RFC for Web Service ALE_OUT

Hi
For the RFC connections for ALE_OUT and SAPWS_CMD_OUT, what should be the target host, service number and path prefix?
Is my understanding correct: These connections are for the system on which the device controller software is running? So if we use, say, Sun Java RFID software as the device controller, how do I determine/enter the service number and path prefix to be entered in this RFC?
Regards
Sankar

Hi,
>>>>how do I determine/enter the service number and path prefix to be entered in this RFC?
easily just check sun's docs and inside you will find the port and path
BTW
sun's docs are very good I found a lot of info about suns event manager
related to AII inside their docs (how to create RFC in AII) was also described
Regards,
michal

Similar Messages

Gettinfg error in RFC to Web Service scenario

hi friends,
I am getting the following error while configuring RFC to Web Service scenario.
I have used the ws :http://webservices.imacination.com/distance/Distance.jwsPlease help me out.

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. )</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi
check this thread
Getting error in target SOAP communication channel
regards
krishna

RFC - XI - Web service

Hi All,
I have a RFC -> XI -> Web service synchronous scenario.
After setting up scenario in XI, I execute RFC. When I check sxmb_moni, it shows me error.
The error is pasted here.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: failed to get the input stream from socket: java.lang.NullPointerException</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can somebody explain me, why is this or to cross-verify my settings, steps in detail to set up this type of scenario.
Please don't take me to the documentation present here which explains about configuring Web service based scenario.
I have already looked at it and understood that it's not much useful at this stage.
Your help is highly appreciated.
Thanks & Regards,
-smita

Hi Smita,
How are you doing the communication from FRC ==> XI ??
1. Are you using Outbound(sender)RFC Adapter, if so did you create a registered program for communication from r3 to XI (rfc destination
sm59->tcpip)
2. Are you using an outbound(Sender) Client abap proxy??
3. Are you calling an external webservice(not in XI)if
so make sure the soap action is correct
Naveen
Message was edited by: Naveen Pandrangi

Synchronous RFC-XI-Web Service with no request method

Hello guys,
I'm trying to set up an RFC-XI-Web Service scneario. But with the particularitity that the WSDL does not have a request method. It only has a very simple response method.
How can I make this? How can XI call the Web Service, if I dont have any request method?
Thanks for your help.
Felipe

Matias, after some test I think that VJ is correct.
It is failing at the moment of delivering the message to the WS, I'm getting the followin error messages:
com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/PLAIN; HTTP 302 Moved Temporarily
I tested the WS with XMLspy and works correctly.
I'm starting to believe that the best solution is to simply create a dummy request in the WS.
It would be great if someone else test in their own and see if we get the same result. Thanks,
Felipe

Expose RFC as Web Service

Hi Guys;
Can anyone provide me step by step procedure for RFC to Web Service scenario?
meaning to expose the RFC as Web Service in the SAP CRM?
Thanks
Kfir

Hello Kfir,
You can host webservice by doing the below steps:
Login to CRM system and goto txn:BSP_WD_CMPWB
Give component as :WS_DESIGN_TOOL
Hope this helps!
Best Regards,
Shanthala Kudva.

Re: Why doesn't WL7.0 support get/post bindings for web services ...

hi!!!
Could you pls point to any code example.
thanks
Pushpa
"Richard Berger" <[email protected]> wrote:
>
Manoj: Thanks for the answer - do you have or can you point me at any
code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their
get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer
and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for meto
access a
web service, I need to write a "middle tier" of some sort (I used
the
automatically
generated Java proxy code and JSP). All works fine, but it seems
like
it
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that
BEA
chose not
to provide this feature? (e.g. is it architecturally unsound in anyway?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL definesWeb services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols areused
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

This isn't a straight FORM Post as in the http binding support in WSDL. It posts
a soap message.
It's apparent that Workshop supports form-post and form-get.
But I dont see how it is done with straight WebLogic webservices. Does WebLogic
server read the web-services.xml or the WSDL file? I dont see a way to put in
http-post binding in the former and in the latter it seems to be ignored.
Can someone clarify.
Thanks.
Chu-chi
"manoj cheenath" <[email protected]> wrote:
Here is a live example:
http://65.193.192.35:7001/base/SoapInteropBaseService
Here is an example that you can download:
http://manojc.com/?sample2
This is how you run it:
http://manojc.com/?tutorial/doc/howtorun.html
More info can be found from the edocs:
7.0:
http://edocs.bea.com/wls/docs70/webserv/index.html
8.1:
http://edocs.bea.com/wls/docs81/webserv/index.html
Regards,
-manoj
http://manojc.com
"pushpa krishna" <[email protected]> wrote in message
news:[email protected]...
hi!!!
Could you pls point to any code example.
thanks
Pushpa
"Richard Berger" <[email protected]> wrote:
Manoj: Thanks for the answer - do you have or can you point me at
any
code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their
get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer
and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for
me
to
access a
web service, I need to write a "middle tier" of some sort (I used
the
automatically
generated Java proxy code and JSP). All works fine, but it seems
like
it
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that
BEA
chose not
to provide this feature? (e.g. is it architecturally unsound in
any
way?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL
defines
Web services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols
are
used
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Why doesn't WL7.0 support get/post bindings for web services ...

This might be a naive question, but according to the documentation, WL 7.0 does
not support http post/get bindings for web services. Thus, for me to access a
web service, I need to write a "middle tier" of some sort (I used the automatically
generated Java proxy code and JSP). All works fine, but it seems like it would
sure be nice to have HTML forms access web services without having to write a
middle tier.
.NET does this and it is extremely useful - is there a reason that BEA chose not
to provide this feature? (e.g. is it architecturally unsound in any way? or is
there an easy way to simulate it?). Given some of the Web Workshop positioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL defines Web services
as a set of endpoints operating on messages; these message contain either message-style
or RPC-style information. The operations and messages are described abstractly
in WSDL, and then bound to a concrete network protocol and message format to define
an endpoint. Related concrete endpoints are combined into abstract endpoints (services).
WSDL is extensible to allow the description of endpoints and their associated
messages regardless of what message formats or network protocols are used to communicate,
however, the only bindings described in the specification describe how to use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Manoj: Thanks for the answer - do you have or can you point me at any code samples
that accomplish this? (Yes, .NET is limited to strings/ints in their get/post
bindings).
Thanks so much!
RB
PS - Also, can you explain any apparent discrepancy between your answer and what
the WL documentation stated (again, it may be my misunderstanding).
"manoj cheenath" <[email protected]> wrote:
WL 7.0 does allow you to access the web service through
the browser. It even allows you to invoke service methods
with complex type arguments (.Net only supports primitive
types) and also to view the request and response soap
message for the invocation.
regards,
-manoj
"Richard Berger" <[email protected]> wrote in message
news:[email protected]...
This might be a naive question, but according to the documentation,WL 7.0
does
not support http post/get bindings for web services. Thus, for meto
access a
web service, I need to write a "middle tier" of some sort (I used theautomatically
generated Java proxy code and JSP). All works fine, but it seems likeit
would
sure be nice to have HTML forms access web services without havingto
write a
middle tier.
NET does this and it is extremely useful - is there a reason that BEAchose not
to provide this feature? (e.g. is it architecturally unsound in anyway?
or is
there an easy way to simulate it?). Given some of the Web Workshoppositioning
re: ease of use and .NET comparison, this seems like an omission.
Any insights are greatly appreciated.
Enjoy,
RB
PS - Here's the info from the documentation
Web Services Description Language (WSDL) 1.1 Specification
WSDL is an XML-based language that describes Web services. WSDL definesWeb services
as a set of endpoints operating on messages; these message containeither
message-style
or RPC-style information. The operations and messages are describedabstractly
in WSDL, and then bound to a concrete network protocol and messageformat
to define
an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
WSDL is extensible to allow the description of endpoints and theirassociated
messages regardless of what message formats or network protocols areused
to communicate,
however, the only bindings described in the specification describehow to
use
WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
Note: WebLogic Server supports only SOAP 1.1 bindings.
The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

RFC- XI- Web services

Hi All,
We are configuring RFC->XI->Web Services scenario.
We are using SOAP adapter in the receiver side. We are getting the following error message.
soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: ConversionRate. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing).
Kindly help.

Hi,
Quick checks-
1) Reciever SOAP Adapter configuration
2) Check the Target URL - it should be wsdl URL
3) Transport protocol used (HTTP)
Check this blog about SOAP Adapter Configuration carefully-
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
Regards,
Moorthy

Best book for Web Services

Can you suggest me what's best book for Web Services and XML to study? I'm planning to buy..
Thanks in advance..

Why does it need to be the best one? What would that even mean? Just buy something reputable, like an O'Reilly book, it's not going to be so horrifically poor that you can't learn from it

How to activate trace for web services

Hi Experts,
How to activate trace for web services in SOAMANAGER.
We are not able to view the Payload trace of the error logs.
Can anyone please let me know how to go about this???
Regards,
Ashwini

Hi Ashwini,
The thread below might be useful to you:
[SOAMANAGER - Get the XML generated;
Regards, Trevor

Building client proxies for web services with SOAP attachemtns

Hi all.
I'm currently building a series of web services that take SOAP attachments as
input, but I am unable to generate the java proxies for testing the services via
WebLogic Workshop 8.1. When I attempt to build the proxy, I get the following
error:
Warning: Failed to generate client proxy from WSDL definition for this service.
Suggestion: Please verify the <types> section of the WSDL.
Is there something I need to alter to get this to work, or does workshop not support
client proxies for web services with DataHandler parameters?
Thanks.
-Brian

Thanks for the help. This is my first web service with SOAP attachments, so it
may have been a long time till I realized that.
-Brian
"Michael Wooten" <[email protected]> wrote:
>
Thanks Brian,
The problem is that you are trying to use the "document" soap-style :-)
If you change this to "rpc", you'll should be able to successfully generate
the
client proxy jar. The soap-style property, is at the bottom of the "protocol"
property sheet section, for the JWS.
Regards,
Mike Wooten
"Brian McLoughlin" <[email protected]> wrote:
Sure, sorry about that. Attached is the wsdl for a sample web service
I created
just to test the proxy generation.
"Michael Wooten" <[email protected]> wrote:
Hi Brian,
Would it be possible for you to post the WSDL, so we can see what might
be causing
the problem?
Regards,
Mike Wooten
"Brian McLoughlin" <[email protected]> wrote:
Hi all.
I'm currently building a series of web services that take SOAP attachments
as
input, but I am unable to generate the java proxies for testing theservices
via
WebLogic Workshop 8.1. When I attempt to build the proxy, I get the
following
error:
Warning: Failed to generate client proxy from WSDL definition for
this
service.
Suggestion: Please verify the <types> section of the WSDL.
Is there something I need to alter to get this to work, or does workshop
not support
client proxies for web services with DataHandler parameters?
Thanks.
-Brian

Stub for web service in JSP

How do i embed a scriptlet inside my JSP page for the stub of my web service? is there any examples that i can refer to?
Thanks in advance. ;)

Check out the 2 How To:
9.0.4 / 10.1.2 "How to use OC4J JSP Tags for Web Services" [1].
10.1.3 (preview) "Access J2EE 1.4 JAX-RPC Java Web Services from Web Clients" [2].
Hope this helps,
Eric
[1] http://www.oracle.com/technology/sample_code/tech/java/codesnippet/webservices/wstags/index.html
[2] http://www.oracle.com/technology/products/jdev/101/howtos/jaxrpc/java14_ws_web_clients.html

About XML Parameter for Web Service invoking

I would like to use the XML parameter as the Web Service's input(Attachment is
the XML schema) in WebLogic Server 8 sp1. When I generated the Web Service and
use the WebLogic Server generate test web page to test it, I got Exception. The
WebLogic Server can't constructe the input XML.
The correct XML should look like this:
<ids>
<desc>Description</desc>
<id>1</id>
<id>2</id>
<id>3</id>
</ids>
Is there any one can tell me whether this kind of XML was permitted for Web Service
invoking or not?
[sample.xsd]

Hi Andy,
On the test page, before the invoke of the operation, did it say
something like:

if so, the service itself may be working OK, the deficiency is that the
test page tries its best to determine sample values for the invoke,
however it does not know in this case.
Did you try with a client?
Your XML should be fine.
Regards,
Bruce
Andy wrote:
>
I would like to use the XML parameter as the Web Service's input(Attachment is
the XML schema) in WebLogic Server 8 sp1. When I generated the Web Service and
use the WebLogic Server generate test web page to test it, I got Exception. The
WebLogic Server can't constructe the input XML.
The correct XML should look like this:
<ids>
<desc>Description</desc>
<id>1</id>
<id>2</id>
<id>3</id>
</ids>
Is there any one can tell me whether this kind of XML was permitted for Web Service
invoking or not?
Name: sample.xsd
sample.xsd Type: ACT Project (text/xml)
Encoding: base64

(261936172) Q general Are there seperate logs for web services?

Q<general> Are there seperate logs for web services?
A<general> It does not appear that there are any separate logs for web services.
There is knex.log file that records the errors that occur during deployment of
your .jws files. There is also the standard server log that provides information
about server status - you can write to this programmatically if you wish. There
is also the access.log file which record all the HTTP requests so this might cover
some of your web service requests that are transmitted over HTTP.

Maybe the user has deniad Access to the Runbook, check in Runbook Designer.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

RFC for Web Service ALE_OUT

Similar Messages

Maybe you are looking for