidentally removed the first two characters, I was just wondering, is there a way I can find out what they were? Thank you in advance!

See this -> iTunes Store: Invalid, inactive, or illegible codes

PHP MYSQL and DW Question: Invalid characters and new lines entry/viewing

Hello all,
I have followed David Powers' two php/dw/mysql books and I've
set up PHP
pages that insert, edit, delete, etc. listings. Everything
works fine
except for invalid characters being inserted into the
database, and then
displaying with a question mark in firefox.
Is there a trick to cleaning up the data that a user may
paste into a
textbox on a web page for insertion in the database before
the data is
inserted or as it is inserted? Em dashes, en dashes, 'curly
quotes' etc.
are giving me problems.
Also, when I enter new lines into the php page while I'm
typing out
information for a record, these new lines are not being
displayed either
in the database (using phpmyadmin to view) or on the
resulting details
pages, even though I'm using nl2br, etc. Is there a way to
make this
work reliably?
Thank you for any help you may give me!
-John

Hello all,
I have followed David Powers' two php/dw/mysql books and I've
set up PHP
pages that insert, edit, delete, etc. listings. Everything
works fine
except for invalid characters being inserted into the
database, and then
displaying with a question mark in firefox.
Is there a trick to cleaning up the data that a user may
paste into a
textbox on a web page for insertion in the database before
the data is
inserted or as it is inserted? Em dashes, en dashes, 'curly
quotes' etc.
are giving me problems.
Also, when I enter new lines into the php page while I'm
typing out
information for a record, these new lines are not being
displayed either
in the database (using phpmyadmin to view) or on the
resulting details
pages, even though I'm using nl2br, etc. Is there a way to
make this
work reliably?
Thank you for any help you may give me!
-John

Printing the First 14 Characters of Every Line in a Text File

My text file looks like the following:
1111097116274, H0101C58F8110C005, 1, 16:48:03
1111097116274, H0100058F8110C006, 2, 16:48:10
1111097116274, H00F0458F8110C006, 3, 16:48:12I want my java program to print the first 14 characters of every line. Here's what I have:
import java.awt.*;
import javax.swing.JOptionPane;
import java.io.*;
public class Read {
     public static void main( String args[] ) {
    try {
        BufferedReader in = new BufferedReader(new FileReader("aFile.txt"));
        String line;;
        /*String tagid;*/
        while ((line = in.readLine()) != null) {
             char[] tagid = line.toCharArray();
             line.getChars(0, 14, tagid, 0);
             System.out.println(tagid);
        in.close();
    } catch (IOException e) {
         JOptionPane.showMessageDialog( null, "Error" );
         System.exit(0);
     Instead of printing the first 14 characters of every line to output, it prints the whole text file.
Any ideas of what's wrong?
Thanks.

Well, that's the thing with a highly tuned, precision engine like your mind, JosAH. Adding a little alchohol to the fuel mix provides a performance boost, but as the alcohol/fuel ration increases, the performance improvement peaks and then degrades, until the performance is actually reduced. Now, I understand that in the case of the magic Grolsch, this performance curve is shifted farther to the right (graphed with Grolsch count as the independent variable, and performance improvement as the dependent variable), but it still occurs.
I recommend nitrous oxide. You may need to get your piston heads hardened, though.
� {�

Please Help!! (Stripping first 7 Characters of every line in a file???

Hey guys,
I need to read in a file but strip the first 7 characters from each line in the file???
How do i do it...
Any help will be appreciated...

Dear Friend,
Thankyou very much for your interest.
I am trying to strip the 1st 7 characters from the following file while reading....
1. <?xml version="1.0" encoding="UTF-8"?>
2.
3. <DOCUMENT>
4. <GREETING>
5. THE LIVE EXAMPLE...
6. <MESSAGE>
7. </GREETING
8. If this works then your project is over...;;;
9. </MESSAGE>
10. </DOCUMENT>
I meant, if my file contains line break (space of a line between two lines just like in Double Line spacing. Eg. between 1 and 3).... the program doesn't read after reading the first line. Your method does stip first seven characters of first line...
Your help is appreciated....

I have lost first two lines of tool bar, how do I retrieve?

I inadvertently deleted the first two lines of the tool bar. I have no file, edit, view, bookmarks, tools, etc. I have no way to go to the previous page or to the next page. I don't know how I deleted these important tools. Please help!

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazin'''e.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
'''Other issues that need your attention''''''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**'''''Security update version 11.5.9.620 released 2011-02-08'''''
*Adobe PDF Plug-In For Firefox and Netscape 10.0.0
**'''''Security update version 10.0.1 released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
**2 updates behind
**'''''Security update version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Finding New Line characters in string

Hello.
I have a textstring in which there are New Line characters. These cause problems when inserting the data.
An example is as follows (assume a table test exists with one column col1 VARCHAR2(2000):
CREATE TABLE test (col1 VARCHAR2(2000));
INSERT INTO test (col1) VALUES ('first line
second line');
INSERT INTO test (col1) VALUES ('first line' ||
chr(10) ||
'second line');
The first INSERT will fail but the second will succeed.
I want to find and replace these characters programatically in PL/SQL.
How can I edit a textstring in PL/SQL and replace the new line characters with ||
chr10) ||?
/Lars

How about this:
declare
v_oldstring VARCHAR2(50) := 'Line1'||chr(10)||'Line2'||chr(10)||'Line3';
v_tmpstring VARCHAR2(50);
v_newstring VARCHAR2(50);
begin
dbms_output.put_line(v_oldstring);
select replace(v_oldstring, chr(10), '''||chr(10)||''')
into v_tmpstring
from dual;
v_newstring := ''''|| v_tmpstring || '''';
dbms_output.put_line(v_newstring);
end;

When I create a new email and start typing, I get an error after two characters

This has been bothering me for months.
When I create a new email and start typing, I get an error after two characters (see below). I thought maybe it was a particular person's contact, or it was because I typed too fast, but it is not. Doesn't matter what email address I use, or how long I wait, the first address errors and I have to erase it and start over. Sometimes I have to try several times.
Very annoying. I am using the latest build of Safari on a Mac.
Any help would be greatly appreciated.
Bryan
<Image Edited for Personal Information>

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Copy the data from first line while dynamically adding a new line in table

Hi,
1. There is a table
2. An add button adds a new line to the table using 'AddInstance'
3. A record is entered in the first line
4. When the add button is clicked it adds a new line and along with it copies the data entered in the first line
My question is how to copy the data from the first line and show it in the new line added. This is required so that user can use most of the common values in the first line.
Thanks,
Nikhil

You can use the following Java Script in the Click event of the button.
// Get the number of rows in the table
var nrows = xfa.resolveNodes("page.table.DATA[*]").length;
// Add a new instance(row) to the table
page.table.addInstance.instanceManager(1);
xfa.form.recalculate(1);
// Copy the values from the first line to the newly created row
page.table.DATA\[ nrows \].field1.rawValue = page.table.DATA\[ 0 \].field1.rawValue;
..........field2
..........field3
Thanks,
Chandra Indukuri

How to skip first TWO Lines of .txt file using XSLT Mapping

Hi Friends ,
 I have an .txt file in has the format as
 <TEST>
 4564564545
 56456444566
 56465
 How can i skip the first two Lines when i am writing the XSLT Mapping ?
 That <TEST> and empty line shouldn't go the rfc .
 How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajan

you can avoid the empty lines in your File Content Conversion by defining offset.
Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines.

Reversing first two characters of a new line

Similar Messages

Maybe you are looking for