Review checklist - XI development

Hi,
Can you provide a set of useful points/checklist that we can use for reviewing XI work.
For e.g. i need to do a peer review of the scenarios developed by my team mates. it must cover sld, id, ir, alerts, mappings, proxies, bpm, adapters etc.
For a XI work based on PI 7.1, what could be additional review areas.
Thanks in advance.
Ganesh (g22sep).

Thats a nice idea .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/86bdc490-0201-0010-b9a2-b98373ea4dc4
There are many checklist available on XI and it can also be desinged as per the project requirement. However please some of the checklist which may be helpful for you in regards to XI:
Checklist - Making Correct Use of an Integration Process:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/98d06d5a-0401-0010-c7a5-ca3dad5a3cfc
Checklist: Making Correct Use of Mappings:
http://help.sap.com/saphelp_nw04/helpdata/en/d5/be364296f1b26be10000000a155106/frameset.htm
Checklist: Making Correct Use of Correlations:
http://help.sap.com/saphelp_nw04/helpdata/en/6d/94364296f1b26be10000000a155106/frameset.htm
Checklist: Making Correct Use of Dynamic Processing:
http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/frameset.htm

Similar Messages

How to do review of xi development?

Hi All,
Is there any tool or process through which we can review the
XI development. with which we can find out performence issues
or code defects.
And how can we review mapping that has been done using graphical mapping editor?
Thanks in advance,
Regards,
Ujwalkumar

Hi,
There are no tool for testing.
You can reveiw the development and test the object in the following way:
1) Check the business requirement and test the mapping using the testmesage tab in message mapping with the test data.
2) U can see the output with display queue.
3) For testing the end to end scenario if its file to file then
   1) put the file in the required directory
   2) check whether file is picked up or not go to RWB and check the status file adapter channel.
   3) Check the message monitoring tab for message flow
   4) Check the payload in SXMB_MONI
   5) Check the file at the target directory
   6) Check the communication channel in RWB.
Thnx
Chirag

VSphere 5.5 Design Review Checklist

In my new assignment, I am doing Design Review of a vSphere 5.5 Environment.
Is there a brief Checklist that mentions All the Best Practices; To get me started.
Thank You !

Hi,
Usually companies like IBM, VMware, HP, etc. have their own Reference Architectures.
A lot of Reference Architectures are posted publically by VMware. Try to search, if you can find the one which suits your needs.
If you work in one of the BIG companies, try to check your internal documentations.
Good Luck

Review the Mac Developer Program License Agreement

     I have alread agreed the Mac Developer Program License Agreement in Member Center.But why when I validate my app for upload,it warned me again of this.
     Anyone help me, because this problem i has been waiting for 16 days.
     Below is some screenshot:

This is not the place to discuss this. This is a user to user technical support forum for users of Apple products. This is not the forum for Apple developers.
You need to post your ssue and ask for help from your fellow developers in the developer forum.

Is there any way to print frames to a printer for review?

Hi People,
Flash is being used to develop our eLearning which needs to be reviewed during the development process. At the moment, we are doing screen caps from the final product, but I am wondering if we can print each frame directly from Flash. Can't see a print option so wondering if there is some workaround.
Regards
Andrew

you can use the actionscript printjob class.

Director, iOS and the (real) apps development cul-de-sac

Hi there.
I was a long time Director developer and I tried D12 to give it a shot with iOS app development.
After 2.5 months of research, an app submitted to Apple (still "in review"), another in development and a 3D game in its first design I have to summarize my experience.
1.
Developing simple apps and games seems very simple and easy.
Let's say that if the user don't have to interact with the keyboard, or use UI controls, app development is fluid.
2.
If you have to develop something with (even) a little user interface, you get crazy.
You have to re-invent the wheel and in doing it you're doing it wrong.
I developed a simple app, an app that does only one thing, but it does it in a very good way.
I started developing this app because there is no an app that does this thing, today.
First prototype? 4 hours.
Now I'm stuck in handling UI and UX, and I'm going mad.
There's no way to re-produce iOS controls (like radio buttons, checkboxes and fields) without appearing "cheap".
If the user have to insert something with the keyboard you get mad.
If you have the crazy idea to create a scrollable list (with selection) the performances become as slow as hell and the user responsiveness goes away.
I'm so so so sad for this.
I know Director Team is doing something great to bring us Director developers the possibility to easly port games from Shockwave to iOS.
But if you want to develop a real application (or something like that) you actually have no chances to pass Apple quality control.
That's it.
I just wanted to share my feelings with you.
Thanks.

Let me get this straight: I use Director since version 4, I always though that it's an incredible tool for multimedia development.
The dream was (just) using it to deliver iOS apps that can be a little better that the ones done with PhoneGap.
But...
The fact that it's so damn hard to put an app into the iTunes App Store (try not to develop "ad hoc" but for the store) that I think Adobe is just paying a low level rate to the remaining developers, I think that thereare two left, three maybe, and they have to do everything, so they don't write manuals or notes.
Or they just develop Director in their spare time.
Whatever you're doing, I respect you. Just as much I don't respect Adobe, who's gonna charge us for this not-enough-featuring (anymore) product.
One example: if you compile your iOS app for youriPad with the "Otto.app" template there's nothing wrong, but that template is outdated since may 1, 2013, so you cannot use it to upload your app to the App Store.
I'm trying to change all values, one by one, of the .plist included, but no luck for 72 hours (something like 50 attempts), and I'm so mad at it that I'm thinking about pulling the power cable on my (quite simple) project.

Urgent Requirement : Sr.Java Developer

Hi ,
We have an urgent requirement for the position of Sr.Java Developer
Location: Chicago, IL
Duration : Straight Hire-Full Time
Availability : Immediate
Description:
The primary role of the position is to design, develop and support application software for one or more business functions of the client.
The role will be related to the processing of new business/clients and setting up relevant workflow and processes.
This position is also related to ensuring integrity and quality in the technical development, security, and systems support practices.
Technical skills:
 Proficient in J2EE design and development
 Experience with Spring, Struts, and Hibernate frameworks
 database Strong development and design. Preferably SQL Server
 Understanding of Service-Oriented Architecture using web services
 Solid experience in XML using XSD and XSLT
 Good understanding of data distribution protocols using FTP or E-Mail
 have Must also strong web programming skills (HTML, JavaScript, AJAX)
for developing and maintaining web-based applications.
 Able to configure and install development tools and implement development environments
 Desired experience with Spring MVC
 Configuration management using Subversion
 Working knowledge of Linux and Windows
Other skills, and abilities:
 sphere IBM Web Portal experience
 Self-managing, in a fast paced development environment.
 knowledge Extensive of software development life cycle and accepted practices.
 and Strategic analytical thinking skills with an ability to solve problems and make decisions.
 of Knowledge .Net (C#)
 in Effective communicating with, and interacting with fellow team members on a technical and non-technical level
 Understanding of financial products. (Futures, fixed income, equities, etc).
Essential Functions:
 expertise Uses in appropriate techniques and tools to design, develop and maintain effective application software, reporting to technical lead.
 Participates to the development and implementation of standards related to the application development, security and system support activities.
 formal Performs and informal reviews of software development processes and products to ascertain quality and adherence to standards.
 Establishes and maintains control procedures for version control.
Monitors and tracks quality related issues and problems through to resolution.
Reports To: Technical team leader
Works With: Customers, Business Managers, Functional Project Managers, Technical Project Managers, Developers
Please send your updated resume ASAP.
Thanks and Regards,
AVVAL
Mohammed Wajid
Making IT Better
Regency Towers Center
Tower Floor
1415 West 22nd Street
Oak Brook IL 60523
[email protected]
http://www.AVVAL.com
Dir:
630.929.3096

¿do you need Functional Consultants? I mean people knowing at a great extent the main functionalities of Oracle Applications?
If so, can you inform the modules?

Technical Specification Peer Review Document

Hi Team
right now i am working in a implementation project where PI system is a middleware system. here i am developing several abap related and PI related objects for that i have developed some Techincal specifications and now my requirement is to do the technical specification peer review. so I want to know more details about technical specification peer review document. Please tell me what is technical specification peer review document and why is used in detail. if possible please provide me the sample technical specification peer review document for my reference. i request you to please explain me more details about the technical specification peer review document because i am having much knowledge and now there is a requirement for me to do technical specification peer review and update in the template, so please do provide me the sample techincal specification peer review template for my better understanding. Thanks in advance.
Regards
Raj

Hi Raj,
I never com across Technical Specification peer review document, We develop TS for every interface which covers
1)Bussiness reuirement
2)Trchnical Description in deatil
3)Bussiness Flow
4)Source and Tget data fromats description
5)Mapping Logic
6)Which adapters are you going to use,ad you need to specify all obejcts required for this interface/developed for this interface
whick convers SLD,ESR,ID ...
fter completion of evry interface we updates the all deatils in TS,then we need to review the same TS.if anything misses of we need to document the same.May be you need to develop one template for to note down all review comments...
Regards,
Raj

Code review tools

Are there any code review tools for WLP 7.x

Hi,
You can search in SCN for related articles and blogs.
ST05 and SE30 are tools which you can use for performance improvement. Use the tips and tricks in SE30.
Code Inspector and Extended Program Check will help you in efficient programing.
There are several other things which you need to follow as follows:-
1. Proper Naming Convention of variables for better code understanding.
2. Avoid nested selects.
3. Avoid nested loops whenever possible.
4. Use of SORT and BINARY SEARCH in READ statements wherever possible.
5. SY-SUBRC checks wherever needed.
6. Avoid ZERO DIVIDE errors.
7. Use of FOR ALL ENTRIES as needed.
8. Better handling of messages and exception.
9. Avoiding endless looping.
These are some points. You can add more as per your knowlegde.
Create a code review checklist document and ask your developers to follow the same.
I can share a template if you need.
Regards,
Ankur Parab
Edited by: Ankur Parab on Sep 17, 2009 3:20 PM
Edited by: Ankur Parab on Sep 17, 2009 3:34 PM

Develop sliders respond really slow

Upgraded to LR 4.2 + Update, and the sliders still works very slow.
I have a machine with 8GB + i7 370K + Nvidia 560 Ti + Dell U2711 (27" monitor).
Any Ideas?
Thanks.

ktgw wrote:
Hi,
My system is running with 8GB of memory and a core i5 CPU.
Lightroom is installed on an SSD drive and the catalog file is located on the same SSD drive as well.
The SSD drive has a lot of space free (at least 10 GB).
I'm using a Dell U2711 monitor (native resolution 2560x1440).
The most interesting thing is that if I adjust lightroom window size, then the development sliders work very fast.
LR is a non-destructive editor that never writes or changes the original file. PS is a destructive pixel editor that also caches multiple copies of the edited file in memory to speedup "undo" image building. PS4-6 supports Open GL, which uses the graphics processor for processing certain image views (Rotate, 3D, etc.). LR and PS work entirely differently concerning onscreen image building, and LR benefits very little by increasing graphics card performance.
A faster system processor will make LR more responsive with a high resolution display, but simply keeping the Loupe image smaller when adjusting sliders in the Develop module will do the same thing. My system is only slightly higher performance (i7-280, 12GB) and I have no issues. BUT my monitor is 1920 x 1080 (~2Mp) versus 2560 x 1440 (~3.7Mp). Your processor needs to build almost twice (2x) the number of pixels every time you make a change in the Develop module. If my i7 system performance is about 1.5x your i5 system, then screen response time will be almost three times faster ( .3 to .5 Sec. versus 1.0 to 1.5 Sec.).Using dual high resolution displays is even more challenging for LR.
Try making the Develop module side panels as large as possible by dragging the border with your mouse, and perhaps increase the height of the filmstrip. Then use CTRL + SHIFT + F Key to enter and exit full screen mode for a larger image review of your Develop setting changes. On my system this takes about 1.0 sec., so this may not be a time saving option for you (i.e. ~3.0 sec.). Give it a try.

Coding standards for Web dynpro ABAP

Hello all,
Can anybody please help me by providing the code review checklist for Web dynpro ABAP?
Thanks and Regards,
Rohini Shankar

Hello friend,
WebDynpro     *
1     Do not implement Data intensive operations in UI layer
2     Avoid database selects in the WebDynpro code.Use the corresponding BAPIs ,Methods
3     Are ABAP OO Classes like Assistance class are being used for application coding ?
4     Are Windows/Views only used for the sole purpose of hosting views and context?
5     Are a reasonable number of views put in a single WD Component instead of creating multiple WD Components ?
6     Unneccessary usage of dynamic programming and dynamic component avoided
7     Are singleton nodes used in case of nesting in the context ?
8     Is deep nesting of containers, Groups and Tabstrips avoided ?
9     Is the UI element TreeByKey or TreeByTableNestingColumn used instead of the Tree UI element ?
10     Is the checkbox "Accessibility Checks Active" ticked in the WD Component properties
11     Are the WD Component Instances deleted when no longer needed (IF_WD_COMPONENT_USAGE=>DELETE_COMPONENT)
12     Are the OTR texts defined for all the labels, texts(where ever appropriate) in properties of all the UI elements
13     Has the Generation limit been checked for all the components developed
14     Sufficients commets are written at the beginning of every major block to explain the processing logic.
*Error Handling     *
1     Is SY-SUBRC checked after CALL function modules
2     Use Assertions if you face unexpected errors which usually never ever occur!
Extended Check and Clean Up
1     Have following been removed :
     ·      Unused variables
     ·      Unused text elements
     ·      Unused tables from TABLES statement
     ·      Commented out parts of the code
     ·      Code segments which do nothing
2     Is extended program check completed and all errors/warnings removed
These are the things which i used for my project.
Thanks,
Sri Hari

Java API's supported in the Jdeveloper, IAS, and RDBMS product components

If there are any technical errors or "mistatement of the facts" in this posting, please let me know about them ..
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
PURPOSE
This article describes the "Enterprise Java Beans" (EJB), "Java Server Pages"
(JSP) and servlets Application Programming Interfaces (API) supported by the
Oracle products, Jdeveloper, Internet Application Server (IAS) and the Oracle
RDBMS release 2 and release 3, also known as Version 8.1.6 and 8.1.7,
respectively.
SCOPE & APPLICATION
All parties interested in the Java API's supported by these products.
Java API's supported in the Jdeveloper, IAS, and RDBMS product components
JDEVELOPER
JDEVELOPER is Oracle's Java development tool designed for coding / development,
testing / debugging, and deployment of Java Applications to the IAS and
RDBMS platforms.
With the java software api's being in a constant state of evolution, each new
release of Jdeveloper adds support for the "then current" version of the java
software api's, if it does not already have it implemented.
JDEVELOPER SERVLET API JSP API EJB API
VERSION VERSION VERSION VERSION
3.2.X.X 2.2 1.1 1.1
3.1.X.X 2.1 1.0 1.0
NOTE :
Sun Microsystems and their advisory teams (Oracle is on it) is working on
"draft" specifications for the next version of all of these API's
EJB -------> http://java.sun.com/products/ejb/index.html
JSP -------> http://java.sun.com/products/jsp/index.html
Servlets --> http://java.sun.com/products/servlet/?frontpage-javaplatform
It is anticipated that future releases of Jdeveloper will continue to be
upgraded to include support for the next version of each api.
To obtain the latest information on Oracle's Internet Development Suite (IDS)
of tools, please review the "Internet Developer Suite" information located
on Oracle's technet web site at :
http://technet.oracle.com/products/index.htm
IAS
IAS is Oracle's next evolution of the web server and application server
product technology superceeding the Web Application Server (WAS) and Oracle
Application Server (OAS) product lines.
IAS SERVLET API JSP API EJB API EJE VERSION
VERSION VERSION VERSION VERSION SUPPORTED
9I(1.0.2) 2.2 1.1 1.1 817
8i(1.0.1-NT) 2.0 1.0 1.0 816
8i(1.0.0-UNIX) 2.0 1.0 1.0 816
The IAS product contains two Java Virtual Machines (JVM) within it's
architecture.
They are called :
1) APACHE JSERV servlet engine
2) ORACLE ENTERPRISE JAVA ENGINE (EJE)
APACHE JSERV servlet engine
The APACHE JSERV servlet engine is an EXISTING product licensed from the
apache group which supports the servlet api 2.0.ONLY.
The APACHE JSERV product does not support ANY JSP's unless the customer
installs a third party jsp engine.
The IAS 8i/9i which has the APACHE JSERV product embedded in it, comes with
Oracle's JSP engine (OJSP) already integrated into it. OJSP supports JSP's up
to the specific JSP engine version documented in the Oracle Universal
Installer (OUI) for the 8.1.7 RDBMS or the IAS products. It is also documented
in the product's release notes.
Oracle ENTERPRISE JAVA ENGINE (EJE)
The EJE formerly known as :
1) Oracle 8i Java Virtual Machine (JVM)
2) JSERVER component,
3) Aurora JVM
was originally releas ed in the RDBMS 8.1.5 database with jdk 1.1.6 based java
support.
The currently supported versions of the Oracle 8i RDBMS, versions 2 and 3,
also known as Version 8.1.6 and 8.1.7, respectively, provides a jdk 1.2.1
based java virtual machine support.
"EJE" Version 816
This EJE, found in rdbms 8.1.6 and IAS 8i, contains support for the ejb
api 1.0, corba, and java stored procedures.
"EJE" Version 817
This EJE, found in rdbms 8.1.7 and IAS 9i, contains support for the ejb,
corba, and java stored procedures as well as the Oracle Servlet Engine (OSE)
which provides support for the servlets 2.2 api and JSP 1.1 api.
Note :
EJB support in the "EJE" Version 817 has been upgraded to comply with the EJB
1.1 api specification which includes "entity beans" support.
What is the bottom line ??
1) Servlets deployed to the APACHE JSERV must comply with servlet api 2.0.
2) Servlets 2.1 or higher are only supported in EJE's OSE component found in
the rdbms 817 or ias 9i products. Servlets api 2.0 can also run in the OSE.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf
2) "Whats New? Oracle8i JVM Accelerator, Oracle Servlet Engine, OracleJSP ..."
located at :
http://technet.oracle.com/products/oracle8i/pdf/504.pdf
3) "Oracle8i Release 3 New Features Summary" located at :
http://technet.oracle.com/products/oracle8i/pdf/8iR3_nfs.pdf
null

which jvm is used by jserv ?? EJE or a separate jdk ?
The Jserv servlet engine is running in a separate jdk JVM external to the EJE jvm which is embedded within the "database" component of ias and the RDBMS.
See the reference below for more details ...
if jserv only support old apis, why it is in oracle's products ?
i would assume that the oracle servlet engine was under development when ias 8i was released and became available in time for the ias 9i and rdbms 817 products.
looking back in history leads me to believe ias 8i was a migration path to get to ias 9i or rdbms 817.
Based upon the long history of new releases of every oracle product being upgraded with new features, it's reasonable to assume that these products will continue to evolve.
when I deploy a jsp how to deploy in the right servlet container ("EJE") ?
as documented in the reference below, you can deploy JSP's to either the apache jserv jvm or the EJE since the ORACLE JSP engine functionality is in both jvm's.
there are many posts where you can see that people have deploy in jserv and they have problems because they don't use the right container (servlet 2.0 instead of
servlet 2.2) http://technet.oracle.com:89/ubb/Forum2/HTML/006349.html
when ias 8i came out this was clearly an issue since servlet support was at api 2.0, and the current servlet api was probably at 2.1.
oracle clearly made every effort to get ias 9i released quickly to supply a servlet 2.1 and 2.2 capable engine to resolve this issue.
since ias 9i and rdbms 8.1.7 are available this is no longer an issue.
The reference below explains the architecture and understanding it would eliminate a lot of "deploy to the wrong ias 9i component" issues.
so why jserv is bundled with oracle 8i/9ias since EJE support the right api version ?
if in ias 9i release , oracle had removed the jserv component without any advance warning, many customers would have been very upset since oracle makes every attempt to give advance notice before removal of functionality.
References
1) "Oracle9i Application Server Technical White Paper" located at :
http://technet.oracle.com/products/ias/pdf/9ias_102.pdf

WebHelp search generated by RoboHelp 8 not working in Safari 5.0

Hello,
I'm new to the forum, but have been lurking for a while, and have benefitted greatly from answers found here. Thanks!
I use RoboHelp 8 HTML - recently upgraded from X5 - to generate WebHelp for a cross-browser compatible web app. I generate using the DHTML > Pure HTML option, and Safari is using the DHTML version. I use 'traditional style (no skin),' 'Optimize speed for: Local PC or Intranet'.
The Help seems to work fine in Safari for Windows, but now with the recent update to Safari 5.0, the Search functionality is not working at all. The search tab displays properly, but upon entering text and pressing Enter, nothing happens. It works in all other major browsers, except Opera which gets the Pure HTML version, and there I hid the search tab all together because it's unacceptable in that state.
The only customization I've done is swap out the tab images, and insert a little css to hide (display:none;) the "limit search results to __" option as it was getting cut off in every browser, and I couldn't figure out why, or how to fix it.
Any ideas? Anyone else seeing this?
Thanks for your anticipated help!

Hi there
Your mention of:
I still think this deserves attention, and would like to hear what others think.
Seems to imply you feel I was attempting to make you shrug it off. I wasn't. I was attempting to coax you (and anyone else) to submit the Bug Report. You have no idea how critical this aspect is. I see you made no mention of doing that so I'm assuming you ignored the suggestion.
Many folks have the grossly mistaken belief that the Bug Report/Wish Form just sends information to a circular file where it is never acted upon or seen again and as a result, you have had your say and it makes you feel better for getting it off your chest. But these things are actually reviewed by the development team. Each and every one of them. You may not get a personal response for each one you submit, but sometimes you do!
As for changing the verbiage, click File > Project Settings > General and look at the LNG File tab of the ensuing dialog. You are able to influence all manner of verbiage in that little gem.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

How do you set repeat events for a given day of the week

How do you set a repeat event in calender for a given day of the month. Expample 3rd Wednesday each month?

Have you read the app store guidelines yet?
App Store Review Guidelines:
http://developer.apple.com/appstore/resources/approval/guidelines.html
Don't go on what you've seen in the store - for every example you spot, there are hundreds that didn't make it in.
As well, Apple is tightening up on reviews, etc.
Loads of discussion on this in the iOS Dev Forums, BTW

Using i-prefix in an app name

Hello,
1- Can I use i-Prefix in an app name like in iGame or iSaw?
2- Is it allowed to put an unknown coach's name in the app "Mr. John's Tips"?

1.) You wouldn't be the iFirst....just know that there is no one here that can promise what will and won't be accepted.
2.) Do you have legal rights to use another person's name? Apple may ask...
App Store Review Guidelines:
https://developer.apple.com/appstore/resources/approval/guidelines.html
Prepare for App Submission
App Store Submission Tips

Review checklist - XI development

Similar Messages

Maybe you are looking for