Row Selection in WebI

Hello,
I am able to select the values across a column,but not in a row. Can we highlight a row in WebI???
Thanks
NIvas

Hi,
For the sake of analysis you can create an alerter with the specified condition and highlight (format the background) the cell which satisfy the condition. You can enable the same alerter on all the columns of the block so that a particular row will get highlighted on satisfying a particular condition in the report.
Hope it helps you.
Regards,
Rohit

Similar Messages

Reset Row Selection from Web Item Analysis in WAD 7.0

Hi All,
I have a Web Item Type Analysis and I use the Row Selection (SELECT_ROWS) value multiple.
Is there a way to reset the selection via a function?
The user select some rows and start a planning function via a button. If they would like to start the function for an other selection they first have to remove the old ones and have to mark the other lines.
A function to remove all selection from the item is needed!
PS: It is getting funny if there is paging and the selection is not even visible because it is on an other page.
Thanks for help.

Hello All.
I have exaclty the same problem now.
Is there any way to do this?
Thanks a lot and best regards,
Alfonso.

Row selection in web layout

I am trying to use the layout 'line' selection functionality in order to execute a planning function for the selected row.
I have followed the process of creating a hidden variable that receives the line from the source layout, and have included this variable in the function. But the function does not execute for a selected row. It executes for all of the rows that have the same 'selected' characteristic value. What type of variable should I be using for the hidden variable? I have tried 'characteristic', replace type 'user-define'.
Does this work for the line selection in the web?

Hello <b><i>R</i></b>
Definitely you have more than one characteristic in the Layout in Lead Columns.
Extend the "hidden variable" concept for other characteristics in the lead column and use these variables in the Planning level "restriction". The variable types remains as "what you explained".
Your FOX would now get only the selected row as input data.
Good Luck!

Multiple Row Selection on Web Layout

I am aware that standard functionality only allows for single row or cell slection in a web layout.
Does anyone have a good workaround that they would suggest investigating?

Hi,
have a look at sample reports:
DEMO_DYNPRO_TABLE_CONTROL_1
DEMO_DYNPRO_TABLE_CONTROL_2
If you display the layout of dynpro 100 and display the attibutes of tablecontrol TABLE, you will see that the in attributes
(Line sel.) you have the radiobutton Multiple checked.
Best regards.

Using Row Selection in Analysis Web Item & Filter Command

In the 7.0 WAD (Web Application Designer), I have two analysis items that both have different data providers, DP_1 & DP_2. The two data providers are views from the same query.
In the properties of the first analysis item (DP_1), I'm using the Row Selection - 'Single with Commands', and I want to have a command that will filter on the value of the characteristic in the row selected and transfer that filter to the second analysis itme (DP_2). Is this possible?

yes, you can do this. There is XHTML code:
<bi:SET_SELECTION_STATE_BY_BINDING xmlns:bi="http://xml.sap.com/2005/01/bi/wad/bisp">
<bi:TARGET_DATA_PROVIDER_REF_LIST type="ORDEREDLIST">
// target data_provider:
    <bi:TARGET_DATA_PROVIDER_REF index="1" value="DP_2">
    </bi:TARGET_DATA_PROVIDER_REF>
</bi:TARGET_DATA_PROVIDER_REF_LIST>
<bi:SELECTION_BINDINGS type="UNORDEREDLIST">
    <bi:SELECTION_BINDING type="COMPOSITE" index="1">
// target infoobject
      <bi:CHARACTERISTIC value="0DOC_ITEM__0VENDOR" text="0DOC_ITEM__0VENDOR">
      </bi:CHARACTERISTIC>
// selection type
      <bi:SELECTION_BINDING_TYPE type="CHOICE" value="ITEM_CHARACTERISTIC">
        <bi:ITEM_CHARACTERISTIC type="COMPOSITE">
// source analysis table
          <bi:ITEM_REF value="ANALYSIS_ITEM_1">
          </bi:ITEM_REF>
// source infoobject
          <bi:CHARACTERISTIC value="0DOC_ITEM__0VENDOR" text="0DOC_ITEM__0VENDOR">
          </bi:CHARACTERISTIC>
        </bi:ITEM_CHARACTERISTIC>
      </bi:SELECTION_BINDING_TYPE>
    </bi:SELECTION_BINDING>
</bi:SELECTION_BINDINGS>
</bi:SET_SELECTION_STATE_BY_BINDING>
Or you can do this using command wizard! good luck!

Dynamic row selection based on Page member selection in Planning web-form

Hello experts
I have requirement where, user dont want 10 webforms to enter 2 accounts line for various sparse members. Below is the dimension detail and web-form current design
Account - Dense
Period - Dense
Year - Sparse
Scenario - Sparse
Version - Sparse
Entity - Sparse
Product - Sparse (600 level 0 members)
Product dim has family1 as parent and 40 level 0 mem like that there are 10 family level 1 members, now to enter account member (only 2 member) for 6 years projection ( it means 12 periods and 6 years in column ) , i can build 10 web-forms with one web-form has one family level-0 mem in rows,
however my question, is how can i achieve this in one web-form, instead of 10 web-forms for 400 products ?
your help is greatly appreciated.
Edited by: 859874 on Jul 18, 2012 8:58 PM

Im not sure there is any simple way to get dynamic row selection based on what is selected in the page.
If I were designing the form based on what you have stated, I would probably stick both Account and Year in the page, and the 400 products in rows. This would require the user to select the different combinations of Year / Account, but would mean only 12 columns (instead of 72).
Alternatively you could stick Account in rows too - meaning 800 rows, but less combinations to select in Page....all depends what is deemed acceptable to the user.
Probably other approaches that may be better than above (put Product in the Page for fun!!)
Thanks
JB

WAD 2004s Analysis Item Row Select RRI_RECEIVER does not pass Filter values

I have created an Analysis item and using a Data Provider that has a Sender-Reciever entry for it. I created a Command on the Row Selection Activation that does an Report to Report (RRI) jump to another web page(template or app whatever sap calls it). When running the page, it performs the jump to the other page, but does not filter the page on the selected hierarchy value on the original page.
Why does this not work?
If I do the same thing by selecting the Goto from the context menu on the cell it works fine.

Answering my own question here....
This was solved by applying the patch mentioned in Note 1115027.

How to make row selection by checkbox in ADF table

hello,
using jdev11g TP4 , fusion web application
when i drag my view object as ADF table into jsf page,
i want to know how to make row selection by checkbox
thanks
greenApple
Edited by: greenApple on Nov 10, 2008 11:33 AM

Hi,
the tree component has changed compared to 10.1.3. You no longer have a tableSelectmany component that renders as checkboxes. Instead you use the ctrl key and select the table rows
Frank

Is it possible to enable/disable table row selection?

I have a situation where a user can add rows to a "selection" table with a value that is used to perform a query to get a collection of objects associated with that value. Once those objects are available, a second "results" table will be populated with the row(s) returned. When the value is entered in the selection table, a web service call is made to perform the query and return the results. This may take a few moments and I am displaying an indeterminate progress indicator for the selection table row involved to indicate that the data is not yet available - the progress indicator is included as a column in the row; each row has its own indicator. Once the results are received the indicator is hidden to indicate the query for that row has completed. The user may enter as many rows in the selection table as they wish so there is a distinct possibility of multiple queries being executed at a given time. I have also attached a row selection listener to the selection table such that when a given row is selected, the results table will display the corresponding associated row(s).
What I'd like to be able to do is somehow temporarily disable the selection of any row that has a query in progress, while leaving other rows whose queries have completed be selectable. Once the query completes, the row can then become selectable, thus allowing for the results to be loaded and displayed in the results table. The way it works right now, if the row is selected while the query is still in progress, nothing is displayed (obviously), but then the row has to be re-selected after the query has completed to see the results. This is a viable (though undesirable) solution/workaround if there is at least one other row in the table. However, if the row is the only row in the table and has been selected, it cannot be re-selected (there's no other row to select to allow for re-selection). To boil it down, what I'd like to do is prevent the selection of the row until the query for that row is complete.
After perusing the JavaFX 2.2 API, I'm not seeing any obvious way to achieve this effect. If anyone has any solutions, suggestions, etc. on how this could be done I'd appreciate it greatly.

Here's an [url https://github.com/james-d/Conditionally-selectable-table]example. As predicted, keyboard navigation fails if the keyboard presses would result in an unselectable item being selected using the default selection model. The best workaround I can see for this is to register event filters for the appropriate keyboard strokes, as in the previously referenced thread.
Update: That code won't run in the current (ea b90) release of JavaFX 8.0, and probably a few recent releases; it will however run in the final release (and it runs in JDK 7). See [url https://javafx-jira.kenai.com/browse/RT-30593]RT-30593
Edited by: James_D on May 22, 2013 7:51 PM

Change current row selected Color in ADF rich client table

Hi All ..
i want to change the current row selected from the default ADF color to Another color.
i am not very good in javaScript .
any one can help me
Edited by: user9519817 on Aug 30, 2008 3:57 AM

User,
You don't need Javascript to do this. Have a read of section 18 of the Oracle Web user Interface Developer's Guide for Oracle Application Development Framework (found [url http://download.oracle.com/otn_hosted_doc/jdeveloper/11/doc/b31973.pdf]here for information about creating a custom skin. Unfortunately, the documentation for the selectors to use, which should be in a JDev help topic titled, ""Selectors for Skinning Fusion's ADF Faces Components" doesn't exist yet :( However, you can check [url http://www.oracle.com/technology/products/adf/adffaces/11/doc/skin-selectors.html#]here for that information.
Selectors that may be of interest:
.AFTableCellDataSelectedColor:alias
.AFTableCellDataSelectedBandedColor:alias
.AFTableCellDataSelectedInactiveColor:alias
.AFTableCellDataSelectedBandedInactiveColor:alias
Best,
John

WAD Analysis Row Selection value by JS

Hi Experts,
I created in Web Application designer (7.10 P2) an Analysis Item with row selection single.
What I want is to catch (via JavaScript or others?) the selected row (rowid?) and the values of the fields of the selected row to jump to an other Query using this values as Filter/Variables.
Any ideas welcome
Bernd

Hi Bernd,
you can use the Report-Report interface to jump to a new target:
http://help.sap.com/saphelp_nw70/helpdata/en/42/d43307f3ef6bb4e10000000a1553f6/frameset.htm
Once the assignment is made with TA RSBBS, you can select one line in your analysis item,
right-click, select 'Goto' and jump to the target. The selection made is transfered to the target according to
the settings in RSBBS.
Best regards,
Alexander Bauer

Multiple row select for table not working..

Hi Experts,
I have a table in ABAP Web Dynpro where I have enabled the multiple row select functionality. I can select all and deselect all. I can also select a block of adjacent rows of table by choosing first and last by pressing Shift key.
But I am not able to select multiple individual records for that table.
I tried the same thing in different system and it works fine there.
Please let me know if we are missing some standard plugin or we need to enable this in some settings.
System where the issue is:
SAP_APPL: release 600, level 18
SAP_BASIS: Release 700, level 22
System where it is working fine:
SAP_APPL: release 604, level 8
SAP_BASIS: release 701, level 8
Regards,
Anand Kolte

Hi
Press CTRL key and Select records, you can select multiple records, continuously or randomly your desired selection.
Cheers,
Kris.

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

Not able to select and copy from adf table in IE and chrome if we enable row selection

Hi All,
We have an adf table and user wants to select and copy table cell values.
We enabled row selection on adf table. Ifrow selection is in place, IE and Chrome are not allowing user to select and copy data. But Firefox is allowing.
Do we have any solution to this? For our customer IE is the standard browser and they do test app on IE.
Regards
PavanKumar

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Row Selection in WebI

Similar Messages

Maybe you are looking for