Routing data from web ovi map TO my mobile device

How can I transfer the route data from web ovi map to my cell phone (E66) an using it for navigation?

within your phone application you can synch.
Depends on your phone's map-version, where that is... check the menu-area "favourites"...

Similar Messages

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

How to extract data from web URL

I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

I was doing one project which need to extract data
from web pages and then analyze these data. the
question is how to extract data from there, using
html parser? need help, thanks a lotTry this:
http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
Or, like you said yourself, use an HTML parser:
http://java-source.net/open-source/html-parsers

Reading the data from web

Hi guys ,
I am new to j2me ,i am going to start a project named onlineNews
for this project i need to read the data from web.can anyone help me with a sample code for reading a data from web
thank u for spending your precious time

that depends on the used technology on top of the web. I believe with J2ME you have access to the URLConnection class, so you can send HTTP requests manually. Otherwise you will need to use low level sockets, or use webservices such as SOAP or XML-RPC.
There is a lightweight XML-RPC client available for J2ME. It is no longer in development, but that doesn't mean that it doesn't work.
http://kxmlrpc.objectweb.org/

Regarding how to pass the data from web dynpro to workflow

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Check this [thread|SAP_WAPI_START_WORKFLOW;

How to pass the data from web dynpro to workflow.

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Hi
you can use function module
data   ls_input_container TYPE swr_cont.
data   lt_input_container TYPE TABLE OF swr_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
    EXPORTING
      task            = ptask
    IMPORTING
      return_code     = lv_return_code
      new_status      = lv_new_status
    TABLES
      input_container = pinput_container
      message_lines   = lt_message_lines
      message_struct = lt_message_struct.
where you pass the data in imnternal table "pinput_container" as
ls_input_container-element = 'KUNNR'.
ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'CLUSER'.
ls_input_container-value = lv_cluser.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'BUKRS'.
ls_input_container-value = lv_bukrs. " youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VKORG'.
ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VTWEG'.
ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'SPART'.
ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
*Also Forgot to mention where ptask is your workflow ID *
Regards,
Arvind
Edited by: Arvind Patel on May 14, 2010 7:38 AM

How to send data from WEBI HYPERLINK to SAP R/3

Can someone please help in sending the data from WEBI to R/3 system.
We created a universe on top of a BEX Query and on Top of that we created a web intelligence report.
Now our requirement is when we click on any record in BO web ntelligence report that data should get populated in SAP R/3 system FAGLL03 screen . How to send the data from WEBI to R/3 system.
Edited by: SAP BPS on Feb 5, 2010 6:23 AM

Herry,
You can refer the below docs for reference. Instead of receiver JDBC , you have to use Receiver as R/3.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
I hope it helps.
Best regards,
raj.

BI 4.0 sp 6 service name to export data from webi to excel

Hi there,
I'm using BI 4.0 SP6 and I was just curious to find out which servers/services are invoked while exporting data from WebI report to Excel?
Thanks in advance.
Regards,
samique

Check below section in the Admin guide for this information.
Architecture\Process Workflows

How get data from Web Service with token?

Can I get data from Web Service made with Java?
This WS has a Token.
Any ideas o reference?
Regards!
Fran Díaz | twitter: @frandiaz_ | Blog: {geeks.ms/blogs/fdiaz/} | Communities: {onobanet.es} & {secondnug.com}

We've now added this ability to Web.Contents. You can say something like
Web.Contents("http://my.web.service/1", [Headers=[#"The-Token"="0a0138ef2d"]])
and it will pass a header with the key "The-Token" and the value "0a0138ef2d" as part of the HTTP request. For security reasons, this will only work for anonymous web requests.
The December preview can be downloaded from
http://www.microsoft.com/en-us/download/details.aspx?id=39933&WT.mc_id=blog_PBI_Update_PowerQuery

EVDRE encountered error retrieving the data from web Server

Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thanks

hi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks

Don't show data from web service to Cross-Tab in xcelsius

Hi all visitors
I have created one web service and my web service will show data like this.
Group ___Floor ____Amount
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 2__2200000
Member__Floor 1__     1000000
Member__Floor 1__     1000000
In my xcelsius, i have option to make it to cross-tab.
when i use that data( data above by manual) to excel spreadsheet. The data will change to
Group______________Floor1________________Floor2______________GrandTotal
Member____________5000000_____________ 3200000_____________8200000
GrandTotal__________5000000_____________ 3200000_____________8200000
But when i load the data from web service,It doesn't show anything.
(when i use list view to show data from web server, i see all data)
How can i load data from web service and show the data like manually?
Best Regards,

Hi Tony,
As per your example i have used the SUMIF fucntion
have a glance at that and let me know if you need help
Data coming from webservice >>     Concat     Group     Floor     Amount
                                          =C7&D7     Member     Floor1     1000000
                                          =C8&D8     Member     Floor2     1000000
                                          =C9&D9     Member     Floor1     1000000
                                          =C10&D10     Member     Floor2     1000000
                                           =C11&D11     Member     Floor2     2200000
                                           =C12&D12     Member     Floor1     1000000
                                          =C13&D13     Member     Floor1     1000000
Cross Tab >>Group     Floor1                                                                    Floor2
      Member     =SUMIF($B$7:$B$13,$H$7&I6,$E$7:$E$13)     =SUMIF($B$7:$B$13,$H$7&J6,$E$7:$E$13)
     Grand Total     =SUM(I7)                                                                     =SUM(J7)
Original data after
Group     Floor1     Floor2
Member     4,000,000     4,200,000
Grand Total     4,000,000     4,200,000
Hope this may solve your issue.
Ley me know if you have any other issues.
Regards,
AnjaniKumar C.A.

EVDRE encountered an error retriving data from web server in PROD

Hi friends,
We are checking Evdre reports in BPC production system. We checked few application' EVdre input templates & reports and are fine.
But yesterday evening onwards we are facing below error message.
EVDRE encountered an error retriving data from web server. This message we are getting for all BPC applications in BPC production. There is no short dump in backend.
But when i checked in BPC developement there is no probelm.
We are on BPC7.5 NWsp04 and BI7.01.
In BPC, production,when i try to create evdre template(just after filling
information in evdre builder), immediately getting same error information.
I read few notes, did as per that but sill problem exists. In note, mentioned process dim of particular application and process application. Logout from bpc admin & excel. I did this and, that error message not received for upto 20min. After that i'm getting error. We checked communciation between ABAP layer and bpc, reset IIS also. Still same probelm exists.
Any suggestions pls.
thanks,
naresh

Hi frineds,
SAP OSS team resolved along with our basis guy.
Initially SAP supported notes:
1.1475233 and 1378705 Process all dimensions and applications.
2.1355954 Drop SAP temp tables.
3.1428764 confilict only if you use Oracle 10 g, if you don't, then forget it.
I used 1378705 and problem resolved temporarly, but still exists after 1 day.
There are different reasons for getting the error message. In our case, problem is at backend BW and, BW system running on HP unix OS.
Checked librfc32.dll in the
directory /usr/sap/BP1/DVEBMGS00/exe.
Executed the following MDX statment in MDXTEST transcaction, and it
executed in both the available instances.
SELECT
{[Measures].MEMBERS} ON COLUMNS,
[0MATERIAL].[LEVEL00].MEMBERS ON ROWS
FROM [$ZCO_CDPC].
Even i also don't have clue how SAP resolved this issue.
Regards,
Naresh

Web Pages not loading on Mobile Devices

Browsing web pages not working on mobile devices
I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
previously i had adsl from bt and didnt have these issues.
Solved!
Go to Solution.

Try turning Smart Setup off.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Devices where there are known to be problems include:
Some Apple devices including iPhone 5 and Apple TV
some Android smartphones
Xbox<
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help?

when i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help????

For Windows: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Need to grab the data from Web Page and send it to SAP using PI

Hello Experts,
I need to grab the exchanges rates from the below link.
http://www.cbr.ru/scripts/XML_daily.asp?date_req=09-06-2011.
This link returns an XML . I need to get the data from this XML page and post it to SAP ECC using PI.
My requirement is that, process should start from the ECC and grabs the data from the web page which gives you the XML and post this data into ECC using PI. We have a RFC written in ECC side to post the data in ECC.
Please help me to identify the adaptor's needed and what should I need to do to initiate the process from ECC.
Would it be a Async or Sync process ?
I would really appreciate the inputs.
Thanks.
Gaurav.

Hi,
Any particular reason that you want to go for a sync process as then you would need to either use a BPM (RFC to BPM where you use sync/async bridge to get the xml file from the specified link and then send the response back to ECC) or go for a synchronous Java proxy on the receiver side which will grab the exchange rates and then map back to the RFC response structure. In this case, you can avoid the BPM.
Else, as mentioned in Michal's blog, you can break it up into 2 seperate scenarios. RFC/Proxy to File and then File to IDoc/RFC/Proxy which will get the exchange rates into ECC.
Another option can be Proxy --> PI --> ECC(IDoc/Proxy/RFC). Here you can grab the exchange rates from the link in your message mapping through a UDF.
Regards

Routing data from web ovi map TO my mobile device

Similar Messages

Maybe you are looking for