RPE-01003: An infrastructure condition prevented the request from completin

Hi,
I am using OWB 10g R2 with Oracle DB 10g R2 in Linux server.
When I execute a mapping it gives the following error at sometimes and completes successfully sometimes or it hangs and shows running status most of the time.
Error: Io exception: the network adapter could not establish the connection
I have checked for any network errors in the server and the server is clean.
Can this error occur due to network issues or do I have to change any parameters.
Can anyone help me with resolving this error?
Thanks in advance!
Arul
Message was edited by:
user528846

OWB execution error : ORA-20213: Unable to create standalone job record
RPE-01008 and RPE-01009 when executing flatfile mappings
for ora-29516 check out
http://www.orafaq.com/maillist/oracle-l/2000/10/14/0827.htm
If this problem occurs only with Oracle Database 10g Release 10.2.0.1.0 - 64bit, I find it rather pointless to go after it. I would be cautious to use or support a tool which throws assertion errors in my face. I am really sorry to say this, but for the moment I see no other alternatives for you than either to downgrade to Oracle 10gR1 or (if you absolutely need Oracle 10gR2) to migrate to a 32-bit environement.
If you have 64x-bit Solaris systems, you can eventually try JChem Cartridge with Oracle 10gR2 64-bit for Solaris -- as far as I know nobody has tested this combination yet. You may have luck with Solaris, but my gut feeling is that the Aurora assertion failure will occur on that platform too.
also , It appears that the problem can be avoided by installing Oracle Database 10g Products from the Oracle Database Companion CD.

Similar Messages

Upg 10gr2 to 11gr2, process flow: RPE-01003: An infrastructure condition...

Hello.
I am in a bit of a pickle right now after upgrading OWB from 10.2.0.4 to 11.2.0.3, and I'm here requesting a sanity check. Due to the need of a database upgrade, OWB also has to be upgraded and the data warehouse that has been functional and stable for a long time on 10g needs to be migrated to 11g. So this is main deal:
I just want to migrate all mappings and workflows and run them as before. I do not want to redeploy as that will force an enormous effort to regression test everything.
So the OWB upgrade went seemingly well. Everything runs as before. The problem started when I tested deployment of a mapping and subsequently
1. Deployment of a mapping goes well.
2. Deployment of the process flow goes well.
3. Deployment of a mapping that is run in a process flow however causes problems when the process flow is executed.
The deployment goes well. However the mapping fails when I run the process flow with the following error:
RPE-01003: An infrastructure condition prevented the request from completing: no rows found for select into statement.
I subsequently sync the mapping in the process flow redeploy the process flow. Now ALL the other mappings in the process flow that have not been redeployed since the upgrade fails with the same error. However the one that failed before is executed correctly. If I redeploy all the other mappings (which can be dozens) it works, but now I'm faced with a serious regression testing period.
Personally I have a couple of theories that I hope you can debunk or possibly verify.
1. It might be location oriented. I say that because my locations are a bit... iffy. When I redeploy some mappings in some locations it always insists on redeploying the connector (regardless if I deploy it stand-alone right before), and my location passwords are never "remembered" between sessions.
2. I do not have specific knowledge about how workflows are generated in the repository, but if it's run by ID, maybe a new ID is generated for the mapping when it is redeployed, and subsequently the process flow gets a new ID when it gets redeployed?
I hope someone has seen this before and can get me on the right track. Thanks very much.

Here is a log that also illustrates the problem.
First workflow which does not have a redeployed workflow goes okay. That is WF_BOOKED_PRODUCT_020:MAP_BOOKED_PRODUCT_020.
The second workflow, WF_BOOKED_PRODUCT_030:MAP_BOOKED_PRODUCT_030, that is the one that has the redeployed mapping fails.
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358142 parentAuditId= 4358137 topLevelAuditId=4358137 taskName=MAPPER_T_MAIN:WF_BOOKED_PRODUCT_020
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2013/05/10-09:23:10-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Thin driver connection time - 75 millisecond(s)
2013/05/10-09:23:10-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Workflow equivalent DB Java Encoding = ISO-8859-1
2013/05/10-09:23:10-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:10-CEST [41D041D][] AuditId=4358147: Processing execute request
2013/05/10-09:23:10-CEST [41D041D][] Free Memory(bytes)=5547904 Total Memory(bytes)=12557312 Used Memory(bytes)=7009408 Used Memory(percent)=56%
2013/05/10-09:23:10-CEST [15261526][] Thin driver connection time - 75 millisecond(s)
2013/05/10-09:23:10-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358147 parentAuditId= 4358142 topLevelAuditId=4358137 taskName=WF_BOOKED_PRODUCT_020:MAP_BOOKED_PRODUCT_020
2013/05/10-09:23:10-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] OCI driver connection time - 236 millisecond(s)
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] PLSQL callspec: declare "$MAP_ENV$" owbsys.wb_rt_mapaudit.wb_rt_name_values;begin "$MAP_ENV$"(1).param_name := 'OBJECT_ID';"$MAP_ENV$"(1).param_value := 206448;"$MAP_ENV$"(2).param_name := 'AUDIT_ID';"$MAP_ENV$"(2).param_value := 4358147;"$MAP_ENV$"(3).param_name := 'OPERATING_MODE';"$MAP_ENV$"(3).param_value := '0';"$MAP_ENV$"(4).param_name := 'PURGE_GROUP';"$MAP_ENV$"(4).param_value := 'WB';"$MAP_ENV$"(5).param_name := 'MAX_NO_OF_ERRORS';"$MAP_ENV$"(5).param_value := '50';"$MAP_ENV$"(6).param_name := 'COMMIT_FREQUENCY';"$MAP_ENV$"(6).param_value := '1000';"$MAP_ENV$"(7).param_name := 'AUDIT_LEVEL';"$MAP_ENV$"(7).param_value := '2';"$MAP_ENV$"(8).param_name := 'BULK_SIZE';"$MAP_ENV$"(8).param_value := '1000';"$MAP_ENV$"(9).param_name := 'CHUNK_PARALLEL_LEVEL';"$MAP_ENV$"(9).param_value := '0';"$MAP_ENV$"(10).param_name := 'CHUNK_EXECUTE_RESUME_TASK';"$MAP_ENV$"(10).param_value := 'false';"$MAP_ENV$"(11).param_name := 'CHUNK_FORCE_RESUME';"$MAP_ENV$"(11).param_value := 'false';"$MAP_ENV$"(12).param_name := 'CHUNKNUM_TIMES_TO_RETRY';"$MAP_ENV$"(12).param_value := '2'; ? := "STG_MAPPER"."MAP_BOOKED_PRODUCT_020"."MAIN"(p_env=>"$MAP_ENV$");end;
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] PLSQL Mapping completed auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Started Get Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Return Result=0 auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Has Custom Parameters=false auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Completed Get Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Started Report Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] report_execution_result auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Completed Report Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [41D041D][] Free Memory(bytes)=2954368 Total Memory(bytes)=12557312 Used Memory(bytes)=9602944 Used Memory(percent)=77%
2013/05/10-09:23:12-CEST [41D041D][] AuditId=4358147: Request completed
2013/05/10-09:23:12-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] report_execution_result auditId=4358142
2013/05/10-09:23:12-CEST [41D041D][] Free Memory(bytes)=2225600 Total Memory(bytes)=12557312 Used Memory(bytes)=10331712 Used Memory(percent)=83%
2013/05/10-09:23:12-CEST [41D041D][] AuditId=4358142: Request completed
2013/05/10-09:23:13-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:13-CEST [41D041D][] AuditId=4358159: Processing execute request
2013/05/10-09:23:13-CEST [41D041D][] Free Memory(bytes)=6296536 Total Memory(bytes)=12557312 Used Memory(bytes)=6260776 Used Memory(percent)=50%
2013/05/10-09:23:13-CEST [88E088E][] Thin driver connection time - 81 millisecond(s)
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358159 parentAuditId= 4358137 topLevelAuditId=4358137 taskName=MAPPER_T_MAIN:WF_BOOKED_PRODUCT_030
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Thin driver connection time - 74 millisecond(s)
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Workflow equivalent DB Java Encoding = ISO-8859-1
2013/05/10-09:23:14-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:14-CEST [41D041D][] AuditId=4358164: Processing execute request
2013/05/10-09:23:14-CEST [41D041D][] Free Memory(bytes)=5425128 Total Memory(bytes)=12557312 Used Memory(bytes)=7132184 Used Memory(percent)=57%
2013/05/10-09:23:14-CEST [6F866F86][] Thin driver connection time - 79 millisecond(s)
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358164 parentAuditId= 4358159 topLevelAuditId=4358137 taskName=WF_BOOKED_PRODUCT_030:MAP_BOOKED_PRODUCT_030
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:476)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
Caused by: java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     ... 6 more
java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:476)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
Caused by: java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     ... 6 more
java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
2013/05/10-09:23:14-CEST [41D041D][] Free Memory(bytes)=3686600 Total Memory(bytes)=12557312 Used Memory(bytes)=8870712 Used Memory(percent)=71%
2013/05/10-09:23:14-CEST [41D041D][] AuditId=4358164: Request completed
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement

Inequality condition prevents the optimizer from selecting indices on tabl

Dear all,
I have the below query which takes 4 minutes to give the output:
original query
select t_sub.contrno "contNo" from tsk_subno t_sub ,arm_subs_balance bal where order_no = '5360' and
order_type='NET' and t_sub.subno = bal.subno (+);sql tuning advisor is giving the below advise.. Restructure SQL
Predicate NVL("IVM_BILLING"."BILLED",'N')<>'Y' used at line ID 14 of the execution plan is an inequality condition on indexed column "SYS_NC00071$". This inequality condition prevents the optimizer from selecting indices on table "TABS"."IVM_BILLING".How I can restructure the sql..
FYI. arm_subs_balance is a view which takes data from IVM_BILLING.
view script :
CREATE OR REPLACE VIEW ARM_SUBS_BALANCE
(CONTRNO, SUBNO, PAST_DUE, DEPOSIT, UNBILLED,
TOTAL)
AS
SELECT contrno,subno,sum(past_due) past_due,sum(deposit) deposit,
       sum(unbilled) unbilled,
       sum(past_due+deposit+unbilled) total
from
select subno,0 past_due,0 deposit,0 unbilled,contrno
from CRM_USER_INFO
union all
select nvl(H.subno,'0000000') subno, sum(nvl(R.ar_am_loc,0)) past_due,
       0 deposit,0 unbilled, R.contrno
from     IVM_INVOICE_DETAIL R, IVM_INVOICE_RECORD H
WHERE R.AR_REF=H.AR_REF
   and R.contrno = H.contrno
group by nvl(H.subno,'0000000'),R.contrno
having sum(nvl(R.ar_am_loc,0)) != 0
union all
select subno,0 past_due,nvl(add_deposit,0) depoist,
       0 unbilled, contrno
from CRM_USER_EQUIPMENTS
union all
select subno,0 past_due,0 deposit, nvl(billamount,0) unbilled,
       contrno
from IVM_BILLING
where nvl(billed,'N') != 'Y'
group by subno,contrnoThanks
Kai
Edited by: KaiS on Sep 30, 2009 10:10 AM

Justin,
I always thought that nvl(billed,'N') != 'Y' meant that the query should include all rows with a null-value or a value other than Y. :p
But I agree that the index would moste likely not be that helpfull, but we need more information for that: [When your query takes too long|http://forums.oracle.com/forums/thread.jspa?messageID=1812597] and [HOW TO: Post a SQL statement tuning request |http://forums.oracle.com/forums/thread.jspa?threadID=863295]
I expect that the conditions on tsk_subno will result in a small number of rows and that there's an index on tsk_subno.order_no which will be used to retrieve those rows.
In that case view arm_subs_balance will be accessed on subno. This means that if the tables crm_user_info, crm_user_equipments and ivm_billing have indexes on subno, those indexes will be used, but an index on ivm_invoice_record.subno will not be used because of select nvl(H.subno,'0000000') subnoWithout more information I would guess that this part of the union takes longest and should be tuned by rethinking/redesigning the view or a function based index: create index i on IVM_INVOICE_RECORD ( nvl(H.subno,'0000000') );

I lost my iphone and I use the locate iphone function to wipe to protect my information, but I cannot get the location to restore my iphone, can I request a permanent lock to prevent the thief from using it?

I lost my iphone and I use the locate iphone function to wipe to protect my information, but I cannot get the location to restore my iphone, can I request a permanent lock to prevent the thief from using it?, I call your call centre, your staff said they can do nothing, I am great disappointed as your advertisment said that we can protect our phone from lost, however, I think my phone has now been resale and reuse by others, but Apple cannot do anything with your so call "Find my iphone" function, I have brought 4 iphone and iPad for my family use, I will never use your product again and recommend to my company or friends anymore!
Philip Sin

You are not addressing Apple here at all.
Apple can do nothing. Sorry.
Like any other make of any other phone, they cannot permanently disable it.
The thief is responsible. Not Apple. You seem to be directing your anger at the wrong people.
No phone manufacturer will do this.
"I am great disappointed as your advertisment said that we can protect our phone from lost, "
It mentions "loss" NOT theft. you cannot find a mention of theft protection. Find my iphone is NOT theft protection and has never been advertised as such.

Preventing the User from going back to the main page after logging out.

Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.

Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
     public void destroy() {
     public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
               ServletException {
          System.out.println("filter");
          HttpServletRequest request = (HttpServletRequest) arg0;
          if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
               System.out.println("redirecting ... ");
               RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
               d.forward(arg0, arg1);
          arg2.doFilter(arg0, arg1);
     public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
          <filter-name>test</filter-name>
          <filter-class>test.Test</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>test</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>

Can we prevent the user from saving the document?

Hi All,
I want to know that can we prevent the user from saving an illustrator doc till a condition match.
if we can, then how?
Please comment.
Thanks

You can't prevent it, no. You could continually set the document modified flag to false, which would prevent regular 'Save', but they could always do 'Save As' -- nothing can stop that.

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

@How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

This sounds like you are using Photoshop Elements, and the Photoshop Elements forum would be best at answering that.
Photoshop Elements
Gene

502 error in sending the request from F5 to SAP PORTAL

Hi All,
I face a problem in NW04S SP13 Level:
I have my Production and Development landscape where I get an HTTP Request from a Oblix Server and pass it to SAP ENTERPRISE PORTAL through F5.
In my Development Landsacpe this request is process by SAP PORTAL
but in my Production landscape it Intermittently fails.
The Only difference between my Production and Development landscape is I have multiple portal instances in my Production where as I have a single instance in my Dev.
When in my Dev landscape I login to portal and Open a ESS - Benefits application it works fine but in the Production Landscape it throws 502 ERROR.
I tried Routing the HTTP Request from my Dev Environment's F5 to Production Environments Portal, and even then it throws error Intermittently.
But If I Pass the request from my Production Environment's F5 to Development Environments Portal it works perfectly fine.
What might be the issue?
Any Idea? Your help is really appreciated.
Thanks & Regards,
sirisha.RS

Hi Rk,
I am not sure about it. Will talk to the Admin and get back to you.
Thanks & Regards,
Sirisha.RS

Change the status of the request from Released to un released.

Dear all
Some requests were created with no target system and were released.
these requests are to be transported to our Production System.
Is there any other way to transport these requests?
things I tried.
1. I tried to find the files in Cofile and datafile but could not find in trans folder.
2. tried to add the objects to new requests but facing problem while adding the key to the request.
Regards
Mahesh

Hi,
you have created the requests as local requests, it means you haven't mentioned Target system it will be treated as local requests so it wont create Cofiles and Datafiles.
and you can use the option Transport of copies and check. actually u can't change the request from the Rleased to Unreleased.
you have to create new request that's the only way if your not able to copy the objects to the new request or if the transport of copies wont work.
-Srinivas.korva

Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. Help

Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times These are my warnings
"Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services." [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

Is there a way to prevent the display from waking up?

is there a way to prevent the display from waking up when using the (play, next, volume up/down, etc.) keys for itunes?

How to stop the searching on dashboard when one opens the dashboard...
If you search, there are more threads on this topic in this forum.

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

I don't want to have to click the allow button every 3 seconds uploading video, how do I disable the "firefox prevented the page from reloading" when I've already put the site on my exceptions list?

I begin uploading video to Facebook and a small window opens to show the progress bar but, the video stops uploading about every 5% when a notification comes from the top bar stating: "Firefox prevented the page from reloading" with an Allow button on the right. Regardless of clicking the allow button and putting Facebook in every exception list Firefox options seems to have or even turning pop up blockers off, that dam button keeps coming! How do I prevent or disable this?
I am running windows XP media center edition SP2, and have Firefox v3.6.11

You're welcome

RPE-01003: An infrastructure condition prevented the request from completin

Similar Messages

Maybe you are looking for