Router WRV54G Quick vpn client 1.10 ruuing on XP (remotel...

router WRV54G
Quick vpn client 1.10 ruuing on XP (remotely)
well, the client can connect to VPN router and i can verify the status online on tab vpn BUT
after 2-3 min. client receive the error message
"the gateway not responding"
AND
if client tries to ping from command prompt to the local ip addresses he find "negociating IP security"
status of router is :
- all security including firewall is disabled
- i have public IP address on Router having 255.255.255.0 subnet
- my local subnet is 10.10.1.x
please tell me what should be done
Thanks
Message Edited by SHAQ on 12-18-2007 09:26 AM

try upgrading / reflashing the firmware of the wrv54g to the latest available from www.linksys.com/download
try changing the MTU size on the client router to 1452
check whether it makes any difference

Similar Messages

Installing Quick VPN Client on Windows 8.1

Hi Guys
We use Quick VPN Client to connect to our office using the RV016 VPN Router.
The QuickVPN Client works fine on Windows XP, Windows 7. It also worked fine on Windows 8 initially.
Recently we noticed that when we try to use the QuickVPN Client to connect to our office VPN, the client application is just waiting and showing the message connection and not proceeding any further from that screen. Becuase of the we are unable to connect to our office VPN from Windows 8 or 8.1.
Does anyone here has some useful tips to make the QuickVPN Client work again successfully from Windows 8 or Windows 8.1?
Looking forward to hearing from you guys
Regards
Jo

I've been able to use Quick VPN successfully on several Windows 8 and 8.1 machines by doing the following:
Right-click on the Quick VPN desktop shortcut and then click on the compatibility tab. Under "compatibility mode, select, "Windows Vista (Service Pack 2); under "Settings", click, "Run the program as an administrator".
In Windows firewall advanced settings, add inbound and outbound allow rules for port 60443.
In Windows firewall advanced settings, add an outbound allow rule for ICMPv4
If you're using Adobe Creative Cloud, you'll need to quit the Creative Cloud Desktop application in order to use Qucik VPN. CEFHelper.exe (used by the Creative Cloud Desktop application) has a dependency/lock on wget.exe, and will cause Quick VPN to not respond at the certificate recognition phase. Quitting the Creative Cloud Desktop application (and thereby killing CEF Helper) allows Quick VPN access to wget.exe and it will then function normally.
**Edit; addendum** Windows updates as of 2013-04-20 require that rules in Windows firewall advanced settings be established that allow wget.exe both inbound and outbound. Path is %ProgramFiles% (x86)\Cisco Small Business\QuickVPN Client\wget.exe for 64-bit Windows machines.

Where to get the "Linksys Quick VPN client" for my RV082

I tried some links like http://linksys.com/support
but that one is broken.
So where can I get the "Linksys Quick VPN client"
Not for 50 clients only need is for 3 clients, but still need a client to download.

Hi awestin, please be directed to the Cisco Small Business Community as they are now the ones providing support for the RV082.
https://supportforums.cisco.com/community/netpro/small-business
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

RV042 quick VPN client cant ping lan network

Hi guys,
I've just created a client2gateway IPSec tunnel on RV042 and use Quick VPN client on remote PC trying to connect this router.
Quick VPN showed the tunnel was establised. But I couldn't ping the Lan network behind the router RV042.
Can anyone help me ?
Thanks.

Hi,
I modified the client2gateway mode to Client access mode.
Now I can ping (from QuickVPN client) to 172.16.1.0/24 network behind the router RV042.
But if I put another subnet as 10.92.x.0 behind this router, I still can't ping. Since Client access configuration is too simple, I cannot find a way to modify the subnet.
Seems 172.16.1.0 is default. Am I right?

VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client

Hello,
I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP.
VPN is working when I replace ASA5505 with ASA5510 correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
Can you help me, how can I debug or troubleshoot this problem ?
I am unable to update software on ASA5505 side.

Hello,
Hire is what my config look like:
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 120 set pfs
crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 140 set pfs
crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
crypto dynamic-map outside_dyn_map 160 set pfs
crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 180 set pfs
crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 200 set pfs
crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
tunnel-group HW-CLIENT-GROUPR type ipsec-ra
tunnel-group HW-CLIENT-GROUP general-attributes
address-pool HW-CLIENT-GROUP-POOL
default-group-policy HW-CLIENT-GROUP
tunnel-group HW-CLIENT-GROUP ipsec-attributes
pre-shared-key *******
group-policy HW-CLIENT-GROUP internal
group-policy HW-CLIENT-GROUP attributes
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cisco_splitTunnelAcl
nem enable

Unable to access LAN behind RV042 from QUICK VPN Client once it connects

Hi,
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
What's the problem in configuration? What i have to do?
Thanks
VC Gundapaneni

Hi There.
have a look over here.
http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/

I cannot route to remote subnets from cisco vpn client and pptp client

Hi guys,
I've a big problem, I configured a 877 cisco router as a cisco vpn server (the customer use it to connect to his network from pc) and a pptp vpn server (he use it to connet to the network from a smartphone).
In this router I created 2 vlan, one for wired network (192.168.10.0/24) and the second one (10.0.0.0/24) for wireless clients and I use fastethernet 3 port to connect these to the router.
this is the issue, when the customer try to connect to a wireless network from both of vpn clients he cannot do this, but if he try to connect to a wired network client all working fine.
following the addresses taken from the router.
- encrypted vpn client -
ip address. 192.168.10.20
netmask 255.255.255.0
Default Gateway. none (blank)
- pptp vpn client -
ip address. 192.168.10.21
netmask. 255.255.255.255
Default Gateway. 192.168.10.21
Is possible that I cannot reach the remote subnet because the clients doesn't receive a gateway (in the first case) or receive the wrong subnet/gateway (in the second one)..?
There is anyone can help me..?
Thank you very much.
Many Kisses and Kindly Regards..
Ilaria

The default gateway on your PC is not the problem, it will always show as the same IP address (this is no different when you dial up to an ISP, your DG will again be set to your negotiated IP address).
The issue will be routing within the campus network and more importantly on the PIX itself. The campus network needs a route to the VPN pool of addresses that eventually points back to the PIX.
The issue here is that the PIX will have a default gateway pointing back out towards your laptop. When you establish a VPN and try and go to an Internet address, the PIX is going to route this packet according to its routing table and send it back out the interface it came in on. The PIX won't do this, and the packet will be dropped. Unless you can set the PIX's routing table to forward Internet packets to the campus network, there's no way around this. Of course if you do that then you'll break connectivity thru the PIX for all the internal users.
The only way to do this is to configure split tunnelling on the PIX, so that packets destined for the Internet are sent directly from your laptop in the clear just like normal, and any packet destined for the campus network is encrypted and sent over the tunnel.
Here's the format of the command:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#1048524

Assign Route to Windows 2K or XP VPN Client

Is it possible via radius, PIX vpdn, or IOS vpdn configuration to assign a route to a Windows 2K or XP VPN client?

it is possible in VPN concentrator where we can send a default route to the VPN client, not sure if it works in PIX.

Problem connect Quick VPN with RV042

I have trouble connectin with the router RV042 Quick VPN. When you reset then router can initiate communication for a while and then returns to be imposible.

Could you please tell us which is Cisco device are you trying to connect to? In the logs, I see:
2012/05/25 12:40:15 [WARNING]Server's certificate doesn't exist on your local computer.
2012/05/25 12:40:17 [STATUS]Remote gateway was reached by https ...
2012/05/25 12:40:17 [WARNING]Remote gateway wasn't reached...
The highlighted lines says the complete story.
Could you please check if the certificate applied to the outside interface of the cisco device to which you are connecting is also present in the trusted root certificate store of the client machine.
Thanks,
Vishnu Sharma

IOS VPN will not respond to Cisco VPN Client connections.

Hi all,
I am about to set my routers on fire here.
I have two 2921 ISRs both with Security licenses on separate leased lines. I have configured one to accept VPN connections from our Cisco VPN Client remote workers.
I have followed the set up process I used on another site with an 1841/Sec router and the same clients and I have also checked against the config given in the latest IOS15 EasyVPN guide.
With all debugs active, all I see is
038062: Dec 8 14:03:04.519: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (N) NEW SA
038063: Dec 8 14:03:04.519: ISAKMP: Created a peer struct for x.y.z.z, peer port 60225
038064: Dec 8 14:03:04.519: ISAKMP: New peer created peer = 0x3972090C peer_handle = 0x8001D881
038065: Dec 8 14:03:04.523: ISAKMP: Locking peer struct 0x3972090C, refcount 1 for crypto_isakmp_process_block
038066: Dec 8 14:03:04.523: ISAKMP:(0):Setting client config settings 3E156D70
038067: Dec 8 14:03:10.027: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATE
Below is the abridged config.
System image file is "flash0:c2900-universalk9-mz.SPA.154-1.T1.bin"
aaa new-model
aaa authentication login default local
aaa authentication login VPNAUTH local
aaa authorization exec default local
aaa authorization network VPN local
aaa session-id common
crypto isakmp policy 10
encr aes
authentication pre-share
group 14
crypto isakmp client configuration group VPN
key ****-****-****-****
dns 192.168.177.207 192.168.177.3
domain xxx.local
pool VPNADDRESSES
acl REVERSEROUTE
crypto ipsec transform-set HASH esp-aes esp-sha-hmac
mode tunnel
crypto ipsec profile IPSECPROFILE
set transform-set HASH
crypto dynamic-map VPN 1
set transform-set HASH
reverse-route
crypto map VPN client authentication list VPNAUTH
crypto map VPN isakmp authorization list VPN
crypto map VPN client configuration address respond
crypto map VPN 65535 ipsec-isakmp dynamic VPN
ip local pool VPNADDRESSES 172.16.198.16 172.16.198.31
ip access-list extended REVERSEROUTE
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.0.0.255 any
ip access-list extended FIREWALL
2 permit udp any host a.b.c.d eq non500-isakmp
3 permit udp any host a.b.c.d eq isakmp
4 permit ahp any host a.b.c.d
5 permit esp any host a.b.c.d
If anyone can see anything wrong, I would be so pleased and it would save the destruction of an ostensibly innocent router.
Thanks,
Paul

> I actually love you. Thank you so much.
Sorry, I'm married ... ;-)
> Im not using a virtual template. Can I get away without the Crypto Map if I use one...? All my tunnels are VTIs
oh yes, I could have seen that ...
crypto isakmp profile VPN-RA
match identity group VPN
client authentication list VPNAUTH
isakmp authorization list VPN
client configuration address respond
virtual-template 1
interface Virtual-Template1 type tunnel
description Tunnel fuer Cisco VPN-Client
ip unnumbered GigabitEthernet0/0
ip virtual-reassembly in
tunnel mode ipsec ipv4
tunnel protection ipsec profile IPSECPROFILE
Your isakmp-config and ipsec profile stays the same.

VPN client unable to access Internert via split tunneling.

I have split tunneling configured on a PIX 515. The remote VPN client connects to the PIX fine and can ping hosts on the internal LAN, but cannot access the Internet. Am I missing something? My config as per below.
Also, I don't see any secured routes on the VPN client via Statistics (screen shot below)
Any advice is much appreciated.
Rob
PIX Version 8.0(3)
hostname PIX-A-250
enable password xxxxx encrypted
names
interface Ethernet0
nameif outside
security-level 0
ip address x.x.x.250 255.255.255.240
interface Ethernet1
nameif inside
security-level 100
ip address 192.168.9.1 255.255.255.0
passwd xxxxx encrypted
ftp mode passive
dns domain-lookup outside
dns server-group Ext_DNS
name-server 194.72.6.57
name-server 194.73.82.242
object-group network LOCAL_LAN
network-object 192.168.9.0 255.255.255.0
network-object 192.168.88.0 255.255.255.0
object-group service Internet_Services tcp
port-object eq www
port-object eq domain
port-object eq https
port-object eq ftp
port-object eq 8080
port-object eq telnet
object-group network WAN_Network
network-object 192.168.200.0 255.255.255.0
access-list ACLOUT extended permit udp object-group LOCAL_LAN any eq domain log
access-list ACLOUT extended permit icmp object-group LOCAL_LAN any log
access-list ACLOUT extended permit tcp object-group LOCAL_LAN any object-group Internet_Services log
access-list ACLIN extended permit icmp any any echo-reply log
access-list ACLIN extended permit icmp any any unreachable log
access-list ACLIN extended permit icmp any any time-exceeded log
access-list split_tunnel_list remark Local LAN
access-list split_tunnel_list standard permit 192.168.9.0 255.255.255.0
access-list NONAT extended permit ip object-group LOCAL_LAN 192.168.100.0 255.255.255.0
pager lines 24
logging enable
mtu outside 1500
mtu inside 1500
ip local pool testvpn 192.168.100.1-192.168.100.99
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NONAT
nat (inside) 1 0.0.0.0 0.0.0.0
access-group ACLIN in interface outside
access-group ACLOUT in interface inside
route outside 0.0.0.0 0.0.0.0 195.171.252.45 1
route inside 192.168.88.0 255.255.255.0 192.168.88.254 1
route inside 192.168.199.0 255.255.255.0 192.168.199.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set Set_1 esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set Set_1
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 280000
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
group-policy testvpn internal
group-policy testvpn attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
username testuser password xxxxxx encrypted
tunnel-group testvpn type remote-access
tunnel-group testvpn general-attributes
address-pool testvpn
default-group-policy testvpn
tunnel-group testvpn ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
service-policy global_policy global
prompt hostname context
Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e
: end
PIX-A-250#

Hello Jennifer,
I can ping the 192.168.88.0/24 (host 88.3) from my PIX fine. The 88 subnet hangs off a 2950 switch. This is my diagram.
My configs are as follows. Please note I have left out the suggested lines of config from above as they had no effect.
Very much appreciate your time and effort with my issue.
Many thanks,
Rob
PIX A
PIX Version 8.0(3)
hostname PIX-A-250
enable password NBhgOL6eDYkO4RHk encrypted
names
interface Ethernet0
nameif outside
security-level 0
ip address x.x.x.250 255.255.255.240
interface Ethernet1
nameif inside
security-level 100
ip address 192.168.9.1 255.255.255.0
passwd k85be8tPM1XyMs encrypted
ftp mode passive
dns domain-lookup outside
dns server-group Ext_DNS
name-server 194.72.6.57
name-server 194.73.82.242
object-group network LOCAL_LAN
network-object 192.168.9.0 255.255.255.0
network-object 192.168.88.0 255.255.255.0
object-group service Internet_Services tcp
port-object eq www
port-object eq domain
port-object eq https
port-object eq ftp
port-object eq 8080
port-object eq telnet
object-group network WAN_Network
network-object 192.168.200.0 255.255.255.0
access-list ACLOUT extended permit udp object-group LOCAL_LAN any eq domain log
access-list ACLOUT extended permit icmp object-group LOCAL_LAN any log
access-list ACLOUT extended permit tcp object-group LOCAL_LAN any object-group Internet_Services log
access-list ACLIN extended permit icmp any any echo-reply log
access-list ACLIN extended permit icmp any any unreachable log
access-list ACLIN extended permit icmp any any time-exceeded log
access-list split_tunnel_list remark Local LAN
access-list split_tunnel_list standard permit 192.168.9.0 255.255.255.0
access-list split_tunnel_list standard permit 192.168.88.0 255.255.255.0
access-list split_tunnel_list standard permit 192.168.200.0 255.255.255.0
access-list NONAT extended permit ip object-group LOCAL_LAN 192.168.100.0 255.255.255.0
pager lines 24
logging enable
mtu outside 1500
mtu inside 1500
ip local pool testvpn 192.168.100.1-192.168.100.99
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NONAT
nat (inside) 1 0.0.0.0 0.0.0.0
access-group ACLIN in interface outside
access-group ACLOUT in interface inside
route outside 0.0.0.0 0.0.0.0 x.x.252.45 1
route inside 192.168.88.0 255.255.255.0 192.168.88.254 1
route inside 192.168.199.0 255.255.255.0 192.168.199.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set Set_1 esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set Set_1
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 280000
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
group-policy testvpn internal
group-policy testvpn attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tunnel_list
username robbie password mbztSskhuas90P encrypted
tunnel-group testvpn type remote-access
tunnel-group testvpn general-attributes
address-pool testvpn
default-group-policy testvpn
tunnel-group testvpn ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
service-policy global_policy global
prompt hostname context
Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e
: end
3560_GW Gateway
test_gw01#sh run
Building configuration...
Current configuration : 2221 bytes
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname test_gw01
enable secret 5 $1$cOB4$UDjkhs&$FjQBe8/rc30
no aaa new-model
system mtu routing 1500
ip subnet-zero
ip routing
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface GigabitEthernet0/1
interface GigabitEthernet0/2
description uplink to Cisco_PIX
switchport access vlan 9
interface GigabitEthernet0/3
interface GigabitEthernet0/4
interface GigabitEthernet0/5
interface GigabitEthernet0/6
interface GigabitEthernet0/7
interface GigabitEthernet0/8
interface GigabitEthernet0/9
interface GigabitEthernet0/10
interface GigabitEthernet0/11
interface GigabitEthernet0/12
interface GigabitEthernet0/13
interface GigabitEthernet0/14
interface GigabitEthernet0/15
interface GigabitEthernet0/16
interface GigabitEthernet0/17
interface GigabitEthernet0/18
interface GigabitEthernet0/19
interface GigabitEthernet0/20
interface GigabitEthernet0/21
interface GigabitEthernet0/22
interface GigabitEthernet0/23
switchport access vlan 88
switchport mode access
spanning-tree portfast
interface GigabitEthernet0/24
switchport access vlan 9
switchport mode access
spanning-tree portfast
interface GigabitEthernet0/25
description trunk to 2950_SW_A port 1
switchport trunk encapsulation dot1q
interface GigabitEthernet0/26
interface GigabitEthernet0/27
description trunk to A_2950_112 port 1
switchport trunk encapsulation dot1q
shutdown
interface GigabitEthernet0/28
interface Vlan1
no ip address
shutdown
interface Vlan9
ip address 192.168.9.2 255.255.255.0
interface Vlan88
ip address 192.168.88.254 255.255.255.0
interface Vlan199
ip address 192.168.199.254 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.9.1
ip route 192.168.88.0 255.255.255.0 192.168.9.1
ip route 192.168.100.0 255.255.255.0 192.168.9.1
ip route 192.168.200.0 255.255.255.0 192.168.9.1
ip http server
control-plane
banner motd ^C This is a private network.^C
line con 0
line vty 0 4
login
line vty 5 15
login
end

Can't get Quick VPN to connect to my Cisco 120w

For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble. Can anyone help me with this?
Thank you for your time
Gary V.

first place to look is the logfile,
C:\Program Files\Cisco Small Business\QuickVPN Client\Log.txt
what does it say?

Quick VPN step-by-step guide!

Hello.
Can someone please provide a step-by-step guide on how to configure the SA-520 for Quick VPN Access? The manual doesn't describe this scenario at all, so please someone give me instructions how to set the IKE and VPN policy so that Quick VPN can connect. I don't need any IP validation or anything, I just need it to work and take it from there...
Thanks! Artur

Like Mr Roe explained you may need to call into the office and let an agent test the connection for you. However here are some quick steps that you need to take to get the quick vpn configured.
1. You will need to access the set up screen for your SA520- You then need to click on the VPN tab.
2. Select IPSEC Users. There you will find a drop down arrow box select CISCO QUICK VPN.
3.The Menu option may change slightly. A warning message will appear that you will need to make sure that the LAN subnets are different from your local and remote side.
4. There will be another warning message advising you to enable remote management. You can find this area under the NETWORK MANAGEMENT TAB.
You will enable remote management from this page, by simply checking the box. you will need to grant access type by allowing all ip addresses or by range of addresses or for a particular PC which ever fits your need. All IP addresses is what I tested my VPN connection with and it was successful. The port you will use will be port 443. After you have configured this page save your settings.
5. Now that you have verified that all of your basic setting needs are taken care of now you can return to the VPN tab and create your user's and assign passwords for there connection.
6. Again you will choose the CISCO QUICK VPN from the drop down box and then assign your users.
7. For the users who will be accessing this connection they will need to have downloaded the cisco quick vpn client from our websight to utilize this type of connection. The version number for this QUICK VPN CLIENT is 1.4.1.2.
8. All users who try and access this quick VPN connection will need to have the QVPN client Utility saved on there desktop for access.
hope this was helpful.

Cisco VPN Client connects, but doesn't....

Have an issue where the workstation connects to the remote router using Cisco VPN Client successfully, but cannot receive traffic, but can...... I can see the connection with sh cry isa sa, and can see the packets encrypt/decrypt via sh cry ipse sa, as well as see the encrypt/decrypt in the VPN Client status, these numbers match up with the number of pings that are sent across the tunne. I can also see the ougoing and incoming packets with wireshark on the Cisco adapter on the workstation that is connected over the tunnel, icmp to:x.x.x.37 from:x.x.x.100, icmp from:x.x.x.100 to:x.x.x.37. Even with wireshark seeing the traffic, the requests time out. Any ideas?

Matthew,
If you are seeing packets encrypted/decrypted on both sites, but not getting an actual response, it sounds like tough one.
Have you tried disabling the client's firewall?
Also, you to discard a possible problem with the VPN virtual adapter have you tried to uninstall/reinstall the VPN Client?
Sorry, the suggetions I'm giving you are very basic but it definetely sounds kind of a weird problem...
Let me know how it goes.
Raga

WRVS4400N as VPN Client?

Hello Cisco Support.
I have a Cisco WRVS4400N Small Busniess router standing - I rent a VPN connection with BeeVPN where I am taking advantage of the Cisco AnyConnect to connect to my VPN at BeeVPN. But instead of using AnyConnect, will I hear if it is possible to setup my router as a VPN client? So i don't need to run AnyConnect on my computer every time i start it up.
Thanks in advance for your help -
Best regards Nikolaj

No one there can help me?

Router WRV54G Quick vpn client 1.10 ruuing on XP (remotel...

Similar Messages

Maybe you are looking for