Rfc to rfc without bpm scenario
Hi,
I am trying to do RFC to RFC scenario without BPM.but in sender communication channel following error is coming.
Sender channel 'CC_RFC2RFC_SENDER' for party '', service 'BS_RFC2RFC11' (internal name 'RfcServer[CC_RFC2RFC_SENDER]')
Server data: {jco.server.gwhost=192.168.2.12, jco.server.progid=program_rfc2rf, jco.server.gwserv=sapgw00, jco.server.unicode=0}
Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=000, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=bcuser, jco.client.sysnr=00, jco.client.ashost=192.168.2.12}
Current pool size: 1, maximum pool size : 1
Can anyone please tell me the cause of this error.??
Thanks
Rabi
Hi Priyanka,
I did as you had told but it is again showing same problem.
Will you please help me to resolve it?
Thanks
Rabi
Similar Messages
-
SOAP-XI-RFC sync without BPM scenario: How to catch timeout exception in PI
Hi all
I made a scenario where a Webservice request was placed via XI to RFC in CRM.
This is all done without BPM.
Now the request came up that I have to handle undhandled exceptions from RFC such as Fatal Error, Dump in CRM etc in PI so that customer can get the idea of what happend in the Backend rather PI failing in the monitoring. I did that in CRM by catching all the exception and sending a common error message to PI.
But another requirement is to handle Message Timeout of the RFC in PI for e.g. If the request goes to the RFC and due to the volume of the data, it gets Timed Out then neither PI nor CRM can handle this and it results in PI failing to catch this excpetion.
I tried Fault message type but that does not help either.
Can I get some expert advice.
Regards
NainaInclude your Send_to_RFC step inside a Block...have a deadline branch for this and an Exception Branch....in deadline branch have control step (thro Exception)....in Exception Branch have a Mapping and a Send Step....this mapping will produce a message (define separate DT for this) having constant values (like timeout occured message)
If you are fine with alert message...then instead of Mapping and Send step in Exception include a Control Step (thro alert)....alert message can be "timeout occured in receiving RFC response"
Regards,
Abhishek. -
How to PI call R/3 RFC without BPM.
Hi Expert.
Why PI direct call RFC probably is not a possibility of doing without BPM.
It makes RFC of separate way, it calling it is made Report program where there is a possibility of doing.
Different adapter where it becomes direct call, RFC piece bay occupational calling there probably is not a possibility of doing.Krishna Moorthy P, Thank you so much your answer.
I add question.
My scenario is very simple.
Case 1. File to RFC to JDBC Scenario. (Sync)
Using BPM. PI call File adatper, and PI call RFC Function, and RFC return data send to PI to JDBC.
Case 2. QRFC to JDBC Scenario.(Async)
Using se37 for back job. So, Back job Function send to PI to JDBC.
In this two case, to what kind of is the efficiency better.
<b>I think that case 2 is performance better case1.</b>
It isn't like that? Krishna Moorthy P
I wating for your answer.
Message was edited by:
JuYeop Kim -
Dear Friends,
My scenario is File to RFC , file is picking from third party and that file parameters are updated in ecc and response is updated in third party system
using XI.
For this one I created data types,message types,message interfaces and message mapping for sender , receiver and response.
In interface mapping I have small doubt i.e how many interface mappings needed for this scenario.
In integration directory how many receiver determination and interface determination needed.
please suggest me.
Regards,
Shalini ShahHi Shalini,
U need to create 2 interfaces at sender side(1 is for file request & 2nd for file response) and one interface at ur receiver side for RFC.
Refer File to RFC blogs with out BPM u may find lot of stuff to ur requirement.
Regards,
Edited by: farook shaik on Sep 20, 2008 7:53 AM
Edited by: farook shaik on Sep 20, 2008 7:55 AM -
Soap- XI- RFC- DB BPM scenario help
Hi,
I want to implement a scenario like this. a third party system use the soap adapter to call the ECC RFC via XI.and i want to write the RFC response into another DB using the jdbc adapter.after that i want to send back the DB update_insert result to soap client (third party system).so the scenario looks like this
soap request->XI->RFC
|
soap response <---DB
i want to use BPM,but have not too much experience.appreciate your help.
Regards
xiaofengHi,
This will be a Synch Asycnh Scenario and you will need a BPM with a SYNCH ASYNCH bridge.
Steps :
1. Receiver Request Message from SOAP -- Open SA Bridge
2. Send Syunchronous -- To call RFC and get Response
3. Send Synchronous -- TO send data to JDBC and get response
4. Send -- TO send data back to SOAP -- Close SA Bridge.
You will have to do the corresponding message mapping , etc.
Take a look at the SAP BASIS Component -- Patterns -- Synch Asycnch pattern and this link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
Regards,
Bhavesh -
File content conversion in File-to-RFC without BPM
Hi,
I am using FCC for file to RFc scenario.
My input record is in the following format:
Header record
data rec1
data rec2
Trailer record..
The parameters are used in File content conversion:
Recordset Name : Header,item
Recordset Structure: Header,1,item,*
key field name : data1
and in additional parameters:
Header.fieldNames HI,GenDate,Ftype,Fname,Fdate
Header.keyFieldValue Fname
Header.fieldFixedLengths 1,8,1,50,8
Header.endSeparator nl
item.endSeparator nl
item.fieldNames DATA1,DATA2,DATA3,DATA4
item.keyFieldValue item
item.fieldFixedLengths 231,240,241,120
item.lastFieldsOptional YES
Can anyone check whether any parameters are left, b'cos the file is not being read with this settings. and in the C.C its just showing file processing successfully but not able to see the actual file.Hi,
I assume you have header, item and trailer structure in source file.
Source Data Type will be as follows.
RecordSet
--> Header
--> KeyField(Value OH)
--> H1
--> H2
--> Item
--> KeyField (Value OL)
--> I1
--> I2
-->Trailer
--> KeyField (Value OT)
--> T1
--> T2
Where Item Strucutre can come multiple times.
Please use following settings.
Recordset name: RecordSet
RecordSet Structure: Header,1,Item,*,Trailer,1
Key Field Name: KeyField
Header.fieldNames: KeyField,H1,H2
Header.fieldFixedLengths: 2,3,4
Header.processFieldNames: fromConfiguration
Header.keyFieldValue: OH
Header.LastFieldsOptional: YES
Item.fieldNames: KeyField,I1,I2
Item.fieldFixedLengths: 2,5,6
Item.processFieldNames: fromConfiguration
Item.keyFieldValue: OL
Item.LastFieldsOptional: YES
Trailer.fieldNames: KeyField,T1,T2
Trailer.fieldFixedLengths: 2,8,9
Trailer.processFieldNames: fromConfiguration
Trailer.keyFieldValue: OT
Trailer.LastFieldsOptional: YES
Regards,
Gouri -
File-RFC-File (without BPM)- Issue
Hi All,
I am working on a File-RFC-File (without BPM) scenario in PI 7.1.
My scenario is having few problems like, its not able to delete the file from the source directory path (for which we have delete permissions) and it is an NFS system and it shows an error in the Sender file CC.
"Error: com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId"
But it gets processed successfully and provides a written paramter which I could see in MONI, but again doesn't write the file in the target directory. Could you please provide your inputs and let me know if I need to do any additional settings w.r.to PI7.1.
These are the parameters which I have specified in the Sender File adapter
Processing sequence
AF_Modules/RequestResponseBean Local Enterprise Bean 1
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOnewayBean Local Enterprise Bean 3
Module configuration:
1 PassThrough true
3 receiverChannel <FilereceiverCCname>
3 receiverService <Receiver Bus System>
Regards,
NithiyanandamHello,
Check out in module configuration tab for any "type error" or spell mistakes.
Check out this thread which might be useful for you :[ File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.]
regards
Ramesh -
Async-Sync-Async Bridge Without BPM
HI Folks,
I have a requirement as
u201CAn Asynchronous SOAP request is triggered to PI and then should get records from a (JDBC)database and write the result to a fileu201D
It is of Aync-Sync-Async Bridge and i have to do without BPM
I know by using some module parameters at sender communication channel we can do this.
But my query
1)Is that for SOAP sender communication channel can we provide the same module parameters
Number - ModuleName - Type - ModuleKey
1- AF_Modules/RequestResponseBean - Local Enterprise Bean - 1
2- CallSapAdapter-Local Enterprise Bean - 2
3-AF_Modules/ResponseOnewayBean-3
Parameters
ModuleKey - ParameterName - ParameterValue
1 - passThrough - true
3-receiverChannel - Receiver File Adapter Name
3-receiverService - Receiver Business Service/ System
2) Does the SOAP support the without BPM scenarios
3)Scenario is like Soap --> JDBC -->File (Async - Sync - Async) and how abt for Soap --> RFC -->File (Async - Sync - Async)
Thanks in Advance
LemonFor your requirement , you can handle this scenario without BPM in two ways.
1) Async sync bridge without BPM. You are going to use request response bean and one way response bean module to achieve this. very simple. See this [link|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without%20BPM)]
In the sender SOAP channel you have to configure first request response bean, second callsapadapter and third onewayresponse bean. Refer this link. Simply follow file sender configuration for your soap sender or RFC sender.
Note: one receiver agreement , one receiver determination, one interface determination. only two receiver channels one jdbc and one file.
2) You can create SOAP to File asynchronous. Using quality of service EO and creating service interface asynchronous mode. In the mapping area do JDBC lookup. If your version is 7.1 then this lookup is available. This is pretty simple no need to do async to sync pattern.
Hope that helps. -
Sync-Async without BPM- error(XIServer:TOO_MANY_RECEIVERS_CASE_BE)
Hi all
This is without BPM scenario.
I am doing a SOAP - XI - RFC - XI - SOAP scenario(this is a sync call)......also at the same time i am writing a file onto a directory in async mode.
What exactly i want is ...when i receive file from SOAP...i want to call RFC using an interface mapping in a sync mode....also the SOAP request i have received...i want to write it as a backup file onto a directory....using FILE receiver adapter in Async mode.
So basically wheen i configure it in a receiver determination.... i have two receiver 1. RFC 2. FILE and two interface determination and recevier agreement respectively ....but i am facing a problem where when i run this scenario...it gives me following error:
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:TOO_MANY_RECEIVERS_CASE_BE:
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:917)
at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please help !have two receivers.
one for the RFC and other one for the File.
The have their respective interface determinations.
Plus you need to have a BPM in this case -
SOAP to RFC synchronous scenario with File without BPM
Hi Folks,
I have a requirement that has to be done with out BPM!!!
Requirement:
Soap will trigger the request to SAP(RFC) and SAP sends the response to a file and then after SOAP has to recieve the ACK from PI.
1) Can we do this by without using BPM
2)Can we use without BPM module entries for SOAP Sender
Please suggest and help me out in this
Thanks in advance,
Regards
vivekHi Vivek,
Why not have the SOAP interface defined as synchronous?
You can avoid using BPM that way.
Best Regards,
Ravi -
File is not getting deleted in File-RFC-File without BPM
Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AMHi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini -
hey guys
is a File-To-RFC scenario possible without using BPM? i have gone through the blog by Arpit Seth ( /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit ) but it uses BPM.
i am new to XI and not very comfortable with BPM.
please let me know if BPM is the only way out or are there some other methods too.
Also under what circumstances one should use BPM?
thanx in advance.
aamir suhailHi,
it's a standard non BPM scenario
(you can find many weblogs like this)
the only different thing is the RFC signature import
(inside repository)
and the use of different channels (file and RFC)
you can find many examples in my XI FAQ
(document section)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Java.lang.NullPointer Exception in File-RFC-File wtihout BPM scenario
Hi All,
I have implemented scenario File - RFC - File without BPM in PI7.1 according to below link by bhavesh
[File - RFC - File without a BPM - Possible from SP 19.;
but I am getting error java.lang.NullPointer Exception in Audit log of sender communication channel when it enters in ResponseOnewayBean.
I had implemented the same in PI 7.0 but there it was working fine.
Is there any limitations on the use of the above beans in PI7.1 as I could see two more threads on the same unanswered yet.
Please help me in resolving as it is priority task for me
Thanks,
AmitSometime back I saved this SAP Note 1261159 for this error. Not sure if it is still valid. Try to get it implemented.
Regards,
Prateek -
Send multiple records to rfc without using BPM
Dear Experts,
Could you please help on the following scenario.
I need to send multiple customer master data records from a file to rfc without using BPM.
The following is the mapping i am using
source Target( RFC)
====== =============
Tree occurance type Tree occurance
cust_mt 1..1
customer 0..unbound -
> ztest_cust( rfc ) 1..1
cname 1..1 -
> cname 0..1
cno 1..1 -
> cno 0..1
bank -
> bank 0..1
item : 0..unbound
code -
> code 0..1
name -
> name 0..1
location -
> location 0..1
1. Multiple banks possible for one customer
2. Multiple customers possible in datafile from mdm
Problem 1:Only one customer record from file is being sent to RFC thouth many records are in the file, the second, third .. and so on records not being sent to rfc.
Problem 2:
if add o.. unbound for the rfc occurance, <messages>,<message1> tags are getting added in message mapping, and no single customer record sent to rfc..
Your help is rewarded with good points.
Appreciate your help.
Thanks.
sravya.Hi VJ,
Thank you for the immediate reply.
one more thing, when i tried to change the occurences of ztest_cust( rfc) to 0..unbound,
I am not seeing the occurances updated in the imported rfc structure.
The following is the wsdl for rfc, could you please help me to add occurances 0..unbound.
Thanks a lot.
sraya.
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" name="ZTEST_CUST" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<wsdl:documentation>
test for mdm
</wsdl:documentation>
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="ZTEST_CUST">
<xsd:complexType>
<xsd:all>
<xsd:element name="CNAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CNO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:element name="ZTEST_CUST.Response">
<xsd:complexType>
<xsd:all>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ZST_CUST">
<xsd:sequence>
<xsd:element name="CODE" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOCATION" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ZTEST_CUST.Input">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST" />
</wsdl:message>
<wsdl:message name="ZTEST_CUST.Output">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST.Response" />
</wsdl:message>
<wsdl:portType name="ZTEST_CUST.PortType">
<wsdl:operation name="ZTEST_CUST">
<wsdl:input message="rfc:ZTEST_CUST.Input" />
<wsdl:output message="rfc:ZTEST_CUST.Output" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ZTEST_CUST.SAPBinding" type="rfc:ZTEST_CUST.PortType">
<rfc:binding style="rfc" />
<rfc:type name="ZST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:category>
structure
</ifr:category>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
<ifr:isFlatStructure>
true
</ifr:isFlatStructure>
</ifr:properties>
<ifr:definition>
<ifr:internalLength1>
180
</ifr:internalLength1>
<ifr:internalLength2>
360
</ifr:internalLength2>
<ifr:fields>
<ifr:field name="CODE" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
0
</ifr:offset1>
<ifr:offset2>
0
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="NAME" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
60
</ifr:offset1>
<ifr:offset2>
120
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="LOCATION" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
120
</ifr:offset1>
<ifr:offset2>
240
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
</ifr:fields>
</ifr:definition>
</ifr:container>
</rfc:type>
<wsdl:operation name="ZTEST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test for mdm
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:package>
$TMP
</ifr:package>
<ifr:akhNode />
<ifr:released>
external
</ifr:released>
<ifr:outbound>
false
</ifr:outbound>
<ifr:synchronous>
true
</ifr:synchronous>
<ifr:asynchronous>
false
</ifr:asynchronous>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
</ifr:properties>
<ifr:definition>
<ifr:parameters>
<ifr:parameter name="CNAME">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="CNO">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="BANK">
<ifr:descriptor>
<ifr:description language="EN">
test bank type
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:complexType xmlns:xlink="http://www.w3.org/1999/xlink" name="ZST_CUST" type="structure" xlink:role="type" xlink:href="/Content?TYPE=type&NAME=ZST_CUST" />
</ifr:definition>
<ifr:properties>
<ifr:direction>
inout
</ifr:direction>
<ifr:class>
tables
</ifr:class>
<ifr:type>
structure
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
</ifr:parameters>
</ifr:definition>
</ifr:container>
</wsdl:operation>
</wsdl:binding>
</wsdl:definitions> -
Issue in File to RFC to File Scenario with BPM using Block Step
Hi Everybody,
I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth KumarHi Rajesh,
After going through the blog, i saw the trace messages. It says
" The exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar
Maybe you are looking for
-
Creating links to specific area in a PDF
I want to create a link to go to a specific text area in my one-page PDF... not allowing anything outside of this specified area to be filled unless you click on this link. Does anyone know how to do this?
-
Hey everyone, A colleague of mine just got moved from a desktop to a laptop, then was given full admin rights. Suddenly, everything in RH (WebHelp builds work ok, nothing is "blank" in the TOC, no error messages) works perfectly. I'm trying to nail d
-
How do I get my Blackberry to Sync with Outlook and other apps on Mavericks?
With the removal of iSync, how do I get my Blackberry to sync with Microsoft Outlook 2011, and the other applications on Mac?
-
Student License for commercial-use, in Italy
Hi there! I would want to buy a student license for Flash Professional CS5, but I have some doubts about it. Can I use this kind of license for commercial use, like creating websites for works, or selling my games on Steam? I've read a older topic, a
-
How do I free up my Physical Memory?
I increased my physical memory up the max of 8 Gigs. My hard rive is 750 G's and is only using 79G's of that,so I'm wondering why so much of my physical memory is being used up? The symptom I'm seeing is that I get the wheel/hour glass my computer i