RFC Adapter error - http port configuration

Hi everyone,
on XI 3.0 I have some problems to invoke RFC functions located on a SAP SRM system.
No logs are displayed on the XI Monitor: the message is stopped at the "adapter" level.
It seems that RFC adapter tries to connect to a wrong URL (the Production system URL)and obviously it retrieves these messages:
"Received XI System Error. ErrorCode: NO_RECEIVER_CASE_BE ErrorText: ErrorStack: No receiver could be determined "
"Returning synchronous error notification to calling application: XIServer:NO_RECEIVER_CASE_BE:."
"Transmitting the message using connection http://YYY.sap.xxxx:8066/sap/xi/engine?type=entry failed, due to: XIServer:NO_RECEIVER_CASE_BE:."
In the SLD, the right port for Development system is 8064, the adapter is also configured on business landscape YYY and port 8064. I checked both J2EE visual administrator and Business Landscape customizing without success.
But at runtime the adapter framework point to another system on 8066 http port (and the interface call fails).
My question is: where is this wrong URL configured and from where exactly does it take these wrong informations?
Please, help me.
Alessandro Pozzozengaro.

Alessandro,
There is a very good document on SAP that explains, step-by-step what you are trying to do.
The name of the document is: 'Validating a Connection Between SAP R/3 and SAP XI with RFC'.
Give a look on that. I used it to build the scenario here and it works fine.
Regards,
Tadeu

Similar Messages

XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT

I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula Patel

I'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks.

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

RFC synchronous error HTTP

We have a strange problem. We try a simple scenario file-->RFC (Bapi) (synchronous). But it won't work, in asynchronous way it is no problem, that works great.
The strangest thing is that we don't get the 2 messages on the monitor (in asynchronous way we get the 1 message).
Once we did get the message, here it is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://sapdev:55000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://sapdev:55000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://sapdev:55000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br>Connection timed out (-5) <br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Thu Apr 28 11:13:48 2005 </td></tr> <tr><td>Module:</td><td>icxxthr.c</td></tr> <tr><td>Line:</td><td>2559</td></tr> <tr><td>Server:</td><td>SAPDEV_XI1_50</td></tr> <tr><td>Detail:</td><td>Connection to partner timed out</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2003, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack><b>Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)</b></SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
At first we thought the error was the http_timeout, so we raised the number but the problem was the same. The RFC adapter works fine, so that isn't the problem.
any help would be great...
TIA

Hi Bart,
Did you put a business process between the File (async) and the RFC (sync)? Because you can't connect async and sync interface without a BPM.
Cheers,
Frank

Sender RFC adapter Error- request was null while trying to extract it.

Hi All,
I have a scenario running in Production(PI 7.0 system) where SAP ECC sends RFC request through sender RFC adapter. The scenario was working fine but now I am getting the below error in default trace and I couldn't see any error in communication channel monitoring.
java.lang.Exception: RfcServer[BAS_ECC_RFC_Snd]1[AFSenderD] request was <null> while trying to extract it.
I have gone through the below thread and performed a full cache refresh but it didn't help :
[NULL]
I have gone through SAP note:730870 and I couldn't get any help on this error. Can you please suggest your ideas to solve this issue.
Thanks & Regards,
Laawanya

Hi Lawanya,
Check you RFC and input data , whether the RFC call is able to get the data from ECC or not.
you can test the same RFC in ECC with input data and you can check whether the RFC in ECC is return the value or not.
I gues in your case the RFC in ECC is not return any data to PI.

Receiver RFC Adapter Error

Hi All,
I have a file to RFC scenario. I keep getting the below error: Any Ideas?
Danny,
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found..

is this BAPI an SYNC one
check this link
RFC adapter Call BAPI error
Re: Invoice Not getting posted

Receiver XI adapter error :HTTP Status Code 200 during Reponse Parsing

Hi Exeprts,
My Scenario is mail to ABAP proxy , I have got the bellow error in moni while testing my secnario .
Please help me reslove this .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards
Upendra

Hi Mark ,
No error message in attachement . only it daisplay the following information
SAP Library
SAP Library contains the complete documentation for SAP NetWeaver Application Server Java. You can access it by choosing SAP NetWeaver.
      SAP NetWeaver Administrator
A powerful administration, configuration and monitoring tool, which bundles key administrative tasks to keep your SAP NetWeaver system landscape running. SAP NetWeaver Administrator can be used in a central or local scenario. Here you access the local NetWeaver Administrator.
    System Information
System information provides administrators with an overview of the system configuration and its state. It shows all of the system's instances and processes, their current state and important parameters (such as ports) that may be required for support cases, as well as the versions of the components installed.
      Services Registry
The Services Registry is a UDDI based registry that contains definitions of enterprise services and references to their metadata.
   User Management
The user management administration console provides administrators with the functions they need to manage users, groups, roles, and user-related data in the User Management Engine (UME). Users without administrator permissions can use it to change their user profile.
      UDDI Client
The UDDI client provides query and publishing functions for UDDI entities to any UDDI compliant registry.
   Web Services Navigator
Web Services Navigator is a tool that gives you a short overview of a specific Web service based on its WSDL, and enables you to test your Web service by creating and sending a client request to the real end point.
      Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
Regards
Upendra

RFC adapter error

Hi Experts ,
I have ascenario from ECC to file . I have rfc destination created and given the programid correctly.Checked the RFC connection
The error is as follows:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '*', fromService 'UCD_ECC_60', toParty '', toService '', interface 'Z_XX', NS 'urn:sap-' for channel 'CC_RFC_Mon_Appvl_Sender' (channelId c0a969bab7dc3250b65a426e026cebd1)
Please
Kiran

Hi Kiran,
Please check if you have created the sender agreement?
The below error says sender agreement not found
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found:
Regards,
Ravi

RFC adapter Error - any ideas what might be wrong ?

An RFC receiver adapter, ends in the following error. See below
No SNC was entered or used on Comm Channel, User exists, and is OK.
No idea why tickets SSO ticket is involved, this RFC with no SNC.
What setting to change or how to fix jco pool issue.
Any ideas?
regards
Phil
<b><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket received</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error></b>

HI Phil,
For more information about JCo pool, follow parge 10 of this link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
Also
refer to the SAP Library under SAP NetWeaver
>Application Platform (SAP Web Application Server) > Connectivity >Components
of SAP Communication Technology > Communication Between ABAP and Non-ABAP
Technologies > SAP Java Connector > SAP JCo Client Programming > Establishing
Connection to an SAP Server ® Connection Pools, or refer to the help of the SAP
NetWeawer Developer Studio for the description of the class JCO.Pool under SAP
NetWeaver Developer Studio Documentation ® SAP Web AS for Java Applications >
API WAS > Java Connector > com.sap.mw.jco > JCO.Pool.
Regards,
Sumit Gupta

RECIVER RFC ADAPTER ERROR

Hi,
I'm sending data from databse table to sap.I've create one ztable in sap and assign in tables staement in functionmodule.i wrote sourcode is
insert ZPERNR_POS from table intra.
sender side jdbc shows green colourand also rfc shows green color,but message shows wait status and it shows following error
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling ZINTRA_SAP_REPORTING in remote system (RfcClient[reciever_sap]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling ZINTRA_SAP_REPORTING
Pls help me.

Hi Ravi
First check the data in R/3 itself and test whether you can send data inside.
Check with your RFC FM it is remote enabled or not and your schema for imported RFC is fine or not. Else it will not invoke the RFC FM at R/3
Thanks
Gaurav

Error from RFC adapter

Hi,
I encountered an error while sending RFC from ECC5.0 to XI using RFC sender communication channel and TRFC. The error in the TRFC monitor is
com.sap.aii.af.rfc.afcommunication.RfcAFWEx
: lookup of alternative
Does anyone have an idea what might be causing this?
thanks.
James Chang

Hi,
Is it solved?
If not just check with RFC Destinations(SM59- Tcode). Also check with Cache Refresh.
RFC Sender Error
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope it helps,
Regards,
Moorthy

Adapter Errors

I am trying to trap the adapter errors using Alert configuration. When file content conversion fails, an alert message is raised correctly..
But the link goes to MDT instead of going to adapter monitor? MDT is usually empty in such scenario. Is there anything we can do to fix this?

In the ARLTCATDEF transaction, where the alert category is defined, one can add urls for optional subsequent activites....
If you want a link to the Adapter Monitoring page...add the url to that in this tab....the url for Adapter monitoring is http://<was_server>:5XX00/mdt/amtServlet
i have not tried this...but this might be worth checking..
Thanks,
Renjith

RFC Adapter to connect to Non SAP System

Hi,
I have a scenario to connect to a non SAP system using RFC adapter. I am not used to the same. I need to know whether this is possible and what are the steps to be done.
Thanks and regards
Siji

Hi,
These links should help.
Non-SAP application connecting to PI via Sender RFC Adapter
Error by setup RFC Interface with non SAP system
SAP PI to Third Party system through RFC Connectivity ??
Regards,
Jannus Botha

Error on Send Port configured using HTTP adapter

Hi All,
For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using
plain HTTP adapter.
We are getting below error after change:
A password is mandatory if UserName is specified
Parameter name: Password
Please advice.
Thanks
Pooja Jagtap Software Engineer KPIT Cummins

Have you updated the password for your Host instance . Try restarting your host instance once .
Thanks
Abhishek

HTTP Response code 404 - RFC Adapter des not connect to Integration engine

Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
     at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
     at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
     at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
Arul

HI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh

RFC Adapter error - http port configuration

Similar Messages

Maybe you are looking for