RH7 upgrade to 7.0.1 prevents generate

After I install 7.0.1 upgrade I can't gernerate my project.
Took me awhile to debug this but it is the 7.0.1 upgrade that
causes my generate to lock up. No error during generation, it just
dies. I can uninstall the upgrade and everything is back to
normal.

Good thoughts Rick. Amazingly, the sample project works but
none of my 3 converted projects (from RH6) work. I tried deleting
the cpd, making a new SSLayout and all the usual stuff. The crazy
thing is that another techwriter I work with does not have this
probem with the same projects! I suspect it is some software
conflict or corrupt something or other on my PC but I have no idea
where to begin.

Similar Messages

  • Does upgrading from lightroom 4 to 5 generate a monthly fee?

    does upgrading from lightroom 4 to 5 generate a monthly fee?

    I have the standalone version. When I upgraded my system to Yosemite,
    without notice several apps no longer work as they were upgraded. Worst of
    all is Final Cut Pro was upgraded to a version 10.? Compressor, Parallel, V
    Malware Fusion and Motion.  I have a 2011 15" Macbook Pro. It doesn't have
    in particular the correct graphic card, which I cannot find for this
    computer.  Is there a way to downgrade Final Cut Pro  to what version or
    open thru the terminal?
    On Mon, Apr 20, 2015 at 4:08 AM, johnhawk666 <[email protected]>

  • TOC problems after RH5 - RH7 upgrade

    Hello,
    I use RoboHTML to create help projects.
    After upgrading one with several subprojects from RH5 to RH7
    the following problem occurs:
    the TOC of the subproject is not incorporated in the main
    TOC, instead the name of the subproject is shown. when clicking
    this, the subproject is opened in a new tab (tested on Firefix3 and
    Opera9.5), virtualy as a separate project.
    The same project was previously published with RH5, with the
    subprojects correctly linked.
    Also, I reveive the attached java error (again not existing
    with RH5) when opening the start page. if I substitute the newly
    generated WebHelp.jar with the old one (generated by RH5) the error
    ceases but the TOC problem persists.
    Any ideas?
    Thanks a lot,
    Norbert

    I recently tested the 9.0.1 upgrade and the hotfix for 9.0.1, but the problem still exists. However, "ColdFusion Jedi" Raymond Camden came up with a workaround. You can read about it here:
    http://www.coldfusionjedi.com/index.cfm/2010/9/16/Followup-to-CFGRID-MultiRow-Post
    The problem occurred when the Adobe team that released the 9.0.1 upgrade added "multi-row select" functionality to the HTML/AJAX version of CFGRID, but they failed to include the same ID-passing functionality of the previous "single-row select" implementation.
    I created a more generic version of Raymond's javascript function which finds the selected row(s). This javascript must reside on every page which contains an HTML cfgrid:
    <script type="text/javascript">
    function getSelected(gridName,idName) {
        obj = ColdFusion.Grid.getSelectedRows(gridName);
        var selected = "";
        for(var i=0; i<obj.length; i++) {
          if(selected == "") selected = obj[i][idName];
          else selected += "," + obj[i][idName];
        document.getElementById('selectedRowIDs').value = selected;
        return true;
    </script>
    To force the selected row's ID (or other) field to be passed to to the subsequent page, you must include the following in your CFFORM tag (the field name MUST BE in ALL CAPS):
         onSubmit="return getSelected('gridName','FIELDNAME')"
    Example: <cfform name="itemGridForm" action="editItems.cfm" method="post" onSubmit="return getSelected('itemGrid','ITEMID')"...>
    You must also include the following hidden field in your cfform which contains the cfgrid:
        <!---Pass the selected FileFolderID as a hidden field called "selectedRowIDs" to itemEdit page--->
         <cfinput type="hidden" name="selectedRowIDs" id="selectedRowIDs">
    On the called page, FORM.selectedRowIDs will contain a list of the selected rows' ID fields (or whichever field you choose when calling the Javascript function).
    Message was edited by: el-cott

  • Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc.  Help

    Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times  These are my warnings
    "Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services."  [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

    If the above steps haven't helped try installing:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    as appropriate.
    tt2

  • Prevent generating output

    I have an invoice batch process that is run for a range of invoices, but I want to prevent the invoice from being displayed if the invoice amount = 0.
    Currently I am using <?if:INVOICE_AMOUNT!=0 or INVOICE_AMOUNT!=''?> at the top of the page followed by <?start:body?> after the header and <?for-each@section:G_PROJECT_HDR?> to separate the invoices for each project. When I run the process, the invoices with an amount of 0 or null are generating a blank page. I want it to skip the 0 invoices and only generate output for those that have an amount.
    Any suggestions are appreciated. Thanks.

    Hi Tim,
    Thanks for the suggestion. I tried adding the 'for-each' clause at the top of the template, but it is still generating a blank page for the 0 dollar invoices, or where INVOICE_AMOUNT doesn't exist.
    I used <?for-each:G_PROJECT_HDR[INVOICE_AMOUNT!=0 or not(INVOICE_AMOUNT)]?> but that caused it to not display the data on the page.
    Thanks,
    Ed

  • Prevent generating thumbnails of video clips

    How do I restrict the generating of all those video thumbnails to a specific event from iphoto? I don't want all the clips from my iphoto library to be loaded into my current project.

    Hi David, thanks for the response.
    Actually, it wasn’t a case of a few un-linked clips being moved inadvertently. All 20 video clips at the end of the sequence were exactly 2 seconds out of sync. None of the clips prior to those were out of sync. I have no idea how that could have happened, especially only to those beyond the point in the timeline where I was working.
    I am normally aware of the 2 menu items: Modify/Link (Command + L) and Edit/Linked Selection (Shift + L). I sometimes use the first to unlink a single clip in order to delete the audio portion. The second menu item, which unlinks all of the clips has the potential to be dangerous and I almost never use it purposely. However, in this case, I used it to fix the problem (I think). What I did was do Shift + L to unlink everything. I then changed the scale of the timeline to so that I could see all of the unlinked audio clips so I could select them together, then moved them exactly 2 seconds to the right so that they now lined up with the video. I then did another Shift + L to relink everything and finished with a Save.
    The first time I tried to do as explained above, it didn’t work. The clips were lined up but FCE was still indicating 2 seconds out of sync. After that, I posted my question. While waiting for a response, I tried it again. I have no idea why it worked the second time.

  • Frame to PDF font conversion broken in upgrade to Frame 10

    I am using Adobe Garamond Pro font as body text.  In Frame 9, this worked fine, I was able to generate PDFs with correct text.  Now I have upgraded to Frame 10.  I generate the same file as PDF, and the body text looks good except for passages that have been marked as bold text. 
    Again, fine when the PDF was generated by Frame 9, but now the bold text is not correctly rendered.  Instead, I get an ugly monospaced, and very jammed-together, word.  Non bold text looks okay. Italic text looks okay.  But the bold text does not.
    Any suggestions as to how can I fix this? I looked in the Frame10 fminit\fonts directory, and AGaramondPro-Bold.otf is there. In fact, the directory looks pretty much the same as the Frame9 version.

    Okay, thanks. I think I have the problem solved, though I'm still not quite certain how it occurred.
    To trouble shoot the Frame 10 problem, I opened up a file in Frame 9 (didn't uninstall it when I upgraded to 10, so I have both installed) and saved as PDF, with the same results, but with an error message that pointed me to the Adobe PDF printer, even though I don't explicitly point to it anywhere. The message said to de-select the option that says "use system fonts only" in the printer properties dialog.
    When I did so, the problem went away.
    Thing is, I never intentionally changed any of the Adobe PDF printer properties. It was working fine in both 9.0 and 10.0 Frame then all of a sudden the problem appeared out of the blue.
    The only thing I can think of that changed between the time it worked and the time it failed is an upgrade from Acrobat to Acrobat X.

  • Having the animation issue with iOS 5 SDK generated build

    I am working on a enterprise application. I upgraded the xcode 4.2 and generated the build with iOS SDK 5. I observed the strange behavior in the animation of the views. The view are moving horizontally, even though we are setting the frame vertically.
    But if I run the app in debug mode, it works fine.
    Can anyone please help me?

    The following piece of code I am using in my application,
    Here pBgImageView is UIControl object.
                        CGRect frame =pBgImageView.frame;
      NSLog(@"frame x.o = %f, y.o = %f",frame.origin.x,frame.origin.y );           
                        frame.origin.y += (62 + 15);
      NSLog(@"frame x.o = %f, y.o = %f, bg.x = %f, bg.y =      %f",frame.origin.x,frame.origin.y, pBgImageView.frame.origin.x,pBgImageView.frame.origin.y );
    And the logs I am getting is,
    frame x.o = 15.000000, y.o = 88.000000
    frame x.o = 92.000000, y.o = 92.000000, bg.x = 15.000000, bg.y = 88.000000
    frame x.o = 92.000000, y.o = 92.000000

  • Generating report queries

    We recently upgraded and we use GR55 to generate report queries used in our financial reports. We are not sure which report groups we need to regenerate and we want to avoid regenerating all of them because for sure not all of these are in use. The way for us to identify if they are in use is to check if the query is attached to a transaction code that will run the query.
    Is there a way for us to check if a report group is used with a customized transaction code?

    check this Re: how to save pdf in APEX 3.0

  • Upgrade cucm,cuc,im&presence from 8.6 to 10.5

    hi guys
    i need assistance to understand the precise steps with the upgrade here.
    i read a lot about the ova changes,nic changes and more,but i m not sure about many steps here .
    is there anyone who upgrade successfully that can things sorted?
    tk
    shoham

    If they are already on the VMs then it is much easier:
    1. Get the refresh Cop file installed on all the servers (publisher first and then the remaining servers)
    2. Once you have done the Refresh upgrade, then very carefully read the exact version number, as you can do a direct upgrade to version 10.5 from 8.6, however you must be able to match the exact release number which CSCO allows to do a direct upgrade to 10.5, else you may encounter "this upgrade is not allowed" and then you will have to upgrade to 9.x and then 10.0 and then 10.5,  Hence it will save a lot of time,
    3. Once the upgrade has been completed, on the CCM Pub, enable the PLM for the license management.
    Just so that you know, once it is 10.x, the licensing system becomes a lot more different than 8.x, hence I will recommend that you keep all the PAKs handy BEFORE you attempt the upgrade.
    Once it has been upgraded, using the PLM you can generate a lic request and get the Lic directly to the servers or you can generate a lic Request file and get the Lic from TAC's help.
    4. In 10.x the system wants every user phone to be assigned with an "Owner ID" , so I will highly recommend that you take care of that aspect (by BAT) during the upgrade or right after it, else it will back to haunt you.
    All the best!

  • Can I generate .hlp files

    We just upgraded to Frame 9 (from 7.1) and RoboHelp 8. Prior to the upgrade, I was using WebWorks to generate my .hlp files - is there a way to generate .hlp and .cnt files with RH8?
    Thanks in advance!
    Debby

    Hi there
    Sounds like you are creating 32 bit WinHelp files. If you want to switch to 16 bit WinHelp files, the viewer is already present on Vista and Windows 7, so no download would be needed and WinHelp would still work.
    Whether WebWorks allows you to choose between 16 and 32 bit WinHelp files is another matter... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Attached libraries in wrong order in generated form

    Hello,
    I am using Designer 6i and upgraded 6.0 headstart templates to generate forms. In my generated form, the libraries are attached in the wrong order. For example, when I attach using called modules:
    - qmslib50.pll
    - qmsevh50.pll
    then the generated form has:
    - qmsevh50.pll
    - qmslib50.pll
    which is a problem because the application wants the QMS$INIT_APPLICATION from qmslib50 and finds the one in qmsevh50 first. So the generated form/application starts up with an error and doesn't work.
    What can I do about this?
    Jeroen van Veldhuizen

    Hi,
    There is a wealth of information on moving from 6.0 to 6i in the Migration Guide available on the Designer page on OTN
    http://otn.oracle.com/products/designer/content.html
    Regards
    Susan

  • Database upgrade from March 2013 to October 2013 Issue

    Hiya,
    Am I missing something completely obvious trying to upgrade a March 2013 PU content database to a October 2013 CU and it's failing, using Mount-SPContentDatabase.
    The farm account and my install user has the DB_Owner and SPDataAccess roles, however I still get the "schema versions does not match".
    The March is Production and the Dev is October. The plan is to upgrade Production, atlas not right now now.
    As far as I can see there is no CU requirements between March 2013 and October 2013?

    1: Hard to get access to Production server right now.
    2: Yes, however any custom components should not prevent the attach/upgrade. It might render the site unusable or create warnings in the upgrade process. But not prevent it.
    3:
    Microsoft.SharePoint.Upgrade.SPUpgradeException: This content database has a schema version which is not supported in this farm.     at Microsoft.SharePoint.Administration.SPContentDatabaseCollection.Add(SPContentDatabase database, Boolean
    provision, Guid webApplicationLockId, Int32 addFlags)     at Microsoft.SharePoint.Administration.SPContentDatabaseCollection.Add(Guid newDatabaseId, String strDatabaseServer, String strDatabaseName, String strDatabaseUsername, String strDatabasePassword,
    Int32 warningSiteCount, Int32 maximumSiteCount, Int32 status, Boolean provision, Guid lockId, Int32 addFlags)     at Microsoft.SharePoint.Administration.SPWebApplication.AddContentDatabase(SPWebApplication application, String strDatabaseServer,
    String strDatabase, String strDatabaseUser, String strDataba...    916c6142-9501-42b6-a1e9-5d9418588008
    ...sePassword, Int32 cSiteWarning, Int32 cSiteLimit, Boolean bAssignDatabaseId, Int32 iAddFlags)     at Microsoft.SharePoint.PowerShell.SPCmdletNewContentDatabase.InternalProcessRecord()     at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord()  
     916c6142-9501-42b6-a1e9-5d9418588008
    Error Category: InvalidData    Target Object  Microsoft.SharePoint.PowerShell.SPCmdletMountContentDatabase  Details  NULL  RecommendedAction NULL    916c6142-9501-42b6-a1e9-5d9418588008

  • Java.io.StreamCorruptedException after rolling upgrade

    Hi,
    After removing a first class citizen Class file A in Version2 and performing a rolling upgrade from Version1 to Version2 of our software we find an entry for Class A in replicated cache of Version2. Once we try to read / remove / or overwrite it with null we get a "java.io.StreamCorruptedException".
    Is there a way to get rid of these kind of entries in the cache after rolling upgrade is performed or even prevent Class A to be added into the cache during de-serialization?
    Thanks 

    I'm not quite sure what you mean yet. Are you talking about the server code or the client code? And, can you be a little more specific on where the problem is? I'm sorry, it's just that I've spent quite a while on the code and I haven't found the problem yet. Thanks again.

  • Physical Standby Upgrade?

    I recently upgraded the primary database running in the MAXIMUM PERFORMANCE mode.
    How do i upgrade the physical standby? The database is upgraded from 9208 to 10205.

    Install 10205 and build a new standby database under this environment.
    I hope the following would have been the best method for upgrading standby along with primary
    1.Review and perform the steps listed in the "Preparing to Upgrade" chapter of the Oracle Database Upgrade Guide.
    2.Shut down the primary database.
    3.Shut down the physical standby database.
    4.Install the new release of the Oracle software into a new Oracle home on the physical standby database system, as described in the Oracle Database Upgrade Guide.
    5.Mount the physical standby database.
    6.Start Redo Apply on the physical standby database.
    7.Install the new release of the Oracle software into a new Oracle home on the primary database system as described in the Oracle Database Upgrade Guide.
    8.Upgrade the primary database as described in the Oracle Database Upgrade Guide. Note that the physical standby database will be upgraded when it applies the redo generated by the primary database as it is upgraded.
    9.Open the upgraded primary database.
    Edited by: G Srikanth on Jul 14, 2011 2:49 PM

Maybe you are looking for