Roles Cancelling Each Other
I have 2 roles that allows a user to create certain order types using tcode IW31:
- Role1 can create order type Z1, Z2, Z3.
- Role2 can only create order type ZT.
Used to be that these roles go to different group people, never together. We now want to give both roles to the same people. But during testing we are finding out that both roles are cancelling the other's authorizations.
If we assign both roles to the same user, the expected outcome is that he should be able to create all 4 order types( Z1, Z2, Z3, ZT). Unfortunately, this is not the case... When the user is creating any of the Z1, Z2, or Z3 order types, he is getting the error message "No authorization for ordertype Z1 in planning plant 1000". Then when he creates a ZT order type, he is also getting the same error "No authorization for order type ZT in planning plant 1000".
Have any of you encountered this problem? How did you resolve it? Any suggestions are highly appreciated.
Thanks in advance!
Roles don't normally cancel each other. You were not meant to give a trick answer back
I had my bets on customizing completeness for the plants but am not so sure now. Actually, I don't know. But I will think about it.
Perhaps try drop an SU53 into the error to see exactly what was requested in the last failed authority-check before the error, and what the user has in the authorizations when Role1 and Role2 are assigned?
Then trace the Role1-only user and compare what is checked. There is a usefull feature in the trace to jump to the source code location of the check. The answer is most likely there (also check whether the source code location is the same location as the both-roles-assigned user. It might, for some reason, be finding that the user is authorized for all possible values of the order type field, and therefore sharpening the checks on the planning plant field at some other location.
It might even be in an EXIT which has been activated for some reason coding of the role with an authority-check in it which does not like the other role at all and throws this message to say "bugger off, you should not be here if you have any other authority, or too much authority". Checking for EXITs would be my second bet then.
But that is just "not-logged-on-guessing" from me.
Cheers,
Julius
Edited by: Julius Bussche on May 25, 2008 9:44 PM
Similar Messages
-
Is there a way to have 2 or more text boxes and not have them cancel each other out?
In the past you could overlap text boxes, but now when I place a text box to close to another it will completely make the other disappear. Is there something I need to change in my pages setting to allow this function, or do I just need to use the iWork 09?
ANSWER:
-click "Format" (the paint brush on the top right hand side of the window)
-click "Arrange" (3rd box on the top right hand side of the window)
-Under "Text Wrap" you will see a drop down menu that defaults to "Automatic"
-click "Automatic" and select "None"
You will have to do this for each text box. Once thats done you can move the boxes as close as you want. -
Problem: workflows cancel each other
Hi all,
I'm facing a strange problem right now, probably some fundamental misunderstanding about how workflows work. :-(
My hr-system exports data to a database-resource with a change-flag and I run active sync to detect changes. This is the source for attributes like firstname, lastname, etc.
Works as expected.
However, I provision to an Active Directory, which generates attributes like email-address, so this Active Directory is my source for some specific attributes like the preferred email-address. I use active sync, which works as expected.
Sounds good? Hmmm, not really.
Currently, I get updates from hr, process them through active sync and provision data to active directory which in turn creates an active sync event for the active directory resource, even before processing of the original hr-update is completed. That process is suspended for one minute (workitem with timeout) for replication to take place and in that minute the active directory update is detected....
When all is said an done, both update-workflows are cancelled and do not complete as expected. The second one (active directory-triggered) complains about a locked user account, which is perfectly ok. But I expected that process to wait for the lock to expire? And why is the hr-based workflow never resumed properly and disappers?
Currently I just have no idea what's going on and how to synchronize those workflows in a way that makes both of them complete (and succeed).
Any ideas anybody?
Any help would be greatly appreciated.
CU,
Patrick.Hi Paul,
this is precisely what I expected, but not what I see. :-(
So, let's say there are resources "HR" and "AD", then according to my naming conventions I create users "ASuserHR" and "ASuserAD" and forms "myASformHR" and "myASformAD". Further I had to create special workflows "myWFupdateHR" and "myWFupdateAD".
Now, there is a change in "HR" for user "testuser" and ASuserHR processes this changes, starts the workflow "myWFupdateHR" which performs enableUser on resource "AD" and then suspends by creating a workitem for "Configurator" with a timeout of one minute to wait for replication. I can see this happening in the audit-log and consider assigning the workitem to ASuserHR in the future.
Then "AD" triggers and user "ASuserAD" tries to access "testuser", which is locked, so ASuserAD fails. I can see this happening in the audit-log.
In my testlab usually everything continues as expected, but in production frequently ASuserHR just fails to complete the workflow. I've only been able to watch such a behaviour once in my testlab (yesterday late, after my original posting) and discovered a server-task owned by ASuserHR which said "failed with errors" and "could not access testuser, which is locked by ASuserAD".
So it looks like the user is locked by ASuserHR first but somehow it can happen (sometimes) that ASuserAD creates a conflict. I'll try to reproduce the situation again (perhaps I can find the reason it only happens sometimes), but I'm rather baffled.
Regarding my environment: production is sun idm 8.0p11 and test ist oracle waveset 8.1.1p3
CU,
Patrick. -
Snow Leopard Mail - Bouncing Icon/Play Sound Rules Cancel Each Other Out
I recently saw a movie which featured many closeups of a MacBook Pro being used; every time the actor got an e-mail message, the Mail icon bounced in the Dock AND played the New Message Sound. In the current version of Snow Leopard Mail, you can create a Rule to 'Bounce Icon in Dock' when a new message is received. Unfortunately, this disables the New Message Sound. When the user adds another Rule to 'Play Sound', this rule disables the 'Bounce Icon in Dock' feature. At this point, both Rules display as being active, but only one of them works. Anyone know how to get both the New Message Sound AND the bouncing icon? (The actor was able to do it in the movie, but maybe that was just special effects.)
Look at that:
http://discussions.apple.com/thread.jspa?threadID=1262364&tstart=0&messageID=732 9984
Post 5 and 10
You can use both rules together (sound & bouncing)
I had test it!
mindsuk -
Multiple sounds cancelling each other out
Hi all,
I've got a little problem and hopefully someone will know
what I'm talking about here...
I have a music track in my movie which I want playing the
whole time and then various different voice over tracks which come
in at certain points in the movie. I load the music with
attachSound and it starts playing fine. Then I load the first voice
clip into an object with a different name and it plays just fine
over the music. The problem comes, however, when I go to play the
second voiceover clip. It completely cuts out the music track, for
no apparent reason! It's always the second voiceover, irrespective
of which clip I play or where it appears on the timeline.
Any thoughts?
Thanks!OK folks well against the odds and despite all the time I've
spent talking to myself on this board I've solved the problem. I
didn't find it anywhere on the web - I figured it out myself - and
so I'll post the answer here for completeness and so hopefully
someone else will be able to benefit from it in the future.
The trick is that when you set the volume on a sound object
you are actually setting the volume on the movieclip that it's in.
So if you attach your sound to _root and then setVolume on that
sound, you are effectively setting the volume for the _root
movieclip (ie the whole flash movie). You need to either create a
new movieclip in the library and attach the sound in that or use
createEmptyMovieClip() to make one on the fly with actionscript.
Once it is created you need to refer to it when you create
the sound object. Here's some example code:
[code]
createEmptyMovieClip("music", getNextHighestDepth());
music.bgmusic = new Sound(_root.music);
music.bgmusic.attachSound("bgmusic");
music.bgmusic.start();
music.bgmusic.setVolume(50);
[/code]
Make sure that the sound has linkage as "bgmusic" (or
whatever you want to call it) -
I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?
Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Roles for each Product in Oracle Apps 11i
Hi,
I have one requirement to create role for each product...
For example:
Inventory (INV)... I need to create a role, which will have select privileges on all tables of Inventory...like that for each production, I need to create...
I have one procedure:
(a) create role inv_read_role;
(b) spool the following statement
sql> spool inv_read.lst
sql> select 'grant select on INV.'||object_name||' '||'to INV_READ_ROLE;' from dba_objects where owner='INV' and object_type='TABLE';
sql> spool off
(c) Run the above spool file
Here we are done...
But, If I want to do this for all products in oracle apps 11.5.10.2..
is there any smarter way to do this????? any stored procedure???I want to give readonly access to AP Tables to one database user or more no of database users.....how can we give...for that , we are going to create seperate role for each module in database..assign that role to database user...then he will be able to select only on that module tables......
-
Plotting 2 Columns of Data Against Each Other, Not With Time
I have several data columns, one with current, one with voltage, one with time. I am trying to make and IV curve, plotting the current and voltage against each other, preferably with the voltage as the Y axis and current as the X axis. However, every time
I try to select the two columns and scatterplot them, excel automatically makes it either a stacked graph of current with time and voltage with time, or just gives me voltage with time. How do I get excel to simply graph the two columns that I select?Try the following:
If you have a chart with 2 series V and I both plotted on the Y axis, against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select one of the two series (it doesn't matter which).
Click Edit.
Select the text displayed in the 'Series Y values' box, and copy it (Ctrl+C).
Click Cancel.
With the same series still selected, click Remove.
Select the remaining series, then click Edit.
Click in the 'Series X values' box, then paste (Ctrl+V).
Click OK, then OK again.
If you have a chart with only one series (either V or I) plotted against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select the series.
Click Edit.
If there is anything in the 'Series X values' box, clear it.
With this box still selected, use the mouse to select the data range of cells for the other quantity you want to plot.
Click OK, then OK again.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
How to show masterdata in colums next to each other?
Hey guys!
I'm working on a query where we're using a characteristic and several key figures. This characteristic is a masterdata object which shows various user roles belonging to a project.
What I would like to see in my report is the project name plus the user roles (multiple roles per project!) in the colums, followed by the key figures. Each 'rolecolumn' then shows the name of the user.
BUT!
I would like to see the roles (masterdata) next to each other, each in a separate column followed by the key figures.
Standard SAP shows a role in a colum, then all key figures, then another role, then all key figures again etc.
Any advice on how to solve this?
Regards,
Joost
Edited by: Joost on Jun 2, 2008 12:09 PM
Edited by: Joost on Jun 2, 2008 12:10 PMHey Balaji,
Thanks for your reply. Unfortunately, your solution of drilling down to other reports is not allowed at the customer. Should you have any other solutions, let me know.
Regards,
Joost -
I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?
Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.
-
How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
My wife and I both have an iphone. We initially set them up under one apple id account. When we text sometimes we will receive each others text messages from others. Example I will text a friend...she will not see my text but the reply comes to both of us. It seems to be random which ones. Any ideas how to correct this
Yup, get your own AppleID.
The messages that are being sent to both phones are technically not text, they are Apple's iMessage. They use the data part, not the texting part. So if you have an iPad or a Mac computer, you can send/receive the iMessages there too.
KOT -
My boyfriend and I both share an itunes together on my mac book pro, is there away to have seperate apple ID's but both are connected to the shared itunes and have access to all of our purchases? I am asking this becaue since my boyfriend and I both have iphones, we keep revieving each others messages and conversations, and not only is it annoying, but it is an invashion of privacy both ways, on his side and mine. What do we do?
Can you even change your apple ID on your iphone without losing your contacts, apps, music etc..? Can you even have two apple ID's on one shared itunes? Some help me out here, I am so confused.All apps and purchases are linked to your apple ID, so you can't share them across 2 devices that are using different apple id's, it won't work. the purchases that are on your mac at the moment will only work with the apple id they were brought with.
the only thing thats possible to share is purchased music. you have to first covert it to mp3 within itunes, then your bf can import it into his own itunes library and sync with his phone. -
I think Apple should be a bit more cautionary about iCloud and privacy. My family shares the same iCloud account as we all enjoy the music we collectively purchase on iTunes; we paid Apple for this feature with some kind of grouped account. We didn't know, however that this joins our devices so that iMessages, contacts, pictures and just about everything else is shared too. The unprivate default seems to be to share everything between all devices vs. to allow access by exception or by choice (or by password?). Sure, when my kids get all my texts I can go figure out why and fix it but that is in my mind the antithesis of privacy and could be quite embarrassing for any family. I guess it is good for stalking the kids or parents though if they don't know about the partyline approach to privacy. Maybe a tech solution would be to have the iPhone show somehow the extent of its audience to its user.
No argument from me about the vagaries of using and sharing Apple IDs. This can lead to unintended consequences, especially in a family situation.
If you're sharing the same ID for FaceTime, you might want to go to Settings>FaceTime, tap the ID, sign out, then sign in with separate IDs there too. Otherwise, you'll end up getting each other's FaceTime calls.
Also, if you need to migrate everyone's devices to separate iCloud accounts to keep your synced data separated, you can do this by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. Once everyone's devices are on separate accounts, you can go to icloud.com and delete each other's data from your accounts. -
I have one Itunes account for myself and children. Can we facetime each other on different devices?
I have one Itunes account for myself and my children. Can we facetime each other on different devices?
Yes, you can.
See here: https://www.apple.com/ios/facetime/
Maybe you are looking for
-
How to change the Number of IVR ports in a UCCX?
I know this question has been asked before but it needs to be asked again, as previous answers do not seem to apply. The simple quesiton is: If you have a UCCX and if after install you check you check License information and you note that you have
-
Posting of cross company transaction with different doc types
Hi, The scenario is:- We have two companies X and Y. X makes a payment to Y with the following FI entries:- Company Code X Dr Vendor Y Cr Bank HDFC Company Code Y Dr Bank ICICI Cr Customer X Now this needs to be a cross company transaction where the
-
Is there a way to transfer video from Aperture 3 to FCP 7?
When i first recieved my SLR i transferred all my video to aperture 3, thinking it'd be easy to connect it to FCP 7...while it is, i realize the codec differences/it lagging when i try to edit the footage. it's frustrating! I've since realized that L
-
My Hyperlink button not working in FaceBook
I created a slide show and a link to my web site and to music site. When I upload the QT file to FaceBook, the buttons are there, but no link. David
-
Business Graphics : Display values for simple series ?
Hi , I have a some 5 simple series per category.. I am using a column chart . I would like to display the numerical values on top of each of the columns, ? How can i do it ? And is there any proper documentation on Business Graphics UI element other