RMAN-06059: expected archived log not found
I'm using Backup Exec Remote Agent 11d to backup a Oracle 9.2 database runing on a Windows 2003 platform. Some ARC files have been manually deleted.
I've tried using "corsscheck archivelog all;" but then I found that the Remote Agent has been configured NOT to use recovery catalog. Thus, RMAN uses the target database control file as the sole repository of metadata.
Is there a way to clean up the reference to the missing ARC files? Thanks!
Crosscheck command does not need a catalog to work. When you see RMAN-06059 controlfile obviously knows archivelogs, which should be in place, but were already moved from disk. So 'crosscheck archivelog all' should mark such archivelogs as EXPIRED.
Werner
Similar Messages
-
Hi,
I want to run the RMAN backup, but I lost some of the archivers. How to take the backup excluding those lost archivers?
Thanks,
GKOnly as note: You are faced to the error RMAN-06059.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 03/05/2006 12:43:42
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: errore nell'identificare il file C:\ORACLE\DB\TEST\ARCHIVE\1_36.DBF
ORA-27041: impossibile aprire file
OSD-04002: impossibile aprire il file
O/S-Error: (OS 2) Impossibile trovare il file specificato. -
RMAN-08120: WARNING: archived log not deleted, not yet applied by standby
i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary You already have answer by post of Mseberg.
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!this is wrong query used on primary & standby. even if any one of archive gap available lets suppose sequence *44020* , this archive not transported to standby due to some network problem and so on. later if archives from *44021* all the archives transported on standby upto *44051* , then it shows the maximum sequence transferred to standby, It wont shows applied sequence.
Check the below queries.
Primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
Standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
HTH. -
RMAN-6089: archive log not found or out of sync with catalog
Hi:
I am using OEM, not RMAN, to do a DB backup and got the above error message. I think the problem is caused by some archive logs missing from my NT machine.
I tried to manually copy from an existing archive log and rename it to the missing archive log but it didn't work.
I then tried to backup the archive logs only, not whole DB, and specified "delete input" option, and the process completed successfully.
However, when I tried to re-do the whole DB backup, it failed with the same error.
I looked at v$archived_log and I can see all archive logs, including the ones from previous incarnation and the missing ones from the current incarnation. How can I delete them or change their status (from OEM not from RMAN) from not deleted (NO) to deleted (YES) in order to perform a DB backup?Hi,
I'm using controlfile for rman. I've issued "change archivelog all validate" before a full backup Before the full backup, I had a incremental backup process crashed(don't know why), which left some entres in v$archived_log. I have no problem completing the rman backup, but "restore archivelog all validate" command gives me "falure of restore..." and all those seq can be found in v$archived_log with "yes" for deleted column. Does that mean controlfile is still not in sync with the system? I don't need those target seq because those were before the full backup. Will there be potential problem later on during recovery? How do I (or when Oracle server will) get rid of those entries in v$archived_log? Thanks.
RMAN> restore archivelog all validate;
Starting restore at 11-AUG-05
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=28 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/11/2005 10:20:24
RMAN-06026: some targets not found - aborting restore
RMAN-06025: no backup of log thread 1 seq 1048 scn 122640071 found to restore
RMAN-06025: no backup of log thread 1 seq 1047 scn 122572176 found to restore
RMAN-06025: no backup of log thread 1 seq 1046 scn 122431604 found to restore
SQL> select name, completion_time,deleted from v$archived_log;
NAME COMPLETIO DEL
/u04/arch/arch_1_1046.arc 10-AUG-05 YES
/u04/arch/arch_1_1047.arc 10-AUG-05 YES
/u04/arch/arch_1_1048.arc 11-AUG-05 YES
/u04/arch/arch_1_1049.arc 11-AUG-05 YES
/u04/arch/arch_1_1050.arc 11-AUG-05 YES -
RMAN-08137: WARNING: archived log not deleted as it is still needed
I am trying to delete archive logs older than 7 days in streams environment.
1) we dont have a standby database
2) checkpoint_retention_time = 7
Please help me with this.
Regards,
MikeSQL> set serveroutput on
DECLARE
hScn number := 0;
lScn number := 0;
sScn number;
ascn number;
alog varchar2(1000);
begin
select min(start_scn), min(applied_scn) into sScn, ascn
from dba_capture;
DBMS_OUTPUT.ENABLE(2000);
for cr in (select distinct(a.ckpt_scn)
from system.logmnr_restart_ckpt$ a
where a.ckpt_scn <= ascn and a.valid = 1
and exists (select * from system.logmnr_log$ l
where a.ckpt_scn between l.first_change# and l.next_change#)
order by a.ckpt_scn desc)
loop
if (hScn = 0) then
hScn := cr.ckpt_scn;
else
lScn := cr.ckpt_scn;
exit;
end if;
end loop;
if lScn = 0 then
lScn := sScn;
end if;
dbms_output.put_line('Capture will restart from SCN ' || lScn ||' in the following file:');
for cr in (select name, first_time
from DBA_REGISTERED_ARCHIVED_LOG
where lScn between first_scn and next_scn order by thread#)
loop
dbms_output.put_line(cr.name||' ('||cr.first_time||')');
end loop;
end;
After i ran the above script from metalink i got the below output.
When I have run the above code that is given in metalink to check the minimum archive logs required to restart streams i got the below ouput.
Capture will restart from SCN 55313283790in the following file:
+FLASH/ORCL/archivelog/2011_02_22/thread_1_seq_842.346.443519740 (11-MAR-11)*
+FLASH/ORCL/archivelog/2011_02_22/thread_2_seq_832.189.440690538 (11-MAR-11)*
Does this mean that I will not be able to delete the archive logs from 11-mar-11 ?
Regards,
Mike -
RMAN-08138: WARNING: archived log not deleted - must create more backups
I ran:
1. CROSSCHECK ARCHIVELOG ALL
2. DELETE EXPIRED ARCHIVELOG ALL
I am getting this error. I am trying to free my arciver after an ORA-00257 error.
Can anyone help me out?Basically this error means you are trying to delete archivelogs still needed for recovery (according to your retention policy). Develop a strategy which backs up the archivelogs in regular intervals, after a successful backup delete the archivelogs from disk, for example:
backup archivelog all delete all input;
Werner -
RMAN BACKUPS AND ARCHIVED LOG ISSUES
제품 : RMAN
작성날짜 : 2004-02-17
RMAN BACKUPS AND ARCHIVED LOG ISSUES
=====================================
Scenario #1:
1)RMAN이 모든 archived log들을 삭제할 때 실패하는 경우.
database는 두 개의 archive destination에 archive file을 생성한다.
다음과 같은 스크립트를 수행하여 백업후에 archived redo logfile을 삭제한다.
run {
allocate channel c1 type 'sbt_tape';
backup database;
backup archivelog all delete input;
Archived redo logfile 삭제 유무를 확인하기 위해 CROSSCHECK 수행시 다음과
같은 메시지가 발생함.
RMAN> change archivelog all crosscheck;
RMAN-03022: compiling command: change
RMAN-06158: validation succeeded for archived log
RMAN-08514: archivelog filename=
/oracle/arch/dest2/arcr_1_964.arc recid=19 stamp=368726072
2) 원인분석
이 문제는 에러가 아니다. RMAN은 여러 개의 arhive directory중 하나의
directoy안에 있는 archived file들만 삭제한다. 그래서 나머지 directory안의
archived log file들은 삭제되지 않고 남게 되는 것이다.
3) 해결책
RMAN이 강제로 모든 directory안의 archived log file들을 삭제하게 하기 위해서는
여러 개의 채널을 할당하여 각 채널이 각 archive destination안의 archived file을
백업하고 삭제하도록 해야 한다.
이것은 아래와 같이 구현될 수 있다.
run {
allocate channel t1 type 'sbt_tape';
allocate channel t2 type 'sbt_tape';
backup
archivelog like '/oracle/arch/dest1/%' channel t1 delete input
archivelog like '/oracle/arch/dest2/%' channel t2 delete input;
Scenario #2:
1)RMAN이 archived log를 찾을 수 없어 백업이 실패하는 경우.
이 시나리오에서 database를 incremental backup한다고 가정한다.
이 경우 RMAN은 recover시 archived redo log대신에 incremental backup을 사용할
수 있기 때문에 백업 후 모든 archived redo log를 삭제하기 위해 OS utility를 사용한다.
그러나 다음 번 backup시 다음과 같은 Error를 만나게 된다.
RMAN-6089: archive log NAME not found or out of sync with catalog
2) 원인분석
이 문제는 OS 명령을 사용하여 archived log를 삭제하였을 경우 발생한다. 이때 RMAN은
archived log가 삭제되었다는 것을 알지 못한다. RMAN-6089는 RMAN이 OS 명령에 의해
삭제된 archived log가 여전히 존재하다고 생각하고 백업하려고 시도하였을 때 발생하게 된다.
3) 해결책
가장 쉬운 해결책은 archived log를 백업할 때 DELETE INPUT option을 사용하는 것이다.
예를 들면
run {
allocate channel c1 type 'sbt_tape';
backup archivelog all delete input;
두 번째로 가장 쉬운 해결책은 OS utility를 사용하여 archived log를 삭제한 후에
다음과 같은 명령어를 RMAN prompt상에서 수행하는 것이다.
RMAN>allocate channel for maintenance type disk;
RMAN>change archivelog all crosscheck;
Oracle 8.0:
RMAN> change archivelog '/disk/path/archivelog_name' validate;
Oracle 8i:
RMAN> change archivelog all crosscheck ;
Oracle 9i:
RMAN> crosscheck archivelog all ;
catalog의 COMPATIBLE 파라미터가 8.1.5이하로 설정되어 있으면 RMAN은 찾을 수 없는
모든 archived log의 status를 "DELETED" 로 셋팅한다. 만약에 COMPATIBLE이 8.1.6이상으로
설정되어 있으면 RMAN은 Repository에서 record를 삭제한다.Very strange, I issue following command in RMAN on both primary and standby machine, but it they don't delete the 1_55_758646076.dbf, I find in v$archived_log, this "/home/oracle/app/oracle/dataguard/1_55_758646076.dbf" had already been applied.
RMAN> connect target /
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters are successfully stored
RMAN>
---------------------------------------------------------------------------------- -
WARNING: archive log not deleted as it is still needed
Our Oralce Database is a single node database of version 10.1.0.
Dataguard/Standby is not configured.....we are executing the following command for archivelog backup
run
allocate channel c1 device type sbt;
backup archivelog all delete input;
This script is successfull in backingup all the archvied log files however it is not deleteing the input files. Instead it gives the warning....
"WARNING: archive log not deleted as it is still needed"
What could be the problem?If you do a Metalink seach on "WARNING: archive log not deleted as it is still needed." you'll find a couple of documents that explain the issue.
The short answer is that RMAN has backed up logs which have not yet shipped to standby, so it won't delete them, cause they're still needed till they're successfully shipped to standby.
-Mark -
Background Job - Log Not found (in main memory)
Gents,
I am triggering a background through an RFC using JOB_OPEN,JOB_SUBMIT & JOB_CLOSE
the program associated with the Job is put in to execution immly I don't have any problem
but some Jobs are in Cancelled Status coz the program was terminated due to the Error Message
Log not found ( in main memory ) Message Class - BL Message ID - 207 all the cancelled jobs are
having the same message.
It's pretty sure that this message is not issued by my background program.How to get rid of this
is there any SAP Notes.
Best Regards-Sreeni AnbarasanCheck out if there has been any update error in VA02 using transaction SM13.
Lokesh -
OBIEE 11g : query log not found
Hi,
I am not able to see the query log in 11g answers manage session throwing error query log not found.
I am using obiee 11g. 11g admin client is installed in local machine and I upload the rpd through enterprise manager. But I can not able to open the rpd in online mode that's why cannot change the query log level=2 (as in obiee 10g) for seeing the query log in Answers. Usually after making changes in 11g rpd, I upload that in server via enterprise manager console.
Can anyone please tell me what should be correct option to see the query log and how I can open the rpd in online mode and how I can set the query log level in obiee 11g????
Please help.
Thanks
TitasHi,
Its known bug and it can be done by below methods,
Method1:
If you enabled loglevel for each users wise it may be override with below place also can you confirm both places.
enabled Tools-->Options-->Repository-->
System log level by default will be 0 just try to increase to 2 or 3 and save it.
Method1:
by each report wise enabling loglevel
try putting the below syntax in prefix section of advanced tab.
SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1;
It should generate the log with database sql as well.
Method 3:
Create Session variable(LOGLEVEL) with initblock
in your init block --> datasource place put it like below query
select 3 from IW_POSITION
Note:just point any existing physical table from u r RPD.
Then try to save it and test it.
Refer screen
http://bidevata.wordpress.com/2012/03/03/no-log-found-error-in-obiee-11g/
Thanks
Deva
Edited by: Devarasu on Oct 11, 2012 11:44 PM -
Error in integration Log not found (in main memory)
Hello Experts,
We are facing an error at the moment when we send a contract from CLM to the ERP, we run the transaction BBP_ES_ANALYZE and the error that we got is Log not found (in main memory).
We already reviewed all master data integration, any other suggestions?
Also, this integration was working fine at the beginning, but Basis team applied an update to our ERP system and after this it generates this error.
thanks in advance
Kind RegardsHi,
Can you check the settings as per blog Debugging MA publish to ERP?
Unless the activate log is set, BBP_ES_ANALYSE will not be able to provide much information.
Ashwin -
Update Rules inactive-Log not found in main memory
Hi
I am trying to active update rules but it is failing with log not found in main memory.
I tried update rules syntax check and system says no error when checking the update rules.
What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
Regards
VennelaCheck out if there has been any update error in VA02 using transaction SM13.
Lokesh -
RMAN failure for "archive-log ... not found in controlfile"
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN> connect target sys/XXXX@cldb;
2> connect catalog rman/XXXX@rmandb1;
3>
4> resync catalog;
5>
6> # Backup the database
7> run {
8> allocate channel ch1 type disk;
9> backup incremental level 0 format
10> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_%t_%s_%p' database;
11> sql 'alter system archive log current';
12> }
13>
14> # Backup the archived redo logs
15> run {
16> allocate channel ch1 type disk;
17>
18> backup incremental level 0 format
19> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_%t_%s_%p' archivelog all;
20> sql 'alter system archive log current';
21> }
22>
23> # Backup the control file
24> run {
25> allocate channel ch1 type disk;
26> sql 'alter database backup controlfile to trace';
27> copy current controlfile to
28> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/controlfile.bak';
29> }
30>
31>
RMAN-06005: connected to target database: CLDB (DBID=1292102281)
RMAN-06008: connected to recovery catalog database
RMAN-03022: compiling command: resync
RMAN-03023: executing command: resync
RMAN-08002: starting full resync of recovery catalog
RMAN-08004: full resync complete
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03023: executing command: backup
RMAN-08008: channel ch1: starting incremental level 0 datafile backupset
RMAN-08502: set_count=816 set_stamp=422358010 creation_time=22-FEB-01
RMAN-08010: channel ch1: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00001 name=/opt/orabase/oradata/cldb/system01.dbf
---snip----
more like this
---snip----
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_422358010_816_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:01:46
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter system archive log current
RMAN-03023: executing command: sql
RMAN-08031: released channel: ch1
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03025: performing implicit partial resync of recovery catalog
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03023: executing command: backup
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=817 set_stamp=422358179 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
RMAN-08504: input archivelog thread=1 sequence=85 recid=2610 stamp=422352397
RMAN-08504: input archivelog thread=1 sequence=86 recid=2611 stamp=422352397
----snip----
more similar stuff here
----snip----
RMAN-08504: input archivelog thread=1 sequence=140 recid=2732 stamp=422358121
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_422358179_817_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:00:17
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=818 set_stamp=422358197 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
----snip----
more like this
----snip----
RMAN-08504: input archivelog thread=1 sequence=164 recid=2756 stamp=422358123
RMAN-08504: input archivelog thread=1 sequence=165 recid=2757 stamp=422358123
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAG E STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03006: non-retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19571: archived-log recid 2011 stamp 419161314 not found in controlfile
RMAN-10031: ORA-19571 occurred during call to DBMS_BACKUP_RESTORE.BACKUPARCHIVEDLOG
I added the resync catalog command to the backup. But I am still getting this error. What is happening? I have the control_file_record_keep_time = 14 in the paramater file. Do I need to change this to something greater?
nullThe error message is pointing to an inconsistency between what RMAN "thinks"
should be there and what is in control files.
There are a few things you can try to do
1. Compare V$LOG, V$LOGFILE, etc. Some of these views are based on control files
2. Shutdown and restart the instance.
This may help in synchronizing control files
with internal structures.
3. Trace RMAN session using oradebug and even 10046 to find out what it is doing
4. Dump entire controlfile to trace using
alter session set events 'immediate trace name controlf level 10';
Or dump loghist only
alter session set events 'immediate trace name loghist level 4';
This will dump 2**level entries.
5. Re-create controlfiles with CREATE CONTROLFILE
Regards,
Sev -
Archive log not shipped to standby.
Dear Experts,
We have are using oracle 10.2.0.4.0 on AIX.
And we have configured physical standby database which was working fine till date.
suddenly i found that the MRP process is waiting for gap.
i have all the archive logs on the primary system and all the logs are getting shipped to standby database expect one file.
/oracle/PRD/saparch/PRDarch1_46811_755493268.dbf only this file is not getting shipped to standby database....due to which the standby is waiting for this log.
log applied till 46810
other logs are getting shipped.
However i tried to manually copy this log to standby but it didnt start applying this log.
and i heard that if i copy the log file manually then i need to register it...please let me know how to register it if it is the correct method.
Please help to overcome this issue....
Thanks,
Shankar.
Edited by: Shankar Viji on Jun 19, 2012 10:34 PMShankar Viji wrote:
Dear Mesberg,
Is there any way to over come this bug.
Bug 6851669 - ORA-308 / ORA-27037 from Dataguard GAP resolution [ID 6851669.8]
if not i am planing to take offline backup of my primary and restore it on standby and start the DR again.
Please suggest is that the correct way to do it r not.
Thanks,
Shankar.
Edited by: Shankar Viji on Jun 21, 2012 10:51 PMHi,
It looks for me that archive unable to read, it may be because of any header verification or corrupted blocks.
Now do you have backup of archives ?
If so restore it and retry again.
If not, I suggest you to go with incremental scn for standby instead of recreation whole DR.
Check this link http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/ -
Archive Logs NOT APPLIED but transferred
Hi Gurus,
I have configured Primary & Standby databases in same Oracle Home. OS version is OEL 5. Database version is 10.2.0.1. I could get the archive logs in the standby site but they are not getting applied in the standby database. I don't have OLAP installed in my database version. Would this create this issue? However I attached my primary alert log details below for your reference:
Thu Aug 30 23:55:37 2012
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_target = 289406976
control_files = /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control01.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control02.ctl, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/control03.ctl
db_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim
log_file_name_convert = /home/oracle/oracle/product/10.2.0/db_1/oradata/newstand, /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWSTAND/onlinelog, /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area/NEWPRIM/onlinelog
db_block_size = 8192
compatible = 10.2.0.1.0
log_archive_config = DG_CONFIG=(newprim,newstand)
log_archive_dest_1 = LOCATION=/home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/arch/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=newprim
log_archive_dest_2 = SERVICE=newstand LGWR ASYNC VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=newstand
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable
log_archive_max_processes= 30
log_archive_format = %t_%s_%r.dbf
fal_client = newprim
fal_server = newstand
db_file_multiblock_read_count= 16
db_recovery_file_dest = /home/oracle/oracle/product/10.2.0/db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=newprimXDB)
job_queue_processes = 10
background_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump
user_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump
core_dump_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/cdump
audit_file_dest = /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/adump
db_name = newprim
db_unique_name = newprim
open_cursors = 300
pga_aggregate_target = 95420416
PMON started with pid=2, OS id=28091
PSP0 started with pid=3, OS id=28093
MMAN started with pid=4, OS id=28095
DBW0 started with pid=5, OS id=28097
LGWR started with pid=6, OS id=28100
CKPT started with pid=7, OS id=28102
SMON started with pid=8, OS id=28104
RECO started with pid=9, OS id=28106
CJQ0 started with pid=10, OS id=28108
MMON started with pid=11, OS id=28110
MMNL started with pid=12, OS id=28112
Thu Aug 30 23:55:38 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Thu Aug 30 23:55:38 2012
ALTER DATABASE MOUNT
Thu Aug 30 23:55:42 2012
Setting recovery target incarnation to 2
Thu Aug 30 23:55:43 2012
Successful mount of redo thread 1, with mount id 1090395834
Thu Aug 30 23:55:43 2012
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Aug 30 23:55:43 2012
ALTER DATABASE OPEN
Thu Aug 30 23:55:43 2012
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=28122
ARC1 started with pid=17, OS id=28124
ARC2 started with pid=18, OS id=28126
ARC3 started with pid=19, OS id=28128
ARC4 started with pid=20, OS id=28133
ARC5 started with pid=21, OS id=28135
ARC6 started with pid=22, OS id=28137
ARC7 started with pid=23, OS id=28139
ARC8 started with pid=24, OS id=28141
ARC9 started with pid=25, OS id=28143
ARCa started with pid=26, OS id=28145
ARCb started with pid=27, OS id=28147
ARCc started with pid=28, OS id=28149
ARCd started with pid=29, OS id=28151
ARCe started with pid=30, OS id=28153
ARCf started with pid=31, OS id=28155
ARCg started with pid=32, OS id=28157
ARCh started with pid=33, OS id=28159
ARCi started with pid=34, OS id=28161
ARCj started with pid=35, OS id=28163
ARCk started with pid=36, OS id=28165
ARCl started with pid=37, OS id=28167
ARCm started with pid=38, OS id=28169
ARCn started with pid=39, OS id=28171
ARCo started with pid=40, OS id=28173
ARCp started with pid=41, OS id=28175
ARCq started with pid=42, OS id=28177
ARCr started with pid=43, OS id=28179
ARCs started with pid=44, OS id=28181
Thu Aug 30 23:55:44 2012
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARCt started with pid=45, OS id=28183
LNS1 started with pid=46, OS id=28185
Thu Aug 30 23:55:48 2012
Thread 1 advanced to log sequence 68
Thu Aug 30 23:55:48 2012
ARCo: Becoming the 'no FAL' ARCH
ARCo: Becoming the 'no SRL' ARCH
Thu Aug 30 23:55:48 2012
ARCp: Becoming the heartbeat ARCH
Thu Aug 30 23:55:48 2012
Thread 1 opened at log sequence 68
Current log# 1 seq# 68 mem# 0: /home/oracle/oracle/product/10.2.0/db_1/oradata/newprim/redo01.log
Successful open of redo thread 1
Thu Aug 30 23:55:48 2012
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Thu Aug 30 23:55:48 2012
SMON: enabling cache recovery
Thu Aug 30 23:55:48 2012
Successfully onlined Undo Tablespace 1.
Thu Aug 30 23:55:48 2012
SMON: enabling tx recovery
Thu Aug 30 23:55:49 2012
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=47, OS id=28205
Thu Aug 30 23:55:49 2012
Error 1034 received logging on to the standby
Thu Aug 30 23:55:49 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
ORA-01034: ORACLE not available
FAL[server, ARC1]: Error 1034 creating remote archivelog file 'newstand'
FAL[server, ARC1]: FAL archive failed, see trace file.
Thu Aug 30 23:55:49 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Aug 30 23:55:49 2012
ORACLE Instance newprim - Archival Error. Archiver continuing.
Thu Aug 30 23:55:49 2012
db_recovery_file_dest_size of 2048 MB is 9.77% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Thu Aug 30 23:55:50 2012
Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/newprim/udump/newprim_ora_28120.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Thu Aug 30 23:55:50 2012
Completed: ALTER DATABASE OPEN
Thu Aug 30 23:56:33 2012
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 1-33
DBID 1090398314 branch 792689455
Kindly, guide me please..
-Vimal.CKPT: The trace file details are added below for your reference;
/home/oracle/oracle/product/10.2.0/db_1/admin/newprim/bdump/newprim_arc1_28124.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning and Data Mining options
ORACLE_HOME = /home/oracle/oracle/product/10.2.0/db_1
System name: Linux
Node name: localhost.localdomain
Release: 2.6.18-8.el5PAE
Version: #1 SMP Tue Jun 5 23:39:57 EDT 2007
Machine: i686
Instance name: newprim
Redo thread mounted by this instance: 1
Oracle process number: 17
Unix process pid: 28124, image: [email protected] (ARC1)
*** SERVICE NAME:() 2012-08-30 23:55:48.314
*** SESSION ID:(155.1) 2012-08-30 23:55:48.314
kcrrwkx: nothing to do (start)
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
*** 2012-08-30 23:55:49.723 60679 kcrr.c
Error 1034 received logging on to the standby
Error 1034 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
Error 1034 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'newstand'
ORA-01034: ORACLE not available
*** 2012-08-30 23:55:49.723 58941 kcrr.c
kcrrfail: dest:2 err:1034 force:0 blast:1
kcrrwkx: unknown error:1034
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
ARCH: Connecting to console port...
kcrrwkx: nothing to do (end)
*** 2012-08-31 00:00:43.417
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:05:43.348
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:10:43.280
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:15:43.217
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:20:43.160
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:25:43.092
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:30:43.031
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:35:42.961
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:40:42.890
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:45:42.820
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:50:42.755
kcrrwkx: nothing to do (start)
*** 2012-08-31 00:55:42.686
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:00:42.631
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:05:42.565
kcrrwkx: nothing to do (start)
*** 2012-08-31 01:10:42.496
kcrrwkx: nothing to do (start)
Mahir: Yes I have my 4 standby redo logs!
I created the standby manually without using RMAN.
Hemant: if it asks for even first thread, then obviously it shows nothing is applied on Standby. By the way so it is not called a 'GAP', I think..!
Thanks.
Maybe you are looking for
-
I've lost my photo's off my ipod
I was trying to sync my photo's from my ipod to my laptop, 3000 family photo's from when my children were babies, and they have gone, they are not on my ipod anymore and I can't find them on my laptop, can someone please help, can I get these back???
-
Aperture Web Gallery & .Mac
I wasn't sure if I should post this here or on the .Mac site. I'm not sure where the problem lies. I have four web galleries from Aperture uploaded to my .Mac account. They range from 6 to 15 "screen" pages of content. One of the web galleries has st
-
How to get mininum resources requried by an Tuxedo App
Hi, Is there any other way to get how much resources will be required to run a tuxedo application. I am using tmloadcf -c but can't understand how it is calculated. Can anybody explain? Thanks! Regards, Vijendra
-
OracleResultSet vs. OrclPreparedResultSet
I have an EJB that I've deployed in several other Application Servers. In several methods, when working with CLOBS, I cast the ResultSet to an OracleResultSet to call the method getCLOB() rather than the ResultSet.getClob(). However, with OC4J (Oracl
-
Trying to edit .avi file on imovie.
I got couple .avi file from my digital camera which are some of them are open by imovie but others are not open on imovie but I can see on quick time. Please let me know how can I edit that file on imovie program. Thank you