Routing of Non-Answered calls

Greetings,
I have two campuses, one with extension 86XX and the other with 85XX. At this time, when a call is made to any extension with no voice mailbox assigned to it, the call is forwarded and answered by the Cisco Unity default greeting. Then the call is forwarded to the main line extension of 8500. I want to change this so that calls made to an 86XX extension with no mailbox get forwarded to the main line at 8600. Calls made to an 85XX extension get forwarded to 8500 main line.
I browsed the Direct and Forwarded Calls Rules within the Unity Administration, but could not determine that any of that was the correct location to make that change. I could be wrong.
Could I get some advise.
Unity 4.0(3), CCM 4.1(3)sr3c
Thanks in advance

Thanks for your response. I added two rules that transfer to 8500 and another to 8600 based on the dialed number. Both tranfered to the defined "transfer to" extension, but it transfers all unanswered calls immediately without first going to the extension's voicemail, if exist. I have attempted several entries in the "Transfered from" field, but nothing matches.
I found that the Operator Call Handler was configured to forward all Unaddressed Messages to 8500.
The Operator Call Handler has an extension of 0 assigned to it, but not sure if it's a valid extension. Is there typically an extension assigned to the Operator?
How can I confiure the Operator to transfer calls to certain extensions based on the dialed number? Is there a way to tell how the calls are getting to the Operator.
Thanks in advance.

Similar Messages

SKYPE ABUSIVE CHARGES OF NON COMPLETED CALLS!

I like the idea of a class action against Skype for abusive charging of non completed calls.
I sometimes call the same number and it drops 2-3-4 times before it can connect and Sleaze Skype charges me CAD 0.096 for EVERY ONE of those dropped calls.
Can you imagine, if Skype has, as they claim millions of customers how many millions they collect on our back because their lousy system dropped the calls ??? Just think about it !!
Download and check your call summary and you wil be amazed to see how many "fixed charges" you paid while not connecting.
E-mail me if this has happened to you so we can build up a case.

I am glad to hear that U R an employee and not just "any moderator" but I still find it kind of invasive that "any skype employee" can look into my call log w/o my express request / permission...
As far as contacting CS, I did it once and all I got was a "canned answer" asking me do pretty much anything short of reformating my hard drive ... see below
QUOTE:
We have refunded the calls to your balance and apologize for the inconvenience.
The call history list in the My Account section does not currently reflect refunded calls but it will be reflected in your account balance.
Here are a number of suggestions which you should try to help resolve this issue. Please test after each step to see if the action has resolved the problem:
1) Ensure that you are using the latest version of Skype, available for free from: http://skype.com/download/
This solves the issue for most Skype users as we are constantly improving our product
2) Use our Sound Setup Guide to make sure your audio settings are correct:
http://www.skype.com/help/guides/soundsetup.html.
If you have more than one audio device to choose from in Skype -> Tools -> Options -> Sound devices, then please try with different selections.
3) In the Skype top menu: Tools -> Options -> "Connection" window; please tick the option to use the ports 80 & 443.
4) Check that your firewall is not interfering with Skype. You can find our firewall guides at http://www.skype.com/help/guides/firewalls/. Even if it can connect and you are able to use chat it is possible that your firewall is still blocking some connections that Skype needs for a reliable voice call.
5) For this step showing hidden folders and files has to be turned on. Please navigate to My Computer -> Tools -> Folder Options -> View. Once there, please make sure that the option "Show Hidden Files and Folders" is enabled.
* Close Skype with a right click on the systray icon (next to the Windows clock) and selecting "Quit"
* Locate the shared.xml file found in
C:\Documents and settings\Your Windows Username\Application data\Skype\shared.xml
* Delete shared.xml
* Start Skype (shared.xml will be recreated)
6) Make sure all your PC's drivers are up-to-date (especially sound, video, motherboard controllers and network card - you can usually find the latest drivers on the manufacturer's website).
7) If you are using a router, please configure a port forwarding for Skype. You can find guides for an extensive list of routers on http://www.portforward.com/english/applications/port_forwarding/Skype/Skypeindex.htm. Please note that we are not responsible for this page and contents might change unexpectedly.
UNQUOTE
I will try again .....?

Non-Blocking call to read the Keyboard

does anyone know how to make a JAVA program make a non-blocking call to read the keyboard? eg. write a program which generates prime number until a keyboard key is pressed.

if you use a gui you can use keyListener
Would work only if your gui elements have focus right now.

N80 crashes when answering calls using slider.

Have spoken to Orange about this and they are saying (as if they'd say otherwise) that this is a 'new' issue for them. Has anyone else experienced this?
Phone call comes in - open the slider to answer call only to have the phone lock-up. None of the menu buttons or keypad work. The phone keeps ringing with an active display but the only button that works is the power!
Orange have referred this to technical support.
V 3.0614.0.3
11-04-2006
RM-92
Nokia N80 (31.02)
Thanks,
Matt

Well, after another referral to Orange Tech Support, I finally have a new handset.
I started having more 'crashing' events on my phone when using sms, gallery, camera.
Called Cust Service who wanted to do the same stuff all over again...i.e. reset phone but I insisted that they escalate it.
They got back to me within 72 hours and I had a new handset the following week. Upon checking I now have an up-to-date firmware.
As an aside, the new phone actually feels a lot different. The slide is firmer and more stable and the keypad also feels of a better quality. Anyone had similar experiences?
Cheers,
Matt

Using unlocked Iphone 2G phone with t-mobile - non emergency calls

Hello - I have gotten a used Iphone 2G phone. There is firmware installed into it and I am currently on t-mobile. The phone is unlocked. I have my t-mobile sim card in the phone....and I can dial out, and receive calls and (text messages) and that is about it. When I make a call it says 'non emergency calls only" but I can still dial out. from what I was told (from a local wireless company) the phone just can't get past the activation so if I can get past that it will work...please help me if at all possible. and will be more then happy to provide additional details with the issue....thank you in advance!

The phone was purchased unlocked (paid high price). But I guess there is a chance I got ripped off... If so, why does it work with different carriers in Sweden with different SIM cards?

Non-varargs call of varargs method with inexact argument type for last para

i have no idea what the error:
non-varargs call of varargs method with inexact argument type for last parameter
means.
return (Component)sceneClass.getConstructor(
new Class[]{int.class, int.class}).newInstance(
     new Integer[]{new Integer((int)sceneDimension.getWidth()),
            new Integer((int)sceneDimension.getHeight())});
this is the problem area but i'm not sure how to get around it..
any help would be appreciated

I am a Java learner and I got the same warning. My code runs like this:
import java.lang.reflect.*;
class Reflec
     public static void main(String[] args)
          if(args.length!=1)
               return;
          try
               Class c=Class.forName(args[0]);
               Constructor[] cons=c.getDeclaredConstructors();
               Class[] params=cons[0].getParameterTypes();
               Object[] paramValues=new Object[params.length];
               for(int i=0; i<params.length; i++)
                    if(params.isPrimitive())
                         paramValues[i]=new Integer(i+3);
               Object o=cons[0].newInstance(paramValues);
               Method[] ms=c.getDeclaredMethods();
               ms[0].invoke(o, null);
          catch(Exception e)
               e.printStackTrace();
class Point
     static
          System.out.println("Point class file loaded and an object Point generated£¡");
     int x, y;
     void output()
          System.out.println("x="+x+"\ny="+y);
     Point(int x, int y)
          this.x=x;
          this.y=y;
When I compiled the file I got the following:
Reflec.java:26: warning: non-varargs call of varargs method with inexact argument type for last parameter;
cast to java.lang.Object for a varargs call
cast to java.lang.Object[] for a non-varargs call and to suppress this warning
ms[0].invoke(o, null);
^
1 warning
Since the problem was with this line "ms[0].invoke(o, null);" and the specific point falls on the last argument as the warning mentioned that " ... method with inexact argument type for last parameter", I simply deleted the argument "null" and the line becomes "ms[0].invoke(o);" and it works, no warning anymore!
DJ Guo from Xanadu
Edited by: Forget_Me_Not on Jan 8, 2009 10:39 AM

CUIC reporting: handled calls greater than answered calls

Hello,
We met the following problem in Cisco Cuic reporting 8.5.4 for cisco UCCE 8.5.3.
We use only the stock reports. In call type historical all fields we met a strange situation for a simple inbound script:
- the numbers of handled calls is greater than the number of answered calls. This is vey unusual because any call
is first answered and only after that is handled or not by the agent. So the handled condition supose to be first answered.
Any ideas? What could be the cause for additional handled calls?
Also we have problems between the number of handled calls in Agent Team historical all fields and the number of handled calls
in Call type historical all fields. Should not be the same number in both reports ?
The definitions for answered, handled, offered are very simple and they lack essential info in describing the situations
they treat. The whole documentation for enterprise misses many times essential info and the only source of real
info is others knowledge and experience.
Any help is wellcome.
Best regards,
Marius

Answered is incremented when the Agent picks up the call (or received the activity, in the case of EIM).
Handled is incremented when the call (or EIM activity) completes.
Handled will be incremented regardless of whether the call is transferred/conferenced/consulted or not.
As others have mentioned, Answered and Handled counts can be incremented during different intervals depending on the length of the call. The only way I can think of where that would be the case here would be if your agents are handling EIM activities... They could have 5 open emails in their inbox at the end of the day - these 5 open emails would be considered Answered, but not Handled.
If this isn't from non-voice activities, then perhaps you have some system issue causing the problem.
-Jameson

VCSE with dual NIC / SIP H323 encrypted call / traversal and non-traversal call license questions

Dear All,
I have a few questions and I would appereciate if someone will answer my questions?
1) May I know pros and cons of using Dual NIC and single NIC with VCSE in DMZ?
2) In order to make H323 and SIP encrypted call, what configuration need to be done on Cisco endpoint, non-cisco endpoint, VCSC and VCSE (both signalling and Media need to be encrypted).
3)let say my VCSE is in DMZ- endpoint A (cisco) and endpoint B (non-cisco) are registered on VCSE. I would like VCSE to use non-traversal call license when A call to B or B call to A regardless of whether H323 or SIP call.How can I force VCSE and endpoints to use non-traversal call. I only want VCSE to handle signalling and media is EP to EP direct. As traversal license is quite expensive.
I found following information from Cisco document.
all Cisco TelePresence endpoints are traversal enabled and so a traversal license will always be needed when at least one of the endpoints involved in the call is a Cisco TelePresence endpoint.
Is it possible to disable traversal client feature of Cisco endpoint?
Thanks and Best Regards,

voice register pool 4
add-->codec g711ulaw
voice register global
no create pro
create prof
and enable below debugs and send the logs
deb ccsip mess
deb voip ccapi inou
deb h225 asn1
deb h245 asn1

Why my iphone 5s voice mail answer call first and my iphone second.

why my iphone 5s voice mail answer call first and my iphone second.

Hello celazopdef,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning cellular issues:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

Answering calls from car no longer works with iOS 8 update

After updating the firmware to iOS8 my iPhone no longer answers calls from my car bluetooth audio. I get the call alert but the car answer button is disabled.. I am using standard bluetooth communication and not the A2DP technology.
Is anyone facing a similar issue?
I am using iPhone 5s

I know that I had to delete the entry in the car's Bluetooth setup (for Steve's iPhone - replaced and iPhone 5 with 6) and then go through the setup again to get it to work. Perhaps that would solve your issue?

Ready to throw my iPhone in the bin - answering calls

Hi guys, can anybody help me with how to fix my problem? Basically, I cannot answer my phone properly half the time, because of the "Remind me" and "Respond with message" buttons.
When I take it out of my pocket, these buttons are accidentally activated because the screen rubs against my pocket. It's not rare - it's about half the time. The phone stops ringing and I have to dismiss the screen, its a nightmare. Worse, I have even on several occasions accidentally declined calls with a response, it is so embarrassing to call back and explain the reason is my iPhone. When the other caller uses Android, the laughter back is painful.
I thought that it's common sense and basic design, that when a touch-screen phone is locked, no simple buttons should become active in case they are accidentally pressed in pockets. Isn't this why you have slide to open/answer call/open camera etc?
After so many feedbacks, and so many updates to iOS, I am really annoyed this problem is not addressed.
Perhaps there is some setting or feature I am missing? I just want to remove these buttons or make them sliders. The best I have found at the moment is activate Touch ID or passcode and disable the "respond with message" button, but the problem remains with the "remind me" button??
I have submitted feedback to Apple so many times, to please add a setting to disable BOTH these buttons AND to make sure it works with people who don't want to use Touch ID or passcode. After so many feedbacks and so many iOS updates, I think maybe I am missing something and I am not using my iPhone properly as surely such an essential feature can't be this badly designed. Can anyone help me please?

flim_flam81 wrote:
It's not odd at all. It's called the 'tip of the iceberg' effect.
No-one at the dinner table had reported it on Apple Support Communities either - not even myself ! This does not mean we have not met with this problem, or are liars or fantasists.
There are all kinds of bugs or issues or problems which so few people report. It does not make the problem any less real or popularly encountered or troublesome.
When there are problems that affect a large number of people it is reflected in the forums very quickly. For example:
You will note that it is 2 1/2 MILLION views and almost 13,000 posts. Before the thread was locked 3 years ago. This was an actual bug, and it affected less than 1% of iPhone users, but still got the response you see. And this was a time when there were less than 100 million iPhones in use. Now there are almost 600 million. So if yours was a problem for even a tiny minority you would see lots of posts about it.
You need to change the way you use the phone to avoid the problem. No point in getting a different phone, either, because all smartphones handle this the same way.

Does Apple iPhone 4 Dock support answering calls through apple headphone

Does Apple iPhone 4 Dock support answering calls through apple headphone? or is the audio out just a simple audio out that cannot interact with the headphone cable remote control, e.g. answering calls , skipping to next song as we used to as normal?

From my experience, whichever one is connected last reigns supreme and takes over.
When I walk to my car, I have my headphones in, and when I plug it into my car dock (with the headphones still plugged in and music still playing), the music switches from the headphones and pumps through my car stereo.
Then when I get out of the car and plug my headphones in (with the car dock still attached and playing music), the headphones take over.

UCCX Agent Desktop Auto Answering Calls

Has anyone heard of a situation where CAD is auto answering calls? The users are reporting it sporadically only when they get a off a call and a call is waiting in queue, the call will automatically connect right after they hang up the first call.
Sounds bizarre, I know.
Short of restarting services, i'm not sure where to go with this one. I've had a couple clients report this issue to me. They are running UCCX 9.0 (2) SU1
Thanks.

We've had a similar issue. While the agent is talking, the CAD changes state to "work" i.e. it thinks that the call has been hung up. It then goes to "ready" while the agent is still talking. As a result, when the agent hangs up their call, they are in "ready" state and are given the next call immediately.
You may want to check if this is the case with the agent state.
If the state changes are happening like this, check that the handset is snugly sitting on the cradle, reboot the client PC and have them log off/on the phone.
Be sure also to check the CAD agent logs. I'm about to check ours now to see if they show anything up.

Can't make and answer calls using handset. But just works fine with speaker

I have a Blackberry Curve 9630 ,
I can't make or answer calls from the handset. Caller is able to hear
me when call is picked up but I can't hear them. I can only make or answer
the call using speaker option. And works fine this way. Have tried re-booting
but doesn't work. Never experience this before and phone was working
perfectly right up to this morning. All otheres like BBM, Email, SMS, apps,
are working fine.
Appreciate a quick reply on the same. Thank you.

Can you test playing music through the BlackBerry and see if it is audible through both the speaker and the earpiece?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Routing of Non-Answered calls

Similar Messages

Maybe you are looking for