RFC working in foreground but not working thru webdynpro abap

Dear all,
I am passing certain parameters to an RFC it works thru foreground but when I pass the same parameters at the click of a submit button the RFC doesn't work. although the RFC importing parameters are getting passed successfully.
Can anyone tell me the reason for this kind of behaviour or what needs to be done to make it work more specifically?
Thanks and regards,
Sonal

I am not sure about the exact reason behind your problem, but you can try following things. I hope it will help.
1) Set break point after RFC call, and try following things:
     i) Check if correct parameters are passed to the RFC i.e. parameters you are passing in test mode, same are also passed
        while running in WDA application
     ii) Compare the return parameters of RFC in test mode and WDA after setting break point if any
2) use 'COMMIT WORK' after RFC call
Regards,
Saket.

Similar Messages

I was using webrtc connection for a video connect. Firefox works in Mac but not work in windows

I was using our company API tokbox SDK to do the servers test between two machines. I blocked one machine ipfw to test the server connection. However, our server connection works well when we are using two mac firefox browser, but not succeed when we were using one windows and one mac machine.

Oh, I replied in your second question here: https://support.mozilla.org/questions/1001511

My Fullbrowser Portefolio Website work in SWF but not work in HTML

Hi people
First of all I am not very good in English language.
I created my portfolio website in flash as3, with javascript (SWFAddress and SWFObject), with contact form with PHP, and XML Gallery.
When uploading all the files into the correct folders for the server, the first times I view the site in browser it works correctly, the browser reads the HTML without any problems.
However I tested it on firefox, safari, ie, google chrome, and it just did not work in google chrome, so I tried to solve the problem, beginning to see where the error was in the HTML file.
I copied the original file, because that original file I knew it was working properly in other browsers, and started to make changes. I managed to get google chrome to open the HTML correctly but then did not work in firefox and safari.
So I decided to eliminate this html file and continue with the original file. I'll test again and something happen! The file browser can't read XML, everything else works correctly, alltransitions are correct, the animations are correct.
I try with the SWF and it opens the XML Gallery, I try with the HTML and it does not open.
I don't know what to do, can you guys help me?
Thanks!

If the swf file is in a different folder than the html file, then it is might be a problem with targeting the XML file in the swf. When you place an swf file in an html page, anything that swf tries to load has to be targeted as if the swf file is in the same folder as the html. It does not have to live in that same folder, but it has to act as if it does.

Css work in window but not work in mac os on browser safari

css not work properly on safari of mac os but work safari on
window

Check Safari / Preferences - Extensions. Turn that off if you have any installed, quit then relaunch Safari.

Js working with FF but not working with IE

Dear All,
I have created a text field P5_NO1 and in the
Post Element Text
<span style="color:#0000ff;font: normal 1.2em "Lucida Sans Unicode",sans- serif;font-size:12px;"> <select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option> ml</option>
<option> kg </option>
</select> Units
</span>
the js TankUnit() works fine in FF not in IE
I have an sample in apex.oracle.com
http://apex.oracle.com/pls/otn/f?p=4000:4150:4089089633206316::NO:::
can anyone help me to solve the problem?
bye
Srikavi

Hi Peter and John,
FF is so... tolerant to accept the value of the option as the same as it is displayed in the select list.
where IE is so... prudence, that we have to explictly tell it
ie Post Element Text in IE should be like this
<select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option value="ml"> ml</option>
<option value="kg"> kg </option>
</select> Units
bye
Srikavi

Load xml works on designer but not works in adobe acrobat

Hi
I have load a xml file on the file -> properties of the form.
When I preview the pdf all works ok, but when I have saved the document and I have opened the pdf file with adobe acrobat. Then data hasn't loaded.
Somebody know what happen?
Thanks
Ruben

Unfortunately, Adobe no longer supports Acrobat 7. Not only that, but I don't believe it was ever supported in a Citrix environment.
You will need to upgrade to at least Acrobat 8 for general support (and official Citrix compatibility).

Personal hotspot working via BlueTooth but NOT working via wi-fi

Hi,
Would appreciate some help with this! Using an iPhone 4, just upgraded to iOS 4.3, and trying to get personal hotspot working.
Basically, see subject ^ .. I can't get it working. Devices (I've tried iMac, iPad) can see the wireless network created by the iPhone, begins to connect (and appearing connected, from the iPhone) but isn't actually online. Though, I was able to pair my computer and phone and create a network connection via personal hotspot that way. But I want to use wifi, and let others use it...
I'm on Bell Mobility in Canada. Any help greatly appreciated!
Chris

Hi lofive,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue with devices not being able to connect to a Personal Hotspot created by your iPhone. Try the suggestions in the article linked below, it provides a lot of great troubleshooting tips that will resolve most issues like the one you’ve described.
iOS: Troubleshooting Personal Hotspot
I hope this helps.
-Jason

Case Working in "TOAD" but not Working in "WHERE" clause

Hi Friends,
When I am using case in the where clause of SQL query in Oracle Reports 3.0.5, than it is giving me "Error - Rep - 0946 Unable to Parse Query"
But when I am running the same query in TOAD it is working fine.
select *from inv_stores, inv_product, inv_location
where (inv_stores.location_code in ('12', '13', '16', '17', '18') and
            inv_stores.location_code = inv_location.location_code and
            inv_stores.department_code = inv_product.department_code and
            inv_stores.product_code = inv_product.product_code and
            nvl(delete_flag, 'N') <> 'Y' and
            inv_product.department_code = '11' and
                   (((CASE WHEN nvl(inv_product.sale_price3jd,0) = 0 THEN 0 ELSE (nvl(inv_product.sale_price3jd,0) - nvl(inv_product.cost_pricejd,0)) /
                   nvl(inv_product.sale_price3jd,0) END) * 100 ) <= 100))
order by inv_product.department_code, inv_product.product_codePlease Help me.......
Thanks in Advance

Hello,
When you create a SQL query in Reports, Reports will parse the SQL query in order to create the "data model".
Reports 3.0.5 is quite old, so, you can use only the SQL "supported" by the RSF included in Reports 3.0.5.
When you use TOAD , the sql query is not parsed by TOAD but by the DB just like with sqlplus or SQL Developer.
Regards

DragAcceptFiles Working in 9926 But Not Working In 10049 and 10061

My company has a software product that accepts dragged items. In all versions of Windows from XP through Windows 10 build 9926 that functionality has worked fine. However, with build 10049 (possibly 10041 which I did not test thoroughly before
going to 10049) and now 10061 that functionality stopped working. The application calls DragAcceptFiles to enable drag drop messages. In addition, either ChangeWindowMessageFilter is called on Vista or ChangeWindowMessageFilterEx is called on Windows
7 and higher for the messages WM_DROPFILES, WM_COPYDATA, and WM_COPYGLOBALDATA. This was working fine on Windows 10 build 9926. Now when I attempt to drag an item to our software product, I get the "Don't" symbol (circle with line through
it) and no WM_DROPFILES messages are received. The application is unchanged with only an upgrade to the Windows 10 build performed. As a sanity check, I created a brand new VM yesterday running build 9926 and the functionality worked fine. I
then upgraded to 10049 and it stopped working. This morning I upgraded to 10061 and it is still broken. Is there are new filter or restriction in place since build 9926 that would be stopping the traditional drag drop procedure from working? This
is very frustrating because there is a dearth of information on Windows 10 API changes and since this appears to be some kind of recent change, I am out of ideas of where to look for answers. I can duplicate this problem on the older platforms by simply
calling DragAcceptFiles with the second parameter set to false. In that case, on Windows 7 for example, I will get the "Don't" symbol.
When drag drop is working fine, the WM_DROPFILES message is received and processed using DragQueryFile to get the number of files to be transferred and the names of those files. That is then followed by DragFinish to complete the operation.

Hi,
Since this issue is related to the desktop application development, I recommend you post it in the following forum
MSDN---Application compatibility for Windows Desktop Development
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Outlook is working on VLAN but not working on other VALNS

First of all thanks in advance.
here is the scenario :-
(1) 03 VLANS in the network. all VLANS are connected through core L3 switch. No ACLs in L3 switch.
      VLAN 101-192.168.1.0/24
      VLAN 102 - 192.168.2.0/24
     VLAN 103- 192.168.3.0/24
(2) EXCHANGE server 2007 is installed on VLAN 101. (all roles are installed on same server)
(3) no firewall is configured in network
(4) Network is not connected to Internet.
now my problem is that
(1) outlook Clients in VALN 102 and VALN 103 is not connection (showing exchange server not available). whereas OWA is working fine. user able to send and receive the mails.
(2) all outlook clients on VALN 101 is working fine.
Thanks

Hi,
According to your description, I know that Outlook client VLAN 102 and 103 cannot connect to Exchange server 2007 in VLAN 101, however OWA works well.
Do you use Autodiscover to configure the user account on Outlook which located on VLAN 102 and 103?
How about manually configure user account on Outlook? I suggest try to manually configure the user account for testing. If it works, it seems an issue on the Autodiscover side. Please paste the detailed error message without sensitive information for the
further troubleshooting.
Since you are working on VLAN, please make sure you have insalled the Exchange Certificate which trusted by the CA on both VLAN 102 and VLAN 103.
Thanks
Mavis Huang
TechNet Community Support

Isync for RAZR worked on powerbook, but not working on new MacBook Pro

Hello --
I've been syncing my RAZR for the past year using my G4 Powerbook - no problems. I've just bought a MacBook Pro, and am trying to get the RAZR to sync to it. I was able to set up the bluetooth connection no problem, but iSync doesn't seem to see the phone - it doesn't find it when I scan to add a device. Thoughts/advice?
Thanks!

I have a similar situation. My RAZR pairs and works with my G4 Dual, but when I pair it with my 15" Powerbook, there are no isync services ....
I haven't found a solution yet.
PB 15" 1.67 Mac OS X (10.4.7)

AMF work in Localhost, but not work in Remote server

I am using zend's amf to connect the flex with backend.
I have this service-config:
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="zend-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="zend">
                <channels>
                    <channel ref="zend-endpoint"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="zend-endpoint" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://www.domain.com.br/flex" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
When I run my app in localweb this work nice, but when I upload my app to the host, this erro show:
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://www.domain.com.br/flex'"]
    at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()[C:\autobuild\3.x\frameworks\pro jects\rpc\src\mx\rpc\AbstractInvoker.as:290]
    at mx.rpc::Responder/fault()[C:\autobuild\3.x\frameworks\projects\rpc\src\mx\rpc\Responder.a s:58]
    at mx.rpc::AsyncRequest/fault()[C:\autobuild\3.x\frameworks\projects\rpc\src\mx\rpc\AsyncReq uest.as:103]
    at mx.messaging::ChannelSet/faultPendingSends()[C:\autobuild\3.x\frameworks\projects\rpc\src \mx\messaging\ChannelSet.as:1446]
    at mx.messaging::ChannelSet/channelFaultHandler()[C:\autobuild\3.x\frameworks\projects\rpc\s rc\mx\messaging\ChannelSet.as:1056]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.messaging::Channel/connectFailed()[C:\autobuild\3.x\frameworks\projects\rpc\src\mx\mes saging\Channel.as:1069]
    at mx.messaging.channels::PollingChannel/connectFailed()[C:\autobuild\3.x\frameworks\project s\rpc\src\mx\messaging\channels\PollingChannel.as:388]
    at mx.messaging.channels::AMFChannel/statusHandler()[C:\autobuild\3.x\frameworks\projects\rp c\src\mx\messaging\channels\AMFChannel.as:411]
Please, somebody can help-me, please?

RESOLVED!
The problem was on the server: http resquest return 301... I turn off the "mod_security" on the server and all works perfect now!

UCCX Automatic Work State configured but not working?

HI All, I have a customer that is running UCCX 8.0.2SU3 and I have some CSQs configured with Automatic Work configured for 60 seconds. Prior to and just after the go-live of the solution the Automatic Work state was working fine. However; now for some reason it has just stopped working? Has anyone seem this before in the latest versions of UCCX (8.X)? The customer version is System version: 8.0.2.11004-12
Any assistance appreciated.
Many thanks.
Steve

Make sure the CAD is 8.0.2.400.
The call has to be coming from the queue. Otherwise, it won't work.

Works in sqvi but not work in code

select-options :zu_vbeln for vbak-vbeln no intervals.
select MAKTMAKTX MAKTMATNR
    into (ITAB-MAKTX , ITAB-MATNR)
    from ( MAKT
           inner join VBAP
           on VBAPMATNR = MAKTMATNR )
           where MAKT~SPRAS = 'HE'
             and VBAP~VBELN in zu_vbeln.
      MODIFY ITAB.
    ENDSELECT.
any idea?
thanks.

Yehiel,
Then go with <b>'H'</b> !!!
Make changes in ur Query stated in BOLD .
select MAKTMAKTX MAKTMATNR
into (ITAB-MAKTX , ITAB-MATNR)
from ( MAKT
inner join VBAP
on VBAPMATNR = MAKTMATNR )
where <b>MAKT~SPRAS = 'H'</b>
and VBAP~VBELN in zu_vbeln.
MODIFY ITAB.
ENDSELECT.
Thanks
Kam
Note: Allot points for all worthful postings
Message was edited by: Kam

Flash website working in FF but not IE7

www.gamespamusic.net is
working in FireFox but not working in IE7 I dont know whats going
on here. Can someone help me with this??? Im trying to figure this
out but its seems like i cant lol. Please HELP

Ive also had others try it in both IE7 and FF and they come
up with the same problem where the screen is white in IE7 and it
works in FF. I dont know what the problem is.

RFC working in foreground but not working thru webdynpro abap

Similar Messages

Maybe you are looking for