RH7 - Viewing WebHelp in IE9 creates two vertical scroll bars

An extra frameset appears to be in the main htm page (attached) that is generated by RoboHelp. Here’s the frameset:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When viewing the help in a Telerik RadHtmlPlaceholder control in Internet Explorer 9, this frameset causes our help content to appear twice. The content is stacked on top of each other, and a vertical scroll bar is added.
Manually removing this frameset resolves the issue.
Has anyone else seen this issue, and if so, are there any RH options for resolving it?

While I was using RoboHelp 7, I worked around the frameset problem by deleting the following code from the main pag in my help system, as suggested in the forum:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When I did so after generating help in RoboHelp 7, I found that the extra frameset disappeared from IE9. Later I upgraded to RoboHelp 9 for an automated solution to the extra frameset in IE9. But I find that the problem persists. On WebHelp pages with more than a single screenful of text, the double frameset appears, and the content for the page one is viewing is stacked on top of the Welcome page, much as described by TechComm2 at the beginning of this thread. In IE9, with content generated in RoboHelp 9, an extra frameset appears whether I delete the abovementioned code or leave it in.
My project is used as contextual help. Our developers have placed extra security on the project so that a user cannot view the help without first logging in to the application it describes. Because of this, I am asking our developers to help me look for a solution to extra framesets. But I did want to come back to this forum with an update and ask for additional comments from you-all as well.
Thank you.
Tom

Similar Messages

Removing the Vertical scroll bar from the content area.

Hello,
Is there a way to remove the vertical scroll bar from the content area?
I am trying to create a new light portal frame work.
Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
Thanks in advance.
-Sudheer

Hi
There are a couple of ways in which to achieve this
1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
I hope this helps
Darrell

Vertical Scroll bars in analysis - View all rows

Users want to see the whole report displayed in one page with only a vertical scroll bar. They do not want the up/down arrows. Is this possible in OBIEE?
Thanks.
Ad

To implement the solution, please do:
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do excel export to verify.
Thanks...

Text editing window expands instead of creating vertical scroll bar

In the last few days, I have noticed that when I try to edit or post to Wordpress.com the vertical scroll bar no longer appears on the text editing box. Instead the box just gets progressively larger which makes it very difficult to get to other items on the WordPress editing screen, such as tags and categories. This problem seems to have arisen during the v31.0 auto-upgrade. Is anybody else having this issue and what steps can I take to solve it? (FYI, I tried modifying the setting described in another response about a similar issue using the about:config screen, with no success.)

I don't know whether your dashboard has the "Visual" and "Text" buttons, but I believe the Visual uses CKEditor or another WYSIWYG editor and the Text editor might be a simpler design. Are both affected?
I searched around to see whether I could find Wordpress.com support threads or other stories about it and I can't. So I'll fall back on some general suggestions:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove WordPress.com cookies without affecting other sites.
Then try reloading the page. Does that help?
To rule out extensions as a possible culprit, could you try the site in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions, some advanced features, and some custom settings. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* (menu bar) Help menu > Restart with Add-ons Disabled
Note: Flash and other plugins still run
After Firefox closes, a small dialog should appear: click "Start in Safe Mode" (''not'' Reset)
Any difference?

URGENT! How do I create a vertical scroll button in Flash CS6 for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

In the viewer going to vertical scrolling bar I get a jump to original position...

Scenario:
In the viewer I'm working with the mouse vertical scrolling for searching some scenes, then I go to vertical the scrolling bar of the window to scroll in bigger steps... well, the viewer jumps to the previous position.. so I have to start my searching again.... and every time I go the vertical scrolling bar I get this jump to the original position... Very annoying....

Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Vertical Scroll bar not using all view port space

I'm developing an ADF application in 11g to be used on a PC and under the browser on an IPAD. My top page layout has a panel group layout of scroll. When the page renders in IE it does not consume all the available viewport. The vertical scroll bar stops about an inch above the bottom of the page. On the IPAD, when I have the device in portrait orentation, I only get about half the window area. I need to have the page render in all the available space on the viewport, especially on the IPAD. Can anyone tell me how I can get the page to render and take up all the available space in the viewport?

I did try that. I was having some issues with trying to put everything I had on the page inside of one. I think it actuall turned out to be something else. I was messing around with things on the page fragment. ADF was adding a scroll bar but not using the whole page to do so. I took the scroll panel off the page fragment and off of any other page fragment including the actual JSF page. When I set a large heigth for the page on my top panel group, which I had on the main page that contained the bonded task flow region, I got the browser to create the scroll bar for me for the whole page. It fixed the problem on the PC and it also fixed the issue I had with the page rendering on the IPAD. The IPAD now allowed the whole page to be scrolled by sliding your finger.

HELP! How do I create a vertical scroll button for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

On every website, my right vertical scroll bar is missing and all of my Toolbar bookmarks unless I minimize the window, click "view" and "full page." How do i get it back to NORMAL?

When I hit "full page" the right vertical scroll bar re-appears, but my bookmark toolbars, my bing bar, and pretty much the entire top 2 inches of my screen disappears. When all of these things are showing, the right vertical scroll bar disappears, and the entire webpage shifts to the right, so I can't see most of the right side of the page. How do I fix this?

Welcome to Safari 6 with:
. . t . . a . . b . . s . .
That are the size of tractor-trailer trucks!
There is no known way to get them smaller except when you get a lot they will "shrink-to-fit".

No vertical scroll bar in dock stack grid view

using osx 10.6.4; in regards to the dock stack grid view -- do i have to enable the scroll bar in the stack grid view because i am not seeing any scroll bar except the "open in finder" arrow ?
thanks for your help !
Message was edited by: newbeetle

answered - not enough files within the stack grid view to make the scroll bar appear.

Help with a vertical scroll bar issue with a List component

hi. i have a basic <s:list> that uses an XMLListCollection as it's data provider and a very basic itemrenderer. when a row in the list is clicked a function gets the list.selectedIndex then populates some text fields with more xml data. that all works fine.. the problem i have is that the vertical scroll bar on the list seems to be "clickable" - just like a row in the list. the scroll bar scrolls normally but when it's clicked the selectedIndex becomes -1 which is not helpful b/c the value -1 is passed to the XMLListCollection.
any ideas? cheers.

thanks but still problematic...surely the <s:List> component shouldn't return a value when the scrollbar thumb is clicked? i created a very basic list (see below) and made the list dimensions short enough so that there is a vertical scrollbar and found that when the scrollbar thumb is clicked the trace(event.currentTarget.selectedIndex) returns a number. that's annoying b/c i just want a selectedIndex value for a row that is clicked not the scrollbar.
any ideas to get around? cheers
<fx:Script>
<![CDATA[
protected function list1_clickHandler(event:MouseEvent):void
trace(event.currentTarget.selectedIndex);
]]>
</fx:Script>
<s:List x="162" click="list1_clickHandler(event)" y="276" labelField="@label" width="144" height="153">
<s:dataProvider>
<s:XMLListCollection>
<fx:XMLList xmlns="">
<node label="one"/>
<node label="two"/>
<node label="three"/>
<node label="four"/>
<node label="five"/>
<node label="six"/>
<node label="seven"/>
<node label="eight"/>
<node label="nine"/>
<node label="ten"/>
<node label="eleven"/>
</fx:XMLList>
</s:XMLListCollection>
</s:dataProvider>
</s:List>

No vertical scroll bar using Safari or Firfox

I created my own website using Dreamweaver CS3 and it looks great using IE. I just viewed it in Safari and Firefox and noticed there is no vertical scroll bar on the right so people can not see the bottom half of my pages. I have researched this online and nothing seems to be working. Any ideas will help. My website is www.binglevet.com if that helps anyone view the source code. Thank you. Caroline

You are awesome! I actually did run that report and there was this message; however, I didn't realize it was the main cause for many to be unable to view my site when using Firefox or Safari. I deleted the line and it now scrolls in both browsers. Thank you for the help.
Unsupported value: 'fixed'
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #2A1F55;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
position: fixed;

How to Enable to vertical scroll bar in a table control

Hi,
I have created a table control with a wizard and later did some modifications on it. Problem I have now is that the vertical scroll bar is disabled on this table control. The end user wants to enter as many rows as possible, however as the scroll bar is disabled, he is not able to add the rows at the end (of the visible table control area).
How do I enable the vertical scroll bar of the table control?
Please help.
Thanks,
Vishal.

Hello Vishal,
In PBO.
Create a Module and in the module increment the value of tbcl-lines.
ex:
Data : L type i.
IN PBO.
MODULE vertical_scroll_bar.
MODULE vertical_scroll_bar.
DESCRIBE TABLE itab lines L.
<table control name>-lines = L + 10.
ENDMODULE.
Hope this solves your issue.
Cheers,
Suvendu

Vertical scroll bar on tab page.

Hello,
I have to show vertical scrollbar on my tab canvas.
I have one Content canvas on which I have 1 tab canvas with 8 tab pages.(sec1,sec2,sec3 ..sec8)
I have another tab canvas(kind of seb section for the above and each has 3 tab pages) like
Sec1 will have (sub sectiion tab canvas) which has again 3 tab pages 1.1,1.2,1.3 and soon
now on the third tab page of the sub section or second tab canvas, I need vertical scroll bar to fit number of fields which are more than the tab canvas size.
all are from the same data block
Could you please help me. i tried by creating staked canvas but no luck.
can you please let me know the procedure to be followed
Thank you in advance.

Could you please help me. i tried by creating staked canvas but no luck.What happened when you tried to use a stacked canvas?
If the items in the area you want to scroll are all in the same datablock you can set the Scrollbar properties of the block to be displayed. This will enable scrolling of the items that are within the specific block. If you items are assembled from more than block, then using a stacked canvas is a better option for enabling scrolling within an area.
Also, what is your Forms version?
Craig...

Vertical Scroll Bar on the device display

Hello,
I had the problem with both horizontal and vertical scroll bars. Managed to get rid of the horizontal scroll bas using the parameters ~itsmobileelemfactor and ~itsmobileelemunits but the vertical scroll bar is still there. As our transactions are developed internally, I managed to sqeeze the screen elements but still the vertical scroll bars are there.
I am testing with Intermec CK3 device with Intermec Browser.
I was going thru this forum and someone has suggested to modify the CSS.
Can someone help me which html parameters are required and under which css class e.g. font size, line-height etc to reduce the overall screen size? I am not good in HTML.
Thanks in advance.
Regards
Narottam

Hi Oisin,
Parameters in SE80:
~GENERATEDYNPRO = 1
~ITSMOBILE = 1
~SOURCES = ZZITS_IB_LM00,ITSMOBILE01,ITSMOBILE
~THEME = 99
~TRANSACTION = LM01
Parameters in SICF:
~ITSMOBILE = 1
~TRANSACTION = LM01
~THEME = 99
~SOURCES = ZZITS_IB_LM00, ITSMOBILE01,ITSMOBILE
~POPUPS = 1
~WEBTRANSACTIONTYPE = EWT
~ITSMOBILEDEVICEINCLUDE = ZZ_IBROWSE
~ITSMOBILEELEMFACTOR = 8
~ITSMOBILEELEMUNIT = px
I know you helped me earlier and provided two OSS notes. Those nores are installed.
Again, please let me know what I am missing to get rid of the vertical scroll bar. Strictly we have followed 16X20 screen size which is SAP RF standard.
Regards
Narottam

RH7 - Viewing WebHelp in IE9 creates two vertical scroll bars

Similar Messages

Maybe you are looking for