RRI question: Query to a drilldown template...

hi all!
I have a query that contains a variable screen where you have to put in a value before the result is shown (variable called "HOURS").
I have a copy of the main query 8incl the variable called "HOURS"), that is going to be used as a GOTO report.
Here is the senario:
After doing some filtering on the query, I want to see more detail information through a GOTO report.
The problem is that I need the GOTO report to automatic filter on the value a pick out in the variable "HOURS" in the main report.
Now I have to pick the same value again, and execute the GOTO template.
Question:
How can I get the GOTO to automatic pick up all filters (incl variable_screen filters on HOURS) from the main query??
Thanks

hi,
Make sure u click on the item u want
eg
If the first report show
Europe
US
APAC
if u want europe data the right click on europe then the variable will be filled accordinly.
regard
zubair

Similar Messages

  • While executing the query in the web template I am  facing below issue

    Hello SAP geniuses,
    Please help me on my issue  ,
    while executing the query in the web template i am  facing below issue.
    The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone  but when we are executing the query with out webtemplate it is showing both variable and free characteristic
    can anybody help us to identify what is the issue with the web template.
    Thanks
    Alok

    Hi,
    Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
    if not check ur authorisation.
    Regards....KP

  • RRI: BEX query to webadress(is SRM ITS base URL with passing value to it)

    Dear friends,
    I am doing RRI from query to webaddress,
    i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
    here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
    jump is working from portal(from bex query ivew).
    but i want to pass value(shopping cart value) to above url and want to skip first screen.
    i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
    i tried the diffrent combination of url and field assignment as like below:
    1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
    assigned field: GS_HEADER-OBJECT_ID
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
    2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
    assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
    but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
    http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
    I have seen the source code of that url(inital screen and after entring the value to that screen) too.
    how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
    Thanks and regards,
    Dushyant.

    Hi,
    i have replied wrong,
    i mean that
    when i am trying this,
    http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'
    with field assignment: shopping cart number = GS_HEADER-OBJECT_ID (for drill down on particular field, i.e. open the URL with this field value entred from sender query's field shopping cart number)
    result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'&GS_HEADER-OBJECT_ID=10000456
    and when try this:
    http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
    with field assignment: shopping cart number = GS_HEADER-OBJECT_ID
    result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID=10000456
    but not skiping the initial screen.
    Thanks.

  • Adding a query to the approval template

    Hello
    I'm trying to setup an approval template for AR Invoices based on a UDF.
    Basically I want to add a query to the approval template that will trigger an approval request based on the following query
    but i don't know how to set it properly.
    trigger an approval when:
    select * from OINV where u_ordertype = 'sub'
    any help would be appreciated it!
    Mike

    Hi Mike,
    Try this:
    select 'true' from OINV T0 where T0.u_ordertype = 'sub' and T0.DocNum = $[$8.0.0\]
    Thanks,
    Gordon

  • BW 3.5 - Web query - Sorting in drilldown.

    Hi BI Experts,
    I have a Web query, with a drilldown box. By default, the list in the drilldown is sorted by key. However, I would like to sort the list based on the text.
    Any pointers on this would be a great help.
    Best Regards,
    Nidhi Sharma

    hi nidhi,
    Welcome to SDN.
    You must have assigned a dataprovider to the drilldown box.And you must have also assigned a specific characteristics.
    In the query change mode, change that characteristics property to Display->Text.
    And set the sort order.
    the same will have effect in web query too.
    hope it helps,
    regards,
    Parth.

  • RRI Jump Query opens the receiver query in standard Template??

    Hi,
    Few questions from me (Note I have searched the forum database for answers but didnt get a convincing answer)
    1) How can I use 1 web custom built template for 2 different queries?
    2) I have created the sender receiver setting for the Jump queries. The problem that I am facing is that the sender query uses the custom built web template but when I use GOTO the receiver query instead of using the custome template it executes in standard webtemplate. Kindly suggest how can I open the receiver query in the custom built web template after GOTO function.
    Thanks for all your help in advance..
    - Amit

    Hi SS,
    I agree to the statement that RRI uses link to Query but if we setup the custom web template for that jump query in WAD....it will never open in that template via RRI ???
    That very disappointing discovery for me !!!
    Any other possiblity to make this work????
    What if I have the sender and receiver query web template(custom) same???.is it possbile to use the same template for these two template even after jump ???
    Regards

  • Query Documentation on Web Template ??

    Greetings BI Experts,
    I am using a standard Web Template 0ANALYSIS_PATTERN, made a copy of that to ZTEST1. I attached my query to the template and ran it.
    The  results came in fine ..what is worrying me.is that the user when clicks on the INFORMATION  field ..there is a TAB for Query Documentation  and that is empty.
    How do we create the documentation for a query...like general information and what kind of formula we are using etc.etc
    Do we have to write the documentation at the query level if yes how do we achieve that.
    I can see a Documents button in BI 7.0 Query Designer...
    We are currently on BI 7.0 SP 14
    Your responses will be reciprocated with points
    Thanks

    Hi there, any replies? Should I summarize my question?
    How do you notify users when data is not reliable? (caused by, for instance, data loading errors, query maintenance... so on).
    I once used system messages (sm02) to notify all those data failures, but now we want the notification not to be global, but to be specific for some user groups (or query groups), and visible when they execute any query.
    Thanks again,
    David.

  • Fix table header line of Query in default web template WAD 7.0

    Dear all,
    I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query. 
    My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
    Many thanks in advance for your answer and help!!!
    Best regards
    Abdel

    Hi Dion,
    Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
    Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested. 
    Best Regards
    Abdel

  • Question regarding the default web template for queries

    Hello,
    I am trying to learn the default web template that is using for queries:
    0QUERY_TEMPLATE_BROADCASTING70
    I see that it's <bi:QUERY value="" /> is empty which is logic since the query will be inserted on runtime. My question is, where in the web template does it say that? I can't see any parameter it expects to get with the query's technical name not at the webtemplate code nor at the URL...
    Roy

    Roy,
    I think you are mixing things. The template you are mentioning is used for queries that are executed from the query designer. It's not a web template as any other one you create for your users. So, this web template has some parts in it's code that works with the query execution. When you run a query, the system takes the query definition (made in QD) and executes it with the web template indicated for the query. This determination is made by the program that is used to run queries. You can try using RSRT transaction to debug and check how this it's done. If you want to change the default web template used by query designer to run the queries, you should do it copying any standard template, like the one you mentioned. If you don't do it, you won't get the information correct.
    Hope this helps.
    Regards,
    Diego

  • Problem of Query in Portal (web template)

    Hi BWs experts,
    I have a problem with a query.
    I'm working on BI7 (BI java patch 12 and BI  abap pacth 14).
    The query is good working in BEx Analyzer.
    Bus when  I execute it in a portal like a web template, it doesn't work. The following error occurs :
    Begin of message error
    ABEND RSBOLAP (000): Program Error in class SAPMSSY1 method  : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program Error in class SAPMSSY1 method  : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Error program in class SAPMSSY1
    method  : UNCAUGHT_EXCEPTION
    ABEND: System error in progr. CL_RSMD_RS_SPECIAL and form. GETSID-01
    End of message error
    In the default values (= filter) I'm using a variable for a characteristic C. If I delete this default value in query designer, the query works in portal. If i put a filter (constant or variable) to this characteristic C, the query bugs in portal.
    So I don't know why it doesn't work.
    I hope you can help me to resolve this problem.
    Points will be assigned.
    Best cheers,
    Vince.

    hi,
    we're now getting the same message although that is after applying the java patch 12.
    what exactly was the problem with the info-object? and what did you do to fix it?

  • IPhoto email shows question mark instead of email template

    I sent some photos using iPhoto last night, i have gmail account i use to send photos. I learned after i had emailed the photos through iPhoto my receipts received the email with a question mark instead of the iPhoto template. I tried sending a couple to myself and my wife (she has hotmail if it matters) but all of them showed the question mark i attached a photo below. Any help in fixing this would be great.
    Thanks

    probably not right format....
    i think that the iphone only supports .jpg or whatever but i am not 100% on that

  • How to get the standard Menu of Query Designer into Web Template

    Hi Experts,
    is there a way on how to put the standard menu within Bex Query Designer (after executing a Query with the Query Designer you get into ad-hoc reporting with a menu including several functions like print, show as..., properties, etc) into an individual Bex Web Template?
    Copy & Paste source code will not work I guess because of several javascript functions I don't have access to.
    Thanks & Best regards
    Tobias

    BEx queries are displayed on the web using standard web template 0ANALYSIS_PATTERN or some customized version base don your implementation.
    You can either include the 0ANALYSIS_Pattern web template in your custom template or use Save as to create a new template with 0ANALYSIS_Pattern  AS THE STARTING POINT.

  • How to show Descriptions of Query on a Web template(statistics)

    hi I have created a custom Query which shows data for certain queries running, but the data keeps on showing me technical name of the queries, I want my report to show description so it makes sense to my manager as they donu2019t understand technical names of the queries. I have tried changing them to text, key etc they wont work.
    Query is 7.0 web template is 7.0

    Amer,
    Actually, the way I read these notes, showing the technical name on the query selection screen is the problem (a.k.a., "symptom") that is being addressed, so I am assuming that the "fix" they are implementing is to show the description instead.
    Just trying to help...
    Bob

  • Display technical name of a query in a web template ?

    Hi,
    I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
    I have selected 'Display General Text Elements' in properties of the web item.
    In the property 'List of Text Elements', what is the couple of values that I have to configure ?
    Many thanks,
    CG.

    Hi,
    What you need to do is, keep a TEXT Web Item in the template.
    Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
    This will give the technical name of the query in the output.
    Common text elements:
    u2212 technical name of the query (REPTNAME)
    u2212 description of the query (REPTXTLG)
    u2212 InfoProvider (INFOCUBE)
    u2212 key date for the query (SRDATE)
    u2212 accuracy of the data (date and time) (ROLLUPTIME)
    u2212 the person who wrote the query (AUTHOR)
    u2212 the last time the query was changed (date and time)
       (MODTIME)
    u2212 the last person to make changes to the query (MODUSER)
    u2212 current user (SYUSER)
    u2212 the last time the query was refreshed (date and time)
       (SYUZEIT)
    Try this. Hope it helps.

  • Filtering values of a query in a web template through URL. Help please!

    Hi all,
    I've designed some web templates based on 3.x queries and I'm facing a problem trying to filter the values the users can see, though URL.
    I know how to filter a value of a characteristic in the URL, for example:
    http://.../SAP/BW/BEX?...&CMD=LDOC&TEMPLATE_ID="web_template_name"&FILTER_IOBJNM=0AREA&FILTER_Value=001
    It shows the default values for the characteristics (Area=1), but it doesn't restrict the query to these values. The problem is that the user can choose another value of the characteristic, through the navigation_block for example (Area=2 or 3 or...).
    What I need is to restrict the query in the URL with some values (Area=1 for example) so that the other areas don't appear in the query.
    I've read some documents but I don't have the solution yet. For example:
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
    Any ideas please??
    Iñaki

    Hi,
    For your scenario you could use variables which are not changeable during runtime. Please refer to the following documentation. If you do not check the option 'Can Be Changed with Query Navigation' the variable will not be changeable during navigation.
    http://help.sap.com/saphelp_nw04/helpdata/en/22/1e9b3c334d8c15e10000000a114084/frameset.htm
    If you want to restrict certain users to certain data please also consider the authorization concept, which is the safest way of doing this.
    Best regards,
    Janine

Maybe you are looking for