Iam not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate
am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate
i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud
Similar Messages
-
Any suggestions getting my modem (Speedstream 5200) talking to my new airport extreme? Airport Extreme says I do not have the correct user password for the modem but my IP provider says that I do and that they (Bell Sympatico) do not - in any case - support Airport Extreme and that I should talk to Apple Support...who do not come to the phone. So my computers see my new network and my Airport Extreme sees my computers but it cannot access the modem and therefore the internet. Any ideas?
The user manual for the Speedstream 5200 indicatest that it is a router....see link below.
http://www2.windstream.net/downloads/links/SpeedStream211.pdf
If the Speedstream is acting as a router, then the AirPort Extreme must be configured in Bridge Mode to avoid having two routers in series on your network....which would certainly cause IP address conflicts and connection issues.
To configure the AirPort Extreme in Bridge Mode.....
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Connection Sharing = Off (Bridge Mode)
Update -
When I try to access Mail I get the following message "Cannot Get Mail. The mail server is not responding. Verify that you have entered the correct account info in Mail Settings". I have entered the correct account details and even deleted them and re-entered them but to no avail, Help.
Try deleting the email account and readding it in the "other" tab instead of Yahoo/gmail, etc
-
My IPhone 4 was working fine, and now it's not
My IPhone 4 was working fine, an hour later I looked at it again and it was turned off and it wouldn't start again. I tried plugging it into different wall outlets and I have it plugged in to the computer I synced it to, it still won't turn on. does any one have any suggestions?
If justinav's reply does not work:
Plug your iPhone into the wall charger (not a computer), and hold down the sleep/wake button ('power button' on top) and the home button for 20-30 seconds. I find this helped when it happened to my phone once. Plugging it into the wall charger appeared to give it the juice I needed to get up and running again... -
On my iphone 4 i tried to enter my $25 itunes card and it says its not valid when i bought it yesterday... whats the problem?
http://support.apple.com/kb/ts1292Try this link...
Message was edited by: all the answers -
I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it? What's up with that???
I have the exact same issue. I also tried resetting my password. I can log in to iTunes on my laptop with the new password, on to my iPhone iTunes, but my Apple TV says it cannot recognize my password. I just did an Apple Tv software update a few days ago.
I am able to log in to Netflix on my Apple TV just fine. I did not have to re-enter my password for that.
Very frustrating. I hope Apple can figure this out soon and post a fix.
Thanks for any advice. Cheers. -
IPhone 4S was working fine until recenty after updating the software to the 5.1 version
My iPhone 4s was working fine until I recently updated the software to version 5.1, now it locks up on nearly any screen and reverts back to the main screen. Even in settings, if I go in a few tabs in settings all of a sudden it takes me back to the main screen. I have done a total reset on the phone and it has not helped.
Also, it is now completely frying the battery goes from 100% to 35% in about 4 hours. I have killed all apps running and it is still hot and using up the battery.I have done all of the above suggested restart, reset and restores using iTunes and without. No luck.
What I have found is that under Settings; General; About; Diagnostics & Usage; there is an error message populating every single minute that says low memory. It appears that the reset back to the main screen coincides with this error message. I have very little data stored on the phone, 13 Gig available.
How does one go about emptying this memory? -
i can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this
You can try to figure out which Apple ID/email address and/or password you used to activate it by going to http://iforgot.apple.com
If you can't, you'll need to contact Apple Account Security with your proof of purchase. -
Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .
I use dashcode for most of my coding needs, so it is very important to me!I have the same problem too. dashcode shows up in the finder but its just a question mark (see screenshot). Anyone found a way to address this?
Thanks! -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
My iPhoto videos are not showing up in iMovie? I have quit, shut down my Mac and they still are not showing up? What can I do to resolve this?
It is also posible to go back to the imovie you had before, it is still on your computer - you go to Finder and it is in a folder in your programs. Many others have gone back to the old program, and perhaps I am also going to do that too.
In the new imovie it does not come up the question "do you want to download these videos ...."
You shall in imovie open your iphotolibrary in top on the left side,( it is standing under libraries) and you can see all the events you have in iphoto, then you can open the event, you shall use and drag the movies and pictures from the events in iphoto to an events in imovie. If you can,t see your libraries, you can click on a show button on top of the left side.
On the picture you see here iphoto is market on the top of the left side and the pictures to the left is my iphoto-events - and there I can open the one I shall use, and find my movies.
I -
HT5037 I installed the iphoto library upgrader and iphoto still will not open
I installed the iphoto library upgrader and iphoto still will not open. can anyone solve this?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain
FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again. -
iPad 2 froze while updating iOS 7.0.4. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.
Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
http://osxdaily.com/2010/12/04/ipad-dfu-mode/ -
My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?
First, confirm that the iPad is charged and then try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.
Maybe you are looking for
-
How to open a closed posting period?
frnds Transaction MIRO i am trying to post invoice in one of the closed period, so it not allowing me to post and gives a message that postingperiod is not opened, can you please tell me how can i open closed posting period? Thanks
-
Looking for an iPhone App developer
Hi, I'm looking for an iPhone app developer, preferably in the UK, to work with me on a couple of reference apps. Drop me a line if you'd like more information; [email protected] Cheers Phil
-
IIOP fail on java client over jdk 1.4.0.1
Hi colleagues! I have adaptation of standalone java CORBA server onto WebLogic 6.1. So I make startup class (inherited from T3StartupDef) that starts thread in which my server runs the ORB. I use orb from JDK1.4.0.1. Client successfully locates the s
-
JSF 1.2 and facelets 1.1.11 problems with css
I've started using facelets to get the templating features - which is working great. The problem is that I can't load my css files. The HTML generator converts all of my links into a relative path. For example, in my .xhtml file I have this line h5.
-
My iPhone will not connect to wifi. The button will not switch over. Has this happened to anyone else? Please help!