Ripping dvd footage to Final Cut and re-exporting to DVD

Greetings,
I'm taking footage off of various dvd materials with the intention of bringing them into final cut and re-exporting an edited product onto dvd. My method has been, thus far: to rip whichever chapters I'm looking for using Mac the Ripper, bring the chapters (VOBs) into MPEG Streamclip for 100% quality conversion to the 'Apple DV - PAL' setting, and then bringing those files into final cut for editing. However, it seems no matter what my export setting is, I'm getting quality loss on the finished product - a bit of pixelation (most evident on high-def televisions), etc. Converting the .VOBs to an Uncompressed setting wouldn't work as I'm working with hours of accumulated footage and the space it would consume wouldn't be a possibility. What I don't understand is why, when I burn a cloned dvd using Mac the Ripper there's hardly any quality loss at all, but here I'm getting quite a bit. Is this due to a re-compression happening somewhere? And is there any way of getting rid of it? Your help is greatly appreciated. Thank You.

There is about four or five generational losses in your workflow.
There isn't a way around that.
Use the original footage to preserve quality in the process.
Plus, why is MacTheRipper necessary with non commercial DVDs?

Similar Messages

How can I import DVD footage in Final Cut Pro X

I want to edit a showreel of my own work in Final Cut Pro X (version 10.1.4). A lot of my old footage is only available on DVD. I need to get this footage into Final Cut Pro X but don't know how to do this. There are programs to convert DVD to DV but I don't know which one to use, and how to use them.

The script provided by MPEG Streamclip worked for me.
But there is an alternate way, which is basically doing by hand what the script does.
The actual component that is needed is stored inside an archive file in the inside the package. This file needs to be copied to a place where the system can see it.
Here are detailed instructions. Be sure you fully understand before putting any files in the Library folders, as described below. No guarantees, but if followed correctly I believe this works.
1) Double-click the .dmg file.
2) Inside there are two folders. Open the one that says "For Quicktime 6.4 or later..."
3) Control-click the QuickTimeMPEG32.pkg and choose "Show Package Contents".
4) Copy the file "Archive.pax.gz" somewhere else on your mac - I will use the Desktop as an example.
5) Double click the copy of "Archive.pax.gz" on your desktop. It will expand and create a folder on the desktop called "System".
6) Inside the folder called "System" is a folder "Library" and then "Quicktime", with a single file called "QuickTimeMPEG2.component".
This is the file that MPEG Streamclip needs!
7) I suggest you place this file in your own user's Library. To do this, hold down the option key and select Library from the Go menu in the Finder. There, if it does not exist already, create a folder "QuickTime" and copy the component there. This should work.
Note: the script actually places the component in a different location - one which I think should not be messed with (inside /System/Library).
I think it should work in the user's Library, but if not I would put in /Library (the Library at the root of the drive) before trying the location above.

Getting DVD footage into Final Cut X?

Hi,
I am an actor who has just got Final Cut X and want to edit my showreel on it. I have various dvds of my work. Could anyone please suggest the best way to convert the dvd and get them into Final Cut please?
All the best, Anna

I'm trying to do the same thing. I have an unprotected DVD which I am trying to import into Final Cut Pro X but the "free" MPEG Streamclip software which you mention says that:
"The Apple QuickTime MPEG-2 Playback Component is not installed...
You will miss the two most important features of MPEG Streamclip:
- you won't be able to play MPEG-2 files and transport streams;
- you won't be able to convert MPEG-2 files and transport streams to QuickTime, DV, AVI.
However, all other features are always available, including playback and conversion of MPEG-1 to QuickTime, DV, AVI, demuxing of MPEG-1 and MPEG-2, AC3 decoding, and conversion from transport streams to MPEG files (useful if you have Toast 6).
MPEG Streamclip is free of charge but the MPEG-2 Playback Component has a small price (around $20/£15/€20 in most countries); you can buy it online from Apple:
http://www.apple.com/quicktime/mpeg2"
Hm....How do I get the right format for FCP X?
Thanking you.
Mitaka27

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

How do I revert to original footage in Final Cut Pro X version 10.0.9?
For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
Only the edited version which is no good without the audio?
Please Help

What format is your problem clip? Are there wave forms visible in the section without sound?
Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
Russ

I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Final Cut and QT can't view/edit PAL HD footage recieved from Germany...

Final Cut and QT can't view/edit PAL HD footage I recieved from Germany - I spoke to filmer and he told me that it is HDV 1080i50.
I downloaded program VLC and was able to view the footage through there.
When I import it into FCP, it ether shows a black screen or crashes immediately - in QT, it only shows a white screen.
I have downloaded the QT plugin for MPEG movies.
PLEASE HELP!!!

If it's MPEG-2, chances are its a muxed file. You should be able to use MPEG Streamclip to demux and convert the file into whatever format matches your FCP Sequence specs.
But 1440 x 81? That doesn't sound right at all.
-DH

How do I get from an HD sequence in Final Cut Pro to a regular DVD?

Hi,
I'm finishing my first HD project, and I'm trying to get it onto a normal DVD, and I can't figure out how I should export it out of Final Cut and what settings I should use in DVD studio pro. I need the dvd to play on normal, couple year old dvd players.
Help!
Thanks,
Sarah

You should export a master file from FCP using Current Settings (same as your Timeline) as a Self Contained or Reference movie -Self Contained is preferable as it creates a file that is independent of the source footage and render files.
Bring that into Compressor and choose one of the time based DVD settings that the duration of your movie will fit into. Import the resulting MPEG2 video and AC3 audio files into DVD SP.

Working with Canon 5D MarkII H.264 Footage in Final Cut Studio - 5, Not 6

I'm new to this whole posting thing, but I'm hoping I can get some help. I'm just now starting to try to edit video footage from my Canon 5D Mark II in Final Cut, but I do not have FCP6, I have FCP5. I'm starting to realize this may be a problem, as it does not seem to have any sort of 1080 30p setting for video.
So...what I've done so far is to down convert to 720 p30 (I guess) using MPEG Streamclip, and then work with it that way. But I'm losing a lot of nice information, right? (Wrong?)
Obviously, I'm very new to the whole HD thing, so please go easy on me. I'm just hoping that there is some way that I can edit the lovely 1080 30p footage in Final Cut Studio Version 5, and then output a looped 10 minute video via DVD Studio Pro.
Anyone??
I appreciate any guidance.
- dawn

Strangely, that is just not one of the options that shows up for me - I get the huge list, but no 1080p 30. In fact, no 30p anywhere to be found except for the 720 p30.
I wonder if there is something I can download?
I keep running into posts telling me I have to have version 6 - there MUST be something I can do in 5!! I hope, I hope...
- dawn

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

How do I get HVX200 footage into Final Cut 4.5?

This may be a redundant question, and I am currently in the process of waiting for my upgrade to Final Cut Studio to arrive in the mail, but in the meantime, just received a HVX200 camera in the mail yesterday and was wondering if it is possible to get the footage in my computer. I followed the instructions in the operation manual and my G5 did recognize the camera as a separate drive via Firewire on the desktop which is full of .mxf files. Being new to HD video, I just did a basic Firewire hook-up from the camera straight into the computer and hoped that I would be able to capture the footage via Final Cut 4.5 HD. Obviously I was wrong. After doing some research, I've seen several ways of getting the footage into the system, most of which refer to the latest version of Final Cut Studio, but nothing much on how to get it into 4.5 other than some confusing mentions of somehow converting the footage in Quicktime files. If the .mxf files can be converted into Quicktime and then edited in Final Cut 4.5 until my upgrade arrives in the mail, can someone please help me with this? The bad news is as of now I only have Mac OS X version 10.3.7. I do plan on upgrading very soon, but was curious if it is still possible to make the HD footage editable on the system I currently are running - 10.3.7 and FC 4.5. If anybody could help, I would appreciate it very much.
Mac G5 Dual-Processor with Final Cut HD 4.5 Mac OS X (10.3.7)

Do I have to be running the latest version of Tiger for this to work? I ask because the new Quicktime download method did not work from OS 10.3.9. Maybe I'm still doing something wrong. Either way, I'm completely confused. First of all, what mode does the HVX200 need to be in? MCR/VCR or PC/DUB mode? My main question is how to convert those .mxf files into editable and viewable Quicktime files. Can I select a "convert" option somewhere? Am I overlooking something here completely? The thing that baffles me is the Firewire cable running from the tower to the camera displays the HVX200 files on my desktop under a white-drive icon that reads "no name". I just so badly want to grab them and convert them to editable Quicktime files that my 4.5 Version of Final Cut will import and recognize. Looks like that would be a relatively easy thing to do, but apparently not. Honestly, all that I got out of the link that you attached was apparently just how to upgrade to the latest version of Quicktime which would recognize "XL1" footage, not HVX200 HD footage. The posting didn't appear to be directed towards the HVX200/FCP 4.5 solely.
In your original posting, you mentioned that FCP 4.5 would actually allow HVX200 footage in or at least knew a way to go about getting the footage into a system like mine. My question is, from your personal experience, can you give me a more accurate step-by-step description of what I need to do from hooking up the HVX200 to the G5 tower via Firewire and so on....
It just seems that only upgrading Quicktime doesn't really get me anywhere near where I need to be. As I just try to figure out the common-sense of this all, it sounds like the computer IS recognizing the camera and the P2 card - hence the icon the appears on my desktop full of my video files labeled as .mxf files. So from here, the only thing that I can figure is that the only way to see my clips are to convert those files into another file (such as Quicktime) that FCP 4.5 wouldn't have any trouble reading??? CORRECT???? Seems like this is the only way it's gonna fly on the system I have...until I get the FCS upgrade. That said, I've got a two week wait and I'm impatient to watch my footage on my high quality Apple monitor!!
Sorry to be a bother about this, but any additional help is welcomed!

How do I set up my Sony HDR-FX1000 to import footage to Final Cut Pro 7, I get an error message.

how do I set up my Sony HDR-FX1000 to import footage to Final Cut Pro 7, I get an error message "attempt to capture video without a video device selected. Please select a video device in your capture presets and try again."

Hi,
1. Make sure you have the camera connected via Firewire (i link)
2. The Camera is turned to "play" and, if you are capturing HDV, in the camera menu, it is set to i link "OFF"
DM

Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Ripping dvd footage to Final Cut and re-exporting to DVD

Similar Messages

Maybe you are looking for