[SOLVED] dbus error when taking a screenshot
I can't take screenshots with the Gnome3 screenshot program. When I try to save a screenshot, I get this error message:
Error while saving screenshot.
Impossible to save the screenshot to file:///home/some/directory.
Error was GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/bin/nautilus exited with status 1.
Please choose another location and retry.
I found a thread with a similar problem (dbus error when taking a screenshot; the error message is different though) providing a solution, but I can't try that solution because I don't have a /etc/X11/xorg.conf.d/20-intel.conf file.
How can I fix this?
Last edited by cryptkeeper (2012-03-05 08:12:36)
Damn, I found the solution (or better: source) of the problem... The error messages states that /usr/bin/nautilus exits with error something-something, and after thinking about that for some seconds it came to my mind that I replaced /usr/bin/nautilus with a softlink (ln -s) to /usr/bin/thunar because I didn't find a better way to totally replace Nautilus with Thunar...
Thanks for trying to help anyway!
Similar Messages
-
[SOLVED] DBus error when accessing "Windows Network"
I'm getting an error when trying to access "Windows Network" from Nautilus after last Gnome (2.22 -> 2.24) update:
Unable to mount location
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Please tell me if you need me to post any more info/logs.
Thanks in advance
Last edited by DingoMD (2008-10-22 08:07:36)Are those with a problem using share level security on the samba server?
Have you tried accessing the share using smbclient? (smbclient //server/share)
I have been receiving the original dbus error for some time now.
I am using share level security on the server.
Using smbclient results in a segfault. Using nautilus also results in an error from libsmbclient which can be seen in one of the log files.
[mythtv@tvee ~]$ smbclient //sirschmoopy/shared
Enter mythtv's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1]
Server not using user level security and no password supplied.
Segmentation fault
There is a samba bug which looks similar but it only affects people with ipv6 disabled. I have disabled and enabled ipv6 several times and the errors persist.
I think it may be related to this bug: https://bugzilla.samba.org/show_bug.cgi?id=7250
I haven't tried the patch provided yet. -
Dbus error when running systemd-analyze
I recently switched over to systemd, setting it up according to the ArchWiki. However, when I run
systemd-analyze
I always get the following error message:
Traceback (most recent call last):
File "/usr/bin/systemd-analyze", line 307, in <module>
time()
File "/usr/bin/systemd-analyze", line 91, in time
initrd_time, start_time, finish_time = acquire_start_time()
File "/usr/bin/systemd-analyze", line 32, in acquire_start_time
properties = dbus.Interface(bus.get_object('org.freedesktop.systemd1', '/org/freedesktop/systemd1'), 'org.freedesktop.DBus.Properties')
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
follow_name_owner_changes=follow_name_owner_changes)
File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
self._named_service = conn.activate_name_owner(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
self.start_service_by_name(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
'su', (bus_name, flags)))
File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 1
What can I do to fix this? Any help is greatly appreciated.
Edit: grammar.
Last edited by myucht (2012-07-03 02:50:48)The table I get an error on is not partitioned.
I also do not get a exception when I run that procedure manually as system, but when I run it from dba_jobs, I get an insufficient privileges issue. -
ERROR when taking an export using EXPDP
Hi There,
I am receiving the following error when perform the scheduled nightly backup. The strange thing is the production instance has the same setup and it is not having this problem. The following parameters (memory_target, memory_max_target and streams_pool_size) are not being used in the production and non-production database base. They are all set to "0".
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
UDE-04031: operation generated ORACLE error 4031
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
ORA-06512: at "SYS.KUPC$QUE_INT", line 431
ORA-06512: at "SYS.KUPC$QUE_INT", line 1544
ORA-06512: at "SYS.KUPC$QUE_INT", line 576
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3326
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4551
ORA-06512: at line 1
UDE-04031: operation generated ORACLE error 4031
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4373
ORA-06512: at line 1
UDE-31623: operation generated ORACLE error 31623
ORA-31623: a job is not attached to this session via the specified handle
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3326
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4551
ORA-06512: at line 1
Thanks,
JSQL> show parameter MEMORY_MAX_TARGET;
NAME TYPE VALUE
memory_max_target big integer 0
SQL> SHOW PARAMETER SGA
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 768M
sga_target big integer 768M
SQL> SHOW PARAMETER PGA
NAME TYPE VALUE
pga_aggregate_target big integer 256M -
(SOLVED)AWN error when i click in awn-settings
Hi, i recently installed avant-window-navigator and libdesktop-agnostic from AUR and a i get a error when i click in awn-settings.
This is the error:
Traceback (most recent call last):
File "/usr/bin/awn-settings", line 53, in <module>
from awnClass import awnPreferences, awnManager, awnLauncher, awnApplet, awnThemeCustomize, awnTaskManager
File "/usr/share/avant-window-navigator/awn-settings/awnClass.py", line 45, in <module>
from awnSettingsHelper import bind_to_gtk_component
File "/usr/share/avant-window-navigator/awn-settings/awnSettingsHelper.py", line 20, in <module>
from desktopagnostic import config
File "/usr/lib/python2.7/site-packages/desktopagnostic/__init__.py", line 20, in <module>
from desktopagnostic.desktopagnostic import *
ImportError: /usr/lib/python2.7/site-packages/desktopagnostic/desktopagnostic.so: undefined symbol: pydesktopagnostic_functions
I appreciate for your help
thanks
**Sorry for my english**
Last edited by rasertux (2012-08-20 19:34:34)I uninstalled all packs and i install all depends and reinstall the AWN and everything works now.
THX -
[Solved]getting error when trying to launch kate in terminal
i'm wondering why i'm getting this error message when trying to open a file with kate using root in standard terminal
eg su
kate /home/user/document
and i'm getting this error mesage
No protocol specified
kate: cannot connect to X server :0.0
when i try the same method with user account it work perfectl
kate /home/user/document
no error
when i'm trying to open firestarter with root i get this kind message
No protocol specified
(firestarter:7848): Gtk-WARNING **: cannot open display: :0.0
so i try with standard user and i this kind of message
"insufficient privelige u need to be root"
Last edited by burmmo (2008-07-01 21:03:42)You can always use
xhost + localhost
But the real solution lies here... -
[SOLVED] Strange Error When Rebooting
Hello everyone, I'm getting an error when I shut down, and I'm not sure what it means. I copied and pasted the error into Google but didn't find anything. Here is the error in question:
Nov 10 17:47:34 Athena udevd[2715]: '/sbin/blkid -o udev -p /dev/sda2' [2716] exit with status 0xffffffff
Anyone know exactly what this means?
Last edited by jlacroix (2011-11-12 19:34:20)jlacroix wrote:
oboedad55 wrote:
jlacroix wrote:
Hello everyone, I'm getting an error when I shut down, and I'm not sure what it means. I copied and pasted the error into Google but didn't find anything. Here is the error in question:
Nov 10 17:47:34 Athena udevd[2715]: '/sbin/blkid -o udev -p /dev/sda2' [2716] exit with status 0xffffffff
Anyone know exactly what this means?
I had the same thing and posted as well. Here's the reply I got:
https://bbs.archlinux.org/viewtopic.php?id=129938
I don't completely understand that. Did you fix it somehow, or did you conclude that it's not really anything to worry about?
In my case, I started having this problem when I wiped my drive and rebuilt my Arch installation. I don't think I had this problem with my previous install. And in my case, sda2 is my swap partition.
I have the same problem with udisks complaining about my swap partition. It happens after swapoff is called, at the stage when daemons are terminated. As was indicated in the ML thread, this is a udev issue and is pretty harmless. I
guess a solution would be to add a timeout to rc.shutdown between swapoff and kill_all(), but first I would wait for the new initscripts and see whether the problem persists. -
Rman error when taking backup archivelog all delete input
archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
10.2.04
windows
two node rac
please help me with above error
thanks for helpHi;
Duplicate post
Re: rman error when i am doing backup archivelog delete input
Regard
Helios -
How to solve power error when using USB camera adapter in your camera
Hello Everyone,
First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
Things you need:
Camera
USB camera adapter (Ginues Apple product)
Power bank (I'm using 8,400 mAh)
Dual USB Male to 5 Pin Mini USB Y Cable
Ipad
Procedure:
Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
'---------- Power Bank
Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
Then attach the USB2 to the power bank/portable charger to power it up.
your welcomeyocto yotta wrote: How to charge iPad Air when using the camera connection kit?
No can do, Skippy! -
Solved, permission error when creating Flash Clip
My new HP PC is equipped with a device called a personal media drive (K:\). When I tried to and write to this new external drive when creating a Flash clip for the first time, I was unable to do so because I did not have permission. After much searching, I determined that this error is not an Adobe error, but rather a Windows error in Vista. I accessed the drive in explorer, right clicked on it and went to properties. By following the tabs, I was eventually able to enable sharing and grant all permissions to the drive. Once this was done, I was able to successfully render out a .flv file without no diffuculty and withut needing to restart the computer.
Please, all users, when you do eventually solve your problems, do post your results. Forums are such depressing places to visit otherwise. Registration is pretty quick and "paying it forward", is just being a good human.ChojinDSL wrote:
However, when I try to run gitosis-init as the git user I get the following error:
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
What are the permissions of that file? Did you use a restrictive umask while building gitosis-git? -
[Solved] aclocal error when trying to build caja-dropbox
When trying to build caja-dropbox from https://aur.archlinux.org/packages/caja-dropbox/ I get the following error:
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing aclocal-1.14 -I m4
/home/playenball/Downloads/caja-dropbox/src/caja-dropbox-1.8.0/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
Makefile:398: recipe for target 'aclocal.m4' failed
make: *** [aclocal.m4] Error 127
==> ERROR: A failure occurred in build().
Aborting...
I am not sure how to go about fixing this error. I was hoping that some here might be able to help or point me in the right direction.
Thanks.
Edit: I have tried building in a clean chroot and I get the same error.
Last edited by playenball (2015-02-06 06:43:07)clfarron4 wrote:A possible related bug is this, referenced in this thread.
clfarron4: It looks like it could be however the suggested solution in the bug report did not solve the problem.
As I did not want to solve it dirty as Thorsten Reinbold did to build his package I downgraded automake from 1.15 to 1.14 temporarily and built the package with no errors. I then installed the package and all is working properly. I then reupgraded to version 1.15. -
[solved]make error when using svn in PKGBUILD
Hi, all
I want to install the development package of R software using PKGBUILD. My PKGBUILD file is like this:
pkgname=r
_svnmod=r
pkgver=0.0.0
pkgrel=1
pkgdesc="R is a language and environment for statistical computing and graphics"
arch=('i686' 'x86_64')
license=('GPL')
url=('http://www.r-project.org/')
depends=('blas' 'lapack' 'bzip2' 'libpng' 'libjpeg' 'libtiff'
'ncurses' 'pcre' 'readline' 'zlib' 'perl' 'gcc-libs'
'tk' 'libxt' 'libxmu' 'pango')
#makedepends=('subversion' 'openjdk6' 'gcc-fortran')
makedepends=('subversion' 'jre7-openjdk')
options=('!makeflags')
conflicts=('r')
provides=('r')
source=('r::svn+https://svn.r-project.org/R/trunk/')
md5sums=('SKIP')
pkgver() {
cd "$SRCDEST/$_svnmod"
svnversion
build() {
cd "$srcdir/$_svnmod"
./configure --prefix=/usr \
--libdir=/usr/lib \
--datarootdir=/usr/share \
rsharedir=/usr/share/R/ \
rincludedir=/usr/include/R/ \
rdocdir=/usr/share/R/docs/ \
--enable-memory-profiling \
--with-readline \
--with-x \
--with-system-zlib \
--with-system-bzlib \
--with-system-pcre \
--enable-R-shlib \
--with-lapack \
--with-blas \
--without-recommended-packages \
F77=gfortran \
LIBnn=lib
make
package() {
cd "$srcdir/$_svnmod"
make -j1 DESTDIR=${pkgdir} install
# Fixup R wrapper scripts.
sed -i "s|${pkgdir} ||" ${pkgdir}/usr/bin/R
rm ${pkgdir}/usr/lib/R/bin/R
cd ${pkgdir}/usr/lib/R/bin
ln -s ../../../bin/R
But i encounter a make error like this:
ERROR: not an svn checkout
make: *** [svnonly] ERROR 1
Did anyone give me some advices? Thanks a lot!
PS. I was noticed that in wiki page "VCS PKGBUILD Guidelines", "The copy in $srcdir is made using svn export which does not create working copies. Any svn related command has to be used in the local repo in $SRCDEST." So when I change the cd line in build() and package() function into
cd "$SRCDEST/$_svnmod"
the error message vanished. But the local repo are changed when configure and make the project.
Last edited by januslian (2013-05-06 08:50:09)Scimmia wrote:This will be fixed in pacman 4.1.1. For now, just copy the ".svn" dir yourself. cp -r "$SRCDEST/$_svnmod/.svn" "$srcdir/$_svnmod"
Great, it works. Thanks. -
[SOLVED]Git error when trying to push a package to AUR4
Hi,
I'm currently in the process to upload my packages to AUR4.
Package 'overlook-fing' builds and run fine on my system, but when I issue the 'git push' command, I get the following error:
Counting objects: 6, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (6/6), done.
Writing objects: 100% (6/6), 1.91 KiB | 0 bytes/s, done.
Total 6 (delta 0), reused 0 (delta 0)
remote: Traceback (most recent call last):
remote: File "hooks/update", line 241, in <module>
remote: for fname in pkginfo['source']:
remote: KeyError: 'source'
remote: error: hook declined to update refs/heads/master
To [email protected]:/overlook-fing.git
! [remote rejected] master -> master (hook declined)
error: failed to push some refs to '[email protected]:/overlook-fing.git'
I don't understand what is this 'source' error as it was running fine until now.
Could someone explain where is my mistake. Here is the PKGBUILD :
# Contributor: Piotr Rogoża <rogoza dot piotr at gmail dot com>
# Created: 08/12/2010
# Maintainer: Salan54 <salan at fremenil dot com>
# Modified: 05/16/2013
pkgname=overlook-fing
pkgver=2.2
pkgrel=3
_altpkgname=fing
pkgdesc='The ultimate tool for network discovery and scanning'
arch=('i686' 'x86_64')
url='http://www.overlooksoft.com/'
license=('custom:Overlook Freeware license')
depends=('boost-libs' 'openssl' 'zlib')
options=(!strip)
case $CARCH in
i686)
source=("${pkgname}-${pkgver}.tgz::http://www.overlooksoft.com/packages/linux32/${pkgname}-${pkgver}.tgz"
"fingbox-sentinel.service"
"fingbox-sentinel.script"
md5sums=('fa523c841daa6963fda51a32b5972bcd' '013488a7afe3048524df6b7527faae69' '95dbef149b9d3a9ea3bac0bd0c77b343')
x86_64)
source=("${pkgname}-${pkgver}.tgz::http://www.overlooksoft.com/packages/linux64/${pkgname}-${pkgver}.tgz"
"fingbox-sentinel.service"
"fingbox-sentinel.script"
md5sums=('3e599f665442631657ebc8bef74d98e1' '013488a7afe3048524df6b7527faae69' '95dbef149b9d3a9ea3bac0bd0c77b343')
esac
package() {
cd "$srcdir"
cp -r usr $pkgdir/
install -dm755 "${pkgdir}"/etc/${_altpkgname}
install -dm755 "${pkgdir}"/var/data/${_altpkgname}/{box,sentinel}
install -dm755 "${pkgdir}"/var/log/${_altpkgname}
install -Dm644 ./usr/share/${_altpkgname}/template/conf/sentinel.txt "${pkgdir}"/var/data/${_altpkgname}/sentinel/
install -Dm644 ./usr/share/${_altpkgname}/template/conf/*.properties "${pkgdir}"/etc/${_altpkgname}/
# systemd & fingbox-sentinel
install -Dm755 fingbox-sentinel.service "${pkgdir}"/usr/lib/systemd/system/fingbox-sentinel.service
install -Dm755 fingbox-sentinel.script "${pkgdir}"/usr/lib/systemd/scripts/fingbox-sentinel
# license
install -dm755 "${pkgdir}"/usr/share/licenses/${_altpkgname}
ln -s /usr/share/${_altpkgname}/doc/license.txt "${pkgdir}"/usr/share/licenses/${_altpkgname}/license
# vim:set ts=2 sw=2 et ft=sh tw=100:
Thanks for your answers.
Salan
Last edited by Salan54 (2015-06-08 14:56:39)Try updating the PKGBUILD to use modern architecture-specific source arrays instead of bash conditionals.
man PKGBUILD | less -p "source \(array\)" -
[SOLVED] Pacman error when installing Arch from installation cd
Hey I''ve been checking the wiki, forum and even google and I've found some responses but they don't seem to apply to my problem and I just need a little help.
I'm at the 4th step "Select Packages" and when I select it I get "Pacman preparation failed! Check /dev/tty7 for errors"
the error on tty7 is "pacman: error while loading shared libraries: /usr/lib/libalpm.so.4: cannot read file data: Input/output error"
I apologize if this is an easy fix but its been almost a year since I've used arch and I'm a bit spoiled with ubuntu.
****The cd was outdated. Burning a new copy fixed it*****
Last edited by Rabbit (2012-01-03 01:40:33)I'm afraid it might be too old. I'm going to try to burn a new copy tomorrow when I can borrow a friends computer. I just wanted to make sure I wasn't missing something real simple before I gave up.
-
[solved] Permission Error when trying to run gitosis-init
Im trying to install a git repository using gitosis, as described in the Arch Wiki:
https://wiki.archlinux.org/index.php/Gitosis
However, when I try to run gitosis-init as the git user I get the following error:
sh-4.2$ gitosis-init < /srv/id_dsa.pub
Traceback (most recent call last):
File "/usr/bin/gitosis-init", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2691, in <module>
add_activation_listener(lambda dist: dist.activate())
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 668, in subscribe
callback(dist)
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2691, in <lambda>
add_activation_listener(lambda dist: dist.activate())
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2192, in activate
self.insert_on(path)
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2299, in insert_on
self.check_version_conflict()
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2338, in check_version_conflict
for modname in self._get_metadata('top_level.txt'):
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2186, in _get_metadata
for line in self.get_metadata_lines(name):
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1174, in get_metadata_lines
return yield_lines(self.get_metadata(name))
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1166, in get_metadata
return self._get(self._fn(self.egg_info,name))
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1281, in _get
stream = open(path, 'rb')
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
It works if I run gitosis-init as root. But I'd rather avoid that.
Any ideas on how I could fix this?
Last edited by ChojinDSL (2011-03-16 12:29:54)ChojinDSL wrote:
However, when I try to run gitosis-init as the git user I get the following error:
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
What are the permissions of that file? Did you use a restrictive umask while building gitosis-git?
Maybe you are looking for
-
HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as us
-
Airport Express Can't be Found
I use two airport expresses to stream music to two separate rooms. Last week they both disappeared (They were no longer showing up as options in iTunes). The green lights were still on, but could not be found using the airport utility. I hard reset b
-
How to unpin default apps from the Start Screen using vbscript
Hi, I am looking for a way to programmatically unpin apps using vbscript from the Windows 8 Start Screen. I need to unpin SkyDrive, People, Calendar and messaging. I have been searching for a couple of days but I'm coming up with nothing so far. I kn
-
Please help me figure out how to fix this situation, whether I can reset it or whether I need it serviced. I tried the center and menu buttons, and again, it just kept rebooting itself. I stopped upgrading iTunes at 10.3.1, so please don't suggest t
-
We are having following error on our VGW Dec 12 11:22:49 10.192.10.239 1923: 001029: Dec 12 11:24:47.240: %IVR-6-APP_INFO: TCL CVP ringtone.tcl: ******* Ringtone Zombie timer expired- call cleared ******* CallID = CAD58CA5.622C11E3.A5D9CEE3.83D4A68B