Root.sh is falling in Node2 while clusterware installation
Hi Friends,
I am trying to install Oracle 11gr2 cluster ware on Linux RHEl 5..when running root.sh on second node getting with below error.
[root@uidl1DR-test-02 ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1016.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
can you please guide me on this.
Thanks & Regards
Prasanth
Which version is it exactly? 11.2.0.1? 11.2.0.3?
It makes a huge difference.
Also you should consult the logfiles, which are written, to see the root cause for this error. With this you may be able to find out more.
The root.sh just tells you it could not start. But it does not tell you why (the logfiles however will tell you why).
Also have you looked at MOS? You will find loads of informations on this.
This could well be a network setup (e.g. firwall, SE Linux, or even switch problem).
Regards
Sebastian
Similar Messages
-
Root.sh fails on second node during clusterware installation
I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html -
Root.sh failed on second node while installing CRS 10g on centos 5.5
root.sh failed on second node while installing CRS 10g
Hi all,
I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
user on second node of the cluster, it fails with following error message:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
and run cluvfy stage -post hwos -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking shared storage accessibility...
Disk Sharing Nodes (2 in count)
/dev/sda db2 db1
and run cluvfy stage -pre crsinst -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
No checks registered for this product.
and run cluvfy stage -post crsinst -n all -verbose,it show message:
Result: Node reachability check passed from node "DB2".
Result: User equivalence check passed for user "oracle".
Node Name CRS daemon CSS daemon EVM daemon
db2 no no no
db1 yes yes yes
Check: Health of CRS
Node Name CRS OK?
db1 unknown
Result: CRS health check failed.
check crsd.log and show message:
clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
clsssInitNative: connect failed, rc 9
Any help would be greatly appreciated.
Edited by: 868121 on 2011-6-24 上午12:31Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
Public IP addresses and virtual IP addresses must be in the same subnet.
In your case, you are using two different subnets for the VIPs. -
Silent Clusterware Installation Question
Hello -
I am attempting to run a silent installation of Clusterware. I am installing on Linux, and here is part of my script:
/oracle_software/11g_clusterware/clusterware/runInstaller -silent -responseFile \
$ORA_SCRIPTS/RAC_installation_pckg/crs.rsp
However, I want the above process to finish in the script before going to the part of my script that runs the root commands for the installation. Currrently, the call to the command itself completes, and then the script goes to the part to run the root commands, while the above installation is still running. How can I get it to only call the root commands after the Clusterware installation has completed? Can I make use of wait command in my Linux script?
Any help or insight is greatyly appreciated!
Thanks,
Mike1. make SSH user equivalance for root user on RAC1 and RAC2 hosts
2.
login as root
root@RAC1 #./run.sh
scripts are:
########run.sh#######
./rac.sh &
./search.sh &
####END############
##### rac.sh #############
#!/bin/bash
su - oarcle
/oracle_software/11g_clusterware/clusterware/runInstaller -silent -responseFile $ORA_SCRIPTS/RAC_installation_pckg/crs.rsp >>/tmp/out
###END ###################
######### search.sh #########
#!/bin/bash
for ((a=1 ; a <= 1000 ; a++ ))
do
egrep '/u01/crs/oracle/product/10.2.0/cr/root.sh' /tmp/out>dev/null
if [ $? -eq 0 ]
then
/u01/app/oracle/oraInventory/orainstRoot.sh
ssh RAC2
/u01/app/oracle/oraInventory/orainstRoot.sh
exit
/u01/crs/oracle/product/10.2.0/cr/root.sh
ssh RAC2
/u01/crs/oracle/product/10.2.0/crs/root.sh
exit
break
fi
sleep 60
done
########END ######################
Please try this one ...
Thanks,
VIJAY -
FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0. -
Clusterware installation 10.2.0.1
Hi!
I have trouble with clusterware installation.
I use two VM's with Centos 5.3
./vipca
/u01/app/oracle/product/10.2.0/crs/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Then I marked out this lines in vipca -->
#Remove this workaround when the bug 3937317 is fixed
# arch=`uname -m`
# if [ "$arch" = "i686" -o "$arch" = "ia64" ]
# then
# LD_ASSUME_KERNEL=2.4.19
# export LD_ASSUME_KERNEL
# fi
#End workaround
Now I got this problem:
./vipca
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
How do I fix my problem?
Regards
Kenthanks!
I runned: ./cluvfy stage -pre crsinst -n all -verbose
...I got alot more which passed the test.. I only list up what went wrong. I have to look after this packets.
Check: Package existence for "compat-gcc-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-gcc-c++-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-libstdc++-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "compat-libstdc++-devel-7.3-2.96.128"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
Check: Package existence for "openmotif-2.2.3"
Node Name Status Comment
vitoratest002 missing failed
vitoratest001 missing failed
I will find the lost packets and install them. Im sure i will be back later to post some new problems with my installation. :)
Thanks so far!
Regards
Ken -
Vip issue on clusterware installation on 10.2.0.4.0 in aix 5.3
Dear all,
we are facing vip issue after clusterware installation on 10.2.0.4.0 version as crs_stat showing all online but when we fire ifconfig all vips come into one node pls find output for your information
NODE 1":--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172..xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1..xxxxxxxx netmask 0xffffff00 broadcast 1..xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast .xxxxxxxx
inet6 ::1/0
bash-3.2#
bash-3.2# ./crs_stat -t
Name Type Target State Host
ora....cl2.gsd application ONLINE ONLINE ibm-...-cl2
ora....cl2.ons application ONLINE ONLINE ibm-...-cl2
ora....cl2.vip application ONLINE ONLINE ibm-...-cl2
ora....cl1.gsd application ONLINE ONLINE ibm-...-cl1
ora....cl1.ons application ONLINE ONLINE ibm-...-cl1
ora....cl1.vip application ONLINE ONLINE ibm-...-cl2 ------ node 1 vip show in node 2
NODE 2 :--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1.xxxxxxxx netmask 0xffffff00 broadcast 1.xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.xxxxxxxx netmask 0xff000000 broadcast 127.xxxxxxxx
inet6 ::1/0
pls help any one facing same issueYour Node1 VIP was migrated to Node2 due to a failure of some kind. The VIP does not always come back automatically:
http://blogs.oracle.com/bcndatabase/entry/on_rac_vip_failback
Iordan Iotzov
http://iiotzov.wordpress.com/
Edited by: Iordan Iotzov on Sep 19, 2011 7:55 AM -
Core file dumping after clusterware Installation
I am installing 11gR1 RAC on RHEL5.5 64 bit
I have completed the clusterware installation successfully
after the installation some core files in the format (core.ons.25383) are getting dumped and filling up the /tmp/cores filesystem henceforth / filesystem .
I am not able to proceed further with the database installation .
my cluster status looks like this
[root@dbn-1 bin]# ./crs_stat -t
Name Type Target State Host
ora.dbn-0.gsd application ONLINE ONLINE dbn-0
ora.dbn-0.ons application ONLINE ONLINE dbn-0
ora.dbn-0.vip application ONLINE ONLINE dbn-0
ora.dbn-1.gsd application ONLINE ONLINE dbn-1
ora.dbn-1.ons application ONLINE ONLINE dbn-1
ora.dbn-1.vip application ONLINE ONLINE dbn-1
even then core files are being dumped .
I am using raw devices for ocr and voting discs .Hi;
For your issue i suggest close your thread here as changing thread status to answere and move it to Forum Home » Grid Computing » Real Application Clusters or Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios -
Error while creating installer
Hi
I am getting error while creating installer.. I tried all posible ways.. Re -installing Labview will give solution.
Currently i am using LV8.0
Thanks,
GaneshHello.
Could you tell us more about this error please? Could you attach a screen of it?
Thanks.
Regards.
Romain D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
NIDays 2010 : Conférence mondiale de l'instrumentation virtuelle
>>Détails et Inscription<< -
Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?
The full message reads: "Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click finish to exit the installer."
I have run it again and get the same message. Have rebooted and tried again. Same results. -
Old Mac died. Have PE 9 and while it installs I get a licensing problem I have the original discs and the serial. How do I fix this? I don't need the new version and I just want to use what I have already paid for. Error 213:5
Did you migrate over the data from your old computer? If so, there's probably something you brought over that knows it's not on the same hardware as before. In that case you need to run this:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
and then go around and manually remove all the bits and bobs, not just from applications but also from hard drive>library>application support>adobe and from your username>library>preferences. Spotlight will not help you. You have to go looking on your own.
If that's not it--you just a message that you've used up your activations, you need activation support:
Activation & Deactivation Help
Start a chat session and they can get you straightened out. -
Root.sh failed/stucked on node2
hi All,
I am deploying 2 node rac 11g on AIX 6.1.
After successful installation of clusterware software, I have executed root.sh on node 1 and it was successful. But while trying to run the root.sh script on node 2, i am getting following error.
First time i executed the root.sh script was halt at
Setting the permissions on OCR backup directory
Setting up Network socket directories
I waited for some time around 30 min and then killed the session and tried to rerun the root.sh script and this time it failed with following errors:
Setting the permissions on OCR backup directory
Setting up Network socket directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
I have checked the processes running on remote node with following command:
ps -ef
it has shown following processes running after we executed the root.sh command:
root 164218 193000 0 15:47:28 pts/0 0:00 /bin/sh /u01/app/crs/11.1.0/crs/install/rootconfig
root 193000 184778 0 15:47:27 pts/0 0:00 /bin/sh ./root.sh
root 217504 164218 0 15:47:30 pts/0 0:00 /u01/app/crs/11.1.0/crs/bin/ocrconfig.bin -upgrade oracle oinstall
I was checking the disks ownership and want to share that with you also.
initially i executed following commands to give ownership/permission for oracle user.
chown oracle:oinstall rhdisk22
chown oracle:oinstall rhdisk23
chmod 660 rhdisk22
chmod 660 rhdisk23
# more /etc/oracle/ocr.loc
ocrconfig_loc=/dev/rhdisk22
ocrmirrorconfig_loc=/dev/rhdisk23
local_only=FALSE
however after executing of root.sh on node 1 and node 2, i have checked the disks ownership has been changed to root.
ls -ltr /dev/rhdisk22 /dev/rhdisk23
node1:
# ls -ltr /dev/rhdisk22 /dev/rhdisk23
crw-r----- 1 root oinstall 21, 23 Apr 29 15:43 /dev/rhdisk23
crw-r----- 1 root oinstall 21, 22 Apr 29 15:43 /dev/rhdisk22
node2:
# ls -ltr /dev/rhdisk22 /dev/rhdisk23
crw-r----- 1 root oinstall 20, 21 Apr 29 13:08 /dev/rhdisk23
crw-r----- 1 root oinstall 20, 19 Apr 29 13:08 /dev/rhdisk22
similarly following is the result from ocrcheck commands.
node1:
# ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 614156
Used space (kbytes) : 316
Available space (kbytes) : 613840
ID : 604081339
Device/File Name : /dev/rhdisk22
Device/File integrity check succeeded
Device/File Name : /dev/rhdisk23
Device/File integrity check succeeded
Cluster registry integrity check succeeded
node2:
# ./ocrcheck
PROT-602: Failed to retrieve data from the cluster registry
can any one help me please.
regards
FarooqThis may not be applicable directly but check if metalink note 330234.1 helps here.
-
11gR2 clusterware installation problem on root.sh script on second node
Hi all,
I wanna install the *11gR2 RAC* on ORA-Linux 5.5 (x86_64) using VMware server but on the second node i get two "*failed*" at the end of root.sh script.
After that i try to install DB but ı can see only one node.What is the problem...
I will send the output, ı need your help.
Thank you all for helping..
Hosts file:(we have no ping problem )
[root@rac2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.101 rac1.localdomain rac1
192.168.2.102 rac2.localdomain rac2
# Private
192.168.0.101 rac1-priv.localdomain rac1-priv
192.168.0.102 rac2-priv.localdomain rac2-priv
# Virtual
192.168.2.111 rac1-vip.localdomain rac1-vip
192.168.2.112 rac2-vip.localdomain rac2-vip
# SCAN
192.168.2.201 rac-scan.localdomain rac-scan
[root@rac2 ~]#
FIRST NODE root.sh script output...
[root@rac2 ~]# /u01/app/11.2.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:45:06: Parsing the host name
2010-12-06 14:45:06: Checking for super user privileges
2010-12-06 14:45:06: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 587cc69413ce4fd3bf0c2c2548fb9017.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 587cc69413ce4fd3bf0c2c2548fb9017 (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac2'
CRS-2677: Stop of 'ora.crsd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac2'
CRS-2677: Stop of 'ora.asm' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac2'
CRS-2677: Stop of 'ora.ctssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac2'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac2'
CRS-2677: Stop of 'ora.cssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac2'
CRS-2677: Stop of 'ora.gpnpd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac2'
CRS-2677: Stop of 'ora.gipcd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac2'
CRS-2677: Stop of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac2'
CRS-2676: Start of 'ora.evmd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac2'
CRS-2676: Start of 'ora.DATA.dg' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.registry.acfs' on 'rac2'
CRS-2676: Start of 'ora.registry.acfs' on 'rac2' succeeded
rac2 2010/12/06 14:52:06 /u01/app/11.2.0/db_1/cdata/rac2/backup_20101206_145206.olr
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 6847 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac2 ~]#
SECOND NODE root.sh script output
[root@rac1 db_1]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:54:11: Parsing the host name
2010-12-06 14:54:11: Checking for super user privileges
2010-12-06 14:54:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
Successful addition of voting disk 2761ce8d47b44fbabf73462151e3ba1d.
Successfully replaced voting disk group with +DATA.
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 2761ce8d47b44fbabf73462151e3ba1d (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac1'
CRS-2677: Stop of 'ora.crsd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac1'
CRS-2677: Stop of 'ora.asm' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac1'
CRS-2677: Stop of 'ora.ctssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac1'
CRS-2677: Stop of 'ora.cssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac1'
CRS-2677: Stop of 'ora.gpnpd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac1'
CRS-2677: Stop of 'ora.gipcd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac1'
CRS-2677: Stop of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac1'
CRS-2676: Start of 'ora.evmd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac1'
CRS-2676: Start of 'ora.DATA.dg' on 'rac1' succeeded
PRCR-1079 : *Failed* to start resource ora.scan1.vip
CRS-5005: IP Address: 192.168.2.201 is already in use in the network
CRS-2674: Start of 'ora.scan1.vip' on 'rac1' *failed*
CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
start scan ... *failed*
Configure Oracle Grid Infrastructure for a Cluster ... *failed*
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 6847 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac1 db_1]# * "./runcluvfy.sh stage -pre -crsinst -n rac1,rac2 " outputs are same each node....*
[oracle@rac2 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac2"
Checking user equivalence...
User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Node connectivity passed for subnet "192.168.2.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.2.0"
Node connectivity passed for subnet "192.168.122.0" with node(s) rac2,rac1
TCP connectivity check failed for subnet "192.168.122.0"
Node connectivity passed for subnet "192.168.0.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.0.0"
Interfaces found on subnet "192.168.2.0" that are likely candidates for VIP are:
rac2 eth0:192.168.2.102 eth0:192.168.2.112 eth0:192.168.2.201
rac1 eth0:192.168.2.101 eth0:192.168.2.111
Interfaces found on subnet "192.168.122.0" that are likely candidates for a private interconnect are:
rac2 virbr0:192.168.122.1
rac1 virbr0:192.168.122.1
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect are:
rac2 eth1:192.168.0.102
rac1 eth1:192.168.0.101
Node connectivity check passed
Total memory check passed
Available memory check passed
Swap space check passed
Free disk space check passed for "rac2:/tmp"
Free disk space check passed for "rac1:/tmp"
User existence check passed for "oracle"
Group existence check passed for "oinstall"
Group existence check passed for "dba"
Membership check for user "oracle" in group "oinstall" [as Primary] passed
Membership check for user "oracle" in group "dba" passed
Run level check passed
Hard limits check passed for "maximum open file descriptors"
Soft limits check passed for "maximum open file descriptors"
Hard limits check passed for "maximum user processes"
Soft limits check passed for "maximum user processes"
System architecture check passed
Kernel version check passed
Kernel parameter check passed for "semmsl"
Kernel parameter check passed for "semmns"
Kernel parameter check passed for "semopm"
Kernel parameter check passed for "semmni"
Kernel parameter check passed for "shmmax"
Kernel parameter check passed for "shmmni"
Kernel parameter check passed for "shmall"
Kernel parameter check passed for "file-max"
Kernel parameter check passed for "ip_local_port_range"
Kernel parameter check passed for "rmem_default"
Kernel parameter check passed for "rmem_max"
Kernel parameter check passed for "wmem_default"
Kernel parameter check passed for "wmem_max"
Kernel parameter check passed for "aio-max-nr"
Package existence check passed for "make-3.81"
Package existence check passed for "binutils-2.17.50.0.6"
Package existence check passed for "gcc-4.1.2"
Package existence check passed for "libaio-0.3.106 (i386)"
Package existence check passed for "libaio-0.3.106 (x86_64)"
Package existence check passed for "glibc-2.5-24 (i686)"
Package existence check passed for "glibc-2.5-24 (x86_64)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (i386)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"
Package existence check passed for "elfutils-libelf-0.125 (x86_64)"
Package existence check passed for "elfutils-libelf-devel-0.125"
Package existence check passed for "glibc-common-2.5"
Package existence check passed for "glibc-devel-2.5 (i386)"
Package existence check passed for "glibc-devel-2.5 (x86_64)"
Package existence check passed for "glibc-headers-2.5"
Package existence check passed for "gcc-c++-4.1.2"
Package existence check passed for "libaio-devel-0.3.106 (i386)"
Package existence check passed for "libaio-devel-0.3.106 (x86_64)"
Package existence check passed for "libgcc-4.1.2 (i386)"
Package existence check passed for "libgcc-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-4.1.2 (i386)"
Package existence check passed for "libstdc++-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)"
Package existence check passed for "sysstat-7.0.2"
Package existence check passed for "unixODBC-2.2.11 (i386)"
Package existence check passed for "unixODBC-2.2.11 (x86_64)"
Package existence check passed for "unixODBC-devel-2.2.11 (i386)"
Package existence check passed for "unixODBC-devel-2.2.11 (x86_64)"
Package existence check passed for "ksh-20060214"
Check for multiple users with UID value 0 passed
Current group ID check passed
Core file name pattern consistency check passed.
User "oracle" is not part of "root" group. Check passed
Default user file creation mask check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Clock time offset check passed
Clock synchronization check using Network Time Protocol(NTP) passed
Pre-check for cluster services setup was successful.
[oracle@rac2 grid]$ I'm confused :)
Edited by: Eren GULERYUZ on 06.Ara.2010 05:57Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian -
Hi,
root.sh scripts is hanging when installs 10g clusterware(10.2.0.1).
$./orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
$./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Hangs
Thanks,There is a note available in Metalink.. 416100.1 Have a look at it..
This is symptom where there is a discrepency in the hostnames in CRS installation. -
Clusterware Installation: Start OracleCSService on Node2
Hello,
My problem is the following:
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
node2 service OracleCSService in improper PENDING state, err(997)
The OracleCSSerivce doesn't start at the remote machine. Even if I try to start it manually, it never gets out of the status "Is starting...". I searched the internet for that problem, too, but found nothing on that. I enabled automount, I even added the registry value "DisableDHCPMediaSense". Nothing helps. :-( Since there is no way to skip this configuration process at the Installation, I'm hanging there.
I hope somebody can help me on this!
Thanks in advance.The device names are on both nodes the same. It's running on a Windows 2003 Server VMWare (used this Tutorial: http://www.databasejournal.com/features/oracle/article.php/3564846).
The strange thing is, on Node1, where I started the Installation routine, the OracleCSService service is starting without any problems.
I checked the log files:
($ORA_CRS_HOME/log/Node2/cssd/cssdOUT.log)
08/06/07 09:43:33 ssmain_run_css: boot check returned 8, looping
08/06/07 09:43:34 ssmain_run_css: launching boot check 362 with c:\oracle\product\10.2.0\crs\bin\crsctl.exe check boot
Failure in CSS initialization opening OCR.
08/06/07 09:43:35 ssmain_run_css: boot check returned 8, looping
08/06/07 09:43:36 ssmain_run_css: launching boot check 363 with c:\oracle\product\10.2.0\crs\bin\crsctl.exe check boot
Failure in CSS initialization opening OCR.
And so on...
Something goes wrong with this boot check and I don't know what. All Disks are visible.
I also found some trouble in the following log file.
($ORA_CRS_HOME/log/Node2/client/clsc.log)
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2007-08-06 09:47:36.781: [ COMMCRS][948]clsc_connect: (00B21070) no listener at (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61003))
2007-08-06 09:47:37.984: [ COMMCRS][948]clsc_connect: (00B21070) no listener at (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61261))
2007-08-06 09:47:37.984: [ default][948]Terminating clsd session
2007-08-06 09:53:29.734: [ COMMCRS][3904]clsc_connect: (00B214A0) no listener at (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=61003))
2007-08-06 09:53:29.734: [ default][3904]Terminating clsd session
Could this be the problem? If yes, what should I do? Because those errors do not appear on Node1, too. Like the other error "boot check".
Maybe you are looking for
-
Emails from my Blackberry are getting trapped by spam filtering
It's not a consistent thing, which makes this more aggravating, but I have my work email set up on my Storm (9530), and many times, when I reply to an email that involves my co-workers, my emails get trapped by our online spam filtering. Both my wor
-
Hi friends, I have to get the field butxt 'vendor description' based on the vendor number lifnr. Can u tell me from which table i should get the vendor description, as i have the vendor number lifnr. Regards, Line
-
Hi all good morning. can we write a stored procedure that loads a file into the table using sql loader? can Java call the above stored procedure? regards raj Edited by: user10887630 on Apr 23, 2009 6:18 AM
-
Can we print images using FOP by taking it from the database ? Iam using the FOP and outputing to a PDF. However, I have an image that I would like to print. The image is stored in the database as a BLOB. How can I print this image in the PDF documen
-
I have just bought Adobe Classroom in a book to learn Premiere Elements 9, but I've hit a brick wall in the first chapter. The instruction is to launch Organizer and choose File>Get Photos and Videos>From Files and Folders. However when I launch Org