RRI from BI to ECC on SAP Portal

We have a custom report in ECC and we would like to call that report from a BI report (Jump) while passing some values. How do I approach on this.
1) Do I need Sap WebGUI.
2) If not what are the steps I need to take on the ECC side?
3) On the BI how do I pass the values via URL?
Is there any thing I need to consider for Portal other than generating iViews.
This is a SSO enviornment.
Thanks

Best option is to use WebGUI on the R/3 side.
This will take of passing parameters to the r/3 tcode.
Another option is to create a VC model or BSP app on the R./3 side and create the jump targer and in RSBBS set the parameters which needs to be passed via URL./

Similar Messages

Adobe Form called from SAP Portal, not executing interface global init code

Hello!
I have an adobe form called from both R/3 and SAP Portal and I need to show long text dinamically calculated.
The deal is at the SAP Portal execution, as scenario characteristics don't allow string definitions, I'm using 255 characters tables (QISR_TAB_TYPE), that I'm trying to convert inside form interface (Global init code).
The problem is that the interface global init code is being executed when the form is called from R/3, but it is not at SAP Portal.
Does anybody know how to manage this? It's kind of a problem that the BAdi method int_service_request_init doesn't allow types over 255 characters... and if it is not possible to access the form interface code section (maybe there's any way)... i need to find some code section where i can convert tables before the form context is filled!!
Thanks a lot!!
Regards,
Diana.

Hi,
have you searched on SCN? There are some threads with same problem such as [this one|/message/9270216#9270216 [original link is broken];. There is more threads. They may help you to solve your issue.
Cheers

Can't See com.sap.portal.runtime.logon in list of PAR Files in Iview Wizard

Hello All,
I am trying to create an iview from PAR file com.sap.portal.runtime.logon which is the logon par file that has the logon page. But when I right click a folder in the PCD and click on New From PAR Iview I try to find on the list of available par files and I don't find the one named com.sap.portal.runtime.logon
Can anyone tell me if this has to do with the portalapp.xml file from com.sap.porta.runtime.logon.par file.? or with the Security Zones defined in portalapp.xml? Or does someone know why this PAR file doesn't appear on the list and how can I make it appear on this list of par files?
Any helpful ideas to solve this issue will give rewarding points.
Thanks
Luis

Hello,
What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
Please help me on this and will give rewarding points.
Thanks
Luis

Com.sap.portal.htmlb in SSL

Hello,
We have implemented SSL on the portal platform (on the J2EE) and it seems to be working for the most part. We are using it with Kerberos authentication. We have noted that there are some issues and they mostly revolve around the com.sap.portal.htmlb "portalapp". Firstly, when using SSL on port 50001, items in the HTMLB component are being called without SSL VIA port 50000.
Also, we noted that there are a few files physically missing from the ../com.sap.portal.htmlb/jslib directory (for example: refresh.gif and pagerror.gif). When we manually created them, those particular errors have disappeared but we also see the:
"http://bnpdsapepc1d.corp.brucepower.com:50000/irj/portalapps/com.sap.portal.htmlb/jslib/emptyhover.html"
and
"http://bnpdsapepc1d.corp.brucepower.com:50000/irj/portalapps/com.sap.portal.pagebuilder/html/emptydocument.html"
In the trace - but we are using HTTPS for everything else...?
Is there something that points the HTMLB component to a static URL or to pick up the http with 50000? We have not made any custom changes here.
Any help would be humbly appreciated,
Judson

We seem to have figured it out. It turns out that the registration of the ktpass is very case sensative. We registered the FQDN of the host with the hostname part in UPPERCASE. Now the portal - Kerberos with SSL works fine when using the https://HOSTNAME.company.com:50001/irj. Otherwise, we receive "Action Cancelled" from the TLN and down. We checked the SSL cert and it looked lowercase so we checked the keytab and found the HTTP/[email protected] - we will try to resolve the UPPERCASE by re-running that part of the process.
Thanks,
Judson

Location of com.sap.portal.dsm.par in SP23 of NW2004

Hi all,
For an issue discovered in SP22(SAP Note 1235253), SAP has provided a work around. Thats to take a file com.sap.portal.dsm.par from SP23 and deploy using SDM.
But i am not sure in which SDA/SCA this particular file is present.
Please let me know the SDA/SCA file where i can find com.sap.portal.dsm.par.
Regards
Venkatesh

Hello,
What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
Please help me on this and will give rewarding points.
Thanks
Luis

Create SSO on SAP portal to ECC 6.0 EHP4 backend

Hello,
I want to create a SSO connection form my SAP Portal server to my ECC 6.0 EHP4 Backend system.
My JAVA Portal is installed on the same system as the ECC 6.0 backend system.
For the configuration I follow the steps as described in the document: http://www.sap-img.com/basis/configure-the-sso-single-sign-on-for-portal.htm.
At point 5.3 I have to set the Backend System as "ACL" in the Portal. So Iu2019m still in the Visual administrator from point 5.2 but now I go to the path Server --> Services --> Security Provider --> Ticket.
Here I choose the authentication tab and want to add the com.sap.security.core.server.jass.EvaluateTicketLoginModule. Buth when I press the Add button I get a list of available login members. In this list there is no com.sap.security.core.server.jass.EvaluateTicketLoginModule login module available. Does someone know what Iu2019m doing wrong or how I could add the correct login module?
I attach a screen shot from Visual administrator.
Kind regards,
Richard Meijn
Edited by: Richard Meijn on Aug 10, 2011 8:20 AM

Cahtal,
Thanks for you quick reaction but it's not all clear for me. So could you explain it a little bit more detailed fo me.
If I write something wrong please correct me. I understand the following
So If I am on the "Authentication" tab I press the Add new button
In the list which shows up I select the u201CEvaluateTicketLoginModuleu201D
Here I change the name and option value to trustedsys01=<PORTAL_SID>, <PORTAL_CLIENT>
Kind regards,
Richard Meijn

Jump target RRI from BW report to CRM Portal

Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWer

Hi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf

Multi SAP ECC Server Connection to Single SAP Portal

Dear Experts,
We have connected multiple SAP Client of same ECC server to Single SAP Portal and we are able to view data using various standard SAP ESS/MSS Objects.
Is it feasible to connect Multiple SAP ECC Servers to one SAP Portal Server for showing data from varios servers using Standard ESS/MSS Objects.
Any help appreciated.
Rgds
Gulshan

Hi Gulshan,
You are right....these are the JCO names being picked up by standard ESS/MSS applications.
The Standar DCs will be calling these JCO names only while connecting to the SAP Server.
As you described,
The portal do have system alias name as unique name.
You may need to use some customizations.....plz find the below threads...they may be of your help.
[Thread1 - Change the JCO name (RFC_META_DATA) |Change the JCO name (RFC_META_DATA);
[Thread2 - How to change the JCO reference to an existing model|How to change the JCO reference to an existing model;
Good Luck!!!
Biroj Patro.

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

SSO to J2EE application from SAP Portal

Hi
I am trying to do SSO from SAP Portal to a J2EE engine which runs on SAP Web AS.
Here are my queries
1. When I deploy a J2EE application on Web AS , I dont get any login screen. How can I make sure that if a user wants to access this J2EE application he should get a login screen and provide his login credentials first, only then would he be able to access the J2EE application.
2.When I am done with Part 1. If a user tries to access this J2EE application from the Portal (asuming the user Id's in Portal and J2EE application are same and both are in the same domain) , I should not get any login screen and should be able to view the J2EE application.
3.I want to use SAP Logon tickets generated by the Portal to enable SSO.
I have done all the necessary configurations in the J2EE server.
1. Imported the Portal's verify.der certificate.
2. Adjusted the login modules stack for the application accordingly.
Can anyone please help me out with this or throw some light.
Please help.
Thanks in advance,
Vivek
PS - Points will be definitely rewarded

Hi Vivek,
Let me give you the solution for both questions differently.
Ques 1. When I deploy a J2EE application on Web AS , I dont get any login screen. How can I make sure that if a user wants to access this J2EE application he should get a login screen and provide his login credentials first, only then would he be able to access the J2EE application.
Ans: For doing this in the code of your J2EE application you have to write a if statement which will check if the user ID is coming from the backend or not. If yes then you display that logon page else you just pass that username which is coming from backend and displ;ay the page accordingly.
Ques 2.When I am done with Part 1. If a user tries to access this J2EE application from the Portal (asuming the user Id's in Portal and J2EE application are same and both are in the same domain) , I should not get any login screen and should be able to view the J2EE application.
Ans: Yes, this is what I am explaining you. Even I had also made same kind of J2EE application in which if the user is coming from the backend then he/she will look the J2EE screen else if the username is not coming then he will se the Login screen. Exactly same as what are looking for.
3.I want to use SAP Logon tickets generated by the Portal to enable SSO.
Ans: I have used User Mapping instead of SAP Logon ticket. Well that is also the option for SSO but personally I think User Mapping is easy and better way for implementing SSO.
I dont know whether this will help you or not. Please let me know. I can definately help if you want to implement SSO using User Maping.
Regards
Pravesh
PS: Please dont forget to reward points.

SSO from Microsoft wabsite to SAP Portal

Hi
My client wants SSO from .net based Microsoft website to SAP Portals. Requirement is that when customer enters the website e.g. www.mysite.com , he will be automatically gain access (SSO) to SAP Portal .
How it can be done ?
Please help
Thanks in advance

Hi Ananda,
This link answers your query.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/interoperability/dotnet/_web%20services%20and%20a2a%20interoperability%20center/sample%20application%3a%20sso%20with%20a%20.net-based%20web%20service%20client%20using%20sap%20logon%20tickets.pdf
Reward points if handy!
Regards,
Sandeep Tudumu

SSO from Microsoft to SAP portal

Hi guys,
I am stacked in something regarding SSO, the problem here is that I have to create and ASP.net application able to create the SAPLogOnTicket and bypass the SAP portal logon screen and everytime I am using may application I have not to log in again in the SAP Portal.
Anyone who have an answer or a working example, please let me know.
Thanks in advance,
Armando

Hi Armando,
if your application is extranet application (you access it from internet) then you need to use citrix to log in to the portal without asking for username and password.
if the application is accessible from the intranet then you need to identify the application in the portal landscape system. for more information on this subject you can read the following useful help:
[Click Here|http://help.sap.com/saphelp_nw2004s/helpdata/en/ec/0fe43d19734b5ae10000000a11405a/frameset.htm]
Regards,

SSO from Non-SAP portal to EP

Hi.
We need SSO from Non-SAP portal to EP.
The Non-SAP Portal has publish Form-based authentification.
I mean userid&password set to URL.
Then the EP can generate SAP Logon ticket to backend system?
regards,

How to Enable Single Sign-on with Non-SAP Web Application
I have very good material coollected for the same implement this.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7b5ba90-0201-0010-4dbc-8f999dcd2798
Cheers!!
SJ.

Issue in Passing Value from SAP Portal through Open Doc

Hi
I am trying to pass the variables through open doc link from SAP portal.
I am trying to pass four variables.
OrganisationHierarchy
FiscalPeriodFrom
FiscalPeriodTo
Business
OrganisationHierarchy and Business are hierarchy variables.
I am testing few scenarios.Scenario1 and Scenario 2 are working fine.
But I am facing with Scenario3 and Secnario4.
Scenario1
Only two levels are passed to OrganisationHierarchy
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA++++++++++++++++++++++++++0HIER_NODE]&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is refreshed
Status: Passed
Scenario2
Only two levels are passed to Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS++++++++RKEG_WWBUS_0MATPLANT].[ATV+++++++++++++++++++++++++++0HIER_NODE];[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[TPS++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is refreshed
Status: Passed
Scenario3
When two levels are passed for both OrganisationHierarchy,Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[ATV++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is never refreshed and its keep on running
Status: Failed
Scenario4
Only three levels are passed for OrganisationHierarchy,
No values are passed for Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]; [ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[ASEAN++++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is never refreshed and its keep on running
Status: Failed
Thanks
Arun

Hello Rupachandran,
the memory id won't work as it is within the current session only.
you have two main options:
1) pass parameters in URL
2) persist the parameters somehow ( shared memory area, database table ) and pass a GUID in the URL which refers to these.
strangely enough although this is a mirror of most of the posts here, which want to launch WDA apps from standard GUI based code, the techniques are very very similar.
you might get some help from looking at this recent post Calling webdypro through R3 Function module

502 error in sending the request from F5 to SAP PORTAL

Hi All,
I face a problem in NW04S SP13 Level:
I have my Production and Development landscape where I get an HTTP Request from a Oblix Server and pass it to SAP ENTERPRISE PORTAL through F5.
In my Development Landsacpe this request is process by SAP PORTAL
but in my Production landscape it Intermittently fails.
The Only difference between my Production and Development landscape is I have multiple portal instances in my Production where as I have a single instance in my Dev.
When in my Dev landscape I login to portal and Open a ESS - Benefits application it works fine but in the Production Landscape it throws 502 ERROR.
I tried Routing the HTTP Request from my Dev Environment's F5 to Production Environments Portal, and even then it throws error Intermittently.
But If I Pass the request from my Production Environment's F5 to Development Environments Portal it works perfectly fine.
What might be the issue?
Any Idea? Your help is really appreciated.
Thanks & Regards,
sirisha.RS

Hi Rk,
I am not sure about it. Will talk to the Admin and get back to you.
Thanks & Regards,
Sirisha.RS

RRI from BI to ECC on SAP Portal

Similar Messages

Maybe you are looking for