RFC Sender Problem. Pls advice
Hi All,
I have a RFC interface between Sap R/3 and XI.
I am getting error in SM58 in R/3 :
Commit fault com.sap.aii.af.mp.module.ModuleException: call to messaging.
If I do test connection on in SM59 on TCP connection it's ok.
For the above error I also receive for some time the below SLD error message in RWB of XI
"Error during communication with System Landscape Directory: HTTP response code: 503 (Not Ready)"
Please advice
Regards
Hi Rick,
commit fault error is seen in SM58 when there are more transactions to the database parallely . ask your basis guys to increase the screen numbers in the database.this error wont come again.
thanks.
Similar Messages
-
Rfc sender problem(sap r/3 -se37) 'alternativeServiceIdentifier: party/serv
Rfc sender problem: While executing the rfc in sap r/3 system
It is showing abap run time errors are
'alternativeServiceIdentifier: party/service from channel
configuration are not
(i have taken hint from this weblog /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step)
These are the configuration at sap xi and sap r/3 system
1) SAP XI (ID)
I have created rfc sender commuication channel in I.D.
Rfc server Parameters->
A.S.(Gateway)-> server {sap r/3 server name}
A.S.S.(Gateway) -> sapgw00
program id -> PDPT
AND RFC Metadata repository parameter
2)SAP R/3 (SM59)
Rfc destination -> PPPP
Connection type -> T
Technical Settings->
(*) Registered Server Program
Program ID -> PDPT
Gate way options
Gateway host -> server
gateway service -> sapgw00
Testconnection-> connected
3) testing rfc at sap r/3(se37)
But when i am executing a rfc in sap system
Rfc target system -> PPPP
and some import parameters
and it is showing the error message as
'alternativeServiceIdentifier: party/service from channel
configuration are not '
4)SAP R/3( SMGW)
CONNECTION TO CLIENT FOR PDPT(TP NAME) REGISTER STATUS IS WAITING
Please help me how to solve this problemHi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek -
RFC Sender problem between 46D and RFC adapter
Hi,
I have this simple integration scenario where I want to send data to a archiving system;
SAP -> (tRFC) -> XI -> (MQ) -> BizTalk -> (MQ) Arch.syst.
SAP side ***
A Z-program using a Z func. like;
CALL FUNCTION 'ZSD_DCF_SEND_TAG'
IN BACKGROUND TASK
DESTINATION 'XISYSTEM_TRFC_DCF'
EXPORTING
pt_filing_info = gt_filing.
COMMIT WORK AND WAIT.
XI side ***
Both IR and ID is configured correctly, in the development environment everything works just great. I have created a test program where I can define how many calls I will do, looping over the func. call with a commit inside the loop - 500 or more msgs are ok.
The integration scenario is transported to quality enviroment using CMS, and the RFC sender comm.ch. is configured accordingly.
The problem in quality ***
When sending just 1 msg, everything is just fine, message received and delivered to MQ.
When sending >= 2 msgs, the 1 msg is always ok, BUT all others fails due to the following from Adapter monitor;
RFC_HISTORY
- Error: 2006-01-19 10:55:18 CET: com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel 'RFCSender_XI0002' (02d4d30de3593874942ed0659add0827, party '', schema 'TechnicalSystem', identifier 'Q93#120')
- OK: 2006-01-19 10:55:17 CET: Message processed for interface ZSD_DCF_SEND_TAG
My sending system is Q93 CLI 505 so I can understand the error, BUT I cannot understand why the RFC adapter is saying the TechnicalSystem is Q93#120 - it should be Q93#505. My Q XI has client 120...
It seems to me that the RFC adapter is kind of confused about the sender..
I have created a OSS message and SAP has looged on and looked into it with both a XI expert and RFC expert without being able to answer - all is configured correctly.
- The SLD config. for bus.system Q93 is ok -
- The bus.system in ID is showing correct vaues for
Adapter Specific Identifiers (SID Q93, client 505)
- Both Dev. and Qual. environment are running on XI 3.0 SP 14 latest patch, RFC component version on the SAP side is identical between dev. and qual. SAP systems
- It doesn't matter which gw I use (Q93 gw or XI gw), the error is persistent
- It doesn't matter if I increase initial conn, max conn.
I have also tried to use qRFC instead, but with the same result.
Anyone using tRFC for asynch. communication from SAP to XI seeing something similar?
Meanwhile, I will do RFC trace on GW and RFC Adapter on AE....
Please, do not say SP15, oss msg for FAQ RFC adapter or links to RFCAdapter config....
best regards
TorsteinHi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek -
RFC Sender Problem...
Hi all,
I configured the RFC Sender communication channel in the XI . The RFC Server parameter and Metadata Repository for this CC, point to a R/3 Application System. In SM59 I configured the TCP/IP connection and it work fine.
Was configured, too, the Sender Agreement and Receiver Determination for the RFC message.
When I test the RFC call in XI server with the destination configured in SM59, the RFC is not processed in the target R/3 system and no message is returned. In the Channel communication I get the error: Message processed for interface ZBR_RFC_SD_BPMAG_START_WKFIORD: com.sap.aii.af.rfc.RfcAdapterException: failed to identify XML document:org.xml.sax.SAXParseException: Premature end of file.
Any idea about this error? Is there any configuration to set the username and password to connect wikth R/3 target system using this channel comunnication?
thanks.Hi,
>In the Channel communication I get the error: Message processed for interface ZBR_RFC_SD_BPMAG_START_WKFIORD
1) Check the User ID & password is Correct
2) With the help of Basis team Find it out whether the User Id has the RFC Role to Connect
3) From XI test the Connection..tcode Sm59 whether RFC Connection is existing between SAP XI & R3
4) Check Whether the Function Module - ZBR_RFC_SD_BPMAG_START_WKFIORD Exists
Regards
Sangeetha -
Webservice sender . Pls advice urgent
Hi Piyush/All,
My scenario is
System A (Webservice) -- XI -- File
System A is providing WebService(wsdl) to XI
So It is a webservice(wsdl) of System A.
XI will import that wsdl as External Defination and map to File Interface.
System A will send soap request to XI.
Can this scenario be made
1. Soap Sender Adapter --- XI --- File Receiver Adapter?
2. WebServer needs to be installed at System A?
Regards1 Soap Sender Adapter --- XI --- File Receiver Adapter?
ans:yes
2. WebServer needs to be installed at System A?
ans:yes
Check links on soap.
For SOAP see below links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
SAP AII - How to consume and expose webservices ? -
N96 text sending problem pls help!
Hi, i have a nokia N96, on friday it just stopped sending my texts,
the problem started as i was texting my friend as normal, then she replied saying she had got the same msg 8 times! since then all my texts have got stuck in my outbox!
whats going on?
I have backed up my contacts incase i need to restore the phone but i want to avoid doing that if possible as i dont want to loose my photos and music (unless someone can tell me how to back those up too!)
Can anyone offer any advise, other than chuck it accross the room?!
Oh and also, i have 2 multimedia msg in my inbox that wont delete! could this be causing the problem? When i try to delete it says "already in use" where? i cant find them!
thanks
xXx
Kudos! Thanks!
Edit Post Subscribe to This Topic's RSS Feed Highlight This Post Print This Post E-Mail this Post to a Friend Report Abuse to a Moderator
OptionsI have had a similar problem on my 5700, started out the same, people saying my text was coming trhough 3 or 4 times, then it stopped sending. I checked the message centre phone number with my provider, which was correct, and then it would not let me into the the message centre to even edit the number?? I have tried a factory reset and a firmware update. Does anyone else have any ideas??
-
Dear experts.
In we02 I found that 1 daybook had 5 idocs. after checked in st22, I found the abap runtime error message that "short dump has not been completely stored.Its too big". It seems the sap system could not read the total amount field in the transaction. My question is : how to correct this double posting transactions? It only from journal manually or there aare ny other alternative solution?
Thanks in advance for your advice.Dear experts.
In we02 I found that 1 daybook had 5 idocs. after checked in st22, I found the abap runtime error message that "short dump has not been completely stored.Its too big". It seems the sap system could not read the total amount field in the transaction. My question is : how to correct this double posting transactions? It only from journal manually or there aare ny other alternative solution?
Thanks in advance for your advice. -
RFC Receiver adapter issue. Pls advice
Hi All,
When XI is sending data back to R/3 system though RFC Receiver Adapter I am getting the below error. Any suggestions
Error Category XI_J2EE_ADAPTER_RFC
Error Code RECEIVER_GENERAL_ERROR
Pls advice.Rick, your question is very unspecific, so anyone trying to help can only guess very roughly.
So I only have a very rough hint for you, which is the FAQ for RFC adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373330383730%7d -
RFC Send (Sync) --- XI -- RFC Rec (Sync) scenario. Pls help
Hello All,
There is one scenario
RFC Send (Sync) --- XI -- RFC Rec (Sync)
Now I want to make it to async as I do not need response
RFC Send (Async) --- XI -- RFC Rec (Async)
1. I know about Abap Client and Server Proxy that can be
async but the RFC's are very complex in nature. I am not
and abaper also
Can there be a way that Sender and Receiver RFC can be
made Async. Or any other simple way.
RegardsHi Swarup,
I have done the same thing.
I have removed the export parameters of both the RFCs
In interface mapping I used the request message mapping. and kept the response mapping part blank.
Now when I run this scenario it works fine but also
in sxmb_moni I see two messages.
One for my request mapping. -- ok .
Second empty message for response mapping.
I do not want this second message in my sxmb_moni.
Pls advice
Regards -
how to retrieve all datas that lost when i update my iphone4 to that 6.10 ios. i tried to look at may i tunes in my computer but it seems that i forgot to perform back ups since i purchased this phone 2yirs ago.. pls send me an advice..thank u.
All of the data should be on your computer, simply sync it back.
If the update was done via iTunes on the computer, the first step in the process is a backup of the device. -
Same Sender and Receiver File Name. Pls advice urgent
Hi All,
My sender file name is auto generated number so
it is dynamic in nature.
ex. "abc1.txt"
"abc2.txt"
Now In my Sender File Adapter I cannot give
File Name hard coded as my sender file name is auto generated number.
Also I want same file name received at receving end.
File Sender -- "abc1.txt"
File Receiver -- "abc1.txt"
File Sender -- "abc2.txt"
File Receiver -- "abc2.txt"
Pls advice.
RegardsHi Rider,
All your sender files have .txt extension but the name is not constant(dynamic in nature).Than in this case to pick ur file u can use the *.txt as ur sender file name.Than all the files with .txt extension in the source folder specified would be picked.
Than u can proceed in the same way given in this blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Please let me know if u need any information
Thanks,
Bhargav
Note:Award points if found useful -
Rfc Destination problem in RFC Sender Adapter
Hi experts
I created a Rfc destination type TCP/IP for Rfc Sender adapter.
while creating i passed following parameter:
1) I selected Activation Type option-> Registered Server
2)Given a Program id , same as i given in Rfc sender Adapter config.
3)Gateway option:
i) Gateway Host:Server IP address where i created Rfc.
ii) Gateway Service:sapgw00
After making these entry, i m unable to receive message at XI end (I am executing Rfc at R/3 site due to Rfc sender)Hi
please check for the following things.
1. check the RFC destination using the connection test tab in the R/3 system.
2. check whether the program id that u have given is registered or not.
to check the program id go to the transaction SMGW, in the menu select Goto-->LoggedonClients
check for ur program id name in the table.
3. when you configure the RFC sender adapter in XI then you have to give the same program id name that you will give while creating the RFC destination in the R/3 system.
if u still face the problem please reply me back.
Thanks
Rinku -
WebService Receiver Problem. Pls advice urgent.
Hi All,
I have R/3 (RFC) -- XI -- R/3(WebService) Scenario.
Now when I test my WebService in R/3 using wsadmin command it works fine.
But If I import my webservice as wsdl file and use it in Soap Receicer Adapter and use XI I get error:
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: sapd03ci.alkhaliji.bank</SAP:AdditionalText>
Pls advice very urgent
regardsHi RAC,
May I know where this R/3 webservice located.
In your landscape or not?
Thanks
Gujjeti -
Hello,
I have a new Problem about a sending RFC in XI.
Once I send a test-RFC from R/3 se37 it reaches the rfc sender channel but there I get an error in cc-monitoring(the same is displayed in R/3 then as well).
The error says:
Processing error caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel 'CC_RFC_sender_RFC2JDBC' (104238c5fe4c345e8e85752a84330c5c, party '', schema 'TechnicalSystem', identifier 'E10#400')
Can you help me?
I don't understand the error.
CPA-Cache Refreshs do not work.Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".
* Give correct appserver and gateway service details in XI.
* Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek -
Problem in receiving messages via RFC Sender Adapter
Hi,
I have problems in receiving messages from SAP backens systems. Sometimes we are getting all messages sometimes not. Strange.
We are transfering report-results via asynchronous RFC calls. To avoid big message sizes we split them up in max. 1000 rows blocks.
Each RFC call on backend side is completed with COMMIT WORK!
We increased the number of connections in the RFC sender adapter. Then it was better, but the problem still exists! Not so often, but sometimes !?!?!
I hope everybody can help me. Thanks a lot!
best regards,
Hanneshi,
when you don't receive messages what do you see in SM58
on the r3?
any errors over there?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
I have music on my PC that I would like to transfer to my Mac. I am getting rid of my PC and don't want to lose all the music on it. I was wondering if there is a way to sync the music on old computer to my new computer. I tried to sync my Ipod and I
-
AP Payments Manager to perform payment for AR Refund / Return
Hi, I have performed a return in AR and now would like to make the payment in AP Payments Manager. However, I found out the the AP invoice will not appear in Payments Manager straight away after the return is done. It will only appear on the next day
-
I have created a dvd (to be played on a TV) as I was viewing it a few of the clips had motion blur. What cause this? How do I fix this problem? Does it stem all the way back to how I imported it into Final cut express or exported it?
-
How can a class listen to other class's aoutput
I have 2 classes which are both unrelated. but i want one class to listen to the output emitted by the other class. eg, class A continuosly prints messages and these messages, i want to be there in class B ... Any suggestions?
-
Hi All, I am running a fresh install of SCDPM 2012 R2 with a protection group that is backing up the 'C:\', Bare Metal and System State of some VMs. If i add any additional servers to the group since the first creation it returns the following error: