Role Creation using CAT Scripts

Hi,
Step by step procedure needed.
I need role creation using scripts(SECATT),org values that needs to maintain
is full authorization.
pls help me.
ram

Hi Ram,
There is a SECATT tutorial here: http://www.*********************/tutorials/secatt_user_create.html
If you learn that & the principles associated with SECATT then you can apply that to creating and populating roles.
In my opinion SCAT is much easier to use, though less flexible,

Similar Messages

Role creation for CATS

Hi all,
How can i create roles and authorisations fo CATS.I need to know how can i find out what are all roles required to manage CATS?
Give me inputs of source where i can find out some roles?
Regards,
Hema

Hi Hema,
The roles and authorizations depends on the work that a particular user is doing.
My suggestion :-
Have a discussion with your super user and find out what are all the tcodes that user is using.
Keep that tcodes in mind create one role to user and assign it.
There might be a specific tcodes to approver also.
Thanks
K. Bhaskar

Role Creation using SCAT-Urgent.....

Hi All,
I got a spread sheet with roles and transactions to be included in each role.Can anyone let me know how to Map this transactions to roles using SCATT?Please explain in a procedure which would be helpfull to me.Points will be rewarded to the answers.
Regards
Krishna

Hi Krishna,
If yor are just asking about running a script, than follow the steps below:
-Open the file, with excel and edit the data as per the requirement, and save the text file
-To execute the test case using the external variant from file, from the initial CATT screen, enter the test case name and choose Execute.
In the field Variants, select External from file and choose Choose. Select the file created above, and choose Open. Under Processing mode, select Errors, and choose Execute.
Note: When you use this method, the file must be imported each time the test case is executed (file remains only on PC).
If you are very new to CATT script, than use browse the link below:
http://www.*********************/tutorials/scat.htm
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

Custom role creation using secatt

hi sap peers!
can somebody tell me if it is possible to create custom roles using secatt or catt script.
if it is possible then how to do it.
thanks

Hi,
I hope This could help you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/121e3bd711bb04e10000000a114084/frameset.htm
You can find the eCATT Tutorial in the above link.
Cheers
Soma
Message was edited by:
soma pradeep

Error in oim Role creation using Role Manager Service API from Standalone Java client

Hi,
Facing the following error when trying to create Role using Role Manager Service API from a standalone java client .
Tried with the solution of changing ,
Login into the Web Logic Admin Console --> Servers --> OIM Server --> Protocols --> Modify the Maximum Message from 100000000 to 1000000000, but still the problem persists.
Exception in thread "main" org.omg.CORBA.BAD_PARAM: vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
at com.sun.org.omg.SendingContext._CodeBaseStub.meta(Unknown Source)
at com.sun.corba.se.impl.encoding.CachedCodeBase.meta(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.getOrderedDescriptions(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObjectUsingFVD(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(Unknown Source)
at oracle.iam.identity.rolemgmt.api._RoleManager_ogut7n_RoleManagerRemoteRIntf_Stub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.createx(Unknown Source)
at oracle.iam.identity.rolemgmt.api.RoleManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.subject.SubjectProxy.doAs(SubjectProxy.java:64)
at weblogic.security.subject.SubjectManager.runAs(SubjectManager.java:262)
at weblogic.security.Security.runAs(Security.java:48)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy3.create(Unknown Source)
at com.idm.role.CreateRole.createRole(CreateRole.java:113)
at com.idm.role.CreateRole.main(CreateRole.java:167)
Thanks In Advance

Hi , I have used OIM 11g R2.
Please find below the code we have used,
package com.idm.role;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Hashtable;
import java.util.Iterator;
import java.util.Set;
import java.util.logging.Logger;
import javax.security.auth.login.LoginException;
import oracle.iam.identity.exception.NoSuchRoleException;
import oracle.iam.identity.exception.RoleAlreadyExistsException;
import oracle.iam.identity.exception.RoleCreateException;
import oracle.iam.identity.exception.RoleLookupException;
import oracle.iam.identity.exception.RoleModifyException;
import oracle.iam.identity.exception.SearchKeyNotUniqueException;
import oracle.iam.identity.exception.ValidationFailedException;
import oracle.iam.identity.rolemgmt.api.RoleManager;
import oracle.iam.identity.rolemgmt.api.RoleManagerConstants;
import oracle.iam.identity.rolemgmt.vo.Role;
import oracle.iam.platform.OIMClient;
import oracle.iam.platform.authz.exception.AccessDeniedException;
public class CreateRole {
private final static Logger LOGGER = Logger.getLogger(CreateRole.class .getName());
OIMClient oimClient = null;
public OIMClient connectToOIM() {
LOGGER.info("In connectToOIM ");
Hashtable env = new Hashtable();
env.put(OIMClient.JAVA_NAMING_FACTORY_INITIAL,
 "weblogic.jndi.WLInitialContextFactory");
env.put(OIMClient.JAVA_NAMING_PROVIDER_URL,
 "t3://V-hydidm1.itig.co.in:14000");
System.setProperty("java.security.auth.login.config",
 "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\authwl.conf");
System.setProperty("java.security.policy",
 "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\xl.policy");
System.setProperty("OIM.AppServerType", "wls");
System.setProperty("APPSERVER_TYPE", "wls");
System.setProperty("weblogic.Name", "oim_server1");
oimClient = new OIMClient(env);
try {
 oimClient.login("xelsysadm", "Passw0rd".toCharArray());
} catch (LoginException e) {
 e.printStackTrace();
System.out.println("Connected");
return oimClient;
public void readRoleMetadata() {
LOGGER.info("in readRoleMetadata ");
RoleManager roleManagerService = oimClient
 .getService(RoleManager.class);
try {
 Role roleVo = roleManagerService.getDetails(
 RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
 Set attributeNameSet = roleVo.getAttributeNames();
 Iterator it = attributeNameSet.iterator();
 while (it.hasNext()) {
 System.out.println("Attribute Name :: " + it.next());
 // roleVo.setAttribute("ADentitlements", "Security Admin access");
 String adEntitlements = "" + roleVo.getAttribute("ADentitlements");
 System.out.println("AD Entitlements :: " + adEntitlements);
 System.out.println("DB Entitlements :: " + ""
 + roleVo.getAttribute("DBEntitlements"));
 System.out.println("Unix Entitlements :: " + ""
 + roleVo.getAttribute("UnixWindows"));
 System.out.println("VPN :: " + "" + roleVo.getAttribute("VPN"));
} catch (SearchKeyNotUniqueException e) {
 e.printStackTrace();
} catch (NoSuchRoleException e) {
 e.printStackTrace();
} catch (RoleLookupException e) {
 e.printStackTrace();
} catch (AccessDeniedException e) {
 e.printStackTrace();
public void createRole() {
LOGGER.info(" in Create role ");
RoleManager roleManagerService = oimClient
 .getService(RoleManager.class);
HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
roleCreationAttrMap.put(RoleManagerConstants.ROLE_NAME, "API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DESCRIPTION,
 "This Role is created using API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DISPLAY_NAME,
 "API Role1");
roleCreationAttrMap.put("ADentitlements", "API Role1 AD Entitlements");
roleCreationAttrMap.put("DBEntitlements", "API Role1 DB Entitlements");
roleCreationAttrMap.put("VPN", "No");
roleCreationAttrMap.put("UnixWindows", "API Role1 Unix Entitlements");
Role roleVo = new Role(roleCreationAttrMap);
try {
 System.out.println(" Before Create role *********************************************");
 roleManagerService.create(roleVo);
 System.out.println("Role Created .. ");
} catch (ValidationFailedException e) {
 e.printStackTrace();
} catch (RoleAlreadyExistsException e) {
 e.printStackTrace();
} catch (RoleCreateException e) {
 e.printStackTrace();
} catch (AccessDeniedException e) {
 e.printStackTrace();
public void modifyRole() {
LOGGER.info(" in modifyRole ");
RoleManager roleManagerService = oimClient
 .getService(RoleManager.class);
Role roleVo;
try {
 roleVo = roleManagerService.getDetails(
 RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
 String roleKey = roleVo.getEntityId();
 HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
 roleCreationAttrMap.put("ADentitlements",
 "Updated API Role1 AD Entitlements");
 Set roleKeySet = new HashSet<String>();
 roleKeySet.add(roleKey);
 Role roleVoNew = new Role(roleCreationAttrMap);
 roleManagerService.modify(roleKeySet, roleVoNew);
 System.out.println("Role Modified ..");
} catch (SearchKeyNotUniqueException e) {
 e.printStackTrace();
} catch (NoSuchRoleException e) {
 e.printStackTrace();
} catch (RoleLookupException e) {
 e.printStackTrace();
} catch (AccessDeniedException e) {
 e.printStackTrace();
} catch (ValidationFailedException e) {
 e.printStackTrace();
} catch (RoleModifyException e) {
 e.printStackTrace();
public static void main(String args[]) {
CreateRole miscObj = new CreateRole();
miscObj.connectToOIM();
miscObj.createRole();
//miscObj.readRoleMetadata();
Thanks In Advance .

11g R2: Role creation using API

I am trying to create a role using OIM API RoleManager
            RoleManager roleService = oimClient.getService(RoleManager.class);
            Role roleObj = new oracle.iam.identity.rolemgmt.vo.Role("");
            roleObj.setAttribute("Role Name","SampleTestRole");
            roleObj.setAttribute("Role Display Name","Sample Test Role");
            roleObj.setAttribute("Role Description","Sample Test Role");
            System.out.print(roleService.create(roleObj));
            System.out.print("Role has been created.... ");
I am getting the following exception:
oracle.iam.identity.exception.RoleCreateException: Orchestration process with id 14915, failed with error message null.
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.identity.rolemgmt.api.RoleManager_ogut7n_RoleManagerRemoteImpl_1036_WLStub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.createx(Unknown Source)
at oracle.iam.identity.rolemgmt.api.RoleManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)

Tried as suggested in the link posted but still getting the same exception.
        Role managerRole=new Role("powerUser");
        managerRole.setName("powerUser");
        managerRole.setDisplayName("powerUser");
oracle.iam.identity.exception.RoleCreateException: Orchestration process with id 14930, failed with error message null.
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.identity.rolemgmt.api.RoleManager_ogut7n_RoleManagerRemoteImpl_1036_WLStub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy4.createx(Unknown Source)
at oracle.iam.identity.rolemgmt.api.RoleManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy5.create(Unknown Source)

Disable the buttons for creation using PFCG roles

Hi SAP Experts,
 How to disable the buttons for creation using PFCG roles?
Regards,
Jaya

Hi,
u have to write the code in at selection-screen output event
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF P_PRINT = 'X'. " this is radiobutton
 IF screen-name = 'P_RANGE'.
 SCREEN-INPUT = 0.
 ENDIF.
 modify screen.
 ELSE.
 IF screen-name = 'S_LFDAT-LOW'.
 SCREEN-INPUT = 0.
 ENDIF.
 IF screen-name = 'S_LFDAT-HIGH'.
 SCREEN-INPUT = 0.
 ENDIF.
 IF screen-name = 'S_WERKS-LOW'.
 SCREEN-INPUT = 0.
 ENDIF.
 IF screen-name = 'S_WERKS-HIGH'.
 SCREEN-INPUT = 0.
 ENDIF.
 IF screen-name = 'P_LIFNR'.
 SCREEN-INPUT = 0.
 ENDIF.
 IF screen-name = 'S_BUKRS'.
 SCREEN-INPUT = 0.
 ENDIF.
 modify screen.
 ENDIF.
ENDLOOP.
Hope it helps.
Regards,
Sonika

How to get latest added file from a folder using apple script

Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
    set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
    set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
    activate
    set theFolderWindow to container window of theFolder
    set alreadyOpen to exists theFolderWindow
    tell theFolderWindow
        open
        set theInitialView to current view
        set current view to icon view
    end tell
end tell
tell application "System Events" to tell process "Finder"
    -- Arrange by None:
    set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "0" using {control down, command down}
    -- Sort by Date Added:
    set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "4" using {control down, option down, command down}
    -- Get the name of the last item:
    set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
    -- Restore the initial settings:
    click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
    click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
    set current view of theFolderWindow to theInitialView -- restore the initial view
    if not alreadyOpen then close theFolderWindow
    set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L.

Custom List Form creation using Powershell - SharePoint 2013

Hi,
I have a custom List called 'IssuesList' with 4 fields - "IssueTitle","IssueID","IssueDesc","Status"
While displaying display form I should show 3 fields expect Issue ID i.e. IssueID should be hidden.
and on edit form only Status field should be editable. So using SharePoint designer I created respective Edit form and display forms and changed XSLT to control the display mode on the fields.
I have everything scripted in powershell till now - creation of custom list, publishing pages, webparts etc. however I am looking for how to provision or associate these 2 list forms with IssuesList after I create the list in new site.
I have restrictions on using wsp and site/list template due to business needs. So I need to know if there is any way I can upload these 2 files after I create custom list in powershell and associate them as defaultdisplay and defauteditforms?
Please advise.

Hi,
Per my understanding, you might need to apply these custom forms to a list after list creation using PowerShell.
With PowerShell with SharePoint Object Model, we can hide fields on list forms.
The similar thread below with code snippet will provide more information about this:
https://social.technet.microsoft.com/Forums/en-US/ee6fc2eb-197f-4144-94fa-8a4e438675d9/hide-a-field-from-edit-form-list?forum=sharepointgeneralprevious
If there may be other requirements except for hiding fields, as you have limitation on using custom solution package(which should be preferable in such scenario),
a workaround I can provide is that, after list creation, you can add Content Editor Web Part contains the CSS style or JavaScript to the form pages of a specific list, it will help you hide/disable the specific elements, this can be achieved programmatically.
The code below can add a Content Editor Web Part to the DisplayForm of a list(though in C#):
public static void AddCEWP()
SPLimitedWebPartManager manager = null;
SPFile file = null;
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
try
web.AllowUnsafeUpdates = true;
file = web.GetFile(web.Url + "/Lists/List018/DispForm.aspx");
manager = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
ContentEditorWebPart webPart = new ContentEditorWebPart();
XmlDocument xmlDoc = new XmlDocument();
XmlElement xmlElement = xmlDoc.CreateElement("HtmlContent");
//xmlElement.InnerText = "Hello World!";
//write the custom CSS style or JavaScript here
string content = "<style>your custom style here...</style>";
xmlElement.InnerText = content;
webPart.Content = xmlElement;
manager.AddWebPart(webPart, "Top", 0);
manager.SaveChanges(webPart);
web.Update();
catch (Exception ex)
//Utility.SPTraceLogError(ex);
finally
if (manager != null)
manager.Dispose();
web.AllowUnsafeUpdates = false;
About how to hide fields on Standard List Forms using jQuery:
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
http://stackoverflow.com/questions/10010405/how-to-hide-a-field-in-sharepoint-display-form-based-on-the-field-name-jquery
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

WLST Domain Creation using JRF template throws SQLRecoverableException

I am working on domain creation using templates and included the JRF template to use OPSS functionality.
I have run the RCU utility to create the required components that will have necessary tables to host OPSS data and also tested that it works with CC_STB user that i will use to connect from WLS.
I am able to ping the database server having RCU components from the VM where i want to create and configure the domain but when i configure the LocalSvcTblDataSource with the same ip address and try to setup the OPSS datasources, it gives me "Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified Error Code: 17002"
Below is my WLST python script:
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
#=======================================================================================
# Create and configure a JDBC Data Source, and sets the JDBC user.
#=======================================================================================
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:15210/xe')
set('PasswordEncrypted', 'password')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('CC_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/cc_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
And the complete exception trace.
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/base_domain>dumpStack();
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:55)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1967)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx5.writeDomain$15(/tmp/WLSTOfflineIni4846195865917165143.py:73)
at org.python.pycode._pyx5.call_function(/tmp/WLSTOfflineIni4846195865917165143.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx93.f$0(<console>:1)
at org.python.pycode._pyx93.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:219)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.ScriptExecutor.runGenerator(ScriptExecutor.java:3706)
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:991)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1117)
... 29 more
Caused by: com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:129)
at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:315)
at java.lang.Thread.run(Thread.java:744)
Caused by: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:708)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.configureDBSecurityStore(OpssDomainConfigImpl.java:339)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.initializeSubsystem(OpssDomainConfigImpl.java:166)
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:126)
... 2 more
Caused by: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.processJPAException(JpsDBDataManager.java:2088)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:955)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1459)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1455)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.<init>(JpsDbBootstrapImpl.java:162)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:679)
... 5 more
Caused by: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:614)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:186)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:278)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:304)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:282)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getVersion(JpsDBDataManager.java:1027)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getEMFAndSubject(JpsDBDataManager.java:1124)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:907)
... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:319)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:138)
at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:690)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:215)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:554)
... 16 more
Caused by: java.sql.SQLRecoverableException: IO Error: Unknown host specified
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:465)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:187)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:98)
... 20 more
Caused by: oracle.net.ns.NetException: Unknown host specified
at oracle.net.resolver.HostnameNamingAdapter.resolve(HostnameNamingAdapter.java:191)
at oracle.net.resolver.NameResolver.resolveName(NameResolver.java:133)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:416)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:687)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:247)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1109)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:316)
... 27 more
Any help/pointers/hints will be helpful
Thanks,
Santosh

Hi Micheal,
Thanks a Lot for your response.
We have checked the OS requirements :
System Itanium 11i (11.31) B.11.31.0803.318a Base Quality Pack Bundle for HP-UX 11i v3, March 2008+
Response:
======
We have the higher version installed for this quality pack.
QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011
2) Required Packages : HPDesktopDev (version B.11.31.01)
Response:
=======
This package is also installed.
X11MotifDevKit B.11.31.01 HP-UX Desktop Developer's Toolkit - X11, Motif, and Imake
3) Required Operating System Patches
PHKL_36248
PHKL_36249
PHSS_37202
PHSS_37501
PHCO_38050
PHSS_38139
Response:
========
We have the supersets for these patches installed. The installation logs also confirm these patches at the OS level.
Check Name:Patches
Check Description:This is a prerequisite condition to test whether the patches recommended for installing the product are available on the system.
Checking for PHKL_36248; found PHKL_36248. Passed
Checking for PHKL_36249; found PHKL_36249. Passed
Checking for PHSS_37202; found PHSS_37202. Passed
Checking for PHSS_37501; found PHSS_37501. Passed
Checking for PHCO_38050; found PHCO_38050. Passed
Checking for PHSS_38139; found PHSS_38139. Passed
Check complete. The overall result of this check is: Passed
Regards
Sumit Kapila

How to get ORA errors in alertlog file using shell script.

Hi,
Can anyone tell me how to get all ORA errors between two particular times in an alertlog file using shell script.
Thanks

Hi,
You can define the alert log as an external table, and extract messages with SQL, very cool:
http://www.dba-oracle.com/t_oracle_alert_log_sql_external_tables.htm
If you want to write a shell script to scan the alert log, see here:
http://www.rampant-books.com/book_2007_1_shell_scripting.htm
#!/bin/ksh
# log monitoring script
# report all errors (and specific warnings) in the alert log
# which have occurred since the date
# and time in last_alerttime_$ORACLE_SID.txt
# parameters:
# 1) ORACLE_SID
# 2) optional alert exclusion file [default = alert_logmon.excl]
# exclude file format:
# error_number error_number
# error_number ...
# i.e. a string of numbers with the ORA- and any leading zeroes that appear
# e.g. (NB the examples are NOT normally excluded)
# ORA-07552 ORA-08006 ORA-12819
# ORA-01555 ORA-07553
BASEDIR=$(dirname $0)
if [ $# -lt 1 ]; then
echo "usage: $(basename) ORACLE_SID [exclude file]"
exit -1
fi
export ORACLE_SID=$1
if [ ! -z "$2" ]; then
EXCLFILE=$2
else
EXCLFILE=$BASEDIR/alert_logmon.excl
fi
LASTALERT=$BASEDIR/last_alerttime_$ORACLE_SID.txt
if [ ! -f $EXCLFILE ]; then
echo "alert exclusion ($EXCLFILE) file not found!"
exit -1
fi
# establish alert file location
export ORAENV_ASK=NO
export PATH=$PATH:/usr/local/bin
. oraenv
DPATH=`sqlplus -s "/ as sysdba" <<!EOF
set pages 0
set lines 160
set verify off
set feedback off
select replace(value,'?','$ORACLE_HOME')
from v\\\$parameter
where name = 'background_dump_dest';
!EOF
`
if [ ! -d "$DPATH" ]; then
echo "Script Error - bdump path found as $DPATH"
exit -1
fi
ALOG=${DPATH}/alert_${ORACLE_SID}.log
# now create awk file
cat > $BASEDIR/awkfile.awk<<!EOF
BEGIN {
# first get excluded error list
excldata="";
while (getline < "$EXCLFILE" > 0)
{ excldata=excldata " " \$0; }
print excldata
# get time of last error
if (getline < "$LASTALERT" < 1)
{ olddate = "00000000 00:00:00" }
else
{ olddate=\$0; }
errct = 0; errfound = 0;
{ if ( \$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (dtconv(\$3, \$2, \$5, \$4) <= olddate)
{ # get next record from file
next; # get next record from file
# here we are now processing errors
OLDLINE=\$0; # store date, possibly of error, or else to be discarded
while (getline > 0)
{ if (\$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (errfound > 0)
{ printf ("%s ",OLDLINE); }
OLDLINE = \$0; # no error, clear and start again
errfound = 0;
# save the date for next run
olddate = dtconv(\$3, \$2, \$5, \$4);
continue;
OLDLINE = sprintf("%s %s",OLDLINE,\$0);
if ( \$0 ~ /ORA-/ || /[Ff]uzzy/ )
{ # extract the error
errloc=index(\$0,"ORA-")
if (errloc > 0)
{ oraerr=substr(\$0,errloc);
if (index(oraerr,":") < 1)
{ oraloc2=index(oraerr," ") }
else
{ oraloc2=index(oraerr,":") }
oraloc2=oraloc2-1;
oraerr=substr(oraerr,1,oraloc2);
if (index(excldata,oraerr) < 1)
{ errfound = errfound +1; }
else # treat fuzzy as errors
{ errfound = errfound +1; }
END {
if (errfound > 0)
{ printf ("%s ",OLDLINE); }
print olddate > "$LASTALERT";
function dtconv (dd, mon, yyyy, tim, sortdate) {
mth=index("JanFebMarAprMayJunJulAugSepOctNovDec",mon);
if (mth < 1)
{ return "00000000 00:00:00" };
# now get month number - make to complete multiple of three and divide
mth=(mth+2)/3;
sortdate=sprintf("%04d%02d%02d %s",yyyy,mth,dd,tim);
return sortdate;
!EOF
ERRMESS=$(nawk -f $BASEDIR/awkfile.awk $ALOG)
ERRCT=$(echo $ERRMESS|awk 'BEGIN {RS=" "} END {print NR}')
rm $LASTALERT
if [ $ERRCT -gt 1 ]; then
echo "$ERRCT Errors Found \n"
echo "$ERRMESS"|nawk 'BEGIN {FS=" "}{for (i=1;NF>=i;i++) {print $i}}'
exit 2
fi

How to write CLOB parameter in a file or XML using shell script?

I executed a oracle stored procedure using shell script. How can i get the OUT parameter of the procedure(CLOB) and write it in a file or XML in UNIX environment using shell script?
Edit/Delete Message

SQL> var c clob
SQL>
SQL> begin
2 select
3 DBMS_XMLGEN.getXML(
4 'select rownum, object_type, object_name from user_objects where rownum <= 5'
5 ) into :c
6 from dual;
7 end;
8 /
PL/SQL procedure successfully completed.
SQL>
SQL> set long 999999
SQL> set heading off
SQL> set pages 0
SQL> set feedback off
SQL> set termout off
SQL> set trimspool on
// following in the script is not echo'ed to screen
set echo off
spool /tmp/x.xml
select :c from dual;
spool off
SQL>
SQL> --// file size
SQL> !ls -l /tmp/x.xml
-rw-rw-r-- 1 billy billy 583 2011-12-22 13:35 /tmp/x.xml
SQL> --// file content
SQL> !cat /tmp/x.xml
<?xml version="1.0"?>
<ROWSET>
<ROW>
<ROWNUM>1</ROWNUM>
<OBJECT_TYPE>TABLE</OBJECT_TYPE>
<OBJECT_NAME>BONUS</OBJECT_NAME>
</ROW>
<ROW>
<ROWNUM>2</ROWNUM>
<OBJECT_TYPE>PROCEDURE</OBJECT_TYPE>
<OBJECT_NAME>CLOSEREFCURSOR</OBJECT_NAME>
</ROW>
<ROW>
<ROWNUM>3</ROWNUM>
<OBJECT_TYPE>TABLE</OBJECT_TYPE>
<OBJECT_NAME>DEPT</OBJECT_NAME>
</ROW>
<ROW>
<ROWNUM>4</ROWNUM>
<OBJECT_TYPE>TABLE</OBJECT_TYPE>
<OBJECT_NAME>EMP</OBJECT_NAME>
</ROW>
<ROW>
<ROWNUM>5</ROWNUM>
<OBJECT_TYPE>TABLE</OBJECT_TYPE>
<OBJECT_NAME>EMPTAB</OBJECT_NAME>
</ROW>
</ROWSET>
SQL>

Request Number is not generated for BRM "new" role creation

Hello Gurus,
I have configured BRM in SAP GRC AC 10, along with the workflow .
I have selected the following methodology
Define Role --> Maintain Auth >Analyze & Access Risk>Request Approval>Generate Roles>Maintain Test Cases
Role name : Y_TEST_BRM_FUNCTIONALITY
So i do the following steps and assign
1) Role approver as Mr. ABC & Alternate approver as Mr. QRS
2) Assign the Required transactions and do the RAR i.e i am done till step 3 of methodology
When i click "Initiate Approval request"
The approval triggers , and goes to the 1st stage as configured in MSMP
1) Power User Approval .
Here the Power User : EFG , open his workflow and see the request as
Role approval required for role Y_TEST_BRM_FUNCTIONALITY
The approver approves the request and then the request all together vanishes.
Unfortunately i am not able to search the request for that role from NWBC -->Search request by
Process Id : Role Approver Workflow
It gives blank !!
Hence neither i am able to find the request no able to do any debugging of it using
GRFNMW_DBGMONITOR_WD
Please note that the Request Id is created for any request in CUP.
Is it that i have to create a number range for BRM request ??
If so will you please let me know the object

Hello All,
I was wrong in posting the cause of problem.
Please note no "Request number" is generated for Role creation Request.
The problem was i was unable to search the Role Request approval status from "Search Request" via Process Id
It got resolved via SAP note 1643539 : UAM: Search Request not returning result for some Process Id.
My Issues is Resolved.
Thank You.
Regards,
Victor

Create document set using ECMA Script

Hi,
I want to create a document set in SharePoint 2010 document library where i have already included document set content type.
Is there any way to create a document set using ECMA Script?? If yes, then please provide the sample code for this...
Thanks.
-Prashant

Hi Prashant,
Although this post is aimed at SP 2013 and the App model, it should give you the object model references you need to complete your goal:
http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
In particular the following function should be of use:
function CreateDocumentSet() {
var ctx = new SP.ClientContext("http://yourSharePointSite");
var parentFolder;
var newDocSetName = $('#txtGetDocumentSetName').val();
var docSetContentTypeID = "0x0120D520";
var web = ctx.get_web();
var list = web.get_lists().getByTitle('DocSetLibrary');
ctx.load(list);
parentFolder = list.get_rootFolder();
ctx.load(parentFolder);
var docsetContentType = web.get_contentTypes().getById(docSetContentTypeID);
ctx.load(docsetContentType);
ctx.executeQueryAsync(function () {
var isCreated = SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
ctx.executeQueryAsync(SuccessHandler('Document Set creation successful'), FailureHandler("Document Set creation failed"));
}, FailureHandler("Folder loading failed"));
ctx.add_requestSucceeded(function () {
$('#txtGetDocumentSetName').val('');
alert('Request Succeeded');
ctx.add_requestFailed(function (sender, args) {
alert('Request failed: ' + args.get_message());
// Failure Message Handler
function FailureHandler(message) {
return function (sender, args) {
alert(message + ": " + args.get_message());
// Success Message Handler
function SuccessHandler(message) {
return function () {
alert(message);
Keith Tuomi | Twitter: @itgroove_keith | Blog:
http://yalla.itgroove.net
Please click "Propose As Answer" if a post solves the problem or "Vote As Helpful" if a post has been useful to you.

Role Creation in CUP 5.3

Hello,
I'm trying to understand the concept of what is called "role creation" in Compliant User Provisioning.
My understanding is that the "create role" option in CUP (configuration>Roles>Create Role) means simply adding the "attributes" such as a business process, functional area, system, or company, to the SAP roles that you imported into CUP.
It seems that, with CUP, once you have imported SAP roles and "adjusted" them (adding attributes), you are no longer operating PFCG and SU01 in the SAP backend system. From this point on, everything is done in CUP (provisioning) and ERM (creating additional roles).
Please tell me if I'm wrong.
HM

HM,
The create role option in CUP is mainly for legacy/non-cup supported systems. This way you can follow the standard workflow process for LDAP/Windows/legacy system. In this user provisioning and role assignment will not be done through CUP and will be manual. This is very important for some companies as they want user to go through same process if they want to get access to any system and not only ERP system.
The below statement is wrong.
It seems that, with CUP, once you have imported SAP roles and "adjusted" them (adding attributes), you are no longer operating PFCG and SU01 in the SAP backend system. From this point on, everything is done in CUP (provisioning) and ERM (creating additional roles).
If you don't have ERM then you will have to use PFCG. Once you have CUP, you don't have to use SU01.
Regards,
Alpesh

Role Creation using CAT Scripts

Similar Messages

Maybe you are looking for