RMI concurrent processing of requests

I have an RMI application which takes say 5 minutes to process a request from a client. Now if five clients concurrently access the server, the server process all the five requests within 5 minutes. This is perfectly fine. I'm using Sun jdk on my laptop.
But when I use IBM jdk (because I've to run the server ulitmately on an AS400 system with IBM jdk) - in the case of one client, it is taking 5 minutes. But when I have five clients, each one is taking around 25 minutes.
Is this becuase of any limitation with the IBM implementation? Is there any parameter I can set to overcome this issue?
Thanks in advance.

You'd have to ask IBM. Their implementation has a different threading model.

Similar Messages

Concurrent Manager not processing the requests

Dear friends,
We are facing a serious issue with our production instance since morning.
The concurrent managers are not processing the requests. As its month closing, a lot of requests are being piled up in the Standard Manager's queue.
The Standard Manager is up. We have verified that by the processes at OS and Concurrent Manager Administer form as well.
The Conc Manager Admin form shows:
Actual process: 50
Target Process 50:
Running Requests: 50
Pending Requests: 304
However, when we check from Concurrent Requests form by selecting Status=Normal, Phase=Running, its showing only 6 requests as running and rest all in pending phase.
These requests are running for long and no other requests seem to being picked up by the CM.
an urgent help is required as its production environment and all the users are complaining.
Thanks.

Its R12.1.1 Apps with 11.1.0.7 DB
We have found the issue. In the Concurrent Manager Administer form, when we clicked on the Requests Button, it shows a lot of the following requests:
Check Event Alert - ALECTC
This request is not shown in Concurrent Requests form.
We found that the Alert mails were not being sent. At OS level, we found 50 ALECTC OS processes were running.
We killed those and immediately Standard Manager started picking up the pending requests.
I am not yet sure of ALECTC processes. Can someone explain ???
Thanks.

No concurrent manager is defined to process this request,so it can't be pro

Hello Friends
I am facing a serious problem in my production server. After Stop/Start my application I have to run cmclean.sql to active "Output Post Processing" concurrent manager.
I have find out that when I down my application FNDLIBR does not down properly. I have put sleep time 10 minutes and I also wait 5 hours to check is it down or not but After 5 hours the process still running. To down the process I have to execute kill -9 <process id>.
Please see the below Diagnostic message or Shutdown concurrent manger.
No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules.
This request may have to wait on one or more of the following requests to complete before it can begin execution:
Application Version - 12.0.6
OS - Redhat Linux (x86)
Thanks
Makshud

Hi,
No concurrent manager is defined to process this request, so it cannot be processed. See if (Note: 342932.1 - No Concurrent Manager is Defined to Process This Request on Shutdown of Managers) helps.
Regards,
Hussein

Con. Req. 'Receiving Transaction Manager' Inactive/No Manager : This request is an unconstrained request. (queue_method_code = I) , No concurrent manager is defined to process this request, so it cannot be processed.

Hi Gurus,
I need your help on a concurrent request ( Receiving Transaction Manager ) showing as Inactive/No Manager.
EBS: R12.1.2 on Linux
Database: 11.2.0.3 on HP UX Itanium
A user is submitting the concurrent request - "Receiving Transaction Manager" (It is a concurrent program not a concurrent manager). The request ends up as Inactive/No Manager. When I click on the diagnostics button this is what it shows -
"No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules."
I ran analyzereq.sql and the analysis is
Analysis:
Request 1427025 is in phase "Pending" with status " Normal".
                           (phase_code = P)   (status_code = I)
This request is an unconstrained request. (queue_method_code = I)
It is in a "Pending/Normal" status, ready
to be run by the next available manager.
Checking managers available to run this request...
There is no manager defined that can run this request
This should show on the form as Inactive/No Manager
Check the specialization rules for each
manager to make sure they are defined correctly.
Additional information (from apps.FND_CONC.DIAGNOSE):
No concurrent manager is defined to process this request, so it cannot be processed.
Contact your system administrator to define a concurrent manager to process this request or to verify that existing concurrent managers have the correct specialization rules.
I ran another SQL to find out which manager runs the program :
select CONTROLLING_MANAGER,request_id
from fnd_concurrent_requests
where request_id=1427025;
It returned blank (or) NULL for controlling Manager.
select b.USER_CONCURRENT_QUEUE_NAME from fnd_concurrent_processes a,
fnd_concurrent_queues_vl b, fnd_concurrent_requests c
where a.CONCURRENT_QUEUE_ID = b.CONCURRENT_QUEUE_ID
and    a.CONCURRENT_PROCESS_ID = c.controlling_manager
and    c.request_id = 1427025;
Returned Nothing.
I thought that for a concurrent program when no specific manager is defined, Standard Manager is the default. Is my understanding wrong ?? Have anyone of you faced this issue? How did you fix it ?
I did check the profile - Concurrent: Conflict Domain for the responsibility and it is blank.
Appreciate any help.
Thanks
Cherrish Vaidiyan

Was this working before? If yes, any changes been done recently?
Your understanding is correct, unless this concurrent program is excluded from being processed by standard manager.
If the request was not processed then the no rows output is an expected behavior -- (Doc ID 344011.1)
Have you tried the solution in (Doc ID 1303315.1)?
Thanks,
Hussein

COncurrent process fails with warning for OPP

Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?

Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi

Post-processing of request failed

Hi
Getting following error when I submit XML Publisher PDF report.
------------- 1) PUBLISH -------------
Beginning post-processing of request 265191 on node EORAAPD10 at 14-APR-2006 20:51:43.
Post-processing of request 265191 failed at 14-APR-2006 20:51:45 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Post Processor Log file:
Log file has the following error
[UNEXPECTED] [50985:RT79177] java.sql.SQLException: Non
supported SQL92 token at position: 1:
We are on XML Publisher 5.5 and EBS 11.5.10 CU2.
Any help will be greatly appreciated.
Thanks

Suddenly I am getting this warning for a XML Publisher based Report.
Concurrent program Log
------------- 1) PUBLISH -------------
Beginning post-processing of request 610188 on node GCDSINGGN7HRO01 at 07-SEP-2010 10:39:47.
Post-processing of request 610188 failed at 07-SEP-2010 10:39:48 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Concurrent Manager Log (OutProcessor Log)
[9/6/10 6:29:36 PM] [OPPServiceThread1] Post-processing request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Executing post-processing actions for request 610188 .
[9/6/10 6:29:36 PM] [32829:RT610012] Starting XML Publisher post-processing action.
[9/6/10 6:29:36 PM] [32829:RT610012]
Template code: XXPLG_PMS_APPRAISAL_RATING_MGR_TEMP
Template app: XXPLG
Language: en
Territory: US
Output type: EXCEL
[9/6/10 6:29:37 PM] [32829:RT610012] Output file was found but is zero sized - Deleted
[9/6/10 6:29:37 PM] [UNEXPECTED] [32829:RT610012] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Others this type of report are working fine. Kindly helo on this

Portal Runtime Error : An exception occurred while processing a request

Hello friends,
After upgradation of my portal to the following patch level, SAP J2EE 6.20:
Portal Version : EP 6 SP 2 patch 29 hotfix 0
Content Mgmt and Collaboration version : 6 SP2 patch 5
i faced many performance related issues. Portal seems to be very slow. After logging in, most of the time I get 2 errors:
Either
1> Iview remains blank.
Or
2> Portal Runtime Error : An exception occurred while processing a request. Portal Runtime exception occured. Please check the System Log.
But when I refresh that particular iview, it works fine.
I went through the portal.log file (/usr/sap/PEP6/j2ee/j2ee_00/cluster/server/managers/log/portal/logs). And found the root cause of most of the exceptions as "com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found."Aug 18, 2005 6:07:42 PM # PRT-Async 2 Fatal Exception ID:06:07_18/08/05_0669
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/ACCContent/ACCContent.Roles/Company/R.Employee/W.MyWork/P.MyWork.DesktopTools/I.Contacts
Component class : com.sapportals.portal.prt.pom.RootComponentNode
User : tempuser
 at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:853)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:311)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:153)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found.
 at com.inqmy.services.servlets_jsp.server.ServletContextFacade.loadServletLocal(ServletContextFacade.java:3660)
 at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:81)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.include(RequestDispatcherImpl.java:384)
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:144)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Help needed.(as i am helpless now.)
Regards,
Nilz

Anthony,
I had check it. It was correct. But the thing when I saw in the component Inspector of portal, my iview did not appear.
I created like this
 project-> rightclick-> export-> par ->selecting project-> givint protal password-> and finish.
The NW didn't give any error, but the par file didn't appear in the portal componet Inspect.
but the par file is created in the NW studio Navigation bar.
Let me know any help regarding this
thanks
venkat

How to process a request ?

Hi all,
I am new to Oracle Financials..
How to process a request ?
i am trying to view a report or do posting where the application generates a request ID and says waiting for concurrent manager approval. how to process the request and get it approved. I am using vis demo. Any help will be highly appreciated. Thanx in advance.
Prasadh

Hai,
You said you wanted to know how to process request.right.
When ever Oracle application generates a request if you want to know the status of the request..
Go to the menu bar of the form ..
view
|___requests
Then a query form opens asking you which request if you know the no of the request, query it with the no..or just click on the find button ...it would show you all the requests processed by you.
The requests have three stages
1.Pending--standby stage
2.Normal-stage
3.completed stage---under this completed stage u may have
I.completed normal
II.Completed error
to make a particular request processed from one stage to another put the cursor on to that particular request and press refresh data..button.or Ctr+R from the keyboard..
Your request will get processed...do this untill u get the last stage of the request.
Hope I have solved ur problem if any thing else is there do ask.
Bye,
Sushma

High Load on Concurrent Processing node

Hello :
version :11.5.10.CU2 / Linux -86
Recently I have started to notice that my concurrent processing node is loaded heavily between 3.00 AM to 6.00 AM and the load is normal. I need to find out the root cause of this spike. Is there a log that I can look for in concurrent processing node that will give me a clue.
Regards,
Bala

Look at the longest running requests during that time, then enable sql trace so you can start to tune them, or work with Oracle Support if they are standard programs running with suboptimal execution plans.
SELECT CR.REQUEST_ID "Request", U.USER_NAME "User", CP.USER_CONCURRENT_PROGRAM_NAME "Program",
TO_CHAR(CR.REQUESTED_START_DATE,'DD-MON-YY HH24:MI:SS') "Requested Start",
TO_CHAR(CR.ACTUAL_START_DATE,'DD-MON-YY HH24:MI:SS') "Actual Start",
ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60*60,0) "Duration (sec)",
ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60,2) "Duration (min)",
CR.PHASE_CODE "Phase", CR.STATUS_CODE "Status", CR.ARGUMENT_TEXT "Arguments"
FROM FND_CONCURRENT_REQUESTS CR,
FND_USER U,
FND_CONCURRENT_PROGRAMS_TL CP,
FND_RESPONSIBILITY_TL R
WHERE CR.REQUESTED_BY = U.USER_ID
AND CR.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND CR.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND CP.LANGUAGE='US'
AND CR.RESPONSIBILITY_APPLICATION_ID = R.APPLICATION_ID
AND CR.RESPONSIBILITY_ID = R.RESPONSIBILITY_ID AND R.LANGUAGE='US'
AND (TO_CHAR(CR.ACTUAL_START_DATE,'DD-MON-YYYY HH24:MI') BETWEEN '30-JUN-2011 03:00' and '30-JUN-2011 06:00')
ORDER BY ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60*60,0) DESC

Better utilization of cpus and memory - Concurrent processing tier

I have a three node 11.5.10.2 setup:
Node1 - Database only (10.1.0.5)
Node2 - Admin, Forms, Web
Node3 - Concurrent processing
My concurrent processing node has lot of free cpus and memory
Cpus: Average utilization 20%
Memory : Average utilization 15%
The highest spikes I've had are:
Cpus- 24% utilization
Memory - 20% utilization
What I can do on the concurrent processing tier that would make better use of the cpus/memory resources and improve performance?
I have 2 dual core Intel(R) Xeon(R) processors and 16 GB Physical memory on the concurrent processing server.
Thanks & regards,

Hi Asif,
You are seeing a manifestation of the old myth from the earlier part of this decade that you need many middle tier servers to effectively interact with users in a busy ERP environment. In reality, the middle tier processes which are normally web, forms, and concurrent managers typically consume only memory, and maybe10-20 percent CPU utilization of a modern quad core Xeon/Opteron Linux server. I have seen several 200 plus user single node 11i installations that handled the load just fine. In my experience, 95-97% of the ERP CPU utilization comes from database sessions, not from middle tier processes. Occasionally, a forms session goes to a runaway, or a ar60run process runs at 100% CPU while the request is running, but if you follow the Oracle recommendations of limiting fnd_concurrent_requests to 50k rows or less, you will not see much CPU utilization from FNDLIBR processes.
Most 32 GB 2 socket quad core servers can support 200 plus forms user connections plus host the concurrent manager as well. I would only add additional web/forms nodes after you start paging on the middle tier box. Having concurrent managers separated on a 10-20 percent utilized server is sort of a waste of a server.
Regards,
-Michael

Error Occured while processing a Request-openning a another coldfusion page from old page link

in one page there is dynamic link in that i want to open anather page...
code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
Error Diagnostic Information
An error has occurred.
HTTP/1.0 404 Object Not Found
this error shows please help me...
i am new in coldfusion.
Thanks.

Hi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia

The message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." is displyed when I try to log on to my internet banking. Please can you tell me why?

Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)

See here > http://support.apple.com/kb/HT1527
From Here > http://support.apple.com/kb/TS1368
More info here > http://www.apple.com/support/itunes/downloading/

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

An error has occurred: "Failed to process the request."

I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
 common:service:http;service:servlet_jsp
 service:ejb
 common:service:iiop;service:naming;service:p4;service:ts
 service:jmsconnector
 library:jsse
 library:servlet
 common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
 library:ejb20
 library:j2eeca
 library:jms
 library:opensql
 common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
 interface:resourcecontext_api
 interface:webservices
 interface:ejbserialization
 sap.com/tcwddispwda
 sap.com/tcwdcorecomp
 service:webdynpro
 service:sld
 library:tcddicddicservices
 library:com.sap.aii.proxy.framework
 library:tcgraphicsigs
 library:com.sap.mw.jco
 library:com.sap.lcr.api.cimclient
 library:sapxmltoolkit
 library:com.sap.aii.util.rb
 library:com.sap.util.monitor.jarm
 library:tcddicddicruntime
 library:com.sap.aii.util.xml
 library:tccolapi
 library:com.sap.aii.util.misc
 library:tc~cmi
 library:tccolruntime
Resources:
 C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
 at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
 at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
Tokio

Hi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB) ?
Thanks for your help...
Tokio

Error when processing your request

Error when processing your request
What has happened?
The URL http://vinay:8000/sap/bc/webdynpro/sap/zfirst_web was not called due to an error.
Note
     The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (vinay statt vinay.).
     The error occurred on the application server vinay_NSP_00 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system NSP in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server vinay_NSP_00 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server vinay_NSP_00 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: BCUSER -l: E -s: NSP -i: vinay_NSP_00 -w: 0 -d: 20090622 -t: 074756 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Thomas,
I realize this is a rather old discussion, but I wonder if you know whether running transaction SGEN to generate the loads for either all web dynpros or just a particular transport containing a custom web dynpro would resolve the slow response time and timeout. After a customer message with SAP, this was their suggestion, however our Basis team is skeptical that this will have the desired effect. We noticed the issue when moving from development to QA so we won't know if this is the solution until we try it in production upon go-live.
Cheers,
Amy

RMI concurrent processing of requests

Similar Messages

Maybe you are looking for