Risk with Locking and changinf password for SAPCPIC

Hi All,
Please advice if there is any risk with locking and changing password for SAP standard user SAPCPIC .We are on system 4.6D .
Somewhere I could find that if there is any RFC destination defined with this user then it may cause problem after locking .I found following entry in RFCDES table .
a I
M=200,U=SAPCPIC,L=E,v=3FB20DF66CA32E419606388B51,
But I could not find any entry in sm59 for this .What is this entry as it is not there in SM59 .
Any other known risks pls tell me .
Thanks,
Chittaranjan

Can password of SAPCPIC user be changed without any problem?
We are on ECC6.
Report RSUSR003 refer to note 29276 and note says that changing password will cause problem with SM51 and some other report as the password is hard-coded there. Though this note seems to be bit old.
Edited by: Pawan Kesari on Jun 9, 2009 7:58 PM

Similar Messages

Trouble with cut and paste password for wireless network

Command - C, Command-V did not let me paste wireless password from text edit. Any suggestions as to why? I was able to do so with right click.

It is one of mine. Yes. It connects to it no problem, just doesn't connect to the actual internet. Network diagnostics has all green lights until the ISP and/or Internet point. If I walk through diagnostics, it will get to the point where it says that the network requires a WEP password. I don't know why it does that because my network is not password-protected (husband claims it doesn't work well with his VPN system to get into work network). If I leave it blank, the connection will work. Eventually, after the computer is put to sleep, I will have the same problem upon waking up. I just tried renaming the network and removing all preferred networks and rebooting. Let's see how that works.

Got a new iPad and set up to sync with iCloud and now asking for password which I never set. How do I get on device if I don't know what it thinks password is?

Help. I just got a new iPad 2 and set up sync with iCloud and no password. Now asking for a password and I never set one up. What password does it want: iTunes, iPhone (no real password there either). Tried as many passwords as I could think with the iPad locking me out since I don't have the password! Would like to use the iPad but can't get on to try it.
Thanks.
Desparate

So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
Yes... sorry.
In the future, if need be, you can re download your purchases for free > Downloading past purchases from the App Store, iBookstore, and iTunes Store
Good rule of thumb is to back up your purchases regardless > Mac App Store: Backing up your app purchases

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

A picture of a USB plug is on the screen with an arrow pointing to Itunes. when I connect it to our pc, the device is locked and is asking for a security code. I do not know the security code.

A USB plug picture is on my screen with an arrow pointing to ITunes. When I connect the Ipod to my computer, it is locked and is asking for
a security code. I do not know the security code.

Place the iPod in recovery mode and then restore it via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Lock and Unlock user for a period of time

I need to lock a specific su01 user for a specific period of time each day. Does anyone have any idea how to accomplish this task?

Hi Lye and Elvira,
I am not logged on, but fairly certain that calling FM BAPI_USER_GET_DETAIL will also deliver the lock status / reason and user existence check etc, which means that the program can react appropriately to the UFLAG lock and the reason for it (if coded to do so). It would also spare the select on USR02 which might change or even be blocked.
A bigger problem I see with preventing a user from doing something from a certain point in time onwards using this lock-approach, is that the user might already be logged on!
@ Elvira Knight and ELVIRA KNIGHT regarding points: You have 2 SDN ID's now. You need to logon as the ID which created the thread (Elvira Knight originally asked the question) either by using the P- or S-number from the registration or the email address (you might need to temporarily change ELVIRA KNIGHT's email address to do that). Then you will be able to assign points for the thread which you started as Elvira Knight.
Theoretically I could add the points for you, but I prefer not to interfer in the decisions and points of SDN members (it is a free world - unless there is points collaboration...). The future of the points-system is indeed also hanging in a bit of a balance because of that reason. You can email me via the address in my business card if you need some help.
Cheers,
Julius

I changed my apple id and my password for it too. but on my ipod and mac book pro my old apple id keeps showing up and i it doesn't except any password. what should i do??

I NEED HELP!!!!!!
i changed my apple id and my password (for the apple id), but on my ipod and mac book pro my old apple id keeps showing up for icloud, and i cant put either password!!! Trust me i tried.. What should i do???? So please help!!!!!!

On your Mac, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
If you're running iOS 7 on your iPod and old ID is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT1688 Scenerio: Walking in the park and I collaspse unconscious. how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened. I am now considered Jane Doe cause I dont have any ID

how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened. I am now considered Jane Doe cause I dont have any ID on me.

If you're concerned, you could always create wallpaper with some sort of ID/contact information and place it on the lock screen. I wouldn't suggest using any direct contact for you, of course, for privacy reasons, but perhaps some sort of "neutral" emergency contact such as a relative's cell phone.
Or just carry some sort of ID; depending on a cell phone for identification probably isn't reliable regardless of the phone used. A MedicAlert bracelet or something similar might be your best option since that would allow emergency responders to get your information while still protecting your privacy.
Regards.

How to get the lock and block occured for the full day

Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?

Hi,
How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
mins and insert its record in table which you can refer at end of the day.
This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
If you are looking for doc for troubleshooting blocking below is one you can refer
http://support.microsoft.com/kb/224453
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

My Apple Earphones with Remote and Mic White For iPhone says: made in vietnam. i want to know if they are OEM?

My Apple Earphones with Remote and Mic White For iPhone says: made in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

HT4061 my phone is locked and is asking for a 4 digit code that I don't have. I cant get any info from the phone because it is locked. HELP

my phone is locked and is asking for a 4digit code. I have not idea what that would be. I have entered every thing I can thing of and nothing works. Please help.

If you are unable to remember your code you will need to restore the iPhone. Take a look at this link, http://support.apple.com/kb/HT1212

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

How to sign in? (problem with username and/or password)

I created an account long ago for the Support Communities with an Apple ID: xxx.mac.com.
I created an account not so long ago for iTunes with an Apple ID: xxx.gmail.com.
Where they suppost to be the same? Wasn't sure. In any event, I've been using them both without a hitch. Then I realized that I could have a password recovery problem with my Support Communities account because I haven't had the xxx.mac.com email address for several years now.
Problem: When I use my older Apple ID for Support Communities, it will not allow me to change my email to my current xxx.gmail.com address. I suspect it recognizes the address is already being used with me newer Apple ID for iTunes. My solution was to simply ditch the older ID and try signing in with my newer ID. Unfortunately with that route, I get:
"We're sorry. Your account could not be created due to system issues. Please contact Apple Support Communities with the information below to create your account." [Which I've done, but no response.]
Questions: Are the ID support to be the same or different? Either way, it doesn't really matter to me, but I either need to update my address for the older ID or be able to use my newer ID in Support Communities. Because of this, I'm unable to use any type of email notification and I'm afraid I could have a problem with password recovery if I were in that position.
Thanks for any comments.

Problem solved and completely my error.
My login with the old Apple Discussions was [email protected] At some point, with the new Apple Support Communities, some time ago, I was prombed to create a new account and I did so. My username was simply "xxx" without the "@mac.com".
So that was the problem. My old [email protected] still had my old address. I kept logging in with this ID and kept trying to update my address. Where I thought it was recognizing that this address was already used with my iTunes account, it was because it was used with my newer Support Communities ID (xxx) that I didn't even remember I had created.
Turned out it was something so simple. (I hate when that happens.) I had to play my "idiot card".
Thanks to Apple support for the direct email correspondence that finally got me on the right track.

Risk with Locking and changinf password for SAPCPIC

Similar Messages

Maybe you are looking for