Jump target RRI from BW report to CRM Portal
Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWer
Hi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf
Similar Messages
-
Error while RRI from BW reports to ECC CJI3 transaction
Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasadHi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana -
How to transport Jump Queries (RRI) from DPW to QPW
Hi,
I need to transport the Jump Queries from D to Q.
I have one sender Query and 2 Receiver Queries. I would like to transport them to Q. In the transport connect I can able to select the sender Query and The receiver Queries are not found.
Please let me, If I transport my sender Query will the receiver Queries will be automatically transported.
Regards,
ReddyHow have u been transporting all ur queries?
Its the sameway how u generally transport queries but make sure u find all ur 3 queries with whats underlying beneath in the flow.
In RSBBS open the assignment n on top ull see a Truck Icon - Collect & Transport. -
SAP BW report through CRM portal
Hi,
I have a requirement where we need to open SAP BW query/web template through CRM7.0 portal. Could you please tell me all the necessary configuration steps that we need to do in CRM system for carrying out this task?
Thanks,
RahulHello Rahul,
i guess you mean CRM Webclient UI - or do you mean SAP Portal?
In CRM70 webclient UI go to SPRO.
CRM->UI Framework->UI Framework Definition->Display SAP Netweaver BI Reports in SAP CRM.
Here you will find the complete documentation what you need to do.
A prerequisite is to define the RFC-Destinations in SM59 between CRM and BI.
Kind regards
Manfred -
Query in RRI / Jump Targets
Hello Gurus,
I am querying on the FI-Ageing Analysis. The report is from an infocube. I have created a jump target, which in turn goes an ODS Query. In an ageing report, I have a total Overdue Balance (OB),OB between 0-30 days, OB between 30-60 and 60-90 days. The report is displayed on the customers. When I right click the value in one of the customers 60-90 days column (for eg.) , the jump target takes me to the ODS report but it shows me the line item documents for the total balance of the customer, while I am interested in seeing the documents of only overdue between 60-90 days.
Has anyone encountered this situation. Pls guide.
Thanks in advanceHi bw,
You can pass parameters in RRI.
Use the URl for furthur details .
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
Taru Gupta -
Hi ALL,
I have a requirement where i have to Create a RRI in bex Reporting, How can i introduce RRI interface for one query to another. Is BI 7.0 supports RRI ? if so How it will process and works ,What are the settings lieing in sender and Receiver and Assgnment Details. Does Query1 and Query2 has atleast one info object common? what if not.
It would be great if anyone answer
Thanks
Dolly.Hi dolly,
For example, Suppose you created two cube CUBE A ( which contains Company code , Customer, Revenue) and Cube B (Controlling Area, Region, Price) . so There is no common column.
On cube A you created query QUERYA
On cube B you created query QUERYB
GOTO>>> RSBBS,
sender>>>CUBEA/QUERYA
REPORT TYPE>>>>BW Bex query
Target>>>> Local
receiver report>>> CUBEB/QUERYB
save it.
after you run the query in analyzer
Right click on the repor>>>> goto >>>> QUERYB. it will jump.
But Unlike the other it will just jump from QUERY A TO QUERY B. But its not jumping into the query w.r.to particular charecteristic.I mean for the respective region you can't find the detail information like product, and billing document, customer.For these thing threre should be common charecteristic.
Regards,
Ranganath -
Can multiple RRI jump targets co-exist in Web Appl.
Hi,
I have a Web Appl. with multiple jump targets. When jump to first target, system create a new window for the target report. When I go back to the main report to jump to 2nd jump target. System reuses the same sub report window to display the 2nd jump target report. It means I can have only one target report open. Is there way to work around the problem to have multiple jump target reports open at the same time?
Thanks,
FrankHi Frank,
You could do a CTRL+N on your sender report for it to open up in a new window, and then do the second RRI jump from here..but this way you will have one extra window for each target report displayed. Does this hapen even if you ALT-TAB back to the sender report? -
I have to work on some SAP BW security stuff like authorizations at infoobject level and other related stuff (ex: RRI jump targets to specific TCODE in R3 - should not have access to other TCODES from the tcode which you are in R3). I am not sure what else I need to do and this is a Brand New implementation. So if anybody has worked on the BW security, can you please provide me with any documentation you have.
Any documentation/presentations or any guidance/links in this regard will be very helpful to me.
Thanks in advance for your help
MAHIhi Mahi,
check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
RRI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
hope this helps. -
Jump from alv report to qa03 screen based on PRUEFLOS field
Hi experts,
I developed one alv report ,in that one field name is PRUEFLOS (inspection lot number).I want to jump from alv report
to QA03 screen based on PRUEFLOS field.I wrote in this way but i didn't get.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
what is the problem ?pls help me in this.Hi Ram,
Recheck:
1) You have passed 'FORM USER_COMMAND' in 'I_CALLBACK_USER_COMMAND' while calling f.m. for ALV displa, and
2) You have checked the value of user command, i.e.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE SY-UCOMM.
WHEN '&IC1'.
CASE SELFIELD-FIELDNAME.
WHEN 'PRUEFLOS'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'QLS' FIELD T_FINAL-PRUEFLOS.
CALL TRANSACTION 'QA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
ENDFORM.
Regards,
Birendra -
Jump from alv report to cor2 screen
Hi experts,
I develop one alv report ..i want to jump from alv report to COR2 screen when click on order number(field name is AUFNR).
i wrote code in this way.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD
CASE SELFIELD-FIELDNAME.
WHEN 'AUFNR'.
READ TABLE T_FINAL INDEX SELFIELD-TABINDEX.
SET PARAMETER ID 'AUF' FIELD T_FINAL-AUFNR.
CALL TRANSACTION 'COR2' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
but it is not working properly,when u click on any order number it is going only the same order number(in cor2 screen).
what is the problem? set par id (AUF) EXIST IN TPARA table compulsalory or it is created automatically?
pls help me in this . If possible pls send the code.Hi,
I have already mentioned both ways, but ok, once again.
A. how I found parameter ID ANR:
1.) run transaction COR2
2.) set cursor to field "Process order"
3.) press F1 button
4.) performance assistant displays
5.) press "Technical Information"
6.) technical information displays
7.) in field "Parameter ID" you can see parameter ID assigned to a screen field
B. how I found parameter ID BR1:
1.) switch on debugger
2.) run transaction COR2
3.) put a breakpoint on "GET PARAMETER" statement
4.) debugger stops on every GET PARAMETER statement in PBO of COR2
5.) there you can see that BR1 is used for field AUFNR
Basically first mentioned way is sufficient, because system gets parameter value from parameter ID assigned to a screen element automatically. But in this case a value is overwritten by coding in PBO of COR2.
Hope it helps.
Regrds,
Adrian -
Link from BOBJ Webi report to CRM webUI screen
Hi experts,
I was wondering, if there's a way to create a link from Webi report (based on CRM data) to webUI content in CRM? For example, Webi report will have opportunity numbers. User will be able to click on the opportunity number and get to webUI screen where he could see opportunity details and maybe even modify it.
Best regards,
VladHi,
You can link Webi Document to webUI content in CRM with help of Hyperlink based on particular column then you need to parse the data.
Once Parse button is clicked, it displays with the parts of the URL parsed into sections depending on parameters specified in OpenDocument URL.
for more information kindly go through following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0daee1d-0e38-2d10-0c91-8bb4ab5aa266?QuickLink=index&overridelayout=true&47467978778722
Best Regards,
Pushkar Dhale -
How can we download target group from sap crm gui
Hi Experts,
Please let me know, how to download target group from the SAP CRM GUI . Information: TG having 75000 BPs and using sap crm 7.0
Thanks in advance..!!
thanks and regards
VinayHi Vinay,
You can consider below link if you have already not done.
Export Target Group | SCN
Also found below note/s which may not be appropriate for the version that you are working, still will give some hints on how to go about it especially when you have more BPs to be downloaded.
490694 - Target group export from CRM Online to application server
459913 - Target groups: Exporting BPs to application server
Rgds
Hari -
Report-to-Report Interface, Jump Target
Dear Friends,
Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
ThanksH I Ramesh,
see best example.. genrate one query on master data... and another query on transactiona data..( but make sure that... your transactional query should contain atleast one field that exist in first query)
for example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS)
nad generate second Query on Employee transactional data ..( that contain..
EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
now go to RSBBS tcode... and give the first query name.. and in the down give the second query name..save it..
now go to BEX and execute your first query.. and in that select any EMPLOYEE NUMBER and right click it--> and select second query name.. ..
now you can able to see that particular employee details only..
regards
@jay -
I have a query with a jump target which is another BW query. When the sender query is run in BEx i can go to the jump target and it excutes fine with the proper filter values being passed. When the sender query is executed from the web the jump target query comes up but no filter values are passed. Any suggestions would be appreciated.
Stan PickfordHi Rashmi,
This note 1176550 might solve the issue depending on your SP.
Also review the application rules for hints -> note 1053310.
Thanks,
Michael -
How transfer target group from CRM to CDB
Dear all,
i created a new target group.
I would it's transferred in CDB and I thought that the system would have done it automatically.
It appears that there is any kind of error (the target group is also in active status) but the situation is that the target group isn't in the CDB table and i don't find any adapter object or kind of report in CRM.
I'm working with CRM 4.0
Can someone help me?
Thanks in advanced!
Best regards,
GiuseppeHi,
target gruop should be transferred into CDB automatically
when it is assign to the marketing campaign or promotion and
MSA user has active subscription for Promotions & Campaigns.
regards, Robert
Maybe you are looking for
-
BOS problem in Sales Order (Pricing error)
Hello every one, In my project i am getting scenerio of BOS- Bill of services. Now in that when i am creating sales order i m puting material and everything. Now at item level in am selecting "SERVICE" tab. When i am putting service there i am gettin
-
How do I install iCloud on my mac
I have recently installed Snow leopard and Lion and everything is working fine, but I can't access my cloud as an app like I can on my other mac. I can get to the icloud, but I want to use 2 computers to upload files, etc.
-
I currently watch the CBS News on my MacBook Pro. I have a Smart TV that connects to my newwork but it cannot stream the news when I go to the CBS website. Is there a way that I can stream the news from my MacBookPro into the TV via my WiFi (Airpor
-
This should be a simple function but...
i cant seem to figure it out. Hi everyone! I am working on a spreadsheet to help keep track of my finances but cannot figure out one very important formula. Heres an example of what i want to do. In cell A1, I've got the balance of my auto loan. In c
-
BACKUP INCREMENTAL 1 FROM SCN 2083442766 database tag 'FORSTANDBY';
Hi all, While taking a incremntal backup for stadnby at primary DB, rman got failed RMAN> BACKUP INCREMENTAL 1 FROM SCN 2083442766 database tag 'FORSTANDBY'; RMAN-00571: =========================================================== RMAN-00569: ========