How to skip first TWO Lines of .txt file using XSLT Mapping

Hi Friends ,
 I have an .txt file in has the format as
 <TEST>
 4564564545
 56456444566
 56465
 How can i skip the first two Lines when i am writing the XSLT Mapping ?
 That <TEST> and empty line shouldn't go the rfc .
 How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajan

you can avoid the empty lines in your File Content Conversion by defining offset.
Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines.

Similar Messages

How to Count schedule lines in IDoc ORDERS05 using XSLT Mapping

Hi Experts,
In a Scenario where we are sending Purchase order (ORDERS05) to SAP SNC using XSLT Mapping,
where in we need to count the no. of schedule lines against the Purchase Order line.
As in Schedule line segment there is no such provision, so it needs to be handle in XSLT mapping to count the schedule lines.
Can you all please guide me how to go about the same.
Regards,
Nitin P

Hi Satish,
Thank you very much for the reply,
as there is only Quantity and other information is maintained against schedule lines how we can count the schedule line repeatation against PO line ? Is that very simple as you suggested or some other consideration also needs to be taken.
Please clarify the same and let me also know if there are some standard documents also for the same.
Regards,
Nitin P

How to skip first 5 lines from a txt file when using sql*loader

Hi,
I have a txt file that contains header info tat i dont need. how can i skip those line when importing the file to my database?
Cheers

Danny Fasen wrote:
I think most of us would process this report using pl/sql:
- read the file until you've read the column headers
- read the account info and insert the data in the table until you have read the last account info line
- read the file until you've read a new set of column headers (page 2)
- read the account info and insert the data in the table until you have read the last account info line (page 2)
- etc. until you reach the total block idenfitied by Count On-line ...
- read the totals and compare them with the data inserted in the tableOr maybe like this...
First create an external table to read the report as whole lines...
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE ext_report (
2    line VARCHAR2(200)
3          )
4 ORGANIZATION EXTERNAL (
5    TYPE oracle_loader
6    DEFAULT DIRECTORY TEST_DIR
7    ACCESS PARAMETERS (
8      RECORDS DELIMITED BY NEWLINE
9      BADFILE 'bad_report.bad'
10      DISCARDFILE 'dis_report.dis'
11      LOGFILE 'log_report.log'
12      FIELDS TERMINATED BY X'0D' RTRIM
13      MISSING FIELD VALUES ARE NULL
14      REJECT ROWS WITH ALL NULL FIELDS
15        (
16         line
17        )
18      )
19      LOCATION ('report.txt')
20    )
21 PARALLEL
22* REJECT LIMIT UNLIMITED
SQL> /
Table created.
SQL> select * from ext_report;
LINE
x report page1
CDC:00220 / Sat Aug-08-2009 xxxxp for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name                  Name on Bank Account           Bank ABA   Bank Acct            On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00
LARGE SPACE
weekly_eft_repo 1.0 Page: 2
CDC:00220 / Sat Aug-08-2009 Weekly EFT Sweep for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name Name on Bank Account Bank ABA Bank Acct On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
Count On-line Amount Instant Amount Total Amount
============== ====================== ====================== ======================
Debits 0 0.00 0.00 0.00
Credits 3 -32,704.98 -15.00 -32,719.98
Totals 3 -32,704.98 -15.00 -32,719.98
Total Tape Records / Blocks / Hash : 3 1 37037034
End of Report
23 rows selected.Then we can check we can just pull out the lines of data we're interested in from that...
SQL> ed
Wrote file afiedt.buf
1 create view vw_report as
2* select line from ext_report where regexp_like(line, '^[0-9]')
SQL> /
View created.
SQL> select * from vw_report;
LINE
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00And then we adapt that view to extract the data from those lines as actual columns...
SQL> col retailer format a10
SQL> col retailer_name format a20
SQL> col name_on_bank_account format a20
SQL> col online_amount format 999,990.00
SQL> col instant_amount format 999,990.00
SQL> col total_amount format 999,990.00
SQL> ed
Wrote file afiedt.buf
1 create or replace view vw_report as
2 select regexp_substr(line, '[^ ]+', 1, 1) as retailer
3        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '(.*) +[^ ]+$', '\1')) as retailer_name
4        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '.* ([^ ]+)$', '\1')) as name_on_bank_account
5        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 1)) as bank_aba
6        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 2)) as bank_account
7        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 3),'999,999.00') as online_amount
8        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 5),'999,999.00') as instant_amount
9        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 7),'999,999.00') as total_amount
10* from (select line from ext_report where regexp_like(line, '^[0-9]'))
SQL> /
View created.
SQL> select * from vw_report;
RETAILER   RETAILER_NAME        NAME_ON_BANK_ACCOUNT   BANK_ABA BANK_ACCOUNT ONLINE_AMOUNT INSTANT_AMOUNT TOTAL_AMOUNT
0100103    BANK Terminal        raji                  123456789    123456789    -29,999.98           0.00   -29,999.98
0100105    Independent 1        Savings               123456789    100000002     -1,905.00           0.00    -1,905.00
0100106    Independent 2        system                123456789    100000003       -800.00         -15.00      -815.00
SQL>I couldn't quite figure out the "9" and the "99" data that was on those lines so I assume it should just be ignored. I also formatted the report data to fixed columns width in my external text file as I'd assume that's how the data would be generated, not that that would make much difference when extracting the values with regular expressions as I've done.
So... something like that anyway. ;)

How to remove first two headerlines while appending files

Hi,
Currently the requirement is client only needs the file name without any time stamp or counter. They do not want to overwrite the records.
They need the csv file structure as:
Customer
Custnum,Custname
123,ABC
While I am using append, it is also appending the first two header lines.
Can you please suggest how to append without headers.

Hi Swapna
One option is of course to have the flag in the source structure so that you can identify whether it is first run or not. But if there is no such flag in source structure then the only possible solution will be done
based on a look up.
You can perform the same in java mapping using a hash table which will be updated with the file name in its first run and in the next run you will check whether the file name exists in the has table or not.Depending on that you have to pass the header value.
Next solution can be maintaining a table in ABAP and perform a RFC look up in message mapping.
When the file arrives, its will check whether the name is already there in the table or not. If the file not exists, then it will insert the file name in the table and return true. Based on this you will pass the header names.
When the next file will arrive with the same name , The look up will find that file has already present in the table so it will return false and no header information will be sent. Only data will be sent.

How to skip the header rows of the file using UTL_FILE?

Hi,
I created a procedure to read the file from shared location using UTl_FILE package. But, I stucked why because I don't know how to skip the header rows as those rows are headings for one of the report.Since, please help me.
Regards,
Vissu.....

vissu wrote:
Hi,
I created a procedure to read the file from shared location using UTl_FILE package. But, I stucked why because I don't know how to skip the header rows as those rows are headings for one of the report.Since, please help me.
Regards,
Vissu.....UTL_FILE just reads data from the file. It has no concept of what could be a "header" or "body" or "records" or "footer" or any other data based concept. If you want to skip lines of a file, you will just need to read them using UTL_FILE and ignore them.

How to feed data to generate a html file using XSLT?

I need to implement email content generation in the hmtl format using XSLT. The document information is stored in a xsl file and the data is generated dynmically in the application. How to feed the data to have the file?
Thanks,
v.

Thanks for your information. I, however, already thought about using string stream instand of a XML file to pass in data. I am looking for a more intelligent method. It doesn't seem to have one so far.

How to write XSLT codeing in file to file using XSLT mapping?

Hi ,
Experts,
I am new to XSLT coding as iam doing File to File XSLT Mapping for i have created IR and ID part and i have wriiten XSLT codeing which is not working.
source structure: Target structure
Fname Name = (Fname+Lname)
Lname
maths
science Total_marks = (mathssciencesocial)
social
<?xml version='1.0' ?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:aash="http://xlst.file2file" xmlns:ns0="http://xlst.file2file">
<xsl:template match="/"> |
<aash:mt_student_result> this is my Naming Space
<Data>
<Name>
<xsl:value-of select="concat(ns0:mt_student/data/FName,ns0:mt_student/data/LName)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:value-of select="(ns0:mt_student/data/Marks/Maths)(ns0:MT_Student/Data/Marks/Science)(ns0:mt_student/data/Marks/Social)"/>
</Total_Marks>
</Marks>
</Data>
</aash:mt_student_result>
</xsl:template>
</xsl:transform>
while testing in Interface mapping the values are not comming into result side please verify the code and suggest me the correct one.
Thanks in advance
shabeer ahmed.

Hi Shabeer,
PFB, the corrected XSL.
try using it, it would work.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:aash="http://xlst.file2file" xmlns:ns0="http://xlst.file2file">
<xsl:template match="/"> |
<aash:mt_student_result> this is my Naming Space
<Data>
<Name>
<xsl:variable name="vFName" select="ns0:mt_student_result/Data/FName"/>
<xsl:variable name="vLName" select="ns0:mt_student_result/Data/LName"/>
<xsl:value-of select="concat($vFName,$vLName)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:variable name="vMaths" select="ns0:mt_student_result/Data/Marks/Maths"/>
<xsl:variable name="vScience" select="ns0:mt_student_result/Data/Marks/Science"/>
<xsl:value-of select="concat($vMaths,$vScience)"/>
</Total_Marks>
</Marks>
</Data>
</aash:mt_student_result>
</xsl:template>
</xsl:transform>
I have given input as,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_student_result xmlns:ns0="http://xlst.file2file">
 <Data>
 <FName>FName</FName>
 <LName>LName</LName>
 <Marks>
 <Maths>M</Maths>
 <Science>S</Science>
 </Marks>
 </Data>
</ns0:mt_student_result>
Output was,
<?xml version='1.0' ?>
|
<aash:mt_student_result xmlns:sap="http://www.sap.com/sapxsl" xmlns:ns0="http://xlst.file2file" xmlns:aash="http://xlst.file2file"> this is my Naming Space
<Data><Name>FNameLName</Name><Marks><Total_Marks>MS</Total_Marks></Marks></Data></aash:mt_student_result>
It worked.Try it out.
Regards,
Swetha.

How to merge two columns in csv file using vbscript?

How i can merge two column in csv file using vbscript or powershell?
1 , 2 , 3 , 4 , 5
1 , 23 , 4 , 5
thanks

Here are two examples
http://msdn.microsoft.com/en-us/library/ms191250.aspx
calulated
http://msdn.microsoft.com/en-us/library/ms191250.aspx
Gary Newman MCSE, MCT, CCNA, MCSD, MCPD, MCDBA, MCAD, MCSA, MCTS Developer and Administrator On SharePoint 2013 SharePoint Practice Manager for AmeriTeach Denver, CO.

I have lost first two lines of tool bar, how do I retrieve?

I inadvertently deleted the first two lines of the tool bar. I have no file, edit, view, bookmarks, tools, etc. I have no way to go to the previous page or to the next page. I don't know how I deleted these important tools. Please help!

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazin'''e.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
'''Other issues that need your attention''''''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**'''''Security update version 11.5.9.620 released 2011-02-08'''''
*Adobe PDF Plug-In For Firefox and Netscape 10.0.0
**'''''Security update version 10.0.1 released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
**2 updates behind
**'''''Security update version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How to skip first record while inserting data from a flat file to BW system

Hi Experts,
In my project we have to upload flat file into a BW system. I have written a program and it is working fine.
Now we have got another requirement. The flat file will have a header record (first row). While uploading the flat file we have to skip this record. How I can do so?
The code is as below:
FORM upload1.
DATA : wf_title TYPE string,
 lt_filetab TYPE filetable,
 l_separator TYPE char01,
 l_action TYPE i,
 l_count TYPE i,
 ls_filetab TYPE file_table,
 wf_delemt TYPE rollname,
 wa_fieldcat TYPE lvc_s_fcat,
 tb_fieldcat TYPE lvc_t_fcat,
 rows_read TYPE i,
 p_error TYPE char01,
 l_file TYPE string.
DATA: wf_object(30) TYPE c,
 wf_tablnm TYPE rsdchkview.
wf_object = 'myprogram'.
DATA i TYPE i.
DATA:
 lr_mdmt TYPE REF TO cl_rsdmd_mdmt,
 lr_mdmtr TYPE REF TO cl_rsdmd_mdmtr,
 lt_idocstate TYPE rsarr_t_idocstate,
 lv_subrc TYPE sysubrc.
TYPES : BEGIN OF test_struc,
 /bic/myprogram TYPE /bic/oimyprogram,
 txtmd TYPE rstxtmd,
 END OF test_struc.
DATA : tb_assum TYPE TABLE OF /bic/pmyprogram.
DATA: wa_ztext TYPE /bic/tmyprogram,
 myprogram_temp TYPE ziott_assum,
 wa_myprogram TYPE /bic/pmyprogram.
DATA : test_upload TYPE STANDARD TABLE OF test_struc,
 wa2 TYPE test_struc.
DATA : wa_test_upload TYPE test_struc,
 ztable_data TYPE TABLE OF /bic/pmyprogram,
 ztable_text TYPE TABLE OF /bic/tmyprogram,
 wa_upld_text TYPE /bic/tmyprogram,
 wa_upld_data TYPE /bic/pmyprogram,
 t_assum TYPE ziott_assum.
DATA : wa1 LIKE test_upload.
wf_title = text-026.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
 EXPORTING
 window_title = wf_title
 default_extension = 'txt'
 file_filter = 'Tab delimited Text Files (*.txt)'
 CHANGING
 file_table = lt_filetab
 rc = l_count
 user_action = l_action
 EXCEPTIONS
 file_open_dialog_failed = 1
 cntl_error = 2
 OTHERS = 3. "#EC NOTEXT
IF sy-subrc <> 0.
 EXIT.
ENDIF.
LOOP AT lt_filetab INTO ls_filetab.
 l_file = ls_filetab.
ENDLOOP.
CHECK l_action = 0.
IF l_file IS INITIAL.
 EXIT.
ENDIF.
l_separator = 'X'.
wa_fieldcat-fieldname = 'test'.
wa_fieldcat-dd_roll = wf_delemt.
APPEND wa_fieldcat TO tb_fieldcat.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
CLEAR wa_test_upload.
Upload file from front-end (PC)
File format is tab-delimited ASCII
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = l_file
 has_field_separator = l_separator
 TABLES
 data_tab = i_mara
 data_tab = test_upload
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
 EXIT.
ELSE.
 CALL FUNCTION 'MESSAGES_INITIALIZE'.
 IF test_upload IS NOT INITIAL.
 DESCRIBE TABLE test_upload LINES rows_read.
 CLEAR : wa_test_upload,wa_upld_data.
 LOOP AT test_upload INTO wa_test_upload.
 CLEAR : p_error.
 rows_read = sy-tabix.
 IF wa_test_upload-/bic/myprogram IS INITIAL.
 p_error = 'X'.
 MESSAGE s153 WITH wa_test_upload-/bic/myprogram sy-tabix.
 CONTINUE.
 ELSE.
 TRANSLATE wa_test_upload-/bic/myprogram TO UPPER CASE.
 wa_upld_text-txtmd = wa_test_upload-txtmd.
 wa_upld_text-txtsh = wa_test_upload-txtmd.
 wa_upld_text-langu = sy-langu.
 wa_upld_data-chrt_accts = 'xyz1'.
 wa_upld_data-co_area = '12'.
 wa_upld_data-/bic/zxyzbcsg = 'Iy'.
 wa_upld_data-objvers = 'A'.
 wa_upld_data-changed = 'I'.
 wa_upld_data-/bic/zass_mdl = 'rrr'.
 wa_upld_data-/bic/zass_typ = 'I'.
 wa_upld_data-/bic/zdriver = 'yyy'.
 wa_upld_text-langu = sy-langu.
 MOVE-CORRESPONDING wa_test_upload TO wa_upld_data.
 MOVE-CORRESPONDING wa_test_upload TO wa_upld_text.
 APPEND wa_upld_data TO ztable_data.
 APPEND wa_upld_text TO ztable_text.
 ENDIF.
 ENDLOOP.
 DELETE ADJACENT DUPLICATES FROM ztable_data.
 DELETE ADJACENT DUPLICATES FROM ztable_text.
 IF ztable_data IS NOT INITIAL.
 CALL METHOD cl_rsdmd_mdmt=>factory
 EXPORTING
 i_chabasnm = 'myprogram'
 IMPORTING
 e_r_mdmt = lr_mdmt
 EXCEPTIONS
 invalid_iobjnm = 1
 OTHERS = 2.
 CALL FUNCTION 'MESSAGES_INITIALIZE'.
 **Lock the Infoobject to update
 CALL FUNCTION 'RSDG_IOBJ_ENQUEUE'
 EXPORTING
 i_objnm = wf_object
 i_scope = '1'
 i_msgty = rs_c_error
 EXCEPTIONS
 foreign_lock = 1
 sys_failure = 2.
 IF sy-subrc = 1.
 MESSAGE i107(zddd_rr) WITH wf_object sy-msgv2.
 EXIT.
 ELSEIF sy-subrc = 2.
 MESSAGE i108(zddd_rr) WITH wf_object.
 EXIT.
 ENDIF.
*****Update Master Table
 IF ztable_data IS NOT INITIAL.
 CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
 EXPORTING
 i_iobjnm = 'myprogram'
 i_tabclass = 'M'
 I_T_ATTR = lt_attr
 TABLES
 i_t_table = ztable_data
 EXCEPTIONS
 attribute_name_error = 1
 iobj_not_found = 2
 generate_program_error = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 CALL FUNCTION 'MESSAGE_STORE'
 EXPORTING
 arbgb = 'zddd_rr'
 msgty = 'E'
 txtnr = '054'
 msgv1 = text-033
 EXCEPTIONS
 OTHERS = 3.
 MESSAGE e054(zddd_rr) WITH 'myprogram'.
 ELSE.
 CALL FUNCTION 'MESSAGE_STORE'
 EXPORTING
 arbgb = 'zddd_rr'
 msgty = 'S'
 txtnr = '053'
 msgv1 = text-033
 EXCEPTIONS
 OTHERS = 3.
 ENDIF.
*endif.
*****update Text Table
 IF ztable_text IS NOT INITIAL.
 CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
 EXPORTING
 i_iobjnm = 'myprogram'
 i_tabclass = 'T'
 TABLES
 i_t_table = ztable_text
 EXCEPTIONS
 attribute_name_error = 1
 iobj_not_found = 2
 generate_program_error = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 CALL FUNCTION 'MESSAGE_STORE'
 EXPORTING
 arbgb = 'zddd_rr'
 msgty = 'E'
 txtnr = '055'
 msgv1 = text-033
 EXCEPTIONS
 OTHERS = 3.
 ENDIF.
 ENDIF.
 ELSE.
 MESSAGE s178(zddd_rr).
 ENDIF.
 ENDIF.
 COMMIT WORK.
 CALL FUNCTION 'RSD_CHKTAB_GET_FOR_CHA_BAS'
 EXPORTING
 i_chabasnm = 'myprogram'
 IMPORTING
 e_chktab = wf_tablnm
 EXCEPTIONS
 name_error = 1.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
****Release locks on Infoobject
 CALL FUNCTION 'RSDG_IOBJ_DEQUEUE'
 EXPORTING
 i_objnm = 'myprogram'
 i_scope = '1'.
 ENDIF.
ENDIF.
PERFORM data_selection .
PERFORM update_alv_grid_display.
CALL FUNCTION 'MESSAGES_SHOW'.
ENDFORM.
Please let me know how I can skip first record of the flat file?
Regards,
S

go through this hope u can get some idea
REPORT ztest no standard page heading line-size 255.
 Declaration *
TYPES t_itab1 TYPE alsmex_tabline.
types: begin of t_csks,
 kostl like csks-kostl,
 end of t_csks.
types: begin of t_cska,
 kstar like cska-kstar,
 end of t_cska.
data: begin of t_flatfile,
 docdate like COHEADER-BLDAT,
 postdate like COHEADER-BUDAT,
 doctext like COHEADER-BLTXT,
 costele like RK23F-KSTAR,
 amount like RK23F-WTGBTR,
 scostctr like RK23F-SKOSTL,
 rcostctr like RK23F-EKOSTL,
 rintorder like RK23F-EAUFNR,
 end of t_flatfile.
data: begin of t_flatfile1,
 docdate like COHEADER-BLDAT,
 postdate like COHEADER-BUDAT,
 doctext like COHEADER-BLTXT,
 costele like RK23F-KSTAR,
 amount like RK23F-WTGBTR,
 scostctr like RK23F-SKOSTL,
 rcostctr like RK23F-EKOSTL,
 rintorder like RK23F-EAUFNR,
 NUM LIKE SY-INDEX,
 end of t_flatfile1.
data: itab like table of t_flatfile with header line.
data: itab2 like table of t_flatfile1 with header line.
DATA: it_itab1 TYPE STANDARD TABLE OF t_itab1 WITH HEADER LINE,
 MESSTAB1 LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE,
 MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of bdcdata occurs 0.
 include structure bdcdata.
data: end of bdcdata.
data:t_lin type i VALUE '0',
 u_rec type i VALUE '0',
 s_rec type i VALUE '0'.
data: it_csks type standard table of t_csks,
 wa_csks type t_csks.
data: it_cska type standard table of t_cska,
 wa_cska type t_cska.
*Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
parameters: p_docdat LIKE COHEADER-BLDAT obligatory,
 p_postda LIKE COHEADER-BUDAT obligatory,
 p_doctxt LIKE COHEADER-BLTXT.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-011.
parameters: p_file LIKE RLGRAP-FILENAME obligatory,
 DIS_MODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b2.
 A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_local_file_name USING p_file.
*Start of Selection
START-OF-SELECTION.
Perform get_Excel_data.
perform validate_data.
Perform Process_Data.
 end-of-selection
end-of-selection.
perform display_data.
*& Form get_local_file_name
 text
 -->P_P_FILE text
FORM get_local_file_name USING P_P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 CHANGING
 file_name = p_file.
ENDFORM. " get_local_file_name
*& Form get_Excel_data
 text
--> p1 text
<-- p2 text
FORM get_Excel_data .
FIELD-SYMBOLS : <FS>.
DATA : V_INDEX TYPE I.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = p_file
 i_begin_col = 1
 i_begin_row = 2
 i_begin_row = 1
 i_end_col = 256
 i_end_row = 9999 "65536
 TABLES
 intern = it_itab1
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 Message text-013 type 'E'.
ENDIF.
IF IT_ITAB1[] IS INITIAL.
 Message text-001 type 'E'.
else. "IF IT_ITAB1[] IS INITIAL.
 data: itab2 like itab occurs 0 with header line.
 SORT IT_ITAB1 BY ROW COL.
 LOOP AT IT_ITAB1.
 MOVE :IT_ITAB1-COL TO V_INDEX.
 ASSIGN COMPONENT V_INDEX OF STRUCTURE itab2 TO <FS>.
 MOVE : IT_ITAB1-VALUE TO <FS>.
 AT END OF ROW.
 MOVE-CORRESPONDING itab2 TO itab.
 APPEND itab.
 CLEAR:itab,itab2.
 ENDAT.
 endloop.
 describe table itab lines t_lin.
endif. "IF IT_ITAB1[] IS INITIAL.
ENDFORM. " get_Excel_data
*& Form Process_Data
 text
--> p1 text
<-- p2 text
FORM Process_Data .
data:l_tabix type sy-tabix.
data:l_periv like t001-periv,
 l_monat like bkpf-monat,
 l_gjahr like bkpf-gjahr,
 l_amt(21) type c.
data: l_ddate(10),
 l_pdate(10).
WRITE p_docdat TO l_ddate.
WRITE p_postda TO l_pdate.
clear: l_periv,l_monat,l_gjahr.
select single periv from t001 into l_periv where bukrs = '5000'. "P_bukrs
if sy-subrc eq 0.
 l_gjahr = p_postda+0(4).
 call function 'FI_PERIOD_DETERMINE'
 EXPORTING
 i_budat = p_postda
 i_bukrs = '5000' "p_bukrs
 i_periv = l_periv
 i_gjahr = l_gjahr
 IMPORTING
 e_monat = l_monat.
 clear:l_periv.
endif.
loop at itab2.
 refresh:bdcdata.
 clear:bdcdata.
 l_tabix = sy-tabix.
 perform bdc_dynpro using 'SAPLK23F1' '1200'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'COHEADER-SEND_REC_REL'
 '10SAP'.
 perform bdc_field using 'RK23F-STATUS'
 'S'.
 perform bdc_field using 'COHEADER-BLDAT'
 itab-docdate.
 l_ddate.
 perform bdc_field using 'COHEADER-BUDAT'
 itab-postdate.
 l_pdate.
 perform bdc_field using 'COHEADER-PERIO'
 l_monat. "'9'.
 perform bdc_field using 'COHEADER-BLTXT'
 itab-doctext.
 p_doctxt.
 perform bdc_field using 'RK23F-KSTAR'
 itab2-costele.
 WRITE itab2-amount TO l_amt.
l_amt = itab-amount.
 condense l_amt no-gaps.
 perform bdc_field using 'RK23F-WTGBTR'
 l_amt.
 itab-amount.
 perform bdc_field using 'RK23F-WAERS'
 'USD'.
*perform bdc_field using 'RK23F-SGTXT'
 itab-doctext.
 perform bdc_field using 'RK23F-SKOSTL'
 itab2-scostctr.
 perform bdc_field using 'BDC_CURSOR'
 'RK23F-EAUFNR'.
 perform bdc_field using 'RK23F-EKOSTL'
 itab2-rcostctr.
 perform bdc_field using 'RK23F-EAUFNR'
 itab2-rintorder.
 perform bdc_dynpro using 'SAPLK23F1' '1200'.
 perform bdc_field using 'BDC_OKCODE'
 '=POST'.
 perform bdc_field using 'COHEADER-SEND_REC_REL'
 '10SAP'.
 perform bdc_field using 'RK23F-STATUS'
 'S'.
 perform bdc_field using 'COHEADER-BLDAT'
 itab-docdate.
 l_ddate.
 perform bdc_field using 'COHEADER-BUDAT'
 itab-postdate.
 l_pdate.
 perform bdc_field using 'COHEADER-PERIO'
 '9'.
 l_monat.
 perform bdc_field using 'COHEADER-BLTXT'
 itab-doctext.
 p_doctxt.
 perform bdc_field using 'BDC_CURSOR'
 'RK23F-KSTAR'.
 perform bdc_field using 'RK23F-WAERS'
 'USD'.
 CALL TRANSACTION 'KB15N' USING BDCDATA MODE DIS_MODE MESSAGES INTO MESSTAB.
 If sy-subrc = 0.
 s_rec = s_rec + 1.
 ELSE.
 u_rec = u_rec + 1.
 move ITAB2-NUM to messtab1-msgv1.
 concatenate itab2-costele ' | ' itab2-scostctr ' | ' itab2-rcostctr ' | ' itab2-rintorder into messtab1-msgv2.
 condense messtab1-msgv2.
 condense messtab1-msgv1.
 append messtab1.
 endif.
 clear:itab2.
endloop.
ENDFORM. " Process_Data
 BDC_DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
 BDC_FIELD *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> ''. "NODATA.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form display_data
 text
--> p1 text
<-- p2 text
FORM display_data .
skip 2.
write:/15 text-002.
skip 2.
write:/8 text-003.
SKIP.
write:/12 text-008,
 25 P_DOCDAT.
SKIP.
write:/12 text-009,
 25 P_POSTDA.
SKIP.
write:/12 text-012,
 25 P_DOCTXT.
SKIP.
write:/12 text-004,
 25 p_file.
skip 2.
write:/8 text-005,
 60 t_lin.
skip.
write:/8 text-006,
 60 s_rec.
skip.
write:/8 text-007,
 60 u_rec.
skip.
write:/10 'row no',
 20 'Information'.
skip.
loop at messtab1.
 write:/10 messtab1-msgv1,
 20 messtab1-msgv2.
 clear:messtab1.
endloop.
ENDFORM. " display_data
*& Form validate_data
 text
--> p1 text
<-- p2 text
FORM validate_data .
data: l_tabix1 type sy-tabix.
data: l_tabix2 type sy-tabix.
if not itab[] is initial.
 select kostl from CSKS into table it_csks.
 if sy-subrc eq 0.
 sort it_csks by kostl.
 endif.
 select kstar from CSKA into table it_cska.
 if sy-subrc eq 0.
 sort it_cska by kstar.
 endif.
 loop at itab.
 l_tabix1 = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = itab-scostctr
IMPORTING
 OUTPUT = itab-scostctr .
 read table it_csks into wa_csks with key kostl = itab-scostctr.
 if sy-subrc ne 0.
 u_rec = u_rec + 1.
 L_TABIX2 = l_tabix1 + 1.
 move l_tabix2 to messtab1-msgv1.
 move l_tabix1 to messtab1-msgv1.
 move itab-rintorder to messtab1-msgv2.
 concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
 condense messtab1-msgv2.
 condense messtab1-msgv1.
 append messtab1.
 clear:wa_csks.
 CLEAR:L_TABIX2.
 continue.
 endif.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = itab-rcostctr
IMPORTING
 OUTPUT = itab-rcostctr .
 read table it_csks into wa_csks with key kostl = itab-rcostctr.
 if sy-subrc ne 0.
 u_rec = u_rec + 1.
 L_TABIX2 = l_tabix1 + 1.
 move l_tabix2 to messtab1-msgv1.
 move l_tabix1 to messtab1-msgv1.
 concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
 condense messtab1-msgv2.
 condense messtab1-msgv1.
 append messtab1.
 clear:wa_csks.
 CLEAR:L_TABIX2.
 continue.
 endif.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = itab-costele
IMPORTING
 OUTPUT = itab-costele .
 read table it_cska into wa_cska with key kstar = itab-costele.
 if sy-subrc ne 0.
 u_rec = u_rec + 1.
 L_TABIX2 = l_tabix1 + 1.
 move l_tabix2 to messtab1-msgv1.
 move l_tabix1 to messtab1-msgv1.
 concatenate itab-costele ' | ' itab-scostctr ' | ' itab-rcostctr ' | ' itab-rintorder into messtab1-msgv2.
 condense messtab1-msgv2.
 condense messtab1-msgv1.
 append messtab1.
 clear:wa_csks.
 CLEAR:L_TABIX2.
 continue.
 endif.
move-corresponding itab to itab2.
MOVE l_tabix1 TO ITAB2-NUM.
append itab2.
clear: itab2.
 clear:itab.
 endloop.
else.
 message 'No records in File' type 'S'.
endif.
ENDFORM. " validate_data

First two lines of each page... - Format Issue

I have a manual I am currently updating. I am unaware of how it was formatted initially but it is currently pushing the first two lines of each page all the way to the left margin. I have checked everything I know to check for the format setting
and have been unable to find anything out of the ordinary. Anyone have any idea what causes this?
I am using Word 2010

It may be possibly due to the indentation setting of your document.
To change it, choose the below option in your word file
Home => Paragraph => Indents and Spacing => Indentation => Left (0 pi)
Try if this work outs.

TS3274 Email display problem: My email only display the list of emails and a preview (first two lines of the body of the mail). If one click on the message it only shows the heading on the right hand side of the screen, but not the content.

My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Indent first two lines of paragraph?

Hello,
I want to have an indent on the first two lines of my paragraph, how do I make this happen? I doesn't seem to be possible.
The only way I know of is to manually indent the second line. But as you can imagine that's not a very efficient way if this happens over 200 hundred times
PS: I use Indesign CS 5.5
Thanks,
Hamid

I didn't realize that the "A" in your screenshot was part of your layout (I thought it might be part of your example). Another not-so-elegant solution would be as follows: Starting with what you have…
…which are paragraphs with initial letters and tabs, create a rectangle shape with no fill or stroke, and give it some text wrap.
Select the rectangle, cut it, go to the text frame, delete the first tab and paste the rectangle inline between the letter and the first bit of the paragraph.
Now, select the inline object with the selection tool and drag it down until the text wrap causes the second line to indent.
Place the text cursor between the first bit of text (Cus, in my example) and hit the left arrow key while holding the shift key to select only the inline object. Then copy it to the clipboard. If you then use find/change to look for a tab ^t and in the replace field, click on the @ symbol to bring up the fly-out menu and select Other>Clipboard Contents, Formatted, you can insert the object in place of all of the other tabs, and it will look like this:
…or like this (in Preview mode):

How to capture first two digit in a number

Hi,
I have numbers with differeent lenth in a variable How to capture first two digit??
Thanks.

Hi,
We can achieve that using the following methods:
DATA : loc_1 type string,
loc_2(2) type c.
loc_1 = '123423428340923990'.
loc_2 = loc_1+0(2).
Here you will get only the first two digits.
You can use move statement also.
MOVE LOC_1(2) TO loc_2.
If you are having mixed string with characters and digits mixed together i.e. like this 'test01test03sample01'.
You can so that using this method.
data : lv_length type I.
loc_1 = 'test01test03sample0'.
LV_LENGTH = STRLEN( loc_1 ).
DO LV_LENGTH TIMES.
*&-- Read from first string validing the numeric fields and move your first two digits to the required variable --&*
ENDDO.
Hope it will be useful.
Regards,
Sakthi
Edited by: Sakthi Saravanan C on Oct 8, 2010 6:45 PM

How to write data in differt line in .txt file

Hi all,
I am tring to write data on one file using utl_file,
the first cursor loop write data on first line of the file using
utl_file.put_line(..........................);
end the second cusor loop write the data on secion line of the same file using
utl_file.put_line(..........................);
file format we are given as .txt;
problem we are facing is when we open the file in notepad all the data is showing in one line...
same file if we open another tools like edit plus, word pad etc it showing the write formate( line by line)
Can any one help on this we need to set any setups in note pad????????????/

As others have said it sounds like an operating system difference.
If your Oracle is installed on a unix based server then the file will be written using Unix style newlines which are just Line Feed characters.
In Windows environments a newline is considered to be made of the Carriage Return/Line Feed character pair, not just the Line Feed.
Some applications such as MS Word or Wordpad can read Unix style linefeeds and interpret them as you expect as a Newline. However Notepad doesn't.
When you transfer the file from Unix to Windows, usually this is done using an FTP based mechanism. If you transfer the files using FTP Binary mode, then every byte of the file is transferred as it is on Unix, and the file will essentially be a unix file on a windows system. If, however, you transfer the files (from Unix to Windows) using FTP ASCII mode, then whenever FTP encounters a LineFeed character it will convert it to a Carriage Return/LineFeed pair of characters, so that the file will appear correctly in Notepad. Likewise if you transfer files from Windows to Unix in ASCII mode, then Carriage Return/LineFeed pairs of characters are converted to just a LineFeed character so that the file becomes Unix compatible. Note, you shouldn't transfer binary files in ASCII mode as it can corrupt them, it's only intented for text based files.

How to skip first TWO Lines of .txt file using XSLT Mapping

Similar Messages

Maybe you are looking for