Route is not getting updated in billing

Hi all,
I have a freight condition type which is having the key combination of plant & Route (werks/route). we give route manually in the delivery document header but it is not getting updated in billing item and because of that billing item is not picking the condition records.
My copy controls from LF > F8 Header 009 and item 010 maintained.
Please give your valuable inputs to resolve this
Regards

As I know there is no field for Route or for transportation in Invoice.
I suggest you to consider trying routine based pricing for the same.
Also,for understanding refer following link:
- how to redetermine pricing value in invoice?
- SD / Pricing Condition / Route Based
Thanks & Regards
JP

Similar Messages

  • Billing due list not getting updated-deliver realted billing

    Hello,
    I am carrying out delivery related billing in CRM.
    When i make an order in CRM and carry out the  Goods movement (Post goods issue) and delivery in ECC,the document flow is getting updated in CRM.However,the billing due list is not getting updated.that is it does not show the delivery document to be billed.
    Is there something missing?
    Please advice
    Thanks
    Itty

    Hi Naresh,
    Can you please try to debug in the badi "CRM_UPLOAD_BEA_FILL " after saving the service order.
    (May be i think there may be some custom implementations in this badi where it checks  some conditions to be met were getting failed which results in  not generating of billing due lists).
    Thanks & Regards,
    Vishnu.

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

    Dear Experts,
    Our scenario is MTO with valuated material.
    1. Production order is tagged to Sales Order.
    2. Production order is settled to Material and variance is getting posted to COPA.
    3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
    4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
    5. We  are not executing WIP. (as per Business process)
    6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
    I am facing the following issues in the above MTO process.
    1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost.  Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
    2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
    Please help me how to resolve the above issues.
    Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA  (at the time of Billing)
    Regards,
    vgl
    Edited by: vglokam on Aug 31, 2010 10:52 AM
    Edited by: vglokam on Aug 31, 2010 10:54 AM

    Hi
    1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
    In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
    2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
    1. Go to KEI1, Select your PA transfer structure...
    2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
    3. In the Tab "Value Field" below "source", assign Qty Field
    Now when you settle, it should update qty as well
    regards
    Ajay M

  • Letter of Credit Financial Document not getting updated

    Hi,
    I have create a Letter of Credit Financial Doc thur TCode Vx11n. I create a sales order & assigned the financial document to sales order. In log there is no error.
    When I create a Billing Doc & Excise Invoice. The Financial Document values remain same & does not get updated. Please guide.
    Thanks in advance.
    Regards
    Mahi

    Hi Gopala,
    The accounting document has already been released &accounting doc has been created. But the value of Financial Doc i.e Letter of Credit remains same.
    Regards,
    Mahendra

  • Excise table J_1IEXCDTL not getting updated with Excise Base value.

    Hi All,
    The the field EXBAS of table J_1IEXCDTL is not getting updated for ETT (Transaction Type) DLFC.
    For other transaction types, the same is getting populated.
    Is there a setting for controlling the same?
    If yes, can you please guide me.
    Best Regards
    Debaditya Ghosh

    First you should ensure that it is flowing in your billing document.  If so, automatically, it will also flow in your excise invoice and the field EXBAS will be updated accordingly.
    From your comments, it seems, the amount is not flowing in your billing document and excise invoice.  If so, ensure that you have assigned  the correct tax code in FV11 for your ED condition type.
    thanks
    G. Lakshmipathi

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • Table J_1iexcdtl not getting updated?

    Hi,
       I m facing a problem while creating excise invoice
    the header table that is J_1iexchdr is getting updated
    but the excise detail table J_1iexcdtl is not getting
    updated.
      Pls help.
    Regrds

    First you should ensure that it is flowing in your billing document.  If so, automatically, it will also flow in your excise invoice and the field EXBAS will be updated accordingly.
    From your comments, it seems, the amount is not flowing in your billing document and excise invoice.  If so, ensure that you have assigned  the correct tax code in FV11 for your ED condition type.
    thanks
    G. Lakshmipathi

  • KONV not getting updated with new condition type value

    Hi,
    I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
    Thanks
    Shweta

    Hi Vasu,
    It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
    Thanks,
    Shweta

  • On reversal of Invoice the table BKPF not getting updated properly

    Hi
    I have an issue, that when we create the Commercial Invoice, accounting document generated automatically. And after that due to some reason when we reverse the same through  VF11, the accounting document which was created while doing the invoicing not getting updated by "reversed with (STBLG)" field and "reversal Indicator (XREVERSAL) field in the table BKPF.
    However when I test the some scenario in Development and Quality server the same field is getting updated.
    I have already checked the Billing Document Type of SD and accounting document type but found everything in place.
    I am unable to get what is missing,and why this is happening in Production server only.
    Need your input at the earliest.
    Thanks in advance
    Regrads
    AA

    Hi
    thanks to all for their suggestion, the issue resolved with the help of SAP.
    For the forum members information :-
    This is standard system behaviour.
    BKPF-XREVERSAL is only populated/filled in the reversed original
    and in the reversal FI document if BKPF-STBLG and BKPF-STJAH
    are populated/filled in reversed original and reversal FI document.
    BKPF-STBLG and BKPF-STJAH are only populated/filled in reversed
    original and reversal FI document if the new/real cancellation
    procedure (-> with automatic clearing of the open items) is executed,
    and the new/real cancellation procedure is not executed, if an
    open item of the original, to be reversed FI document, has already
    been cleared (-> also see note 309208).
    Regards
    Amitesh Anand
    Edited by: AA on Apr 25, 2009 11:37 AM

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

  • Tax is not getting updated in Sales Order Pricing Conditions

    Hi ,
    Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
    Following are the changes for in the standard Pricing:
    1) Created ZPSC condition type to calculate the sur-charge from Z-table
    2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
    So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
    We implemented the logic for updating values of  Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
    I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
    Please suggest how to update the Tax values correctly without manual update.
    Thanks ,
    Rajesh Sanapala.

    Hi Lakshmi,
    I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
    I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
    Thanks
    Ivy

  • Data is not getting updated in CRM

    HI experts,
    I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
    why this is happening?
    Is there any BDOC used in this case then how we can check that BDOC?
    Thanks,
    Jassi

    Hello
    I am sure that the problem occurs due to this.
    You need to know the error message. To do this:
    1) Choose any red document from transaction SMW01
    2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
    3) In the opening window there is a button "Errors". There is where you can find the error message.
    I hope it helps. Please, provide points if helpful.
    Joaquin

  • Data is not getting updated in table using RFC

    Hi Experts,
    In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
    Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
    Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
    Regards,
    Sari

    HI Sari,
    as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
    -- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
    -- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
    Thanks,
    Bhupesh

Maybe you are looking for