Router 3745 itself breaks in many lines (30 modems mica-K56flex)
Help me please
A have router 3745 with 30 modems mica-K56flex.
line 97 126
exec-timeout 0 0
no flush-at-activation
modem InOut
modem autoconfigure type mica-K56flex
transport input all
transport output all
autoselect during-login
autoselect ppp
line 129 158
exec-timeout 0 0
no flush-at-activation
modem InOut
modem autoconfigure type mica-K56flex
transport input all
transport output all
autoselect during-login
autoselect ppp
in few days lines is break :
line 97
exec-timeout 0 0
timeout login response 0
no flush-at-activation
modem InOut
modem autoconfigure type mica-K56flex
data-character-bits 8
exec-character-bits 8
special-character-bits 8
length 0
width 0
no history
no editing
transport preferred none
transport input all
transport output all
escape-character soft 0
escape-character 0
autoselect during-login
autoselect ppp
hold-character 0
no ip tcp input-coalesce-threshold
lat out-group all disabled
line 98
exec-timeout 0 0
no flush-at-activation
modem InOut
modem autoconfigure type mica-K56flex
transport input all
transport output all
autoselect during-login
autoselect ppp
line 99
exec-timeout 0 0
timeout login response 0
no flush-at-activation
modem InOut
modem autoconfigure type mica-K56flex
data-character-bits 8
exec-character-bits 8
special-character-bits 8
length 0
width 0
no history
no editing
transport preferred none
transport input all
transport output all
escape-character soft 0
escape-character 0
autoselect during-login
autoselect ppp
hold-character 0
no ip tcp input-coalesce-threshold
lat out-group all disabled
the router itself breaks lines and save it in STARTUP configuration
This post was also posted to the WAN Routing and Switching forum where it has received a response. I suggest that any further discussion of this be consolidated in the WAN forum.
HTH
Rick
Similar Messages
-
Route schedule not updated in some line item of a sales order
Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
AbhilashWhen you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi -
Until how many lines can we write java file
in java file, how many lines can I write?
Manybe It will depend on file system such as window, unix file system.
but, I don't know the exact size.
please let me know how many lines I can wirte in java file of window and unix file system.
thank you in advance.A class and method implementation in source lines of code (sans comments and white space) should be as large as necessary, but no larger. Good design principals tend to drive towards smaller peices, but there is no one right size size limit.
Personally, I suspect any method that has over 50 lines of code as being too large and probably refactorable. I also suspect any single class (or for that matter .java file) with more than 50 methods or more than 2000 lines of code as being too large and probably refactorable. But sometimes we might really need a 500 line method or an 8000 line, 200 method class. Maybe its a performance thing. Maybe it is just that complicated and too hard to break up. I doubt it occurs frequently, but I won't be shocked when I see it.
Sometimes GUI classes (Swing and AWT) get really huge. Sometimes this is due to code generation, sometimes its just being sloppy. It pays to know the difference.
But the Java langauge sets reasonable (if not overly generous) limits on bytecode and constant pool sizes If the Java compiler begins to complain that something you have built is is too large, face it, it probably is. It's like running into scope nesting or nested name (class in a class in a class...) size limits - usually not a good sign for the structure of your code.
Chuck -
All of a sudden using Ibooks on my Ipad - many lines in list view have this indicator || inside a circle appearing on the far right and the books no longer open. I can find nothing about this in help. What is it and what does it mean
Peter RowanHi John, I'm guessing that icon is created and updated by an extension. I'm not sure which one, though. Maybe something that is tracking the trackers, like Lightbeam? Have you tried hovering your mouse over the icon to see whether a tooltip appears, or clicking it?
-
Unable to find line break between two lines in attachment file.
Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF; -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF; -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file. -
How many lines we can print using Non-alv report list ?
Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnuHi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar -
How many lines can you have on a nation wide talk and text plan?
How many lines can you have on a nation wide talk and text plan?
A max of five lines is allowed on the Nationwide Talk & Text family plan.
-
I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?
I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?
-
MM: Purchase requisition line Items - How many line items can we use
Hi all,
1. Purchase requisition Line items (How many line items can we use?), is there any restrictions.
2. While creating PO with only one tax code for the related PR to input Tax code (without selecting line Items).
Regards,
SudheerHi
There is no limitation for number of items in PR.
Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
Regards
Dev -
Too many lines for CO-PA assessment postings in KSB1
Hi Experts,
I created an assessment cycle in KEU1, with one segment, using an PA transfer structure (several cost elements to several value fields), and I´m using one single secondary cost element (category 42) to credit the cost centers.
When I execute the assessment via KEU5, the credits in the cost centers for the cost element category 42 generates too many lines (for example, I had 3 postings to 3 primary cost elements and in KSB1 I have 9 lines of "credits" - operation KSPA.):
Primary Cost Elements:
4110201004 ==> 3.000,00
4110209009 ==> 2.000,00
4110209013 ==> 1.000,00
Secondary cost element (after settlement through KEU5):
6519999999 ==> 134,36-
198,92-
190,49-
291,54-
548,27-
311,88-
2.659,89-
1.268,02-
396,63-
Do you know how can I summarize this postings to have only 3 (ore one) line for the secondary cost element? I cannot identify what was the criteria used by SAP to generate 9 lines.
Kind Regards
Mayumithe number of line item crediting the cost centre, shall be the same of the line item required in the COPA posting. So the more receiver you have in COPA , the more line item are created.
Paolo -
HOW can i rotate the loop as many lines of multi line container in BPM
Hi All
I have to send an idoc to 2 Receivers by spliting the message.
Based on the occurance of a particular source segments i need to create those many instance of targets.
IDOC ---> Rec1 (More than one message instance)
---> Rec2 (More than one message instance)
I have taken messages of Receiver into a multi line container1
and messages of Receiver 2 into another multi line container2.
HOW can i rotate the loop as many lines of multi line container.
Thans
PrasadHi Raj
There are two webservices are 2 receivers.
In the idoc there is specific segment , which occurs unbounded,Each occurence we Need to check the value of a particual field and send to corresponding Receiver.
For Ex:
ZE1KONH (1..Unbounded)
>MSFGN =004 --> Rec1
>> MSFGN==0009 Rec2
It could be like , 1 or more segm for Rec1 and 1 or more segm for Rec2
all are for Rec1 or All are for Rec2.
so in the tranformation we need to put all message of Rec1 in corresponding multiline container as well for Rec2. Then i need to send to correspongind Receiver.
So here i need to send all splited messages to appropriate receivers -
Need FM/BAPI to get how many line items per given FI document...
Hello Experts,
IS there an available FM or BAPI to get how many line items there is for a given
FI document? We are avoinding BSEG because of the performance.
Hope you can help me guys. Thank you and take care!Hi,
Not sure if there is a specific FMs or BAPIs whose specific purpose is to just count FI document lines. But you can use a number of FMs to read an FI document.
i.e. FI_DOCUMENT_READ - pass the document keys (BUKRS, BELNR, GJAHR) and retrieve the T_BSEG table to get the document lines. Then you can just use DESCRIBE statement to get the number of lines in T_BSEG.
Also, based on experience, I never had any problems with BSEG as long as I am providing the complete keys for an FI document (BUKRS, BELNR, GJAHR). But if you are trying to avoid BSEG, you can use the secondary index tables like BSIS , BSAS, BSAD, BSID, BSIK, BSAK to improve performance.
Regards,
Oscean Tortona -
How to input FI invoice with many line items using FB60
Dear All,
Currently the users are posting document consisting of 500 to 700 line items every period using transaction FB60. The line items that are posted every period are not repetitive in nature. It is consuming lot of time.
Is there any efficient (simpler) way of posting the document with so many line items? could you please share your thoughts in this regard?
Thanks & Regards
VasuHi Vasu,
Try to do a recording for a BDC program with Tcode SHDB.
Then ask your ABAPer to developa program with this BDC recording.
This will fix the purpose.
Thanks,
Srinu. -
Tax break up in line by line for each item in the repetitive area
Dear SAP PLD Experts
I am facing a problem for generating excise invoice in pld with tax break for each line item .
for eg : i have 5 line item in the invoice.
so , i want to show the tax break up for each line item seperately in column wise .
slNo----Item CodeQtyPriceCenvat E.Cess---- H.E.Cess-- Vat--
Total
1-- A 5 -1000 96.401.920.96 40.00--- line total
2
3
4
5
But when i am showing the Tax amount from Sales tax authorities table in repetitive area, its showing 25 line numers instead of 5 line. and tax amounts is showing line by line.
Can any body help me to sort out this issue.
Thanks
RegardsDear,
Add the UDF's on the marketing document you want the tax break up.
Apply FMS using below queries and call these UDF's on your PLD.
FOR BED
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount =$[$38.21.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='9' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For Cess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='8' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For HCess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='10' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
This will help you.
regards,
Neetu -
Huge Conversion File - Too many lines
Hi Experts,
Is there any way to split a Conversion File?
I have a Conversión file with too many lines, so when I save it, it takes a lot of time, (11.000 rows, more than half an hour) and sometimes the Excel hand up (froze).
It is becaming a problem, because everytime I save the Conversion file, I can not use the excel for a while.
Any idea?
Thanks in advance.
IriaIria and Patrick,
I want to give an information about this.
BPC transformation file can be multiple steps in one file.
For example,
*Options
*Transformation
*Conversion
*Options
*Transformation
*Conversion
*Options
*Transformation
*Conversion
Therefore, If you only has a problem with conversion, you can do it as below
*Options
*Transformation
*Conversion
conversion part1
*Options
*Transformation
*Conversion
conversion part2
*Options
*Transformation
*Conversion
conversion part3
Note 1 : If you don't need multiple transformation, you only need to specifiy it in the first transformation.
Note 2 : Conversion file can have multiple Tabs in one conversion excel workbook but I am not sure about the performance
when you do that. So please try two things.
1. Split it into multiple worksheet
2. Split it into multiple workbooks.
Please update your result for others.
Note3 : You don't need multiple Convert task, it will be executed in a convert task.
I hope it will help you
Thank you.
James Lim
Edited by: James Lim on Mar 4, 2010 4:31 PM
Maybe you are looking for
-
How to use a JCO connection pool in an EJB?
Hi *, I want to build a WebService using SAP Web AS (J2EE Engine) that connects to a R/3 ERP (release 4.7). I thought of building a stateless session bean that will be deployed as webservice. The session bean shall connect to the R/3 in order to call
-
Need assitance to obtain permission to download APPS for my iPad through my MacBook Pro that for some reason iTunes is not allowing to do, I get message like "this computer doesn't have authorization to write on ITunes Media. I have had the iTunes ac
-
Equium L300 - Will not install anything other than Microsoft downloads
Equium L300 updated with Windows 7. I am a novice where PCs are concerned so any help welcomed. My notebook will not install "programmes" (eg Java AVG etc etc) It down loads, ask to run then nothing happens. It used to ! . I have tried just about eve
-
When I open the web page for seek.com I am able to read the first page for jobs but when I change to the next page the firefox message pops up and I have close it. I am unable to get past the first page.
-
App_debitcard.2.0.0.tcl - long pound doesnt work properly
Hi friends! I trying long pound in standart application example. My incoming call from pots, then i enter pin code and destination number. I type pound key at ACTIVE status fsm machine and starts disconnecting process. When outgoing leg is disconnect