RS480M2-IL and 6600GT pciE lockup issue, please help....

I have an MSI RS480M2-IL motherboard and an eVGA 6600gt pciE video card and some major problems.
System Specs:
eVGA 6600gt pciE 128mb
2 WD 320GB SATA drives (not in raid)
Chaintech 7.1 pci sound card
A64 3000 939pin with Artic Cooling Freezer64 cooler
Forton Source 450W psu (atx 2.0 with more than enough amps and watts)
512MB corsair value 3200
512MB mushkin decent memory
Problem:
Whenever I play games (battlefield2, gun etc) the system always crashes within 1 hour
The temperatures never get high, in fact the cpu temp is only a little above idle after gaming for 45 minutes, and the GPU never exceedes 60 degrees
What will happen is this:
The game will be running fine, 40+ fps no lags or anything, then all of the sudden it will freeze and a few seconds of sound will repeat themselves. Sometimes the game comes back within about 20 seconds, but sometimes it does not and the system resets itself. I can sometimes alt+tab back to windows and force quit the game through task manager. When I do this I get an error message telling me that nvdisp driver has quit working and to reset.
I have tried:
Using onboard sound (no difference)
Taking out one stick of memory (no difference except this creates lag in games)
Many different set of geforce drivers (they all have the same problem)
Any suggestions would be greatly appreciated. Thank you.

I know from reading the BF2 forums you are not alone. A lot of people started having probs around the 31 of Oct, apparently after a PB update was pushed out via BF2 server logon. I was having some probs and tried updating all my drivers and BIOS which is how I found myself here. I coud not get my video card to work (ATI 9800 Pro)at all after flashing to 9.2, but after changing a few settings I at least have my video card back. I have not tried BF2 yet, that seems to be the overall test of any component. I am not suggesting you flash your BIOS by any means (more trouble that it may be worth), but your problem may be with PB, at least that is what the conspiracy threorists will preach.
check this and see what happens...https://forum-en.msi.com/index.php?topic=89456.0, it helped me
On the forums for BF2, I think at totalBF2.com, there were some potential fixes, but I have not tried any yet as I wiped my system to begin to unscrewing what I had done already.
Good luck and let us know what happens....

Similar Messages

Battery with X and an "alleged" spill issue - Please help

Hi Everyone, This is my first post here. I had an X on my battery (which seems to be a common issue) and I tried everything in the forums and it did not work. Later, I called apple support and they sent me a new battery. This did not solve the problem either. So, I sent the mac in for repairs and they told me that the logic board has corrosion due to liquid spill, and apple care would not cover it. The sad part is that I can vouch for the fact that there was no liquid on or around my laptop, since I use it for my research and no one can borrow it because of the restricted material (graduate school requirements). Please help, and let me know if there is any way out of this. Is there anything other than spillage that can cause this corrosion on the logic board?
PS: The logic board had to be changed within two months of buying it, when the display stopped working, and so this is the third logic board within a year (pretty exciting life for a little mac book!).

Thanks for the reply micheal, but is'nt it unfair that they think it is my fault, when my macbook went bad in a couple of months? I am sure it would be very difficult for me to prove that I am not at fault, but even they cannot prove their innocence (remember that the product has been opened by them and not me!). I feel like smashing the same laptop that I liked so much and buying something else, just to get over this. If any one has any experience with such issues, please let me know a sensible way of handling it. It is my word against theirs and I am losing sleep and possibly $1400 or so...any help is appreciated.

Newbie problems installing Flash 11 and windows 7/SWF issues-PLEASE HELP!

I am VERY new at Dreamweaver (llike four days in) - my church has a website & they need someone to take it over so I'm trying to help out while teaching myself something new.
I was doing okay til now. I downloaded a free template to play with so as not to mess up their real site just yet. I was able to get the majority of the site up except for the top part with flash. Error message says: "this page contains some SWF objects that may not work properly in the most recent versions of IE. Dreamweaver cannot convert them to SWF markups. Please delete each of them and insert again" This mesage comes up on the index.html, index-1.html, and index-2.html pages.
I deleted & re-typed everything that had an SWF in it (then realized maybe I only needed to do the ones with the .swf extension, duh on me!) but I'm still getting a gray box with the "f" inside.
Additionally, I keep having to re-install Flash because it says I have to use version 10 or higher - the browserlab worked during the online lessons offered by Adobe, but now it won't work at all! I installed Flash 11 more times than I can count but it still won't work, yet when I go to my Programs flash it's installed twice - once as a 64 bit and once without. I'm assuming one of those can go.
I'm familiar with HTML and have created smaller websites using templates on sites like Yahoo Business, Wix and Office Live and thought I could handle this, but it's really stumping me, thought there'd be a learning curve and trial/error but WOW! Much respect to all you web designers out there, this stuff is no joke!
If anyone could please help me fix this problem and dumb your answer down as much as possible cuz I'm admittedly very lost! I'm worried that I'll have the same problem with the church site because they want some flash aspects. Did several internet searches & couldn't decipher the programmer jargon, nor could figure out if I was doing the suggested fixes correctly.
Thanks in advance for the help from anyone! I have a brand new computer, dell xps15 only 3 weeks old, so it's not the computer!
Anne

FYI: Dreamweaver questions are better answered in DW's General Discussion Forum.
http://forums.adobe.com/community/dreamweaver/dreamweaver_general?view=discussions
Older versions of DW used an Active-X JavaScript to initialize Flash in IE browsers. Adobe later switched to a different script in CS4 and again in CS5 and CS5.5 which uses SWF Object Replacement. I suspect your Template was made with an older version of Flash & DW which is why you're getting the nag screens.
Option 1: Preview the original template pages in browsers. If it works, ignore the DW error messages.
Option 2: Rebuild the Template by stripping all Flash object and embed code and removing links to any Flash supporting scripts. Then re-insert your media. Insert > Media > Flash...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

i have the same problem...my ipod is 4th generation?uggghhhhh

I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs mem

I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

I am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

i am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

Hey alkarim2008,
If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Resolve iOS update and restore errors in iTunes - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Trackpad Issue - Please Help!

Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
J

I'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related.

Transport Issue Please help

Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
Samit

Hi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D

Headerrenderer issue -Please help

Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>

I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HT4759 I find the delete button on my iPhone and iPhone wrong goes wrong please help thanks

I find the delete button on my iPhone and iPhone wrong goes wrong please help thanks

Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Something is happening to my applications downloaded from store......i don't know why. my applications(opened with launchpad) shows 5(4transparent and 1usable)iMovie icons.someone please help me

something is happening to my applications downloaded from store......i don't know why. my applications(opened with launchpad) shows 5(4transparent and 1usable)iMovie icons.someone please help me

Hey srihari4b6,
Thanks for using Apple Support Communities.
Since there are a few apps that this is happening to you may want to take a look at this article.
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/HT1199
If the issue occurs in various applications, or in Mac OS X
Have a nice day,
Mario

Sprint Iphone Network issues, Please help!

I have an iPhone with sprint, and it has worked more than amazingly prior to this. It wasn't until last night around 12am that this started. I have had the phone for 4 to 5 months now. The bars in the top left are flat and occasionally one will pop up. I can t make calls and texts are slow to or just don't send at all. I was messing around on my download app in the browser and it closed and then thu problem arises. I have deleted the app even turned on and off my phone several times and turned airplane mode on and off several times. Please help:/ this is not an issue with location, and everytime I make calls it just says "calling mobile..." and everyone else in my house has 3g+ service... please help!:/
I am trying to restore and older version just because im out of options. I am getting really worried about this.

You cannot restore to an older version of ios.
Have you tried a reset?
Restore?

RS480M2-IL and 6600GT pciE lockup issue, please help....

Similar Messages

Maybe you are looking for