RFC to read the attachment from PR05 and pass the doc to the PHP front end

Hi Team,
Our requirement : We are designing a new front end using PHP portal and pull the data from SAP-backend for travel expense/request.
We are able to upload the document to PR05 using frontend portal.
If employee/manger wants to read the attachment in the portal,how to get the documents attached in PR05 to the front end..
I would like to know the RFC which help me in reading the attachemnts.Regards,
Madhu

I dont want use all the values in my second program I need to pass empno and job only.Since your cursor gets all the columns (using the * is not a good way to code the cursor), that is what your other program will get when it calls pr_test procedure. You will have to FETCH all the columns in that other procedure and discard the ones you do not need.
Alternatively, change the code of cursor to select only the columns you would actually need.

Similar Messages

What about if u dont remember the same apple id and pass which u bought the OS X LION how can i reinstall os x lion

what about if u dont remember the same apple id and pass which u bought the OS X LION how can i reinstall os x lion

Buy it again in your new Apple ID or remember the old one. That's about it.

My challenge: recovering original iWeb files from 2010-2011 timeframe, which included a blog consisting of original postings from me and comments posted to the web from family and friends. I have the web archive files - but did not move iWeb files then.

Background: I started this blog while living overseas and going to sea with the Navy. Missed the opportunity to move the iWeb files with content attached from the mobile.me server to another server. Now, I have the original web archive files - good - but not the comments added to them by family and friends - bad.
My ultimate objective is to create a hard-cover bound book of these files with the comments on the blog ... they document a rather significant experience in my family's life ... to do this, I need to recover the original files with postings.
Any thoughts or insight would be sincerely appreciated!
Thanks, cfwnavy

You have replied to a post that is a month old now and the OP has never replied, so you are probably wasting your time here.
If you read the OP's post and my reply, you will see that he will not be able to recover his blog and neither will you.
If your Mac was stolen and you did not back up your iWeb domain.sites files, then you CANNOT get your blog back.
If you published your site to a host/server, then you can download it back onto your Mac and you will have to re-build your blog/website from scratch and re-publish, but all your replies and responses to posts will be lost and you can never get these back.
My advice would be to re-create your blog in another format such as WordPress.com which is free and don't use iWeb again.
There are plenty of alternatives out there.

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

Download the Update from WSUS and install it while rebooting the Windows 7

HI All,
Do we have any command to install the
already Downloaded Update from WSUS while rebooting the Windows 7 client machine
As per the group policy it will download and notify the user to install, but we need the command or script to install it while rebooting
Any comments or Idea...?
Thanks
Balaji

Hi,
Please take a check into the following thread and see if the marked answer(the powershell commands) would help:
How to install approved WSUS updates via
PowerShell or other method.
Best regards
Michael Shao
TechNet Community Support

File Adapter - Reading 2 files from sender and one file to receiver

All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
Thanks

Hi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu

Iam not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

I recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive

i recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive.. is this possible and for how much? its only a week old.

Your 14 days are up, however you could take your case to Apple Inc. regarding same,
however those are the stipulations.
RAM cannot be upgraded however, period, its permanent on the logic board after mfg.
As for the SSD (solid state drive), upgrading same is a bad premise 9 times out of 10.
No notebooks is a mass storage device, and you need an external HD for data redundancy and backups regardless.
data that is static on your SSD and not used very often has no logical reason to be ON the notebooks, and best saved on a superslim external HD ($60)
SSD are very expensive, even a small one, HD are cheap as dirt and users are recommended to have one regardless for many good reasons.

Copy select value in the textfield from LOV and allow user to edit it

Hi,
I have a datablock with 20 records and each record has comments (say field_comments) fields. I would like to allow user to choose predefined comments populated from LOV (say lov_comments) and to append some extra comments after they choose the value from LOV.
I have created a LOV and added Return type “field_comments” in the column mapping properties. When user clicks on a button, LOV opens up. They select the value from the LOV and the value goes to “field_comment” field. The problem with this approach, user can’t add their comment after selecting from LOV.
I tried this way too. I created another non-visible textbox (say dummy). In the LOV, I added “dummy” field as returntype. In the dummy field, I have created “POST-CHANGE” trigger which basically says :block. field_comments = :block. Dummy.
But, the user has to click on other field to view the selected value from the LOV. The values in the “field_comments” is not updated as soon as user click on “OK” button in the LOV.
I would appreciate it if somebody could give me some input and help to solve my issue. Thank you for your help.
Thank.

Well, I tried exactly what you posted and it allowed me to SELECT from LOV and then CHANGE/APPEND new text in front of returned value in the field. It saved to the database and queried without any problems.
Is your item allowed to INSERT/UPDATE ? If not, then set "Update/Insert Allowed" properties to Yes and attach your LOV to the item and set "Validate from list" to No.
You may also see if you have any validation being performed on WHEN-VALIDATE-ITEM or POST-CHANGE trigger which will fail since you are editing the values populated from LOV.
Hope it helps!

How do I pick up the attachment from the client's machine, in a web-based

Hi Friends,
I just wanted some help from u all.
How do I pick up the attachment from the client's machine, in a web-based email system?
I have done a prog. where a file attachment can be done sitting on the server machine...but not on the client.
Thank u .
do mail me to [email protected]

use the input type file tag in html page and get connected to some of your servlet and then open the streams to read the file byte by byte.

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

OS 10.8.2 on an imac. Whenever I wake from sleep, the wifi has disconnected and I have to use the Netowrk Diagnostics in the Network settings to log back in to my router. Every time. is there any kind of fix for this?

I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?

I am running OS 10.8.2 and everytime I wake my computer from sleep, the wifi is disconnected and I have to use the Network Diagnostics assistant to reconnect to my router. Is there any way to get it to not disconnect everytime? I have resorted to just leaving Network Diagnostics open and just rejoining the network every single time I wake the computer. Any help here?

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

Change here:
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
You must have a verified billing address & be located in the country whose store you are trying to use.

Hello , can you with a single account creative cloud , install on two computers ? (The one from home and one at work)

Hello , can you with a single account creative cloud , install on two computers ? (The one from home and one at work)
This will avoid me lugging around my mac, sorry for my english.
Margaux, photographer

Yes, this has been allowed with Adobe applications going back many years. A program such as Photoshop can legally be installed and activated on two computers at a time for the use of the single licensed user. You can't install legally on your own and a friend's computer for use by the two different people. Prior to Creative Cloud, there was an unwritten limit on how many times a given application could be activated, but there is no longer such a limit under CC. That means you could theoretically install on three or four computers, activating only two at a time, and then deactivating one or both before activating on another computer.

RFC to read the attachment from PR05 and pass the doc to the PHP front end

Similar Messages

Maybe you are looking for