Roll back an entire project, not individual files

Hi,
is there a way to restore an entire project to a certain date? I can do it for individual files but have not found a global function.
Normally when reaching major milestones we create a copy of the entire project anyway. So this is only relevant for rolling back shorter periods of time.
Robert

You can from your source control system (if it supports it, what it should). With TFS I just get a specific version of the project from Team Explorer. And with VSS I did the same: Open up the client and get the project from there.
Greet,
Willam

Similar Messages

  • When I hit the attach icon in mail I can select folders but not individual files

    When I hit the attach icon in mail I can select folders but not individual files

    Hmm....
    It all smells like third party software conflict.  Can you think of any candidates for third party stuff that interacts with mail, attachments, the file system?

  • Entire project not linked, can not find way to link clips in edited sequences

    I had a guy edit the video for me and I have his hard drive.  I copied everything over to my hard drive and opened the Premiere Pro project he used to edit the project.  Everything shows up, I can see the sequences and the edits.  But when I try to view his work, it simply says "Media offline."  I tried doing it through his hard drive, same thing.   Premiere Pro is not trying to automatically link the files the way I think it's supposed to do it, and I can't figure out how I'm supposed to do this.  When I'm in a sequence, whether I highlight a clip or not, the "Link" under the Project tab up top is grayed out.
    Any ideas?
    Thanks, Ron

    Yes, been there, done that.  It says what to link to, so I pick my project.  Then it's next error message is "File Format Not Supported."  These are .MTS video files that had already been used in Premiere Pro for the editing process.

  • Changing PodCast Thread Artwork, not individual file Artwork.

    Hello all
    I have recently uploaded a different picture. I have got the XML file pointing to the right address but the picture in iTunes remains the same old one.
    How can I fix this?
    Thanks

    I used something called the Podcaster RSS Buddy to make my XML file, it's a wizard where I just put in the info and it generates my file. When I ran it in that checker it was coming out with errors all over.
    Feedvalidator shows what's wrong.
    Check this:
    http://www.apple.com/itunes/podcasts/techspecs.html
    There are some errors which are possibly due to changes in the iTunes specs which Podcaster RSS Buddy evidently is not correcting, like this line:
    <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    Note that it's now supposed to be all lower case. The iTMS has an old file which still works, but the tags have been updated.
    Also the date tags are incomplete, they are missing the time zone part. They need to look like this:
    <pubDate>Mon, 20 Mar 2006 07:50:06 -0600</pubDate> or like this
    <pubDate>Mon, 20 Mar 2006 07:50:06 GMT</pubDate>
    It looks like Podcaster RSS Buddy is not working correctly for you. May I suggest trying Podcast Maker. It works quite well and does the tags for the iTMS correctly (I have no connection with them, I just tried it out. I do my own coding.) You can find it at http://www.potionfactory.com.
    Hope this answers your question.

  • Working with entire albums, not individual songs

    ... is this possible?
    I've installed iTunes 7 before deciding whether to buy an iPOD nano.
    I have a couple of hundred albums, too many to put all of them on a nano.
    I want to be able to select a whole album with one click, so with six clicks I can select six albums for syncronisation with the iPOD. I don't want to have to select each track (possibly 100+ clicks). Can I do this?
    A work around to this might be if the coverflow "mode" displayed only the songs in the selected album, or if a playlist was created for each album automatically, neither of which I can find options for. Am I missing something?
    As it stands at the moment I don't think I would get an iPOD. I want to take a different selection of albums with me every day but that doesn't seem to be what it's designed for...
    I'm sure I can't be the only person that wants to use it like this? Any help gratefully received.

    I want to be able to select a whole album with one click, so with six clicks I can select six albums for syncronisation with the iPOD. I don't want to have to select each track (possibly 100+ clicks). Can I do this?
    Well, I'm not sure that's the best way to go about adding songs to your iPod, but you can do it that way. Make a new playlist. It may help to double-click on that new playlist so that the playlist opens in a separate window.
    In the main iTunes window, select the main library and then put iTunes in browser mode (View..Show Browser). Select the albums you want by control-clicking in the list. Drag the selection to a playlist (or playlist window). All the songs for those albums will be added to the playlist.
    Then sync that playlist to your iPod. You can clear that playlist (or make another new playlist) and make new selections if that's what you want to do.

  • Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

    running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
    was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
    how do i get the program to save my work in progress, without finalizing it?
    thanks

    So, everything worked out just fine!
    I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy! 
    Time info: For about 120 GB of material the codec change process took 25 hours.
    Thanks for your help!
    Best
    *a

  • Data Services job rolling back Inserts but not Deletes or Updates

    I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
    I am not using the Transaction Control feature (because it just throws an error when I use it)
    My issue is as follows.
    Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
    But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
    And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or  what I'm doing wrong/what my misconception may be?
    Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
    If you require more information, please let me know.

    Hi Michael,
    Thanks for your reply. Here are all the options on my source table:
    My Rows per commit on the table is 10,000.
    Delete data table before loading is not checked.
    Column comparison - Compare by name
    Number of loaders - 1
    Use overflow file - No
    Use input keys - Yes
    Update key columns - No
    Auto correct load - No
    Include in transaction - No
    The rest were set to Not Applicable.
    How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
    I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
    I can also try using the Auto correct load feature.  I'm guessing "upsert" was a typo for insert? Where is that option?
    Thank you very much!
    Riley

  • When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  rein

    when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  reinstall   deleting files signing on with another account etc  nothing works   I have read this is an apple programing problem  if so is there a fix  I need iclouds  thanks

    This other discussion may help: Re: how do I install icloud

  • Messages not rolling back in JMS

    We got the following scenario
    PS->JMS BS->JMS PS->BS->External WS
    When external WS is down,we are expecting the message to roll back,but it is not happening.
    We are using OSB 10g.
    Tried following,
    http://atheek.wordpress.com/2011/04/21/transaction-handling-within-osb/
    But there seems no In Proxy Service Configuration –>Message Handling Configuration –>Check Transaction Required" in OSB 10g.We have done rest of the configs as per the link.
    Any help here please!

    When the web service is down, are you getting any http response (500, 503, 404 etc) from the service ? You can test using test console and check the value of $outbound in the trace. HTTP transport will rollback the message only if it doesn't get any http response from the invoked service. In 11g, to overide this and rollback the message even in case HTTP response is present, you need to mark the same transaction for response checkbox. I am not sure how to do this in 10g.
    In older alsb versions we need to set a certain command line property . This was discussed here : OSB JMS transaction
    You can check with support on what exactly you need to do in 10g.
    Edited by: atheek1 on 24-Jun-2011 02:54

  • Encore CS4 transcodes entire project for 1 exported sequence

    Hello All.  I am relatively new to Premiere Pro and Encore.  I'm using CS4 and have the following problem:  I have a Sequence in Premiere Pro that has 5 clips of roughly 1.5 mins each -- a total of 7.5 minutes.  If I export that sequence to Encore using the Dynamic Link function Encore transcodes the entire Project before burning the 5 clips to DVD.  Since the project has several hundred clips this transcoding takes about 1 1/2 hours.  If I import the 5 clips directly into Encore as Assets, it only transcode the 5 clips taking about 20 seconds each.  My question is why does Encore think it has to transcode the entire project and, more importantly, is there a way to change this behaviour.  Surely it should recognized that there are only 5 clips to burn and transcode only those.  Is there a setting I am missing?
    Thanks in advance!
    William

    Hi and thanks for the response.  The PP sequence settings are:
    Editing Mode: 1080i
    Timebase: 29.97 fps
    Pixel Aspect Ratio: Anamorphic 1080
    Fields:  No Fields (Progressive Scan)
    Display Format: 30fps Drop-Frame Timecode
    (I'm omitting the Audio settings)
    The properties for the clips are all the same(except for duration):
    Type: MPEG Movie
    File Size: 205.2 MB
    Image Size: 1440 x 1080
    Pixel Depth: 32
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;01;03;15
    Average Data Rate: 3.2 MB / second
    Pixel Aspect Ratio: 1.3333
    The transcode settings are the default (I key them in if it helps) for a DVD (not Bluray).
    i don't export it without using Dynamic Link.  The alternate method I used was to run Encore stand alone then create a new project (again default transcode settings) and I import the clips directly (File-Import As-Asset). 
    Something to note:  When I export the sequence from PP what gets shows up in the Encore project is:
    Name                                                  Type
    Demo_Seq/HDV1 Project.prproj        Timeline
    Demo_Seq/HDV1 Project.prproj         Premiere Pro Sequence
    When I click build what it says it's transcoding is: Transcoding HDV1 Project.prproj(Video).  This is the name of the entire project, not the sequence, and transcoding the entire project is consistent with the amount of time it takes.  When I import the individual clips it says it is transcoding Clip1, Clip2 ... and the amount of time it takes is consistent with transcoding only the individual clips.  It may also be noteworthy that after importing the sequence the individual clips are not present on the timeline looks as if it's a single clip.
    I hope this is what you needed.
    Thanks

  • Can you set a Cost Rate Table to be used for an entire project

    In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment.  In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level? 
    Thanks.

    Hi melduncan,
    Welcome to this Microsoft Project forum:)
    I assume you want project to have a default cost rate, so why not set the cost rate details into A to begin with,  You could then set this as a template from which you initiate all your new projects see FAQ
    Item: 8. New Project Template.   FAQs, companion products and other useful Project information can be seen at this web address: http://project.mvps.org/faqs.htm
    Hope this helps - please let us know how you get on :)
    Mike Glen
    MS Project MVP
    See
    http://tinyurl.com/2xbhc for my free Project Tutorials
    "" wrote in message
    news:[email protected]...
    In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment.  In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level? 
    Thanks.

  • Error message after downloading and install rolled back (using up data limit)

    error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

    Rhumsike which Adobe software or service are you trying to install?  Also which operating system are you using?  Finally what is the error message which you are receiving?

  • I can't attach individual files in e mail, only folders

    I can only attached folders in apple e mail and not individual files. Can anybody help?

    What happens when you try to attach files?

  • Transaction - the subprocess rolling back parent JTA

    According to Oracle documentation,
    "if the caller partner link specifies transaction=participate and the subprocess also specifies transaction=participate, the subprocess rolls back the client JTA transaction."
    But what I experience is if I just set transaction=participate for the partner link alone (and not having transaction=participate in the subprocess), when the subprocess rolls back, it rolls back parent JTA transaction also.
    In fact, if we have just transaction=participate for the partner link (and not having transaction=participate in the subprocess), then the rollback in either Parent or Subprocess, is rolling back both Parent and Subprocess.
    Can somebody provide the exact usage of using transaction=participate at the subprocess level?
    Thanks,
    Joe

    Joe,
    You are seeing expected behaviour. Even though both flags are called "transaction" and both are set to "participate", they do different things.
    By specifying transaction=participate on the partner link, you are instructing the subprocess to enlist in the transaction. When the subprocess starts, it will then enlist itself. That's all. Now if a rollback occurs, all participating processes will be rolled back.
    If you specify transaction=participate at the process level, it has a different effect, and doesn't affect whether or not the transaction is rolled back or not. As I said in the previous paragraph, if the partner link specified transaction=participate, the subprocess will roll back if a rollback is issued, no matter what other settings you have.
    So what effect does that setting have at the process level? According to the doc:
    When transaction=participate, the process produces a fault that is not handled by fault handlers, which calls the transaction to be rolled back.
    This is not exactly crystal clear, to me, anyway. In practice if this is set and your subprocess throws an unhandled fault, it triggers a rollback instead of throwing a fault as it normally would. This exception goes immediately back to the calling process since it is participating on the transaction as well.
    If the property is not set, and the subprocess throws an unhandled fault, you get the normal behavior. Namely, the process will be flagged as faulted, and the calling process will wait until it gets a transaction timeout (no relation to the JTA transaction we're talking about here).
    It's a simple test. Create two processes, then run it twice. Once with that property set, and one without.
    The key is to remember that although they are both called "transaction=participate", the effect they have is very different. It was probably not a good move to use the same name and value like that. Hope this helps.
    Regards,
    Robin.

  • I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?

    I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?
    Seems silly to not allow a rollback from a file repository of previous app versions.

    >All apps are tied to the account that downloaded it, so to be able to sync back the previous version you would need to still have your copy of that version
    I'm not sure I follow, I have not sync'd the ipad with my computer. I just saw an update in the app store and took it.
    I tried to del and install the app from the purchased tab in the app store, that reinstalled v2.1 of the app. This also fails to launch.
    I have made two service requests to the developer, no response at this time.
    Is there somewhere I can download and install Remote Files version 2 file? I can only find the new version 2.1 in the app store.

Maybe you are looking for