Roll Out points

Hi,
Our client is a sugar industry and they have recently started a new power plant using the Baggas(crushed cane). They want to create new company code as well as new purchasing organisation for the same. Could you please mention the points like pricing procedure,material types etc i need to keep in mind while preparing the blueprint. Please mention the things which should be keeping in mind while doing this roll out.Thanks in advance.
Warm Regards
VT
Edited by: VT on Jul 21, 2009 8:18 PM

Dear,
Its difficult to give you exact points to be considered basing on differences in business existed and expected requirements, but have a look at:
SAP Roll out
http://www.open.hr/hiz/hrusko/RolloutPresCASE3.pdf
Regards,
Syed Hussain.

Similar Messages

Belle Refresh Roll Out...

I know the Belle firmware update/refresh is being rolled out gradually, but does anyone know when the rollout is due to be completed?
I would expect by now that all Belle phones should have received the update but I haven't received anything yet.
I have also read about some new homescreen widgets for Belle users who have not yet received the Belle Firmware update, again I haven't received these.
Can anyone from Nokia (or elsewhere) tellme when I might receive one or both of thses updates please?
My phone is an N8 on the 02 network in the UK
Software version: 111.030.0609
Version Date: 2011-11-26
Custom Version: 111.030.0609.210.11
Custom Version Date: 2011-01-16

Hi Arkwright,
Sounds like if there will be a firmware update is being released for your product code, then it may be delayed as it hasn't been approved / worked on / tested by your network operator, O2. Your first point of call would be to contact O2 and ask if the Belle Refresh update will be made available for your N8. Failing that, it is best to contact your local Nokia Care point to ask about the availability of the update for your device.
http://nokia.com/support

Roll out project

Dear Friends,
As a MM consultant what are the points to be consider during roll out project pls explain in points wise points must be rewarded.
Regards
Amin

Dear friend,
i will give the essance, upto my knowledge..if anything wrong please correct.
Roll -out Project:
Extending the business functionality from corporate to its branch office.Example: You have main office in German and they implemented SAP.Also they have branch in India and want to implement in India.When implementing SAP in India office( having same company in corporate level and assigning a company code for India to the same company), you can say it's a roll out project.
Roll out example
IF client is on SAP and runing SAP
now he purchases new p-lant or set up new plant
then going on to sap for this new plant is roll out
IF client is on ECC5 and he want to go to laterast ecc6 or 7
then this project for ecc5 to ecc 6 is call upgrade
or conversion for non unicode to unicode client its also cale upgrade project
So roll out project means you have to copy what are all the things in the old plant configuration, that things you have to copy that in new plant code..
1.Company code is already maintained
2.give plant code
3.give storage location (how many storage location in new plant)
4.purchase organization for this new plant
5.Purchase group
6.if any ware house module is there you have to give the bin, rack and related shipping point and delivery point,sales org, sales channel.picking and packing.
7.pr number ranges, document type and output type
8.po number ranges and document type and output type for taking printout.
9 gr document number ranges and out put type and document type(mb90)
10. invoice screen config and output type.(mr90)
11.pricing procedure
12.plant settings both inventory and mrp related settings..(u have to ask this information from your client)
13.material master settings
14.vendr number ranges and related settings in account group
15.rfq and qutotation related settings..
16.if you have contract arrangement.then you have to give number ranges and document type and output type for taking printout
17.if consignment is there..same number ranges,document type and output type
18..if STO is there..u have to give related document type and output type and number ranges
19.
\if cin is ther,,,u have to define chapter id, delivery challan,TC,registers RG23A,RG23C,RG23D, and other 57fc and 5fAC sub-contracting challan.
You have to confirm information related to account determination and account postings
If production planning module is there, u have to confirm,.mrp and procurement informationbecause requirement is generated from mrp.
thanks and regards,
G.V.SHIVAKKUMAR
9894150275

Roll out methodology

Hi,
our clinet has SAP 4.7 installed in denmark. now there will be a roll out in norway. my question is what are all the steps in a roll out for norway.
1) business blueprint :- what steps will be there
2) enterprise structure. :- norway will have different sale sorg. can we have the same compnay code as denmark.
2) what all exisiting scenarios can be copied from denmark for norway. i mean to say if denmark has stock transfer, rush order, cash sale. do we only need to have sales scenaiors for norway too or can we have sale transactions different from denmark
3) can we use exisitng document types used in denmark for norway. for instance if denmark is using standard order type ZSTD, do we compulsory have to use ZSTD for norway too or we can use a different naming convention (like ZNOR) for norway. the reson iam asking this is beause in a roll out, i think enterprise structure/documen types are on the same lines and only tax treatment is differnt.
4) we have Z tables used in sd module. can we use the same z tables for making entires for norway considering the busines transaction is same or we have to use new z tables for norway.
my main confusion is a roll out follows the same template as of the main country as in denmark.... ??
can any body explain from practical view point.
regards
sachin

Hi there,
1) Business blue print is your understanding of the business process. It depends on any customized requirement for Norway.
2) Business should decide on weather they assign Norway to another coompany code. Accordingly you should define your org structure. Company code if defined by FI not SD.
3) Standard SAP transactions should be copied into Norway. Assign your order types & pricing, O/p, A/c determiantions to Norway sales area. Also maintain shiopping point & route determiantions for Norway. All the details to be provided by business.
4) Yes Z tables which are generic / transaction specific are not dependent on countries. You need to maintain them. Check if you need to develop any country specific codes.
Usually roll out proj will have the same functionility extended to other regions as well. So there may not be much change in the processs flow.
Check if there are any new condition types (taxes) / O/p types (shipping / invoice docs) required for Norway specific. Maintain them accordingly.
Regards,
Sivanand

Roll out Project systems

Hi,
Could you share with me regarding the main configurations and checks to be done while roll out the project in the point of Projects Systems(PS) module
Thanks
sudheer

Hi Sudheer,
Link: http://help.sap.com/
Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India -->
Topic: J12 - Project System
Here you will get both Configuration guide & Development master list
Also kindly visit following link
http://www.sapprojectsystem.com/
You can get reference material.
Regards
Tushar
P.S.Reward points if you find answer useful.

Roll in and roll out

hai
      what is rollin and rollout ?
      what is saint update?

Hi,
When users request for connection to the sap server, all the requests are put in a queue by the dispatcher. When the dispatcher finds a free workprocess, the user request is assigned to that work process on FIFO basis. Data input provided by the user are transfered to the memory area of the workprocess. The work process communicates with the database as per the requirement of the user querry and picks data from the database into its memory area and inturn returns it to the user.
    When the user terminates the connection the work process attached to it flushes its memory area and becomes free again to be assigned to another user request. This flow of data into the memory of the workprocess and flushing of data from the memory of the work process is known as roll-in and roll-out.We can say the rollin takes place at the begining of a user request and rollout takes place on termination of the same.
SAINT update:
saint update means applying a patch to enhance the functions of saint. This becomes necessary to accomodate the newer attributes of the new add-on support packages. Saint is mainly used for add-on tools.
Hope this clarifies your querry.
Pls dont forget to award points if solved.
Regards

Sap hr global roll out UK

Hi,
Our Company is implementing SAP HR in US and they want me to assit in roll out of SAP HR into UK.
Could some one tell me what are the neccessary steps that needs to be taken into consideration.
Ex: Do i need to prepare a separate template with diffirent company codes.
US has got diffirent benefits system
we are implmenting benefits and compensation in UK.
do we need to take care of global employment.
what kind of different templates do we need to prepare.
Many Thanks
Chinni

Hi,
These might be of help:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYGB/PYGB.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PABN/PABNXX.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PACM/PACM.pdf
Reward points if helpful,
Thank You,

Plant roll out details -- Urgent!!!!!!

Hi Peers
For a new Plant Roll Out (i.e) I have created a new plant for my company code what are the configs or customization that needs to be done from purely FI & CO side. Plz help me out with the answer. Its very urgent & important too.
Regards
Rajaram

Hi,
You has to look at these points-
1) You have to check whether plant is assigned to Company code.
2) If using Business Areas, you should assign BA to Plant in OMJ7
3) Extend Accounting views to the new plant
4) Any validation rules specfic to plants to derive BA's should be configured for this plant also.
5) If you use Plant as Profit Center, then you have to give the necessary profit center for the materials which are extended for this plant.
Thanks,
Raj

Roll-out Project Implementation

Hi Experts
In our Company SAP is implemented for Great Britain. Now they want to go for global implementation like USA, Denmark, Germany, Canada, Mexico etc. In that case, I have some doubts.
1.     Whether the same SAP package can be used for implementation for different countries, or do we have to purchase any new SAP package?
2.     Configuration has to be done separately for each country. Is it not?
3.     In case if we have to implement for two or three other countries code 99, how do we do?
4.     What are the other things that we have to take care?
Suitable answers will be rewarded with points.
Regards
Venu

Hi Buddy,
You need not purchase any seprate packages, if client wants you can you the same for the global roll out.
But you need to take care of the user licences.
2)You have to do the configuration for each country seprately, depending up on the client requirement.
3)In your case its almost like an implementation because when it come to module wise there all lot many client specific requirements will come in to picture.
Wish you good luck buddy
Regards'

Roll-out project implementation issue

Dear colleagues,
This issue might have already been turned up but couldn't find any related threads.
We have created our template project, set up the structure, added project documentations (11MBs converted to PDF ), training materials, everything seems to be ok here.
Now we have to create our first implementation project based on the template. Template is defined and is public (visible), Global Rollout Functionality is activated. The issue is, when we cretate the implementation project the structure is copied from the template, even the training materials can be seen in SOLAR02, but none of our blueprint documents are copied to the roll-out project.
Have you ever faced such situation before? Do you have any clue where to find the root cause of this?
thanks in advance for your replies
Szabolcs
Edited by: Szabolcs Dombó on Jul 17, 2008 1:26 PM

Hi,
Below mentioned is the details of using the SOLMAN for template rollout project. Hope this helps you.
The process of setting up and using the template in projects involves two or more individual projects. The first project is referred as "Master Project".
For Master project: Global Program Setup(Project Preparation)
- Create a master project. this must be of project type template since this will allow the packaging of reuse elements.
- Create the required number of templates(with in master project). At this stage, these templates are empty packages.
- Select standard scenarios as a starting point to build business scenarios in the master project, in the same way as for a normal project.
For Master project: Global Buisness Blueprint
- Detail standard scenarios to customer specific solution structure
- Assign template(s) at the scenario level of the customer specific solution structure
- Set global attributes to determine global/standard/harmonised/local processes
- Describe global business and technical requirement.
==========================================
Reuse of template at local rollout site
Project Preparation:
- Create a local "rollout" project. This can be either an implemetation project type or can itself be a template project type if you may need to reuse sections of this project in its own right.
- Select one or multiple templates and related scenarios in the scope tabbed page.
Note: there is no direct relationship between the templates choosen here. In other words you can attach tempalte form multiple other "master" projects, which may have no other relationship to one another.
Business Blueprint:
- The contents of the templates which have been attached to the "roll-out" project appears as elements of the project structure.
- Processes defined as global attributes with in the template area dopted wholesale with no changes.
- Adapt harmonised and local processes to local specific requirement(such as enhance process scope).
- Document local specific requirements of harmonised or local processes.
- Add further local specific structure elements as required and document.
Hope this help. Pls assign points.
Rgds
Manish

SAP Global Roll out-MM/WM

hi all.,
1. Working on a SAP Global Roll out project, can anyway educate me on the Pitfalls to avoid specifically in MM and WM configuration.
2. Also what are the areas to concentrate during configuration for Global Roll-out.
I have listed out a few points which i think is relevant, if there are others to be considered, do let me know.
a. Currency conversion between the different countries.
b. Time zone during Period/ Month closing
Much appreciated for your response/s.
Mahesh

Hi, Yogesh
I am sorry, I am not specifically aware of Thailand. While search in SDN, one thread was partially addressing the Thailand related need. But it is not giving much information. You may have a look at the link which I went through
Re: Country specific add ons to ECC 5.0
Regards,
Jagadeesh

Roll Out,EDI,ALE,IDOC,BAPI

HI FRNDS, HOW R U
would u plz send me about the ROLL OUT means,
what is mean of EDI,ALE,IDOCs&BAPI.
what is the difference of these things& what is the use of these things
thank u
with regards
nagesh

Hi
Roll out- Same client is having business in different countries.Instead of customizing again for the countries, we can copy the customizing from the parent country and configure all related to the country specific settings.
EDI-Electronic Data Interchange (EDI) is about doing business and carrying out transactions with your trading partners electronically. EDI covers most things that are traditionally done using paper-based communication.
ALE-ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
BAPI -BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
IDOC-IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
Assgn points if useful.
Regards
Vardhini

Rolling out updates automatically to clients?

Hi all,
I am curious other than JNLP/WebStart which we will not be using, how anyone has automated the process of updates to clients? In our case, we have a central JBoss j2ee server. We may need to update the code at some point, roll out new mbeans, etc. We also need to update each client that connects to it. In fact, our clients run a java service that every 5 minutes connects to the J2EE server to check if any updates of data exist for it to handle. What we want to know is if its possible to roll out an update automatically in some manner such that the jave service can shut down, be updated, then restarted? Has anyone done something like this?
Thanks.

Hi Pal. I have visited your other thread talking about the classloader thing.
I am interested in knowing that.. i know this is not the right place. I was looking for your emailID but cudnt actually find it.
What i want to know is :
I am running one webApp on Weblogic Application Server. I want to trace all the activities happening thru that application like, which class is being calle now, which method of which class, what heap memory, memory leaks etc and the SQL Queries being processed through JDBC.
I am trying to look for the solutions thru various ways. I am interested in knowing thru ClassLoader concept. Is it possible to trace all the classloaders in the runnung APP server or?? can we make one Classloader which can act parent to all the classloaders etc. I mn how can i proceed about it.
If doing such thing is possible can u guide me to a proper Address ? or you can help me with something.
Let me know.
[email protected]
Ravi Pal

Why changing clip's in/out points leaves gap in timeline?

When I change a clip's in/out points in the viewer, it leaves a gap in the timeline (while preserving the overall duration of the sequence).
Is there any way to change the in/out points so that there won't be a gap (adjacent clips move next to changed clip). I've tried the overwrite edit. Do I need to use the ripple or roll delete tool? If so, how would I do it?
Thanks!

I really don't want to get into a snitching match here. < </div>
Doh! Too late. You can contribute to the thread but trying to point out flaws in DH and Shane posts is a waste of time. You can take shots at me all you want, I just pretend to be in their league, that's my job around here.
learn how FCP works and you will be a happy camper. < </div>
The surprise for newbies is that FCP is remarkably deep and complex. It comes with 2000 pages of manuals. Thinking it should or will behave like any other application you've ever known, including other video apps, is silly.
bogiesan

Prelude not creating In/Out points when ingesting P2 footage

I'm working on a Windows 7 (64bit) machine and I'm ingesting footage off of a P2 card reader (connected via usb). In the Ingest panel I marked In/Out points on several P2 files using "I" and "O" keyboard shortcuts. I ingested the footage with the transfer options set to transfer to a new directory on the hard drive (no transcode) with the verify transfer checked. The files seemed to transfer fine and they showed up in the Project panel. When I played them in the monitor I discovered that the In/Out points I set prior to the ingest were ignored.
Prior to ingesting the P2 footage I ingested some AVCHD footage with a transfer and transcode to P2 Movie. In that case the in/out points that I added in the ingest panel were respected when I played them back in the monitor after the ingest.
So, does the setting of in/out point in the ingest panel only take effect if you are transcoding footage?

Current input suggests creating subclips would be acceptable. So the net result you would see in the project panel after ingesting a clip with In/Outs set would be a master clip (representing the full clip) and a subclip representing the In/Out range specified.
Is this what you would also expect?
Michael,
Thanks for your quick response. Yes, making subclips makes sense...although I guess I don't see much advantage of creating subclips prior to ingest vs after...especially when after ingest you can establish multiple subclips on one master clip. On this specific project I had lengthy pre and post roll on several shots which I was hoping to eliminate by setting in/out points prior to ingest - so that after injest I would have only clips with relavant action.

Roll Out points

Similar Messages

Maybe you are looking for