Roland UM-ONE CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

UM-ONE
Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
No power ready light shows when connecting UM-ONE.
System Profile shows it there, but not configured.
With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

Similar Messages

System profiler recognizes ipod but not in finder or itunes

My ipod is recognized on system profiles but it does not appear on finder or itunes! what do i do?HELP!

Josie20 wrote:
nothing happens when i reset it and the computer doesn't see it!
Ummm...earlier you said System Profiler saw it. Did/does it look like this or something different:
iPod:
Capacity: 495.62 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk3
Version: 10.01
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple
OS9 Drivers: No
Product ID: 0x1300
Serial Number:
S.M.A.R.T. status: Not Supported
Vendor ID: 0x05ac (Apple Computer, Inc.)
Volumes:
WALKINGSHUF:
Capacity: 495.59 MB
Available: 239.25 MB
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk3s1
Mount Point: /Volumes/WALKINGSHUF
<Edited by Moderator>

In my ipad when connecting the facetime ring is going on but not connected, in my ipad when connecting the facetime ring is going on but not connected

in my ipad when connecting facetime ring is going on but i couldnot get connection today

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

One of my movies I bought shows up on my mac in the itunes library but not on the apple tv.

I own about 30 movies on my apple tv and one of my movies I bought shows up on my mac in the itunes library but not on the apple tv. How do I fix this issue and get it to show up on my apple tv?

Two things to check
1st
Settings
Mail, Contacts, Calendars
AccountsHow many accounts are there?
2nd
From Home screen press Mail app
Press the top left button (next to Inbox)
You'll see all the Inboxes for the accounts present
You'll know either way whether one or more accounts has been setup.
SIDE NOTE: Not too sure about MobileMe though, might be integrated with iCloud, not sure.

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

System Profiler Crashes Lacie ext not mounting

Sometime after updating to 10.4.9, I noticed my external Lacie firewire is not mounting. I have disconnected/reconnected Lacie HD. I have ran Permissions from direct CD, reset PRAM, HD not visual in DiskUtility, Diskwarrior, or System Profiler. When I launch System Profiler and check fireware, SP crashes. The report reads:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
I have not moved Apple apps around. SP is able to run other checks just not firewire. How can check my fireware connections?
Carlos
G4 MDD Mac OS X (10.4.9)

Thanks for the input.

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

Does System Profile show PCI-X

I have a
Apple Power Macintosh G5 2.0 DP (PCI-X) with an
Atto UL4D Ultra (320MB/Sec) SCSI Adapter in 133MHZ PCI-A Solt 4, and
3 external Fujitsu MAX3073NP 73.5GB 15000 RPM 8MB Cache SCSI Ultra320 68pin 3.5" Hard Drives.
System Profile shows only PCI Slots not PCI-X?
Atto Configuration shoes the UL4D adapter locattion as PCI not PCI-X.
Max Data transfer from Ultra SCSI drive is ~ 90MB/Sec - expected ~ 320MB/Sec?
Any ideas on how to verify the 133 MHZ PCI-X Slot?
Oldal

Nothing in Console Logs.
Xbench tests summary follows:
Xbench Tests
Sequential & Random Uncached
Reads & Wirites for 4k blocks and 256k blocks
Drives: FUJITSU MAX3073NP 73 GB 15K
MAX
172.67
199.96
MIN
3.17
1.39
Drive(s)
I/O Type
Block
Write
Read
SCSI 1 SCSI 2 SCSI 3 Stripped Aray
Sequential
256
172.67
199.96
SCSI 1 SCSI 2 SCSI 3 Stripped Aray
Sequential
4
160.49
25.06
SCSI 1 SCSI 2 SCSI 3 Stripped Aray
Random
4
9.81
1.62
SCSI 1 SCSI 2 SCSI 3 Stripped Aray
Random
256
64.12
52.28
SCSI 1 SCSI 2 Mirrored Array
Random
4
3.02
1.44
SCSI 1 SCSI 2 Mirrored Array
Random
256
43.11
46.4
SCSI 1 SCSI 2 Mirrored Array
Sequential
4
127.05
81.94
SCSI 1 SCSI 2 Mirrored Array
Sequential
256
144.10
152.51
SCSI 1
Random
4
3.16
1.41
SCSI 1
Random
256
45.06
43.95
SCSI 1
Sequential
4
89.73
28.44
SCSI 1
Sequential
256
82.57
86.90
SCSI 2
Random
4
3.26
1.39
SCSI 2
Random
256
43.28
43.15
SCSI 2
Sequential
4
90.73
29.29
SCSI 2
Sequential
256
83.99
89.29
SCSI 3
Random
4
3.17
1.41
SCSI 3
Random
256
44.71
42.54
SCSI 3
Sequential
4
90.56
29.14
SCSI 3
Sequential
256
90.56
89.47
Hitachi HDT725025VLA380
Macinosh HD Inactive Partition
Sequential
4
51.47
27.84
Macinosh HD Inactive Partition
Sequential
256
47.60
50.04
Macinosh HD Inactive Partition
Random
4
0.83
0.61
Macinosh HD Inactive Partition
Random
256
25.08
22.21
I'm going to try testing with large A FileMaker Database and try to time different scripts.
THANK YOU for your interest and support.
OLDAL

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks, any ideas please?

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks and then sync them, any ideas please?

If you import the audiobook as an audiobook to your iTunes Library, it will be listed in the Books section of your Library. You may need to turn on Books in order to see them. If you cannot see the File/Edit... etc. menu, use CTRL B on your keyboard to make that menu bar appear. Then go to Edit/Preferences>Books and put a tick in the box.
But, if the imported audiobook shows up in the Music section of your iTunes Library, highglight the files (in iTunes) and select File/Get Info/Options/Media Kind>Audiobook. These files will now transfer to the Books section of iTunes.
Once on an iPod Classic, look under the Audiobooks menu. Again, you may need to change the settings in the Settings menus, in order to have the Audiobooks option shown on the Main Menu and/or the Music Menu.

HT201263 my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks

my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
 Cheers, Tom

How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?

How do I get signed into Icloud when it says my apple id is valid but not an icloud acct?

You will have to sign in to I cloud on any of the iOS device with version 5 or above once with your Apple Id to use your Apple Id as I cloud account. So if you have an iPhone iPad or iPod touch with iOS 5 or later.
On your iOS device go to settings > I cloud and sign in and you should be able to use your Apple Id as an icloud Id.

I rented a movie on my iPad. It began to download but then it disappeared. The movie appears in my rented videos, but when I click it, it says, "video rented but not downloaded. Go to downloads to manage downloads". Where did my downloads go?

I rented a movie on my iPad. It began to download but then it disappeared. I freed up a ton of storage space to make sure I had the room for it. The movie appears in my rented videos, but when I click it, it says, "video rented but not downloaded. Go to downloads to manage downloads". Where did my downloads go? I re-booted my iPad, signed off/on iTunes etc. I can't find a folder with downloadable items anywhere. ITunes just tells me, "you've already rented this video. Do you want to rent it again?" What happened to my movie?

Did you check the Videos app?

My ipad is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini about a month ago

My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini

I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777

Roland UM-ONE CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

Similar Messages

Maybe you are looking for