Rman recovery after DBID has been changed

Hi. I am on 10.2.0.3.
On one of my databases dbid was changed using NID. Is there any way to recover or duplicate the database using rman backup made PRIOR to the dbid change? TIA!

If you restore a backup done with the old DBID, your restored database would have the old DBID. It would be "different" from the current database.
You wouldn't be able to use a backup done with the old DBID to do a "DUPLICATE DATABASE" -- you'd have to create a fresh backup of the database using the current DBID to DUPLICATE (which means that it can't be "duplicated" to a point in time in the past !).
Your best bet would be to RESTORE an older backup. But you can't "apply" archivelogs of the new DBID to that restored database.

Similar Messages

Credit Memo-Reb.Req.f.Man.Accrls not created after Rebate has been changed

I am currently working on a report that calls transaction VBO2. However, when I run the report using BDC foreground (to check the screens and values), rebate agreement was not accrued and was not saved. Thus, no credit memo was created. When I tried doing a recording in SHDB, the credit memo was not also created. But when I tried processing the rebate agreement in VBO2 directly, I was able to save the agreement changes and a credit memo was automatically created by the system. Have you encountered this issue already? You cannot save your changes during recordings but when you access directly the transaction, your changes are saved. Let me know your thoughts on this. Thanks!

Hi,
Maintain reason for rejection for that credit memo,then it won't show as open.
Ram

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

HT5167 Error after 10.7.4 upgrade..."computer's local hostname ........is already in use on this network. The name has been changed to...... What to do now to get it back to status before 10.7.4 upgrade?

Error after 10.7.4 Lion Upgrade to iMac
Computer's local host name .......is already in use on this network. the name has been changed to........
and it keeps adding up the number each time I wake the iMac.
What to do to get it back before upgrade error?

Ok worth repeating, hope this works. Finally spoke to AppleCare Support and walked me thru following...restart computer holding down "command" and "option" keys at the same time with letters "P" and "R" when computer turns on. This is what he called a PR restart, clears out discrepancies in memory (if that is what the error message actually is). Then went to Systems Preferences/Network/Sharing and deleted the number that kept increasing every time MAC would wake up.
Even tho this was just done, I am hopeful that error pop-up won't happen again. Fingers crossed!

After installing new operating system software, my user account name has been changed and i don't know the password.

i need help!
I just installed Mac OS Maverick in my laptop, but when i checked the Users&Groups There are only 2 User name 1 is "Apple(admin) and 2 is Guest, my user account name has been changed even the password. how can i retrieve my old user account name and password or how can i changed it?

Here's an updated set of instructions you can try:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

How to find out if a transportation/accomodation request has been changed?

Hello all,
I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
find any field or table that lets me know there has been a change.
I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
Can you please help me with this topic? I don't know how to solve it.
Thank you very much in advance.
Best regards.

Hi,
you can use trace event ST01 or using SAP standard workflow.
as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
hope it helps.
thanks.

How to settle the expenses after AUC has been capitalised.

Hi All,
I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
Can you tell me how to create a new settlement rule in this case. It is Urgent
Regards
VK

Hi Vijay,
This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
You can then settle using CJ8G or CJ88 but CJ88 is a better option.
I think, I have answered the same query.
Regards
Bharat

Any existing function to validate an item when other item has been changed?

Any existing function to validate an item when another item has been changed? Because these 2 fields are related. When one filed is changed, the other one should be blank and let the user to input again. I am using oracle custom.pll library.
Any ideas?
Amy

Hi Vikram,
Thanks for posting your issue,
You can switch of alerts and set E-Mail Notification to Yes under your Workflow Tasks list > Settings > Advanced Settings. By doing so user specified in AssignedTo will receive e-mail notification when task is created and if task ownership is not changed
during your workflow this will be the only mail sent by system.
Since you are already using SharePoint designer you also have option to include Send an Email action in your workflow (after task is created). This option is better if you want to send some specific info to user.
Also, browse the below mentioned URLs to create workflow step by step
http://sharepointsolutions.com/sharepoint-help/blog/2010/03/create-a-detailed-custom-task-notification-with-a-sharepoint-designer-workflow/
http://sharepoint-community.net/forum/topics/configure-email-notification-for-discussion-board-activity
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

RSA1 error Logical system name has been changed for this system

Hello All,
Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
But now when we login to client 500 and execute RSA1 it is showing
Logical system name has been changed for this system"
In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
If you really want to change the logical name, than you can, if and when you:
change the system name back to SIDCLNT300,
delete all existing connections between this system and other systems,
delete all transfer structures that still exist, and
do not use ALE or Workflow.
Guys do you know how to fix this ? .
Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
Edited by: Sahad K on Mar 17, 2008 10:55 AM

Hello Hari,
Both the options you said cannot be used
since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500. Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
I found out the issue. In the table RSBASIDOC the logical system name that can use rsa1( bw client )is set as SIDCLNT300). Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
The solution is specified in /message/3284842#3284842 [original link is broken]
Let me try the solution 2 and inform you.
Solution 2:
You cannot delete the source system. Two cases have to be distinguished:
The source system still exists.
Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
The entry exists but a remote login is not possible. Correct the communication parameters.
Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
The source system no longer exists or was replaced with another source system with the same IP address.
Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
Incase you have any idea other than this please let me know how to edit the RSBASIDOC table and change the entry to client 500.
Edited by: Sahad K on Mar 18, 2008 5:07 AM

Message regarding Metadata for this photo has been changed

We recently transferred from PC to Mac. We now get, over each image, an icon that when you hover over it the message says, "The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?" What should our action be please?

Normally, that message indicates that another program has changed the photo's metadata on disk after it was imported into the LR catalog. But sometimes LR generates that message spuriously, i.e. it's a false alarm. In this case, I think it is likely a false alarm, and you should choose Overwrite Settings. However, before you do so, make sure you have a good backup of your catalog, just in case. See Lightroom Help | Back up a catalog for how to make a manual backup of your catalog when LR exits.

My AOL login for iTunes has been changed to an inaccessible e-mail address

I was using my AOL account for iTunes (lets call it [email protected]) but as of April 1st it no longer works. Previously I would login with SCREENNAME + my password, now it's saying my ID has been changed to [email protected] I don't have an AIM account because I had AOL and could access AIM (AOL Instant Messenger) by logging in to my AOL account. Now when I attempt to login it says it's been changed to [email protected], but when I try to access it the old password doesn't work. When attempting a password recovery Apple sends the e-mail to [email protected] instead of [email protected] How do I change this?
Also none of the above is my Apple ID, let's say it's [email protected] When I login to iTunes with [email protected] it shows that I have no App purchases.

3 days later and I finally get a response. The response was basically writing what my question was in a statement then asking if that solved my problem. I am absolutely disgusted by not only the delay in response but the complete lack of attempting to read what my problem is, my iTunes customer support agent simply copied and pasted the information listed here: AOL Usernames can no longer be used with the iTunes Store - Apple Support.
OH, and the issue of apps trying to update themselves is back again for no apparent reason.

Error saying "Metadata has been changed externally"

I recently added an external hard drive and am now saving my new pictures to that hard drive. Lightroom still lives on my hard drive. I imported some pictures into LR last night and several of them have an arrow icon on them and the error message says "Metadata has been changed externally" but it hasn't. These are DNG files that have not been opened anywhere other than LR. I did synchronize the settings of these pictures, but all within LR. Please help!

Yes, this is a longstanding "feature" of Lr. You know the saying: when bugs exist long enough they become a feature.
It disappears when you uncheck the box <Automatically write changes to xmp>. You still can save to xmp when the box is unchecked but you have to do it manually (select all the images in the Grid View and press Ctrl / Cmd + S).
Another procedure that makes the message disappear (when you leave the box <Automatically write changes to xmp> checked) is to do the <Save metadata to file> (via >Metadata >Save metadata to file - Cmd / Ctrl + S) and immediately do a <Read metadata from file>. You have to do this immediatly after saving to file because the <Read metadata from file> overwrites the catalog data, so you first have to save the catalog settings to file (save metadata to file) and immediately read them back.
The message in itself is not harmful. It says that the "Metadata has been changed externally" but you have to read this "externally" as: metadata has been changed in a different instance of Lr. This seems to be strange. But sometimes Lr has no "memory" of saving the metadata to file because this step has been obliterated in the history panel (by going back to a previous step in the history) and thus this <saving metadata to file>-step is not in the catalog. In this situation Lr "concludes" that the metadata in the file must have been changed externally by a different program.
the message has driven numerous Lr users crazy. But rest assured, your images are safe and sound. And you rmetadata are saved to file.

Should I ok "this computer's local hostname Irma-Mac-mini-local" is already in use on this network. The name has been changed to Irma2 Mac-mini 2-local

Should I ok this message-this computer's local hostname Irma's Mac-mini-local is already in use on this network. The name has been changed to Irma's Mac-mini-2local

Don't think this is a conflict with IP Addresses or computer names
= DHCP hangover when computer renews DHCP lease
There is no actual other computer
It just appears that way when reconnects so creates new -2 computer name
What types of names do you use your computers ?
Whether you name them after quantum particles or the romantic poets...
They will each start to be appended with "-2" then "-3" etc if you auto configure network settings from Airport Router DHCP service and you have this Change computer name issue where pop up window states name is already being used on your LAN
As stated previous post you can reset the computer name in SysPrefs / Sharing / Edit button
And restart Router or renew all DHCP leases (if persists in not allowing original name)
Can now press Edit and reset name of choice
But for Fix see link above

Rman recovery after DBID has been changed

Similar Messages

Maybe you are looking for