RPTQTA00 deamnds for 0008 authorization

Hi,
There is report called RPTQTA00 which generate sick leave quota for employee.
But at the time of execution its demands IT0008 authorization.
Here the situation is like this:
We donu2019t want to give IT0008 to our leave user since its store basic salary which our policy doesnu2019t allow us, but we want our leave user should execute this report.
please suggest us how to execute this report without hitting IT0008.

You can look for references on AUTHORIZATION OBJECT P_ABAP. This object allows you to skip authorizations for a particular report.

Similar Messages

  • TS1389 iTunes asks for computer authorization, I tried all the steps in this article and it still will not play the song purchased. What else can be done. I have a MacBook Pro with Lion OS

    The itunes software repeats its request for computer authorization despite trying the steps mentioned in the
    help article: authorizing from admin account, checking for updates, deleting sc folder, what else can be done?

    Doublechecking. In the course of your troubleshooting to date, have you also worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • Can we give more than one value for an Authorization field in Auth-Check.

    Hi all,
    Can we give more than one value for an Authorization field in Auth-Check.
    Ex: AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
    ID 'ACTVT' FIELD '02'
    ID 'CUSTTYPE' FIELD <Value 1> <Value 2> <Value 3>.
    IF SY-SUBRC 0.
    MESSAGE E...
    ENDIF.
    If yes, please help me with exact syntax.
    Think it will be like
    ID 'CUSTTYPE' FIELD: <Value 1>, <Value 2>, <Value 3>.

    Hi,
    yes we can give more than one field.
    program an AUTHORITY-CHECK.
    AUTHORITY-CHECK OBJECT <authorization object> 
       ID <authority field 1> FIELD <field value 1>. 
       ID <authority field 2> FIELD <field value 2>. 
       ID <authority-field n> FIELD <field value n>. 
    The OBJECT parameter specifies the authorization object.
    The ID parameter specifies an authorization field (in the authorization object).
    The FIELD parameter specifies a value for the authorization field.
    The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
    please reward points, if it is useful.
    satish.

  • Automated script for setting authorization limit in GL

    Hi,
    I am trying to create an automated script in our General Ledger application to set authorization limit. I have looked into code of form GLXSTEAL.fmb. There I found that, GL_AUTHORIZATION_LIMITS_PKG is being used for setting authorizations limit.
    Below is the code I am trying to run from PL/SQL developer using apps id:
    declare
    l_Rowid varchar2(30);
    l_Set_Of_Books_Id apps.GL_AUTHORIZATION_LIMITS.SET_OF_BOOKS_ID%TYPE;
    l_Employee_Id apps.GL_HR_EMPLOYEES_CURRENT_V.EMPLOYEE_ID%TYPE;
    l_Authorization_Limit apps.GL_AUTHORIZATION_LIMITS.AUTHORIZATION_LIMIT%TYPE;
    l_user_id number := FND_GLOBAL.USER_ID;
    l_login number :=FND_GLOBAL.login_id;
    p_Attribute1 apps.GL_AUTHORIZATION_LIMITS.Attribute1%TYPE;
    p_Attribute2 apps.GL_AUTHORIZATION_LIMITS.Attribute2%TYPE;
    p_Attribute3 apps.GL_AUTHORIZATION_LIMITS.Attribute3%TYPE;
    p_Attribute4 apps.GL_AUTHORIZATION_LIMITS.Attribute4%TYPE;
    p_Attribute5 apps.GL_AUTHORIZATION_LIMITS.Attribute5%TYPE;
    p_Attribute6 apps.GL_AUTHORIZATION_LIMITS.Attribute6%TYPE;
    p_Attribute7 apps.GL_AUTHORIZATION_LIMITS.Attribute7%TYPE;
    p_Attribute8 apps.GL_AUTHORIZATION_LIMITS.Attribute8%TYPE;
    p_Attribute9 apps.GL_AUTHORIZATION_LIMITS.Attribute9%TYPE;
    p_Attribute10 apps.GL_AUTHORIZATION_LIMITS.Attribute10%TYPE;
    p_Attribute11 apps.GL_AUTHORIZATION_LIMITS.Attribute11%TYPE;
    p_Attribute12 apps.GL_AUTHORIZATION_LIMITS.Attribute12%TYPE;
    p_Attribute13 apps.GL_AUTHORIZATION_LIMITS.Attribute13%TYPE;
    p_Attribute14 apps.GL_AUTHORIZATION_LIMITS.Attribute14%TYPE;
    p_Attribute15 apps.GL_AUTHORIZATION_LIMITS.Attribute15%TYPE;
    p_Context apps.GL_AUTHORIZATION_LIMITS.context%TYPE;
    l_date date :=sysdate;
    begin
    GL_AUTHORIZATION_LIMITS_PKG.Insert_Row(
    p_Rowid => l_Rowid,
    p_Set_Of_Books_Id => 1001,
    p_Employee_Id => 9236,
    p_Authorization_Limit => 100,
    p_Last_Update_Date => l_date,
    p_Last_Updated_By => l_user_id,
    p_Creation_Date => l_date,
    p_Created_By => l_user_id,
    p_Last_Update_Login => l_login,
    p_Attribute1 => p_Attribute1,
    p_Attribute2 => p_Attribute2,
    p_Attribute3 => p_Attribute3,
    p_Attribute4 => p_Attribute4,
    p_Attribute5 => p_Attribute5,
    p_Attribute6 => p_Attribute6,
    p_Attribute7 => p_Attribute7,
    p_Attribute8 => p_Attribute8,
    p_Attribute9 => p_Attribute9,
    p_Attribute10 => p_Attribute10,
    p_Attribute11 => p_Attribute11,
    p_Attribute12 => p_Attribute12,
    p_Attribute13 => p_Attribute13,
    p_Attribute14 => p_Attribute14,
    p_Attribute15 => p_Attribute15,
    p_Context => p_Context );
    commit;
    end;
    I am getting the error PLS-00306: wrong number or types of arguments in call to 'INSERT_ROW'.
    Please help me with this.
    Thanks

    I have found another way to achieve this. By inserting the data directly to GL_AUTHORIZATION_LIMITS table.
    INSERT INTO gl.GL_AUTHORIZATION_LIMITS
    (set_of_books_id,employee_id,authorization_limit,CREATION_DATE,CREATED_BY,LAST_UPDATE_DATE,LAST_UPDATED_BY,LAST_UPDATE_LOGIN)
    VALUES (1001,p_person_id,1.00,SYSDATE,l_user_id,SYSDATE,l_user_id,l_login);

  • HT204074 Is "Deauthorize All" my only option for Computer Authorizations?

    According to the support pages I have read, I should be able to "Manage Devices" on the Account Information page. But I only have "Deauthorize All" as an option. I'm I missing something? I'm I not looking in the right place? Is "Deauthorize All" my only option for Computer Authorizations?

    I have two lines, one on AT&T and one on Verizon.
    On AT&T, 450 minutes, 200SMS (200SMS is no longer offered) and unlimited data for $80.40 after taxes.
    On Verizon, I have 450 minutes, 1000SMS and 2GB Data for $86.
    There are pay as you go retailers out there such as Cricket but you will pay full price for the phone but less per month to use it.

  • BBP_PS_PROJECT_GET_LIST: Checks for Change Authorization.

    Hi,
    I have a custom SAP program that is required to fetch pertinent details from a project.
    The SAP function module BBP_PS_PROJECT_GET_LIST retrieves several internal tables is used for this purpose. 
    For some reason this function module, which looks like it should only retrieve information and cannot perform changes itself, checks for Change authorization to object C_AFKO_ACT.  As a result, users with Change access to projects can run this and get the appropriate results (in internal table IT_AFVC).  However, users with Display access only to projects do not have any data returned back in this same structure.
    Any idea on how to go about this problem?
    Regards
    Jibat

    Hi,
    See also the foll related  notes before you implement the corrections in the note 818342 based on your current SP level for SRM 4.0.
    Note 742314 - BADI for approver selection when adding/changing approvers
    Note 802581 - Error in call "BBP_WFLH_AGENTS_FOR_CHANGE_GET"
    BR,
    Disha.
    Do reward points for  useful answers.

  • I can't upgrade. my system calls for an authorization code and I do not know it

    I purchased a used computer, when I try to upgrade it asks for a authorization code. I am clueless. I have tried numerous useless codes. Do you have a suggestion as to getting around this?

    Hi Eau
    Thanks for your reply. I have thought about bypassing App store and installing the new package. However it shows like this:
    Feeling as though I have pretty bad luck recently...

  • Pre requisites for Structural Authorizations

    Guys,
    Can some one tell me what are the Pre requisites that I need to follow before implementing Structural Authorizations? Please share your thoughts.
    Thanks,
    Kumar

    Thanks Sikindar,
    This document is for BW 3.x and we are implementing Struct Auth in BI 7.0, infact I have the same document as well. I am trying to see whether anything has changed in configuration point of view from BW 3.x to BI 7 for Structural Authorizations.
    Thanks,
    Kumar

  • Mass-Update Default Print Properties for Spool Authorization (S_SPO_ACT)

    Dear Experts
    To protect HR spool requests it is possible to use the print-authorization in combination with the authorization object S_SPO_ACT.
    In case a HR user prints a form the the print-popup will default the user-parameter SAU for print-authorization. When printed like this the value of the SAU-parameter will be added to the spool request.
    In case the HR user prints a ABAP-list the value of the user-parameter SAU is not defaulted in the print popup. Instead seperatly saved defaults print properties (see print popup -> properties) are taken.
    How can I mass-change these default print properties? How can I set these default print properties for other users?
    Thanks in advance

    Please note that with SAP BASIS release later than 620, parameter id 'SAU' is either no longer used or only used in a limit fashion. The default spool authorization is now stored in cluster 'UV' instead of at 'USR05' / parid 'SAU' .
    If your users already have 'SAU' parameter populated with proper spool authorization, SAP has an ABAP util 'RSTRANSPARAMSAU' to store this in the cluster. Once you run this util, default spool authorization will
    be populated properly each time spool files are created.

  • Regeneration of INDX for Structural Authorization

    Hello all,
    We are having problems with the index of structural authorization.... employees can´t see objects created until we run the program RHBAUS00.
    I'm reading at the documentation of program RHBAUS00, and it says that "The index for the structural authorization profile of the user is generally regenerated during the night in a batch job".....  but it is not working !
    Does any body know how SAP execute an automated regeneration of index for structural authorization?
    I want to know which job do that or how the system do that? or if I need to define a job by my self?
    Thanks in adcanve.
    Enrique Vera

    Hi Enrique,
    I think you have misanderstood the documentation.What it says is that usually customers run this program RHBAUS00 as batch every night. But apart from the report there is no other program/functionality that will reset the INDEX
    You have to set up this report to run as BDC everynight if you require it.
    Hope this help
    Sarah

  • How to config CDM for user Authorization

    Hi Sir,
    Can you tell me how to config CDM 4630 for user authorization with different privilege by using radius server
    Regards

    Here is a link on configuring user authentication on acns.
    http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008008123f.html
    Not sure if there is one available for authorization too.

  • HT1918 if apple charges $1 for the authorization hold on my credit card? why do i need to pay this in my bank? ;

    if apple charges $1 for the authorization hold on my credit card? why do i need to pay this in my bank?

    http://support.apple.com/kb/HT3702.

  • I am going through a divorce and she has the computer. I'm trying to tranfer my music to a new computer but for about 100 songs its asking for her authorization password that I dont have. How can I get these songs transfered or can I?

    I am going through a divorce and she has the computer. I'm trying to tranfer my music to a new computer but for about 100 songs its asking for her authorization password that I dont have. How can I get these songs transfered or can I?

    It sounds like two Apple accounts were used in the purchase of songs, yours and hers.  Assuming she won't give you her password, you're kinda stuck.  For $129 or so you can repurchase them all.
    By the way, if she has the computer and it has your account info in it, you ought to change your password.

  • No "list-name" option availbale for aaa authorization command.

    I have a 1721 router running 122-15.T14 and want to implement authorization but the router does not provide command option for list name.
    I want to implement the following command:
    "aaa authorization network groupauthor group radius"
    but the only option is default after "network".
    Router#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C1700 Software (C1700-K9SY7-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Fri 27-Aug-04 23:26 by cmong
    Image text-base: 0x80008120, data-base: 0x80F731A0
    ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
    ROM: C1700 Software (C1700-K9SY7-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)
    Router uptime is 5 minutes
    System returned to ROM by reload
    System image file is "flash:c1700-k9sy7-mz.122-15.T14.bin"
    cisco 1721 (MPC860P) processor (revision 0x400) with 56844K/8692K bytes of memory.
    Processor board ID FOC08302CF6 (610086355), with hardware revision 0000
    MPC860P processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    2 Serial(sync/async) network interface(s)
    32K bytes of non-volatile configuration memory.
    32768K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102
    Router(config)#aaa authorization network ?
    default The default authorization list.
    Router(config)#aaa authorization network

    I think that your issue is version related. I have a customer who is running a bunch of 1721 routers and when I do aaa authorization network ?
    I get both default and the option to name a list.
    I checked with the Software Advisor on CCO and it looks to me like the named-list feature was added in 12.3. As long as you are running 12.2 I do not think you will have the option for a named-list for network authorization.
    HTH
    Rick

  • Syntax for  Proxy-Authorization" which enables domain and realm

    How to set Proxy-Authorization header for Domain and realm setting for Proxy authenication via URLConnection Class?.
    Please provide me syntax for "Proxy-Authorization" which enables domain and realm setting with basic authentication.

    Hi, I am also facing same problem
    Software : Weblogic jdk1.3.1
    If anyone know the solution ,Please help me
    Thanks,
    Suneel

Maybe you are looking for

  • Display a Calendar View in the Portale Server

    Hi, we use portal server 6.2 and we want to display a view of the calendar inside a channel of the portal. We know that portal have a calendar provider but we really didn't understand how can we use this provider to call a custom view of the calendar

  • Help with project...

    I have aproject to do in my cs class. I seriously do not know what to do here: "For this project you will write a program that will aid in the cracking of a substitution cipher. Basically, it is a form of frequency analysis. Your program will read in

  • Any way to get stats on a project? (e.g. how many cuts)

    I have completed a a project which runs at 01:42:00 - a documnetary - and purely out of interest I wondered if there was any way to get any stats for it, such as how many files actually used (from hundreds of hours of footage), how many edit points e

  • How to create an EXCEL file in Presentation server

    hello experts, please suggest  me a solution for the following problem : I have an internal table with some data. how can i create an excel file with that data in Presentation Server. Thanks & Regards sasi.

  • Guest Portal Access using ISE

    I'm having an issue setting up the Guest Port Access for our wireless network. I'm trying to setup an SSID anchored in the DMZ for internet access only. The authentication to this would be granted via the ISE Guest Access Portal. I've got the SSID cr