Routing scenario.
We have configured EIGRP on Location C and redistributing into BGP in Location C peer routers. Also, we are running IBGP between R1 & R2.
Running EBGP between R1 (Location C) and R3 (Location A) & R4 (Location C) and R2 (Location B).
Between Location A, Location D and Location B we have MPLS cloud, where we are running BGP.
Now, we are facing problem that users in Location C needs to access server farm located in Location A & Location D, where primary path should be
Between Location C- Location A (R1 - R 3) and secondary path is Location C - Location B (R2 - R4).
But while doing the configuration, we are facing issue while advertising the routes in MPLS cloud, as we running BGP and redistributing the static routes.
Now, question is on which MPLS router we shall add the static route pointing to L3 switch for Location C subnet.
Or if there is any other solution we can apply for this scenario to work.
Thanks in Advance to all people for advising.
In your scenario, I would install a 4-port HWIC Ethernet card into both WAN routers then have your WAAS box plugged into them. One interface configured as the primary and the second one configured for standby. You would need to have an Ethernet cable plugged between the 2 WAN routers for transit traffic. Configure L2/forward and GRE for the return traffic and use WCCP negotiate return for the egress method. This is how all of our remote sites are setup. A second method is if you don't want to plug directly into the WAN routers, you can replace your l3 (model ?) switches with a stack of 3750Es and make them look like one logical switch.
Similar Messages
-
Waas in assymetric routing scenario
I have a waas appliance connected to the L3 switch. there is hsrp running between the wan switches where one of the L3 switch is active and the other is passive. so the waas is in active stanby interface level failover. the cross connection between the wan routers and switches are all l3 and are running ospf routing protocol. I have 2 wan connection on the site. The traffic might leave the network from one end and come through the other end and vice versa. WCCP will be configured on both the switches. Now how is wae going to respond with assymetric routing in this situation that the outgoing traffic that come through L3 switch 1 and is going out through wan router 1 , it might come back through wan router 2 and again redirected to wae through the L3 switch 2. Is it going to work. Well the redirection is Ip wccp ip forwarding and so is the egress method of ip forwarding.
In your scenario, I would install a 4-port HWIC Ethernet card into both WAN routers then have your WAAS box plugged into them. One interface configured as the primary and the second one configured for standby. You would need to have an Ethernet cable plugged between the 2 WAN routers for transit traffic. Configure L2/forward and GRE for the return traffic and use WCCP negotiate return for the egress method. This is how all of our remote sites are setup. A second method is if you don't want to plug directly into the WAN routers, you can replace your l3 (model ?) switches with a stack of 3750Es and make them look like one logical switch.
-
Parallel operations in Routing
Dear All,
is it possible that we can have two parallel operations in the routing.
scenario is: ona production line every thing is same except one operation i.e, melting where there are two furnaces 1 and 2. 50 % of the material melts through furnace 1 and remaining 50 % through furnace 2. so how can we cater this in routing.Waiting
-
WAAS via asymetric routing in a triangle mash
Hi all,
due a misconfiguration i had an asymetric routing scenario in my network environment between three different locations.
The effect was:
traffic from A to C ran directly.
traffic from C to A ran via B.
So far so good.
for sure i know that this scenario is not recommended. However from my experiences i would expect that everything runs cause
WAE in Lokation B would not touch anything as long as WAE in A and WAE in C are closet to client and Server.
Now to my question:
Would WAAS work in an asymetric scenario like this?
In each of these locations i have a WAE connected implemented via WCCP redirection on my outgoing interfaces.Hi Dieter,
The basic condition for WAAS to optimize the traffic is that the WAAS appliance needs to see SYN, SYN-ACK thru the same WAE unit for any TCP session. If it does not, WAAS will not optimize the traffic.
Now looking at your case scenario,
Traffic from A to C runs directly but C to A runs via B.
If you have WAAS at all three sites, it will optimize traffic between A to C, B to A and C to B and vice versa.
Now, for the traffic between A and C, when the traffic passes thru B while returning from C, (second scenario), it will automatically find out that server or client A is not in its local side so it will let it put in pass thru as Pass-through intermidiate (On WAAS B) and sent it to other site (A/C).
But if A or C WAAS does not recieve Syn,SYN/ACK for the tcp session, it will be asymmetric and will not be optimized. Further, it might adversely affect the performance.
On the other side, if you have WAAS at all three sites, Asymmetry exists only for site B and not for A or C. This is not a "TRUE" network asymmetry. Network Asymmetry happens when the device misses any of the initial tcp handshake packets.
Hope this helps.
Regards.
PS: Please mark this as Answered, if it answers your question. -
Open letter to Cisco regarding the UC320 platform
Cisco,
I have never in my life been exposed to a "production" piece of equipment with so many bugs, missing features and oddities as the UC320. While I am sure many of you are working hard to reign in the problems, this platform is an utter embarrassment that should be in the preliminary alpha stages, not a channel product being sold to end users.
It is clear that Cisco has little understanding of how SMALL business works and how SMALL partners work with small business customers. A larger partner may be able to string a larger business along with promises of bug fixes and feature additions while charging them to make things right and.or padding the overall cost to account for the callbacks. True small businesses don't have the time, patience or money to deal with problematic hardware. When a partner sells a small business a piece of technology, it better work (at a reasonable cost) or the technology and the partner are out the door.
I was extremely excited when this system was announced and saw great potential for small business customers and an alternative to the Avaya Partner IP and other platforms targeted at the same demographic. I jumped in and put a UC320 in the office of one of my small customers. This whole experience has cost me the trust of a client and is going to end up costing me $3000-$4000 out of pocket (hardware, labor, travel) to make things right with the customer.
As it stands, countless hours have been spent trying to get this system to operate in a reasonably stable and productive manner. At this time the UC320 system has been reset and reconfigured in KEY mode (this time using 2.1.3(0), as the problems with steering digits, call routing and redial in "hybrid mode" made the system more than a little cumbersome to use. Now in KEY mode, caller ID only works on some stations AFTER a call is picked up. On one station, incoming calls are somehow routed to the "Phone Monitor" buttons instead of the "Shared FXO Line" buttons. The user has to press the monitor button to pick up a call, but the call does not always ring at the station so she has to watch for the lights. While the caller ID functionality is a bit better after the latest firmware update, it is still far from working properly. These basic call routing problems are not reasonable and not acceptable, period. The customer is tired of "we are working on it" and so am I.
Other problems (to mention a few):
The GUI is full of buggy behavior. One example if many: The impendence matching dialog only works the first time around and then the GUI loses track of what it is doing and must be reset.
It takes 7-10 minutes for the GUI to load to the login screen over a remote connection. The UC320 is connected to a Verizon DSL, while not blazing fast it is a decent connection. Initial GUI loading on the LAN is almost as bad.
The IE9 product that ships with every new Windows computer is not compatible with the GUI. This is not reasonable.
The AA is somewhat unpredictable with regard to picking up calls and sometimes results in a busy tone and dropped call, even if the call is the ONLY call on the system. Sometimes the prompts are garbled and sometimes the AA does not even pick up.
Steering digit redial issue - still not addressed. Redial on hybrid mode is useless, as is the phonebook.
Caller ID only works part of the time, yet on every other system I have ever used, it works 100% of the time. This is not acceptable.
Answered calls on shared FXO lines show as MISSED on other stations with those lines. The workaround: remove the missed calls display feature. This is not acceptable.
Thus UC320 is not happy unless it is the only router, DHCP and DNS client on the LAN. The grayfield implementation appears to fail no matter what LAN topology and equipment are used. This device is far from friendly to the typical SBS or existing LAN with a dedicated DNS and/or DHCP server.
The handsets have a cheap feel to them compared to the Avaya and other competitors phones.
The sound quality of the ringtones is almost laughable if not sad
The speakerphone quality and overall voice quality are not as good as the competition's.
The filtering functionality of the logging feature does not appear to work properly
Firmware updates often result in a HANG condition where either the GUI needs reset, the system needs a physical reset and/or sometimes defaulted
Firewall port forwarding rule oddities where a rule is deleted from the gui but is still active in the firewall, yet the inability to easily use another data router to work around this problem.
The inability of the device to properly use the LAN port for INTERNET based functionality (Time for example) if the WAN port is NOT connected,
countless other 'issues" raised in the support forum and other venues...
These are ALL very basic functions that one would expect to be fixed BEFORE a basic telephone system platform is released for production. It is absolutely unreasonable for a CUSTOMER to have to put up with a system this buggy and it is absolutely unreasonable for a partner to have to devote this much time and money to getting system to work at even a very basic level of functionality.
To repeat the scenario: This config is as basic as it gets running 2.1.3(0) with (3) system phones, (3) users, (2) pots trunks and that's it. There are no odd call routing scenarios, no complex AA rules or schedules (in fact the AA is defaulted, including prompts). All (3) system phones have BOTH shared FXO lines (KEY MODE). Each and every firmware version has been tried and the system has been defaulted numerous times. The system fails to meet even the most basic expectations of myself or the end user and has become a sore spot between our company and a very good client.
I am somewhat baffled, if not outright bothered by the fact that this device is riddled with so many problems and the fixes are taking so long to be implemented, if at all. I have been asked (ordered) by the customer to get this "hunk of crap" out of their office and replace it with something that works "at no additional cost". I could not agree with the customer more...
A very unhappy Cisco Partner.
William BurnettTo William (and Cisco,)
Honestly, I like Cisco.
I like their "openess" (you can find documentation and help on almost anything anywhere), the contribution they make to industry by their huge R&D effort (more than all their competition combined....or so I've been told...), the accessibility and responsiveness of some of their key people in the distribution channel, and yes, I like the ecosystem in terms of support, tons of free education and sales support for both their SMB and classic enterprise solutions.
Having said that, I thank God for people like William Burnett, who I am sure opened the eyes of many partners about the things that are horrendously wrong with some of the products in the SMB portfolio, most notably the UC320. I think it is fair to say, that William has effectively "killed" it (the UC320) in it's present incarnation. That is, unless Cisco, decides to really rise to the challenge and fix a product that at first seemed ideal for the small enterprise, but which was poorly implemented in terms of QC and in some cases design.
We certainly are not going to be touching the UC320 with a 10ft pole now Nobody wants (or can afford to) get a bad name by selling "trouble" to your Mom&Pop shops or to people whose trust you worked hard to gain and who are really depending on you to deliver. Not in this economy....not ever.
Coming from a Nortel telephony background, its really hard to accept that having to respond to trouble calls or complaints continuously from customers when Nortel products worked so reliably. In fact, Nortel Norstar is so reliable as a key system that people joke , that's why they went out of business, they couldn't generate enough turnover in new sales on account of people holding on to their Norstar's forever.
As a seller/installer/user of Cisco voice (UC540) and CME there are a couple recommendations I would like to make to Cisco:
1)Private line emulation - inability to transfer or conference calls on a private line. (using the TRUNK XX command) on the CME/UC500 platforms needs to be significantly improved in order to keep up with the competition:
for one, when you select a private line and make a call you cannot transfer that call. Every other system I have worked with allows you to do this. This for me is a glaring "defect/design flaw". I spent a lot of time trying to get this "fixed" as I couldnt believe that Cisco would just omit such a basic function when all their competition has it. (You dont even think about this when dealing with other systems.) Its just expected.
2)Private line emulation - Inability to reflect the dialed number in the Call Detail Records for calls made via a "private line". If you select a private line on the UC500 or CME and make a call, the dialed number would not show up in the CDR. I have programmed systems from Nortel (Norstar, BCM,CS1000), Avaya - (IP Office 500, Partner Plus, and S8x00 Communication Servers) as well as various systems from Mitel and
Panasonic . The CDR packages for these systems are very well implemented and documented. Cisco's systems are well documented as well, but this is an area of the implementation where Cisco falls behind the competition. I am sure this can be fixed, but for some reason, despite a number of requests, it hasnt.
In trying to understand why it is Cisco, with such a huge R&D budget, can't seem to get some things working properly that the competiton has long ago solved and moved on with, I have come to the conclusion that it must be that Cisco propably didnt tap enough of the right (human) resources when it was developing its voice portfolio, and the lack of industry experience shows up in some random places. Sad to say, not paying attention to some of these details, to real world usage scenarios, makes what would be an otherwise super product, just good enough.
Cisco is the biggest networking vendor on the planet. People have a right to have high exectations of Cisco. Their marketing also conditions users and partners to expect more when using their solutions. While we accept that no one is perfect, not even the mighty Cisco, I think most of the complaints and dissapointment expressed in this forum, on this particular thread, are justified because there is a strong feeling that if Cisco can be such a trailblazer with their enterprise portfolio, that they should have understood the importance of ensuring and enforcing good quality control in the design and manufacture of the SMB portfolio. I honestly hope someone from "Corporate" or high enough to make a differnce, looks at this thread started by William and uses it to inspire the will to fix what needs to be fixed to redeem the UC320 in whatever incarnation, in the eyes of its partners (even former ones....such as William)and customers. This is beginning to look like a textbook case of how not to do product development. -
Help with a hangman class with Gui
Gah, so I'm creating a Java Hangman program using a gui program. Everything was working fine till I started adding the program to the gui. I'm hopelessly confused, and I can't seem to get it working. Help appreciated! Thanks guys... I'm really bad at this, sorry for the noob question.
import java.awt.BorderLayout;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.io.File;
import java.util.Random;
import java.util.Scanner;
import javax.accessibility.AccessibleContext;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.plaf.PanelUI;
public class hmg extends JPanel {
private char[] word;
private int Misses;
private int myWordIndex;
private int index;
private boolean[] used;
protected Image[] i = new Image[8];
protected Image[] s = new Image[3];
private final static char NADA = '_';
private final static int GUESSES = 8;
private String fileName;
i[0] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang1.jpg");
i[1] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang2.jpg");
i[2] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang3.jpg");
i[3] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hange4.jpg");
i[4] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang5.jpg");
i[5] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang6.jpg");
i[6] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang7.jpg");
i[7] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang8.jpg");
s[0] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
s[1] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
s[2] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
protected int x = 0;
protected ImageIcon icon = new ImageIcon(i[x++]);
protected ImageIcon icon2 = new ImageIcon(s[x++]);
private JLabel j = new JLabel(icon);
private JButton b = new JButton();
private JLabel a = new JLabel();
private String[] wordArray;
private String wordChosen;
public void paintComponent(Graphics g) {
super.paintComponents(g);
public hmg() {
this.add(j);
JButton guess = new JButton("The Click of Faith!");
this.add(guess, BorderLayout.WEST);
guess.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
if (!(x == i.length)) {
icon = new ImageIcon(i[x++]);
j.setIcon(icon);
JButton guess2 = new JButton("Click here if your almost dead! ");
this.add(guess2, BorderLayout.WEST);
guess2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
icon2 = new ImageIcon(s[x++]);
j.setIcon(icon);
this.add(a, BorderLayout.SOUTH);
a.setText(showWord());
a.setText(play());
Misses = 0;
index = 0;
used = new boolean[Character.MAX_VALUE];
// public void actionPerformed(ActionEvent arg0) {
// if (!(x == i.length)) {
// icon = new ImageIcon(i[x++]);
// j.setIcon(icon);
private void clear() {
int k;
for (k = 0; k < Character.MAX_VALUE; k++) {
used[k] = false;
word = new char[myWords[myWordIndex].length()];
for (k = 0; k < word.length; k++) {
word[k] = NADA;
private void guess(char ch) {
int b;
boolean charFound = false;
ch = Character.toLowerCase(ch);
for (b = 0; b < word.length; b++) {
if (!used[ch] && myWords[index].charAt(b) == ch) {
word[b] = ch;
charFound = true;
if (!used[ch] && !charFound) {
Misses++;
used[ch] = true;
private void chooseRandomWord()
// myWords[];
// loadFileList();
Random generator = new Random();
int x = generator.nextInt(wordArray.length);
wordChosen = wordArray[x];
//public void processFile(String commonWords) {
// wordArray = commonWords.split(",");
//private String[] loadFileList() {
// try
// fileName = "C:\\Documents and Settings\\mfleming\\Desktop\\Wordlist";
// File file = new File("C:\\Documents and
// Settings\\mfleming\\Desktop\\Wordlist");
// if(file.exists());
// Scanner scan = new Scanner(file);
// while(scan.hasNext())
// String word = scan.next();
// processFile(word);
// } catch (Exception e)
// e.printStackTrace();
// return wordArray;
// public void add() {
// try {
// Scanner s = new Scanner(new File("Wordlist"));
// while (s.hasNext())
// } catch (Exception e) {
private String showWord() {
int k;
String temp = "";
for (k = 0; k < word.length; k++) {
temp +=word[k];
// System.out.print(word[k] + " ");
return temp;
// return showWord();
// System.out.println(" \nYou have exactly " + (GUESSES - Misses)
// + " guesses left! Time is running out! Cue Music LOL ");
private boolean wordGuessed() {
int a;
for (a = 0; a < word.length; a++) {
if (word[a] == NADA) {
return false;
return true;
// .setIcon --- Put image.
public String play() {
clear();
String temp = "";
while (true) {
// showWord();
a.setText(showWord());
//May not have to return string.
// System.out
// .print("Your guess shall be? 1234567890abcdefhijklmnopqrstuvqxyz hA! Guess... it's simply up to you!");
String s = Blah.readString();
if (s.length() > 0) {
guess(s.charAt(0));
if (Misses >= GUESSES) {
// System.out.println("You killed your hangman because....");
// System.out.println(storeWord);
break;
} else if (wordGuessed()) {
// System.out.println("You win. You suck. LOL. ><");
// System.out.println(word);
break;
index = (index + 1) / myWords.length;
return temp;
// public String storeWord() {
// return SW;
public static final void main(String args[]) {
hmg hmg = new hmg();
hmg.play();
private class MousePressedListener implements MouseListener {
public void mousePressed(MouseEvent e) {
if (e.getButton() == e.BUTTON1) {
((JButton) e.getSource()).setText("X");
if (e.getButton() == e.BUTTON3) {
((JButton) e.getSource()).setText("O");
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseClicked(java.awt.event.MouseEvent)
public void mouseClicked(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseEntered(java.awt.event.MouseEvent)
public void mouseEntered(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseExited(java.awt.event.MouseEvent)
public void mouseExited(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseReleased(java.awt.event.MouseEvent)
public void mouseReleased(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.Component#getAccessibleContext()
public AccessibleContext getAccessibleContext() {
// TODO Auto-generated method stub
return super.getAccessibleContext();
* (non-Javadoc)
* @see javax.swing.JPanel#getUI()
public PanelUI getUI() {
// TODO Auto-generated method stub
return super.getUI();
* (non-Javadoc)
* @see javax.swing.JComponent#getUIClassID()
public String getUIClassID() {
// TODO Auto-generated method stub
return super.getUIClassID();
* (non-Javadoc)
* @see java.awt.Component#paramString()
protected String paramString() {
// TODO Auto-generated method stub
return super.paramString();
* (non-Javadoc)
* @see javax.swing.JPanel#setUI(javax.swing.plaf.PanelUI)
public void setUI(PanelUI arg0) {
// TODO Auto-generated method stub
super.setUI(arg0);
* (non-Javadoc)
* @see javax.swing.JComponent#updateUI()
public void updateUI() {
// TODO Auto-generated method stub
super.updateUI();
private String myWords[] = { "analysis", "approach", "area", "assessment",
"assume", "authority ", "available", "benefit ", "concept ",
"consistent", "constitutional", "context", "contract", "create",
"data", "definition", "derived ", "distribution ", "economic",
"environment ", "established", "estimate ", "evidence", "export",
"factors", "financial", "formula", "function", "identified",
"income", "indicate ", "individual ", "interpretation",
"involved", "issues", "labour", "legal", "legislation", "major ",
"method", "occur", "percent ", "period", "policy", "principle",
"procedure", "process", "required", "research", "response", "role",
"section", "sector", "significant ", "similar", "source",
"specific", "structure", "theory", "variables", "achieve ",
"acquisition", "administration ", "affect", "appropriate ",
"aspects", "assistance ", "categories", "chapter", "commission",
"community", "complex ", "computer ", "conclusion", "conduct",
"consequences", "construction", "consumer ", "credit", "cultural ",
"design", "distinction", "elements ", "equation", "evaluation ",
"features ", "final", "focus", "impact", "injury", "institute ",
"investment", "items", "journal ", "maintenance", "normal",
"obtained ", "participation", "perceived ", "positive ",
"potential", "previous", "primary ", "purchase ", "range ",
"region", "regulations", "relevant ", "resident", "resources",
"restricted ", "security ", "sought", "select", "site",
"strategies", "survey", "text", "traditional", "transfer",
"alternative", "circumstances ", "comments", "compensation",
"components", "consent", "considerable", "constant ",
"constraints", "contribution", "convention ", "coordination",
"core", "corporate ", "corresponding", "criteria", "deduction",
"demonstrate ", "document", "dominant", "emphasis ", "ensure",
"excluded", "framework ", "funds", "illustrated ", "immigration",
"implies", "initial ", "instance ", "interaction", "justification",
"layer", "link", "location", "maximum ", "minorities", "negative ",
"outcomes", "partnership", "philosophy ", "physical ",
"proportion ", "published ", "reaction", "registered ", "reliance",
"removed", "scheme", "sequence", "sex", "shift", "specified ",
"sufficient", "task", "technical ", "techniques", "technology",
"validity", "volume", "access", "adequate", "annual", "apparent",
"approximated", "attitudes ", "attributed ", "civil", "code",
"commitment ", "communication", "concentration", "conference ",
"contrast ", "cycle", "debate", "despite ", "dimensions ",
"domestic ", "emerged ", "error", "ethnic", "goals", "granted",
"hence", "hypothesis ", "implementation", "implications",
"imposed", "integration", "internal ", "investigation", "job",
"label", "mechanism ", "obvious", "occupational ", "option",
"output", "overall ", "parallel", "parameters", "phase",
"predicted", "principal", "prior", "professional", "project",
"promote", "regime", "resolution ", "retained", "series",
"statistics ", "status", "stress", "subsequent", "sum", "summary",
"undertaken ", "academic ", "adjustment ", "alter ", "amendment ",
"aware ", "capacity ", "challenge ", "clause ", "compounds ",
"conflict ", "consultation ", "contact ", "decline ",
"discretion ", "draft ", "enable ", "energy ", "enforcement ",
"entities ", "equivalent ", "evolution ", "expansion ",
"exposure ", "external ", "facilitate ", "fundamental ",
"generated ", "generation ", "image ", "liberal", "licence ",
"logic ", "marginal ", "medical ", "mental ", "modified ",
"monitoring ", "network ", "notion ", "objective ", "orientation ",
"perspective ", "precise ", "prime ", "psychology ", "pursue ",
"ratio ", "rejected ", "revenue ", "stability ", "styles ",
"substitution ", "sustainable", "symbolic ", "target ",
"transition ", "trend ", "version ", "welfare ", "whereas ",
"abstract ", "accurate ", "acknowledged ", "aggregate ",
"allocation ", "assigned ", "attached ", "author ", "bond ",
"brief ", "capable ", "cited ", "cooperative ", "discrimination ",
"display ", "diversity ", "domain ", "edition ", "enhanced ",
"estate ", "exceed ", "expert ", "explicit ", "federal ", "fees ",
"flexibility ", "furthermore ", "gender ", "ignored ",
"incentive ", "incidence ", "incorporated ", "index ",
"inhibition ", "initiatives ", "input ", "instructions ",
"intelligence ", "interval ", "lecture ", "migration ", "minimum ",
"ministry ", "motivation ", "neutral ", "nevertheless ",
"overseas ", "preceding ", "presumption ", "rational ",
"recovery ", "revealed ", "scope ", "subsidiary ", "tapes ",
"trace ", "transformation ", "transport ", "underlying ",
"utility ", "adaptation ", "adults ", "advocate ", "aid ",
"channel ", "chemical", "classical ", "comprehensive ",
"comprise ", "confirmed ", "contrary ", "converted ", "couple ",
"decades ", "definite", "deny ", "differentiation ", "disposal ",
"dynamic ", "eliminate ", "empirical ", "equipment ", "extract ",
"file ", "finite ", "foundation ", "global ", "grade ",
"guarantee ", "hierarchical ", "identical ", "ideology ",
"inferred ", "innovation ", "insert ", "intervention ",
"isolated ", "media ", "mode ", "paradigm ", "phenomenon ",
"priority ", "prohibited ", "publication ", "quotation ",
"release ", "reverse ", "simulation ", "solely ", "somewhat ",
"submitted ", "successive ", "survive ", "thesis ", "topic ",
"transmission ", "ultimately ", "unique ", "visible ",
"voluntary ", "abandon ", "accompanied ", "accumulation ",
"ambiguous ", "appendix ", "appreciation ", "arbitrary ",
"automatically ", "bias ", "chart ", "clarity", "conformity ",
"commodity ", "complement ", "contemporary ", "contradiction ",
"crucial ", "currency ", "denote ", "detected ", "deviation ",
"displacement ", "dramatic ", "eventually ", "exhibit ",
"exploitation ", "fluctuations ", "guidelines ", "highlighted ",
"implicit ", "induced ", "inevitably ", "infrastructure ",
"inspection ", "intensity ", "manipulation ", "minimised ",
"nuclear ", "offset ", "paragraph ", "plus ", "practitioners ",
"predominantly ", "prospect ", "radical ", "random ",
"reinforced ", "restore ", "revision ", "schedule ", "tension ",
"termination ", "theme ", "thereby ", "uniform ", "vehicle ",
"via ", "virtually ", "widespread ", "visual ", "accommodation ",
"analogous ", "anticipated ", "assurance ", "attained ", "behalf ",
"bulk ", "ceases ", "coherence ", "coincide ", "commenced ",
"incompatible ", "concurrent ", "confined ", "controversy ",
"conversely ", "device ", "devoted ", "diminished ", "distorted",
"distortion", "equal", "figures", "duration ", "erosion ",
"ethical ", "format ", "founded ", "inherent ", "insights ",
"integral ", "intermediate ", "manual ", "mature ", "mediation ",
"medium ", "military ", "minimal ", "mutual ", "norms ",
"overlap ", "passive ", "portion ", "preliminary ", "protocol ",
"qualitative ", "refine ", "relaxed ", "restraints ",
"revolution ", "rigid ", "route ", "scenario ", "sphere ",
"subordinate ", "supplementary ", "suspended ", "team ",
"temporary ", "trigger ", "unified ", "violation ", "vision ",
"adjacent ", "albeit ", "assembly ", "collapse ", "colleagues ",
"compiled ", "conceived ", "convinced ", "depression ",
"encountered ", "enormous ", "forthcoming ", "inclination ",
"integrity ", "intrinsic ", "invoked ", "levy ", "likewise ",
"nonetheless ", "notwithstanding ", "odd ", "ongoing ", "panel ",
"persistent ", "posed ", "reluctant ", "straightforward ",
"undergo ", "whereby ", "noob", "frag", "punish", "lamer", "noobs",
"knife", "shank", "humvee", "sniper", "don't", "run", "you'll",
"only", "die", "tired", "LOL", "ROFL", "GG", "FTW", "indeed",
"sure", "yeah", "yea", "hi", "hello", };
DRIVER CLASS
import java.awt.BorderLayout;
import java.awt.Container;
import javax.swing.JFrame;
public class HangManGuiTest {
public static void main(String[] args) {
// hangmangui hmg = new hangmangui();
hmg hmg = new hmg();
JFrame frame = new JFrame("Hangman! DJ Joker[8]Baller");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(hmg);
frame.pack();
frame.show();
// JFrame j = new JFrame();
// Listeners - Control everything - Call stuff from hmg.
// frame.getContentPane().add(hmg);
// j.setSize(500, 500);
// j.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// j.setVisible(true);
hmg.play();
Message was edited by:
joker8ballerHey! Thanks for the tip...
Anyways, I fixed all of the errors (T hank god) and now all I have t o do is add the text to the gui. Help for adding the text into the gui. When I run it, it runs a gui, and it shows the spaces, but when I put in input.. nothing shows up and nothing plays.
So I'm going to use a.setText... for showWord and and play()... Is there anything else I woiuld need to do?
import java.awt.BorderLayout;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.io.File;
import java.util.Random;
import java.util.Scanner;
import javax.accessibility.AccessibleContext;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.plaf.PanelUI;
public class hmg extends JPanel {
private char[] word;
private int Misses;
private int myWordIndex;
private int index;
private boolean[] used;
protected Image[] i = new Image[8];
protected Image[] s = new Image[3];
private final static char NADA = '_';
private final static int GUESSES = 8;
private String fileName;
i[0] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang1.jpg");
i[1] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang2.jpg");
i[2] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang3.jpg");
i[3] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hange4.jpg");
i[4] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang5.jpg");
i[5] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang6.jpg");
i[6] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang7.jpg");
i[7] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hang8.jpg");
s[0] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
s[1] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
s[2] = Toolkit.getDefaultToolkit().getImage(
"C:\\Documents and Settings\\mfleming\\Desktop\\hacks.jpg");
protected int x = 0;
protected ImageIcon icon = new ImageIcon(i[x++]);
protected ImageIcon icon2 = new ImageIcon(s[x++]);
private JLabel j = new JLabel(icon);
private JButton b = new JButton();
private JLabel a = new JLabel();
private String[] wordArray;
private String wordChosen;
public void paintComponent(Graphics g) {
super.paintComponents(g);
public hmg() {
this.add(j);
JButton guess = new JButton("The Click of Faith!");
this.add(guess, BorderLayout.WEST);
guess.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
if (!(x == i.length)) {
icon = new ImageIcon(i[x++]);
j.setIcon(icon);
JButton guess2 = new JButton("Click here if your almost dead! ");
this.add(guess2, BorderLayout.WEST);
guess2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
icon2 = new ImageIcon(s[x++]);
j.setIcon(icon);
// this.add(a, BorderLayout.SOUTH);
// a.setText(clear());
// a.setText(showWord());
// a.setText(play());
Misses = 0;
index = 0;
used = new boolean[Character.MAX_VALUE];
// public void actionPerformed(ActionEvent arg0) {
// if (!(x == i.length)) {
// icon = new ImageIcon(i[x++]);
// j.setIcon(icon);
private void clear() {
int k;
for (k = 0; k < Character.MAX_VALUE; k++) {
used[k] = false;
word = new char[myWords[myWordIndex].length()];
System.out.println(word.length);
for (k = 0; k < word.length; k++) {
word[k] = NADA;
private void guess(char ch) {
int b;
boolean charFound = false;
ch = Character.toLowerCase(ch);
for (b = 0; b < word.length; b++) {
if (!used[ch] && myWords[index].charAt(b) == ch) {
word[b] = ch;
charFound = true;
if (!used[ch] && !charFound) {
Misses++;
used[ch] = true;
private void chooseRandomWord()
// myWords[];
// loadFileList();
Random generator = new Random();
int x = generator.nextInt(wordArray.length);
wordChosen = wordArray[x];
//public void processFile(String commonWords) {
// wordArray = commonWords.split(",");
//private String[] loadFileList() {
// try
// fileName = "C:\\Documents and Settings\\mfleming\\Desktop\\Wordlist";
// File file = new File("C:\\Documents and
// Settings\\mfleming\\Desktop\\Wordlist");
// if(file.exists());
// Scanner scan = new Scanner(file);
// while(scan.hasNext())
// String word = scan.next();
// processFile(word);
// } catch (Exception e)
// e.printStackTrace();
// return wordArray;
// public void add() {
// try {
// Scanner s = new Scanner(new File("Wordlist"));
// while (s.hasNext())
// } catch (Exception e) {
private String showWord() {
int k;
String temp = "";
for (k = 0; k < word.length; k++) {
temp +=word[k];
// System.out.print(word[k] + " ");
return temp;
// return showWord();
// System.out.println(" \nYou have exactly " + (GUESSES - Misses)
// + " guesses left! Time is running out! Cue Music LOL ");
private boolean wordGuessed() {
int a;
for (a = 0; a < word.length; a++) {
if (word[a] == NADA) {
return false;
return true;
// .setIcon --- Put image.
public String play() {
clear();
String temp = "";
while (true) {
// showWord();
a.setText(showWord());
//May not have to return string.
JOptionPane.showInputDialog("Your guess shall be? 1234567890abcdefhijklmnopqrstuvqxyz hA! Guess... its simply up to you!");
// System.out
// .print("Your guess shall be? 1234567890abcdefhijklmnopqrstuvqxyz hA! Guess... it's simply up to you!");
String s = Blah.readString();
if (s.length() > 0) {
guess(s.charAt(0));
if (Misses >= GUESSES) {
JOptionPane.showMessageDialog(null,"You killed your hangman because....");
// System.out.println("You killed your hangman because....");
// System.out.println(storeWord);
break;
} else if (wordGuessed()) {
JOptionPane.showMessageDialog(null, "You win. You suck. LOL. ><");
// System.out.println("You win. You suck. LOL. ><");
// System.out.println(word);
break;
index = (index + 1) / myWords.length;
return temp;
// public String storeWord() {
// return SW;
public static final void main(String args[]) {
hmg hmg = new hmg();
hmg.play();
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseClicked(java.awt.event.MouseEvent)
public void mouseClicked(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseEntered(java.awt.event.MouseEvent)
public void mouseEntered(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseExited(java.awt.event.MouseEvent)
public void mouseExited(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.event.MouseListener#mouseReleased(java.awt.event.MouseEvent)
public void mouseReleased(MouseEvent arg0) {
// TODO Auto-generated method stub
* (non-Javadoc)
* @see java.awt.Component#getAccessibleContext()
public AccessibleContext getAccessibleContext() {
// TODO Auto-generated method stub
return super.getAccessibleContext();
* (non-Javadoc)
* @see javax.swing.JPanel#getUI()
public PanelUI getUI() {
// TODO Auto-generated method stub
return super.getUI();
* (non-Javadoc)
* @see javax.swing.JComponent#getUIClassID()
public String getUIClassID() {
// TODO Auto-generated method stub
return super.getUIClassID();
* (non-Javadoc)
* @see java.awt.Component#paramString()
protected String paramString() {
// TODO Auto-generated method stub
return super.paramString();
* (non-Javadoc)
* @see javax.swing.JPanel#setUI(javax.swing.plaf.PanelUI)
public void setUI(PanelUI arg0) {
// TODO Auto-generated method stub
super.setUI(arg0);
* (non-Javadoc)
* @see javax.swing.JComponent#updateUI()
public void updateUI() {
// TODO Auto-generated method stub
super.updateUI();
private String myWords[] = { "approach", "area", "assessment",
"assume", "authority ", "available", "benefit ", "concept ",
"consistent", "constitutional", "context", "contract", "create",
"data", "definition", "derived ", "distribution ", "economic",
"environment ", "established", "estimate ", "evidence", "export",
"factors", "financial", "formula", "function", "identified",
"income", "indicate ", "individual ", "interpretation",
"involved", "issues", "labour", "legal", "legislation", "major ",
"method", "occur", "percent ", "period", "policy", "principle",
"procedure", "process", "required", "research", "response", "role",
"section", "sector", "significant ", "similar", "source",
"specific", "structure", "theory", "variables", "achieve ",
"acquisition", "administration ", "affect", "appropriate ",
"aspects", "assistance ", "categories", "chapter", "commission",
"community", "complex ", "computer ", "conclusion", "conduct",
"consequences", "construction", "consumer ", "credit", "cultural ",
"design", "distinction", "elements ", "equation", "evaluation ",
"features ", "final", "focus", "impact", "injury", "institute ",
"investment", "items", "journal ", "maintenance", "normal",
"obtained ", "participation", "perceived ", "positive ",
"potential", "previous", "primary ", "purchase ", "range ",
"region", "regulations", "relevant ", "resident", "resources",
"restricted ", "security ", "sought", "select", "site",
"strategies", "survey", "text", "traditional", "transfer",
"alternative", "circumstances ", "comments", "compensation",
"components", "consent", "considerable", "constant ",
"constraints", "contribution", "convention ", "coordination",
"core", "corporate ", "corresponding", "criteria", "deduction",
"demonstrate ", "document", "dominant", "emphasis ", "ensure",
"excluded", "framework ", "funds", "illustrated ", "immigration",
"implies", "initial ", "instance ", "interaction", "justification",
"layer", "link", "location", "maximum ", "minorities", "negative ",
"outcomes", "partnership", "philosophy ", "physical ",
"proportion ", "published ", "reaction", "registered ", "reliance",
"removed", "scheme", "sequence", "sex", "shift", "specified ",
"sufficient", "task", "technical ", "techniques", "technology",
"validity", "volume", "access", "adequate", "annual", "apparent",
"approximated", "attitudes ", "attributed ", "civil", "code",
"commitment ", "communication", "concentration", "conference ",
"contrast ", "cycle", "debate", "despite ", "dimensions ",
"domestic ", "emerged ", "error", "ethnic", "goals", "granted",
"hence", "hypothesis ", "implementation", "implications",
"imposed", "integration", "internal ", "investigation", "job",
"label", "mechanism ", "obvious", "occupational ", "option",
"output", "overall ", "parallel", "parameters", "phase",
"predicted", "principal", "prior", "professional", "project",
"promote", "regime", "resolution ", "retained", "series",
"statistics ", "status", "stress", "subsequent", "sum", "summary",
"undertaken ", "academic ", "adjustment ", "alter ", "amendment ",
"aware ", "capacity ", "challenge ", "clause ", "compounds ",
"conflict ", "consultation ", "contact ", "decline ",
"discretion ", "draft ", "enable ", "energy ", "enforcement ",
"entities ", "equivalent ", "evolution ", "expansion ",
"exposure ", "external ", "facilitate ", "fundamental ",
"generated ", "generation ", "image ", "liberal", "licence ",
"logic ", "marginal ", "medical ", "mental ", "modified ",
"monitoring ", "network ", "notion ", "objective ", "orientation ",
"perspective ", "precise ", "prime ", "psychology ", "pursue ",
"ratio ", "rejected ", "revenue ", "stability ", "styles ",
"substitution ", "sustainable", "symbolic ", "target ",
"transition ", "trend ", "version ", "welfare ", "whereas ",
"abstract ", "accurate ", "acknowledged ", "aggregate ",
"allocation ", "assigned ", "attached ", "author ", "bond ",
"brief ", "capable ", "cited ", "cooperative ", "discrimination ",
"display ", "diversity ", "domain ", "edition ", "enhanced ",
"estate ", "exceed ", "expert ", "explicit ", "federal ", "fees ",
"flexibility ", "furthermore ", "gender ", "ignored ",
"incentive ", "incidence ", "incorporated ", "index ",
"inhibition ", "initiatives ", "input ", "instructions ",
"intelligence ", "interval ", "lecture ", "migration ", "minimum ",
"ministry ", "motivation ", "neutral ", "nevertheless ",
"overseas ", "preceding ", "presumption ", "rational ",
"recovery ", "revealed ", "scope ", "subsidiary ", "tapes ",
"trace ", "transformation ", "transport ", "underlying ",
"utility ", "adaptation ", "adults ", "advocate ", "aid ",
"channel ", "chemical", "classical ", "comprehensive ",
"comprise ", "confirmed ", "contrary ", "converted ", "couple ",
"decades ", "definite", "deny ", "differentiation ", "disposal ",
"dynamic ", "eliminate ", "empirical ", "equipment ", "extract ",
"file ", "finite ", "foundation ", "global ", "grade ",
"guarantee ", "hierarchical ", "identical ", "ideology ",
"inferred ", "innovation ", "insert ", "intervention ",
"isolated ", "media ", "mode ", "paradigm ", "phenomenon ",
"priority ", "prohibited ", "publication ", "quotation ",
"release ", "reverse ", "simulation ", "solely ", "somewhat ",
"submitted ", "successive ", "survive ", "thesis ", "topic ",
"transmission ", "ultimately ", "unique ", "visible ",
"voluntary ", "abandon ", "accompanied ", "accumulation ",
"ambiguous ", "appendix ", "appreciation ", "arbitrary ",
"automatically ", "bias ", "chart ", "clarity", "conformity ",
"commodity ", "complement ", "contemporary ", "contradiction ",
"crucial ", "currency ", "denote ", "detected ", "deviation ",
"displacement ", "dramatic ", "eventually ", "exhibit ",
"exploitation ", "fluctuations ", "guidelines ", "highlighted ",
"implicit ", "induced ", "inevitably ", "infrastructure ",
"inspection ", "intensity ", "manipulation ", "minimised ",
"nuclear ", "offset ", "paragraph ", "plus ", "practitioners ",
"predominantly ", "prospect ", "radical ", "random ",
"reinforced ", "restore ", "revision ", "schedule ", "tension ",
"termination ", "theme ", "thereby ", "uniform ", "vehicle ",
"via ", "virtually ", "widespread ", "visual ", "accommodation ",
"analogous ", "anticipated ", "assurance ", "attained ", "behalf ",
"bulk ", "ceases ", "coherence ", "coincide ", "commenced ",
"incompatible ", "concurrent ", "confined ", "controversy ",
"conversely ", "device ", "devoted ", "diminished ", "distorted",
"distortion", "equal", "figures", "duration ", "erosion ",
"ethical ", "format ", "founded ", "inherent ", "insights ",
"integral ", "intermediate ", "manual ", "mature ", "mediation ",
"medium ", "military ", "minimal ", "mutual ", "norms ",
"overlap ", "passive ", "portion ", "preliminary ", "protocol ",
"qualitative ", "refine ", "relaxed ", "restraints ",
"revolution ", "rigid ", "route ", "scenario ", "sphere ",
"subordinate ", "supplementary ", "suspended ", "team ",
"temporary ", "trigger ", "unified ", "violation ", "vision ",
"adjacent ", "albeit ", "assembly ", "collapse ", "colleagues ",
"compiled ", "conceived ", "convinced ", "depression ",
"encountered ", "enormous ", "forthcoming ", "inclination ",
"integrity ", "intrinsic ", "invoked ", "levy ", "likewise ",
"nonetheless ", "notwithstanding ", "odd ", "ongoing ", "panel ",
"persistent ", "posed ", "reluctant ", "straightforward ",
"undergo ", "whereby ", "noob", "frag", "punish", "lamer", "noobs",
"knife", "shank", "humvee", "sniper", "don't", "run", "you'll",
"only", "die", "tired", "LOL", "ROFL", "GG", "FTW", "indeed",
"sure", "yeah", "yea", "hi", "hello", };
}Message was edited by:
joker8baller -
Context Object not found in Integration Directory
Hi experts,
I am trying to do a content based routing scenario using BPM.
The Scenario is
ASYNC -> SYNC -> ASYNC
The synchronous step here refers to a rfc call. The response from this determines the ASYNC systems to which data should be sent.
I have declared container objects REQ and RESP accordingly in the BPM. Also have a Context object for the response.
My issue is, while doing receiver determination, I am unable to find neither RESP message type ( for XPATH ) nor a context object declared in ESR for creating an expression.
Could someone please help/guide me to resolve this.
Please let me know if I was not clear.
Thank you.Hi,
I am on 7.11.
The problem I am facing is that I am unable to find the corresponding structure to be used for XPATH.
As mentioned, the scenario is
ASYNC -> SYNC -> ASYNC's.
I have two container variables : REq and RESP. RESP is populated after the SYNC call. The message type for the subsequent ASYNC is REQ ( step description ).
So when I do receiver determination for ASYNC, I am able to see only REQ message type for building the expression. ( Obvious )
But I would need RESP to build it.
Please advise. -
ALV display for row s and columns in this format.have ur full points..
Hi ALL
I have to dispalay data in the ALV format as :
Basic
DA
HRA
PF
VPF
20000
500
5000
| 1500 | 600 | |
Details : Basic HRA in one Row and PF , VPF in second Row.
The Amount regarding htese fields are also displayed in the next rows for all emp. numbers.
its urgent for me and need helpful answers...
Regards
Lakhansee the attached code it will display the hierarchial display as per your need
change the internal tables with dat of your own orgn structure and pass it to the fun module.
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB01-+
AND zpallet_id = t_data_tab-lgtor."MB01+
MB01 - INSERT START
If pallet number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently in a
specified pallet
IF NOT s_palno IS INITIAL AND not t_data_tab-zpallet_no in s_palno
AND w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
ENDIF.
MB01 - INSERT END
IF NOT t_data_tab-zpallet_no IN s_palno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
IF sy-subrc = 0. "mb01+
perform read_van. "MB01+
SELECT SINGLE zvan_no zvan_print zeod_print FROM zvantr
INTO (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
WHERE zpallet_no EQ t_data_tab-zpallet_no.
MB01 - INSERT START
If van number specified and
we are in the global route scenario & both doors fall within the
selection criteria, we need to copy the one that is currently on a
specified van
IF NOT s_vanno IS INITIAL AND not t_data_tab-zvan_no in s_vanno AND
w_routetype = '3' .
Switch doors & get 2nd shipment
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
Read subsequent leg shipment
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
IF sy-subrc = 0.
MOVE w_vttp-tknum TO t_data_tab-tknum.
ENDIF.
PERFORM read_pallet. "MB01+
perform read_van.
ENDIF. "mb01-
MB01 - INSERT END
IF NOT t_data_tab-zvan_no IN s_vanno. "TR01+
CONTINUE. "TR01+
ENDIF. "TR01+
ENDIF.
APPEND t_data_tab.
ENDLOOP.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want
these"TR03+
IF s_exidv IS INITIAL. "TR03+
*{ REPLACE UKMK900355 1
*\ LOOP AT it_vepo.
*\ READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
*\ posnr = it_vepo-posnr
*\ BINARY SEARCH. "SUM
*\ IF sy-subrc = 0.
*\ DELETE it_lips INDEX sy-tabix.
*\ ENDIF.
*\ ENDLOOP.
Higher-level HUs can contain more than one delivery item " AS01
LOOP AT it_lips. " AS01
READ TABLE t_vepo_low WITH KEY vbeln = it_lips-vbeln " AS01
posnr = it_lips-posnr. " AS01
CHECK sy-subrc EQ 0. " AS01
DELETE it_lips. " AS01
ENDLOOP. " AS01
*} REPLACE
IF NOT it_lips[] IS INITIAL.
move any unpacked items to the data table
PERFORM move_lips_to_table.
ENDIF.
ENDIF. "TR03+
*<---- TR01+ End
get relevant status icons
PERFORM select_icons.
prepare ALV data
PERFORM prepare_alv.
ENDFORM. " select_data
*& Form select_icons
select icons for display and move data to display table
FORM select_icons.
DATA: w_disp_tab LIKE zpickdisp,
w_disp_head LIKE zpickhead,
w_color LIKE zpickdisp-color,
ov_icon LIKE zpickdisp-ov_icon,
gi_icon LIKE zpickdisp-gi_icon,
to_icon LIKE zpickdisp-to_icon,
lp_icon LIKE zpickdisp-lp_icon,
pc_icon LIKE zpickdisp-pc_icon,
lv_icon LIKE zpickdisp-lv_icon,
vm_icon LIKE zpickdisp-vm_icon,
em_icon LIKE zpickdisp-em_icon,
sp_icon LIKE zpickdisp-sp_icon, " ANV SR#11523
t_ovst_tab LIKE t_disp_tab WITH HEADER LINE.
CONSTANTS: c_col1(3) VALUE 'C10',
c_col2(3) VALUE 'C20'.
SORT t_data_tab BY lgtor vbeln.
w_color = c_col2.
LOOP AT t_data_tab.
AT NEW lgtor.
fill ALV header table
CLEAR w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
APPEND w_disp_head TO t_disp_head.
ENDAT.
goods issue status & overall amber/green only
CASE t_data_tab-wbstk.
WHEN c_c.
MOVE icon_green_light TO gi_icon.
MOVE icon_green_light TO ov_icon.
WHEN OTHERS.
MOVE icon_red_light TO gi_icon.
MOVE icon_yellow_light TO ov_icon.
ENDCASE.
transfer order status
CASE t_data_tab-lvsta.
WHEN c_a.
MOVE icon_red_light TO to_icon.
WHEN c_b.
MOVE icon_yellow_light TO to_icon.
WHEN c_c.
MOVE icon_green_light TO to_icon.
WHEN space.
write N/A
to_icon = 'N/A'.
ENDCASE.
loaded to pallet status
IF NOT t_data_tab-zpallet_no IS INITIAL.
MOVE icon_green_light TO lp_icon.
ELSE.
MOVE icon_red_light TO lp_icon.
ENDIF.
pallet count status
IF NOT t_data_tab-zcount_check IS INITIAL.
MOVE icon_green_light TO pc_icon.
ELSE.
MOVE icon_red_light TO pc_icon.
ENDIF.
loaded to van status
IF NOT t_data_tab-zvan_no IS INITIAL.
MOVE icon_green_light TO lv_icon.
ELSE.
MOVE icon_red_light TO lv_icon.
ENDIF.
van manifest status
IF NOT t_data_tab-zvan_print IS INITIAL.
MOVE icon_green_light TO vm_icon.
ELSE.
MOVE icon_red_light TO vm_icon.
ENDIF.
Start of changes by ANV SR#11523
Shipment status
IF NOT t_data_tab-tknum IS INITIAL.
MOVE icon_green_light TO sp_icon.
ELSE.
MOVE icon_red_light TO sp_icon.
ENDIF.
End of changes by ANV SR#11523
end of day manifest status
IF NOT t_data_tab-zeod_print IS INITIAL.
MOVE icon_green_light TO em_icon.
ELSE.
MOVE icon_red_light TO em_icon.
ENDIF.
move working data table to display table
MOVE-CORRESPONDING t_data_tab TO w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-sp_icon = sp_icon. "ANV SR#11523
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
IF w_disp_tab-packvorschr IS INITIAL.
w_disp_tab-packvorschr = 'N/A'.
ENDIF.
IF w_disp_tab-exidv IS INITIAL.
w_disp_tab-exidv = 'N/A'.
ENDIF.
IF w_disp_tab-zpallet_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zpallet_no.
ENDIF.
IF w_disp_tab-zvan_no IS INITIAL.
WRITE 'N/A' TO w_disp_tab-zvan_no.
ENDIF.
display different color for new doc number
AT END OF vbeln.
IF w_color = c_col1.
w_color = c_col2.
ELSEIF w_color = c_col2.
w_color = c_col1.
ENDIF.
ENDAT.
APPEND w_disp_tab TO t_disp_tab.
CLEAR w_disp_tab.
ENDLOOP.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
DATA: ov_stat_red(1).
CLEAR w_disp_tab.
SORT t_disp_tab BY vbeln.
LOOP AT t_disp_tab INTO w_disp_tab.
AT NEW vbeln.
check all line items for delivery
LOOP AT t_data_tab WHERE vbeln = w_disp_tab-vbeln.
IF t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
EXIT.
ELSE.
leave green/amber status icon as previosly determined
ENDIF.
ENDLOOP.
IF ov_stat_red = c_yes.
set overall status to red for all items in that delivery
CLEAR ov_stat_red.
MOVE icon_red_light TO w_disp_tab-ov_icon.
MODIFY t_disp_tab FROM w_disp_tab TRANSPORTING ov_icon
WHERE vbeln = w_disp_tab-vbeln.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " select_icons
*& Form fill_layout
fill ALV layout parameters
FORM fill_layout.
CLEAR g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
ENDFORM. " fill_layout
*& Form fill_sort
fill ALV sort table
FORM fill_sort.
DATA: w_g_sort TYPE slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
APPEND w_g_sort TO g_sort. -
Can you please provide me with an example to use Traffic lights in ALV list display?
Thanks,
AmitHi,
Description : Pick Status Report
This is an ALV report using the heirarchical ALV list display. The
report selects all deliveries that fulfil the selection criteria
and displays a summary of all items in that delivery with reference
to certain statuses: overall status, goods issue status, transfer
order status, load to pallet status, pallet count status, loaded to
van status, van manifest printed status and end of day manifest
printed status. These statuses have been defined by the business.
There is extra functionality required to trigger printing of the van
and end of day manifests from this report, and to set the loading
end status of a shipment if the last handling unit of a particular
shipment has been loaded onto a van for which the van manifest has
been triggered.
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03 -
Error when using 64-bit host in send port
Guys,
I am trying out a simple message routing scenario. I have created a send pipeline and have used the MIME/SMIME component in the encoding stage of the pipeline. My application has a receive and a send port with receive port configured to receive *.xml documents
and is using XMLReceive pipeline. My send port uses the pipeline I have explained above and contains a filter to BTS.ReceivePortName=="[receive port in the application]". The send port is also configured to use a certificate. The send handler is the 64-bit
BizTalk host. When I drop a message in the receive port, message in the send port gets suspended with error "Retrieving the COM class factory for component with CLSID {254B4003-2AA7-4C82-BB2E-18BA7F22DCD2} failed due to the following error: 80040154
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
" However when I use a 32-bit host message on the send port gets encrypted as I expect. Has anyone faced this issue before and found a solution? BTW I am using BTS 2010 on 64-bit machinehttp://msdn.microsoft.com/en-us/library/aa559177(BTS.10).aspx
This occurs because the MIME pipeline component is not supported in a 64-bit host instance. To resolve this, the host associated with the send and receive handler for the file adapter must be configured as a 32-bit only host. For more information on this
see How to Modify Host Properties. If you already have a 32-bit only host configured on the system and want to use it see Configuring the File Adapter for instructions on configuring the host(s) associated to the file adapter’s send and receive handler.
The following is signature, not part of post
Please mark the post answered your question as the answer, and mark other helpful posts as helpful, so they will appear differently to other users who are visiting your thread for the same problem.
Visual C++ MVP -
Header and item details on same screen in form of two reports
Hello,
I would like to print in a same screen two ALV grid with different command for each.
The two grid will be linked.
One is the header of the datas and the second represent the items of the selected data in the the header grid.
example user will get all sales order details and when user click on any sales order than on the same screen below i get the item data of that sales order...
how can i do that
Do you have any example for me, please ?
Thanks in advance for help,
Best regards,
TaranHi
use ALV hierarchial display function module for this.
see the sample code for this
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
*{ INSERT UKMK900355 4
zhu_to_link, "AS03
*} INSERT
zpallettr,
vttk, "MB01
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel, "RM050906
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor, "MB01
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route, "MB01+
zzexproute LIKE likp-zzexproute, "MB01+
zzroute2 LIKE likp-zzroute2, "MB01+
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE, "ANV SR#11523
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+ -
when i set up a aux send for parallel compression from a snare drum input channel to two aux busses—one for a compressor and a second aux bus for the limiter—and send the outputs of the comp/lim aux busses to the drum buss everything works fine. However, when I solo the comp/lim aux busses the entire drum mix is in the solo as well. Is there an alternative routing scenario?
You still refuse to discuss data versus radio signal.
So, I guess that is that. You have no proof to back up your contention as neither do I.
Granted, from the g device to my Express, it is at g speeds. But, I contend, that once that g radio signal is converted back to data only (now at speed of light) inside the Express, the Express sends that data, via the exclusive “Extended network” connection, to the Extreme, at n speed. It has to as the Extreme will only take n speed.
Sure, it is splitting hairs, if I am right. I am not saying I am. But my idea (before our branch debate on g and n signal versus data upon arrival at the Express) is an interesting way to force old g clients to use only one router. But to force those pesky g clients to use the newer simultaneous dual band Express by setting the Extreme to 5GHz g only was a new solution for me. It worked too. In that case, it is not about minute speed gains or losses but simply letting the g clients have their one party at the Express, which can handle them better when part of an extended network with an older, original Extreme.
It is also far better to just have one Wi-Fi router as, adding Airport routers in an extended network, slows things down 60% or less and requires more "data management overheard", according to Apple*.
It is interesting that they said data management overhead and not radio signal management?
Alternatively, using the “Roaming network” method where the two stations are linked via Ethernet, is an even better option.
* https://support.apple.com/en-gb/HT202056 -
OSPF downward bit in MPLS network
Hi all,
I have an issue with using the OSPF downward bit and hope someone has seen this before. It appears to do nothing in this example to prevent routes being learnt via the wrong path. That is via a backup router that has learnt the route from the site primary router which has received the OSPF route originally redistibuted into OSPF from the PE (with downward bit set).
The docco says:
"The down bit is used between the PE-routers to indicate which routes were inserted into the OSPF topology database from the MPLS VPN super-backbone and thus shall not be redistributed back in the MPLS VPN super-backbone. The PE-router that redistributes the MP-BGP route as OSPF route into the OSPF topology database sets the down bit. Other PE-routers use the down bit to prevent this route from being redistributed back into MP-BGP. "
Therefore I would not expect a route received with the downward bit set to be installed into the route table nor BGP table however the below shows it is? This has essentially created a routing scenario where core routes are learnt via a dual OSPF attached access site.
The PE receiving the incorrect route:
7609#sh ip ospf 116 database summary 192.168.104.0
OSPF Router with ID (10.200.204.116) (Process ID 116)
Summary Net Link States (Area 0)
LS age: 1094
Options: (No TOS-capability, DC, Downward)
LS Type: Summary Links(Network)
Link State ID: 192.168.104.0 (summary Network Number)
Advertising Router: 10.200.212.116
LS Seq Number: 80000013
Checksum: 0xFDB1
Length: 28
Network Mask: /24
MTID: 0 Metric: 1798
7609#sh ip route vrf RED 192.168.104.0
Routing Table: RED
Routing entry for 192.168.104.0/24
Known via "ospf 116", distance 110, metric 1798, type intra area
Redistributing via bgp 100
Advertised by bgp 100 match internal external 1 & 2 nssa-external 1 & 2
Last update from 10.1.59.138 on GigabitEthernet1/0/1.3684, 00:18:23 ago
Routing Descriptor Blocks:
* 10.1.59.138, from 10.200.4.229, 00:18:23 ago, via GigabitEthernet1/0/1.3684
Route metric is 1798, traffic share count is 1
7609#sh ip bgp vpnv4 vrf RED 192.168.104.0
BGP routing table entry for 100:116:192.168.104.0/24, version 195113
Paths: (1 available, best #1, table RED)
Advertised to update-groups:
1
Local
10.1.59.138 from 0.0.0.0 (10.200.0.65)
Origin incomplete, metric 1798, localpref 100, weight 32768, valid, sourced, best
Extended Community: RT:100:116 OSPF DOMAIN ID:0x0005:0x000000740200
OSPF RT:0.0.0.0:2:0 OSPF ROUTER ID:10.200.204.116:512
mpls labels in/out 312/nolabel
7609#
Regards,
Kent.Ive implemented what I consider to be a workaround, but it does now work as expected. I had to filter the updates received by the PE from the primary CPE at each site to only accept the LAN range from that site, not the LAN range from other sites that it was learning via the backup CPE, via PE, via other site backup router. I think I was barking up the wrong tree re the downward bit. This issue is because there is indirect OSPF connectivity between all the CPE's connected to the same PE. Basically the PE needs to never pass on LSA's learnt from one CPE to another CPE then we would be all ok.
I still have an issue to solve for PPP xDSL services as they all share the one loopback as an ip unnumbered interface on the PE. The same distribute list approach wont work there.
Here is what I have done. There must be a less config intense and flexible approach to this.
router ospf 116 vrf RED
distribute-list prefix RED-acacia-ospf-subnets-inbound in GigabitEthernet1/0/1.3681
distribute-list prefix RED-acacia-ospf-subnets-inbound in GigabitEthernet1/0/1.3682
distribute-list prefix RED-geebung-ospf-subnets-inbound in GigabitEthernet1/0/1.3684
distribute-list prefix RED-kawana-ospf-subnets-inbound in GigabitEthernet1/0/1.3685
distribute-list prefix RED-goldcoast-ospf-subnets-inbound in GigabitEthernet1/0/1.3686
ip prefix-list RED-geebung-ospf-subnets-inbound permit 192.168.103.0/24
ip prefix-list RED-acacia-ospf-subnets-inbound permit 192.168.100.0/24
ip prefix-list RED-acacia-ospf-subnets-inbound permit 0.0.0.0/32
ip prefix-list RED-kawana-ospf-subnets-inbound permit 192.168.104.0/24
ip prefix-list RED-goldcoast-ospf-subnets-inbound permit 192.168.101.0/24 -
HL7 Unconsumed zombie ack messages suspended on MLLP R&R receive port from MLLP R&R send port.
I have a content message routing scenario with request/response mllp receive and send port . Below are the points which describes the situation :-
1) mllp message received from upstream application on receive port which sends back the direct synchronous ack .
2) Message is routed to send port which sends the message to the downstream app and receive the ack from the downstream app.
3) The ack received from downstream app is handled using a file type send port which dumps these acks to a folder.
Now the issue which is occurring intermittently, is that the ack message received from the downstream application get suspended on the receive port with the below error -
"The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended." Error code - 0xC0C01B4C.
This issue doesn't occur for all the messages. It seems the ack messages received by the send port, is searching the receive port instance which submitted the message to message box. But interestingly, not all the ack messages
are suspended.
If anybody have any idea about this behavior , kindly respond..I also need this question answering!
Comment from my host:
To prevent SPAM activity we have blocked the ability to send messages from our system where the FROM address is spoofed to anything other than the original sender's ID. The work around in your situation is to change the REPLY-TO address or switch to SMTP authentication. -
Urgent: Add a custom line in Hierarchical ALV.
Hi
I am using the FM 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' to display the header and item table details. However I would like to add a custom line below the item details of each section so that I can calculate the total (total of a particular field in the item table) and print it in this line....How do I do this....
Thanks..
VijayHi,
See the attached report which is used to display Hierarchial display for header and item;
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
zhu_to_link,
zpallettr,
vttk,
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel,
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor,
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route,
zzexproute LIKE likp-zzexproute,
zzroute2 LIKE likp-zzroute2,
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE,
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB
Maybe you are looking for
-
How to publish Windows Phone 8.1 Silverlight app to Windows Phone store?
I created Windows Phone 8.1 Silverlight app, and I can't to upload it into WP store. I want to use Create App Packages tool in Visual Studio 2013 Professional, but it's impossible for Silverlight apps. I read many guides on dev.windows.com. It's nece
-
Integration access manager and web services manager
Hi, Can the SSO token sent by the access manager be used by the SOA suite web services manager ? I would assume that this is a trivial configuration. Can anyone help with some ideas ? Thanks, Mohan
-
I am having difficulty connecting to Designer of the Dev Suite. I am prompted for a username, password and host string. I did not setup any of these during installation. My error codes are ORA 12560 : TNS:protocol adapter error. Cause: a generic prot
-
GPS info doesn't get to Aperture from Photo Stream
Took pics on iPhone 4s. They locate fine on the phone, but when they arrive at Aperture 3, and I move them to an existing project, the location info is gone.
-
UCS - East West Switching..Not Working I think
Hi all hope you can shed some light. I understood that the FI's switch east west traffic, Had an issue tonight where we removed Unplugged the north south portchannels to the layer3 network to upgrade the core and all VM's in the UCS lost connectivity