RFC To SOAP Synchronus Scenario

Hi,
I am doing the scenario like RFC To SOAP sync.When i am running the RFC in R/3 it's going to dump. In the dump it's giving the message
"senderAgreement not found: lookup of binding via CPA-cache failed for" .
Thanks & Regards,
Mouli.

HI Chandra,
Check these links
XI3.0 Sender RFC Adapter fails
Re: RFC as Sender Problem
Re: RFC Call from R/3 to XI
Re: RFC adapter as sender
RFC Sender adapter - Sender agreement not found Error
Hope they help to fix your issue
Regards
Vishnu

Similar Messages

Error in SAOP adapter : RFC to SOAP Synch Scenario

Hi Experts,
Scenario is "RFC to SOAP Synch".
For creating this following this link : **************** - Scenario on RFC to SOAP
Trying to send XML to SOAP receiver.
Using Below details for SOAP:
Website : http://www.webservicex.net/WS/WSDetails.aspx?WSID=59&CATID=4
Target URL : http://www.webservicex.net/SendSMS.asmx?WSDL
SOAP Action: http://www.webserviceX.NET/SendSMSToIndia
But when I try to send showing this error:
"Error in processing caused by: com.sap.aii.af.lib.mp.module.ModuleException: call to messaging system failed: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket".
Any one please suggest how resolve this issue?
Is there any setup necessary in PI server to send message through SOAP?
Thanks,
Arthita

Is there any setup necessary in PI server to send message through SOAP?
No
Solution
Check if there are any firewall rules in place which are restricitng the PI system to connect with the URL
: http://www.webservicex.net/SendSMS.asmx?WSDL
Suggestion
Copy paste this URL in browser and verify if it is accessible
Sourabh

RFC to SOAP sync error

Hi All,
I am doing the RFC to SOAP sync scenario. request R3 data is coming to XI and its triggering to SOAP receiver.
Information SOAP: continuing to response message e9598290-a14f-11df-969a-00145e474044
Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request and soap response to file response.
the same way i have done the RFC request to soap request and soap response to rfc response.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP.
I have tested the test mapping and its working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://www.webMethods.com/2001/10/soap/encoding">exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
the r3 request stacture is:
<filed1>
<filed2>
<filed3>
<ITEM>
<ITEM1>
<ITEM22>
</ITEM>
the soap request stacture is:
<filed1>
<filed2>
   <Header>
    <filed1>
    <filed2>
    <filed3>
   </header>
   <Item>
    <item1
    <item2>
    <item3>
   </Item>
</field2>
</field1>
is there any issue with mapping?
RFC sender CC error is Error in processing caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: got unexpected document type:DOC_TYPE_UNKNOWN
Can you pls let me know the some inputs to reslove this issue
Thanks,
Venkat

have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request
and soap response to file response. the same way i have done the RFC request to soap request and soap response to rfc
response.
FILE to SOAP Sync scenario....did you use RequestResponseBean and are you using the same to process RFC to SOAP Sync scenario? If yes, then you dont need the RequestResponseBean for RFC <--> SOAP.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP. I have tested the test mapping
and its working fine. - - Application APPLICATION_ERROR application fault exception M the r3 request stacture is: the soap
request stacture is: is there any issue with mapping?
I hope you have included a mapping program for Request Mapping and also for Response Mapping in the Interface/ Operation Mapping and included the same in Interface Determination!
Regards,
Abhishek.

RFC to SOAP Synchronous

Hi all,
Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC. Please explain in detail.
would appreciate your helpful information
Thanks

Please explain RFC to SOAP in Synchronous. but sending is one RFC and Receiving is another RFC.
So you mean to say the RFC that you include in the Request of message interface is RFC1 and that in the Response of the same MI is RFC2?
If the sending Business System (SAP) is the same then this should be like any other RFC to SOAP sync scenario.
You may need to mappings RFC1_to_SOAPReq and SOAPResp_to_RFC2
Develop the MI accordingly with the corresponding Messages included and then include the appropriate mappings in Interface Mapping.
Regards,
Abhishek.

Connection closed by remote host on SOAP Receiver Scenario

Hi Experts,
I implemented a RFC to SOAP Receiver scenario, consuming an external
Web Service with SSL security, using SAP PI 7.1. I configured the SOAP
Receiver Adapter with Proxy e Proxy User, and it shows the
message u201CConnection closed by remote hostu201D. I have checked with
Network team, about the firewall restrictions, and they told me it was
pass by firewall. I installed the SOAP UI on the PI DEV Server to test
the SOAP Requets and it worked. Only on the PI it shows this error
message. I traced log at SLL service in the Sap Netweaver Administrator
and I didnu2019t get success.
Long text error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
java.io.EOFException: Connection closed by remote
Please, could you help me about this error?
Fábio Ferri

Hi Fabio,
You need to set higher trace level in order to get more information in your trace file.
If you think it is related to security then set logging level of components com.sap.aii.security.lib and com.sap.aii.af.security to DEBUG in Visual Admin's log configurator. Also set com.sap.aii.af.mp.soap and com.sap.aii.messaging to DEBUG level.
And then try sending messages and see whether you have received more informaiton in trace file, but don't forget to revert back the change once you finish testing otherwise it will filled up your diskspace.
Best regards,
Pinkle

RFC to SOAP Scenario error

Hello ALL
I am trying to working in RFC to SOAP scenario in sap pi 7.31 single stack system.with help of blog **************** - Scenario on RFC to SOAP
i am trying to pass input values from ECC through RFC to web service .
while sending data using function module from ECC system i got following error
thnx in advance

Hi Ganesh,
are you getting any error is SM58? Please check the below blog for configuration
Michal's PI tips: How do you activate ABAP Proxies with AEX - simplified version
IDOC_AAE To File with all Configurations
the below discussion will be useful
RFC to FILE(7.3) single stack

Rfc to soap scenarios

hi expects ,
can any body send me the rfc to soap scenarios examples.please help me.

Hi Santosh,
Check the following link.. hope it will help u..
Configuring the Synchronous scenario in XI
Regards,
Rohit.
Reward points if helpful.

RFC TO SOAP SCENARIO

Dear Experts,
I am facing the Following error for RFC to SOAP Scenario, i Tried
1. Full Cache Refresh
2.Delete and create Sender Agreement Again
3.Specifying the Program id Again
yet the Scenario is not Working, could you please help me in Resolving this at the Earliest
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'ISU64', toParty '', toService '', interface 'YGVK_SEND_WS_TO_WS', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_YGVK_SENDER_WS_TO_WS' (channelId f1219fd41be734a2a72cd3ddcb779475)
Regards,
Vijay Karthik G

Hi,
copy the sender agreement to the same one but in party field
remove the " * " (it has to be empty)
test it and let me know
Regards,
Michal Krawczyk

RFC to SOAP Scenario -- Delivery Exception

Hi All,
I am working on RFC to SOAP scenario.
On executing a program in the SAP system, the system is throwing a dump stating "com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML".
I feel that the error is because of the response not being sent back by the webservice. On executing the webservice independently, it is working fine i.e. sending back the response.
Can anyone suggest the possible reasons for this error and what needs to be done to rectify this?
Thanks,
Ravi Kiran

the return from the Web service must have been an HTML(may be an error page or something)...What kind of authorization does this WS look for ?
Pls check these threads...
SOAP Receiver Adapter Proxy Settings
Receiver SOAP Adapter Error: invalid content type for SOAP: TEXT/HTML

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

Jco.webas.ignore_jdsr_error=1 in the sender side RFC adapter of RFC to SOAP scenario

Hello Team,
I am doing RFC to SOAP scenario after configuring the scenario i have checked the sender side communication channel it is not throughing any errors and it shows the status as green but it is displaying a short message
it is the short log displayed while checking the sender side RFC communication channel it shows that "jco.webas.ignore_jdsr_error=1" can please any one suggest me how we can solve the issue.
Regards,
Avinash.

Hi Avinash - I don't think that is an error instead it just displays your system configuration.
your RFC adapter should work i believe..
Are you facing any issues?
(I think the parameter is nothing but the value @ nwa/java system properties/XPI Adapter:RFC -> ignoreJrfcJdsrError(true/false))

RFC-to-SOAP-Scenario: XIServer:NO_MAPPINGPROGRAM_FOUND

Hey guys,
We've implemented in SAP PI 7.11 a RFC-to-SOAP-Scenario. The whole scenario is sync. WSDL and RFC are imported objects.
Now we're going on to test in backend and call the related remote function module via se37.
The error message is (from xsmb_moni)::
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID A2DC458230C93030AE8B43396EEC43DB Software Component 83222F30FC9011DF8643DD3AC3E93CB3</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID A2DC458230C93030AE8B43396EEC43DB Software Component 83222F30FC9011DF8643DD3AC3E93CB3</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What we've already done:
-> Cache refresh
-> server restart
-> soap fault mapping
-> dummy changes
-> mapping is available in sxi_cache
-> function module is not dumping in backend
Any ideas how we can go futher with this?
Thank you very much and greetings,
Stefan

FYI...
Apparently, this error message can sometimes be misleading.
I found in another thread that this message came after a short dump in the ABAP function. After viewing ST22 in our backend system I noticed short dumps corresponding to the times when I make the SOAP call.
[NO_MAPPINGPROGRAM_FOUND SOAP RFC Adapter]
We can call SE37 with the same parameters and there is no ABAP error. So the search for root cause continues, but maybe this info will help someone.
-Aaron

ABAP Mapping in RFC to SOAP Scenario

Hi Folks,
I have a scenario to send data from RFC to SOAP. I want to use the ABAP MApping for this case. Can anybody guide me how to do the ABAP Mapping for this case ? It will be real help if somebody can give a step by step guide ?
Regards,
Santosh

Hello Again,
HOW TO DO ABAP MAPPING:
Use this link and go to sec 3.1 Do exactly as mentioned in this link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
OR
1. Open http://<host>:<port>/exchangeProfile/index.html
2. Choose IntegrationBuilder -> IntegrationBuilder.Repository ->
com.sap.aii.repository.mapping.additionaltypes
3. Maintain the following entry:
R3_ABAP|Abapclass;R3_XSLT|XSL (ABAP Engine)
4. Open http://<host>:<port>/rep/support/admin/index.html
5. Choose Administration of Properties -> All Properties
6. If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not correct, choose REFRESH at the top of the page.
How to call XI ABAP Mapping via RFC:
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
XI: ABAP mapping blogs
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
/people/rahul.nawale2/blog/2006/11/01/dynamically-sending-a-mail-to-the-po-creator-using-xslt-abap-mapping
PART 1
/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
PART 2
/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
PART 3
Convert an ABAP table into XML file using SAP DOM Approach
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
Testing ABAP Mapping
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Regards,
Madan Agrawal

RFC(WSDL) to SOAP sync scenario

Dear all,
My requirement is there is an RFC from ABAP that has to be exposed as WSDL and send it to some 3rd part sys take response and send it to RFC(abap).
How can this be achieved in 7.1/7.3,is there any difference .
I did not on work much on Soap scenario's.
Pls suggest.
Thanks

Since RFC is exposed as WSDL you can import that WSDL int the ESR to include request and response messages. Also create outbound(RFC) interface with the request and response message types. Similary you need to get WSDL for the receiver system. Import the WSDL IN ESR to create request and response message. Create inbound interface (receiver) using the receiver wsdl req,resp messages. since RFC Is exposed as WSDL, I think you can create soap sender for RFC and soap receiver for the target system synchronous. You can refer SDN for SOAP sender and receiver scenarios.
Refer SDN and also refer this [link|http://www.riyaz.net/sap/xipi-a-guide-to-using-sap-xi-soap-adapter/113/]

RFC to SOAP Scenario - WSDL-Import really needed?

Hey @all,
we like to feed a webservice via SAP Backend. As middleware we use SAP PI 7.1.
The planned scenario is RFC to SOAP. The wsdl of webservice (NON-SAP) has no filled soapAction-Parameter and the operation with name "process" occures three times in it with the same name, but each operation "process" has it's own Request / method (axis), like "Request1", "Request2", "Request3". Each request has it's own response.
In this case it is not possible to import the wsdl as external references correctly - the import gaves an error caused of the identical names of the three operation-parameters.
The question is:
Is it possible to work this out without the import of wsdl and without soapAction-Parameter?
How could we call the correct operation?
Thanks very much in advance,
Stefan

Hi,
Maybe you could try to editing the WSDL and import it three times e.g for process (1) here is the WSDL (1) --> Make sure you delete the other process.
Make message mapping for each process and its corresponding response. So that would be, 6 message mappings (request and response) and 3 operation mappings.
In Integration Directory, call the correct operation in Interface Determination by using xPath.
http://wiki.sdn.sap.com/wiki/display/XI/XpathConditioninReceiverDetermination
although the blog above is for receiver determination, the xPath conditions for interface determination are the same.
For the without SOAP Action parameter, I guess it is okay to leave blank. I have not used the SOAP Axis though (I used the PLAIN_HTTP adapter for that). Just to be sure, test it in SOAP UI.
Hope this helps,
Mark

RFC To SOAP Synchronus Scenario

Similar Messages

Maybe you are looking for