RSA VPN on 10.4.10
I'm trying to use the built in VPN software with the mac. My company uses RSA Secur-ID as authentication.
I'm able to log in just fine, can connect to our exchange servers, but I'm not able to browse the web. We have no restrictions in place, ( I was on the phone with the head of security for an hour ). Support said they can see my traffic leaving and coming back, but using Firefox I can only get google and our company web page to resolve.
Ideas?
Do you need more info?
I'm stumped as to why other web pages won't load, firefox just sits there and spins forever.
Safari does the same thing.
Hi
Wouldn't this question be better answered in the Getting Online & Networking Forum? http://discussions.apple.com/forum.jspa?forumID=755
Steve
Similar Messages
-
Native iOS L2TP VPN not working on Lion Server
Hi Folks,
I have a very strange issue concerning making VPN work on two iOS devices I have. I have recently setup Lion Server on a MacMini here in the office with L2TP VPN using a shared secrert phrase and a password authentication.
I have Lion running on an a MacBook Air (which I setup VPN using the provisioning profile "VPN.mobileprovision") and Snow Leopard running on an iMac. (VPN was set up manually). Both systems have been tested to work both inside and outsideof my internal network as I have tested with an air card.
I also have an iPhone running 4.3.4/4.3.5 that I setup by emailing the provisioning profile and and iPad 1 running iOS 5 beta 4 setup with the vpn provisioning profile. Neither the iPad nor iPhone seem to work at all either internally nor externally. In fact I never see any activity in the vpnd.log when I attempt to connect to with these devices. All I get is the standard "The L2TP-VPN server did not respond. Try reconnecting. ..."
Based on my success with the OSX Clients both inside and outside my local network I feel it is safe to say that I do not think the issue resides on the Lion Server nor the network/firewall configuration. I am running a Time Capsule with FW 7.5.2/7.4.2. There was no change in behavior with either version of the Time capsule firmware for the clients whether they were OSX or iOS. I must be clearly missing something here and I don't know what. Any help any of you could provide would be greatly appreciated. Thanks!
Please see the below settings for my VPN Settings on the host and iOS client
root# serveradmin settings vpn
vpn:vpnHost = ""
vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains:_array_index:0 = "ri.cox.net"
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.15.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.pptp:enabled = no
vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.15.224"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.15.254"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains:_array_index:0 = "ri.cox.net"
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.15.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.l2tp:enabled = yes
vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = <>
vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.15.241"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.15.249"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"Issue is resolved. I used the initial random generated shared secret that was generated by Lion Server. The shared secret has special characters. IOS did not like the special characters. See iPhone Console Log below:
Jul 26 20:00:36 iPhone-4 racoon[718] <Info>: [718] INFO: @(#)This product linked OpenSSL 0.9.7l 28 Sep 2006 (http://www.openssl.org/)
Jul 26 20:00:36 iPhone-4 racoon[718] <Info>: [718] INFO: Reading configuration from "/etc/racoon/racoon.conf"
Jul 26 20:00:36 iPhone-4 racoon[718] <Info>: [718] ERROR: /var/run/racoon/68.9.232.78.conf:6: "?gLA" syntax error
Jul 26 20:00:36 iPhone-4 racoon[718] <Info>: [718] ERROR: fatal parse failure (1 errors)
That is why I never saw any attempt to connect. The actual process would bomb out before attempting to make a connection to the server.
The shared secret key was:
Y|WNwvM_O"?gLA$F@adT
Looks like it was the " or the ? symbols.
Once I changed the shared secret key the issue went away and the iPhone and iPad could connect to vpn without issue.
Figured I'd let you all know -
Snow Leopard Server VPN and Android Client
Hi
I have a VPN which works absolutely fine with various (Apple) products. However, I have never managerd to get an Android device to connect to the VPN. Would anyone have any clue as to how to work around this?
FWIW, the VPN is set up to use L2TP over IPSec with a shared secret. The gateway firewall is set up to allow pass through for VPN protocols and the appropriate ports have been mapped to the server. The system works fine for Macbooks of various flavours, iPod, iPad and I believe it's been tested with a Windows box (may have turned on PPTP for that. Can't remember). All this points to a flaw in the Android VPN client - which seems to be something of a known issue but beyond my understanding.
With the above in mind, anyone got a sensible work around (other than the daft suggestion that someone will inevitably make wrt buying an iPhone)?
TIA
SimonFat Freddie, we're thrilled you got it working on your Nexus 7, would you care to share HOW you got it up and working? What were the server settings. I'm trying to get it setup on a Nexus 4 running 4.2.1, and it is getting the same LCP timeout in the logs that the poster "l4r5" was reporting.
Did you get this and solve it?
Here are my config settings:
vpn:vpnHost = ""
vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains:_array_index:0 = "home"
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.1"
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:1 = "<redacted>"
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:2 = "192.168.1.11"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.pptp:enabled = yes
vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.240"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.254"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains:_array_index:0 = "home"
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.1"
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:1 = "<redacted>"
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:2 = "192.168.1.11"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.l2tp:enabled = yes
vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = "<>"
vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.224"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.239"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
Can you see any discrepancy?
Thanks in advance. -
Mountain Lion VPN server "IPCP maximum config-requests exceeded" error
I have OS-X Server running on Mountain Lion 10.8.4 I had to reinstall the system due to a hard drive failure and ever since reinstalling OS-X server the VPN service has been driving me mad. Every so often without any obviosu reason the service starts failing and comes up with a "IPCP: Maximum Config-Requests exceeded" error. On the client side it looks like Connecting >> Authenticating >> "You have ben disconnected" message. It seems like this happens every time you restart the machine (so after a fresh restart I can NEVER log in at all and get this error) and switching the VPN service off and back on again in Server app gets rid of the problem every time. Then the problem comes back sometimes after a few minutes, sometimes ater a few hours or days even. I have the exact same settings as I did before where it ran without fault for months and would be back up and running after power failures and automatic restarts. I have not found one single thread anywhere where someone could explain what this is and the best solution I have seen so far was to write a script to turn the VPN server off and back on all the time. Could someone PLEASE help me here. Ay help at geting rid of this problem would b very much appreciated!
VPN not working:
vpn:vpnHost = "XX.XXX.XXX.XX"
vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains = _empty_array
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.pptp:enabled = yes
vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.240"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.254"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains = _empty_array
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.l2tp:enabled = yes
vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = <>
vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.225"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.239"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
vpn:Servers:com.apple.ppp.l2tp:L2TP:IPSecSharedSecretValue = "xxxxxxxxxx"
VPN working:
vpn:vpnHost = "xx.xxx.xxx.xx"
vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains = _empty_array
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.pptp:enabled = yes
vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-RSA"
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:_array_index:0 = "MPPE"
vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.240"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.254"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains = _empty_array
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:_array_index:0 = "192.168.1.254"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:_array_index:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.l2tp:enabled = yes
vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:_array_index:0 = "EAP-KRB"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:_array_index:0 = "DSACL"
vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:_array_index:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:_array_index:0 = "DSAuth"
vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = <>
vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:0 = "192.168.1.225"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:_array_index:1 = "192.168.1.239"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes = _empty_array
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks = _empty_array
vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
vpn:Servers:com.apple.ppp.l2tp:L2TP:IPSecSharedSecretValue = "xxxxxxxxxx" -
VPN problems with SLS 10.6.2 using L2TP
Hi folks,
I see I'm not the only one having problems with getting VPN to work.
Well, I've gotten PPTP to work just fine but I do need to get L2TP to work as well.
The strange thing is that when I try using L2TP the log is completely silent.
I'm running Snow Leopard Server 10.6.2 with the built-in firewall.
I've tried turning of the firewall but still no log-entries...
I've double checked that all the ports are open, I've tried changing the VPN IP series.
I've tried to enable both DHCP and NAT... still nothing seems to do the trick.
Any ideas?Here are my VPN settings:
vpn:Servers:com.apple.ppp.pptp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedSearchDomains = emptyarray
vpn:Servers:com.apple.ppp.pptp:DNS:OfferedServerAddresses:arrayindex:0 = "*servers external ip*"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:arrayindex:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:arrayindex:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:arrayindex:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.pptp:Radius:Servers:arrayindex:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.pptp:enabled = yes
vpn:Servers:com.apple.ppp.pptp:Interface:SubType = "PPTP"
vpn:Servers:com.apple.ppp.pptp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorEAPPlugins:arrayindex:0 = "EAP-RSA"
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorACLPlugins:arrayindex:0 = "DSACL"
vpn:Servers:com.apple.ppp.pptp:PPP:CCPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.pptp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.pptp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize128 = 1
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorProtocol:arrayindex:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.pptp:PPP:MPPEKeySize40 = 0
vpn:Servers:com.apple.ppp.pptp:PPP:AuthenticatorPlugins:arrayindex:0 = "DSAuth"
vpn:Servers:com.apple.ppp.pptp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.pptp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.pptp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.pptp:PPP:CCPProtocols:arrayindex:0 = "MPPE"
vpn:Servers:com.apple.ppp.pptp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:arrayindex:0 = "10.0.1.101"
vpn:Servers:com.apple.ppp.pptp:IPv4:DestAddressRanges:arrayindex:1 = "10.0.1.150"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteAddresses:arrayindex:0 = "10.0.1.0"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteTypes:arrayindex:0 = "Private"
vpn:Servers:com.apple.ppp.pptp:IPv4:OfferedRouteMasks:arrayindex:0 = "255.255.255.0"
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingAddress = "1.2.3.4"
vpn:Servers:com.apple.ppp.l2tp:Server:MaximumSessions = 128
vpn:Servers:com.apple.ppp.l2tp:Server:LoadBalancingEnabled = 0
vpn:Servers:com.apple.ppp.l2tp:Server:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:Server:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedSearchDomains = emptyarray
vpn:Servers:com.apple.ppp.l2tp:DNS:OfferedServerAddresses:arrayindex:0 = "*servers external ip*"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:arrayindex:0:SharedSecret = "1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:arrayindex:0:Address = "1.1.1.1"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:arrayindex:1:SharedSecret = "2"
vpn:Servers:com.apple.ppp.l2tp:Radius:Servers:arrayindex:1:Address = "2.2.2.2"
vpn:Servers:com.apple.ppp.l2tp:enabled = yes
vpn:Servers:com.apple.ppp.l2tp:Interface:SubType = "L2TP"
vpn:Servers:com.apple.ppp.l2tp:Interface:Type = "PPP"
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoFailure = 5
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdle = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorEAPPlugins:arrayindex:0 = "EAP-KRB"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorACLPlugins:arrayindex:0 = "DSACL"
vpn:Servers:com.apple.ppp.l2tp:PPP:VerboseLogging = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:IPCPCompressionVJ = 0
vpn:Servers:com.apple.ppp.l2tp:PPP:ACSPEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoInterval = 60
vpn:Servers:com.apple.ppp.l2tp:PPP:LCPEchoEnabled = 1
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorProtocol:arrayindex:0 = "MSCHAP2"
vpn:Servers:com.apple.ppp.l2tp:PPP:AuthenticatorPlugins:arrayindex:0 = "DSAuth"
vpn:Servers:com.apple.ppp.l2tp:PPP:Logfile = "/var/log/ppp/vpnd.log"
vpn:Servers:com.apple.ppp.l2tp:PPP:DisconnectOnIdleTimer = 7200
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecretEncryption = "Keychain"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:SharedSecret = "com.apple.ppp.l2tp"
vpn:Servers:com.apple.ppp.l2tp:IPSec:AuthenticationMethod = "SharedSecret"
vpn:Servers:com.apple.ppp.l2tp:IPSec:RemoteIdentifier = ""
vpn:Servers:com.apple.ppp.l2tp:IPSec:IdentifierVerification = "None"
vpn:Servers:com.apple.ppp.l2tp:IPSec:LocalCertificate = **
vpn:Servers:com.apple.ppp.l2tp:IPv4:ConfigMethod = "Manual"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:arrayindex:0 = "10.0.1.10"
vpn:Servers:com.apple.ppp.l2tp:IPv4:DestAddressRanges:arrayindex:1 = "10.0.1.100"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteAddresses:arrayindex:0 = "10.0.1.0"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteTypes:arrayindex:0 = "Private"
vpn:Servers:com.apple.ppp.l2tp:IPv4:OfferedRouteMasks:arrayindex:0 = "255.255.255.0"
vpn:Servers:com.apple.ppp.l2tp:L2TP:Transport = "IPSec"
vpn:Servers:com.apple.ppp.l2tp:L2TP:IPSecSharedSecretValue = "*****" -
VPN Login first with RSA and then AD?
I've run in to a situation I hadn't considered when we stood up our RSA 2-factor authentication for VPN. We use AnyConnect clients to hit our Cisco VPN concentrators which then passes off authentication responsibilities to ISE and ISE knows which Identity Store to use based on where the authentication request is coming from and what group(s) a person belongs to.
We now have a service provider that that will reach right in to a product they manage for us when we call and say there is a problem. However, the tech/engineer assigned to the issue could be one of many from their pool of available resources. The service provider only wants 1 token which will be "locked up" and the PIN "locked up" separately as well so when we report a problem they can connect and resolve it.
I won't issue a single token to them because they are associated with AD accounts but I could create a generic account local to RSA they could authenticate against if they could then auth with their AD creds before connecting.
So my question is has anyone done this? Is it possible to have AnyConnect ask for SecurID authentication and then come back with a prompt for AD authentication?
ThanksHi Darren,
should be no problem, using double authentication:
aaa-server myLDAP protocol ldap
aaa-server myRSA protocol sdi
tunnel-group foo general-attributes
authentication-server-group myRSA
secondary-authentication-server-group myLDAP [use-primary-username]
This will prompt for 2 usernames & 2 passwords, unless you add "use-primary-username" but I guess in your case you do need 2 different usernames.
hth
Herbert -
ISE Authentication Policy for RSA Securid and LDAP for VPN
We are working on replacing our existing ACS server with ISE. We have 2 groups of users, customers and employees. The employee's utilize RSA securid for authentication while the customers use Window authentication. We have integrated the AD into ISE using LDAP and this has been tested. We are now working on trying to get the rsa portion to work. We are wanting to utilize the authorization policy to assign the group-policy/IP for both clients via the LDAP user attributes.
Here is my question:
Under the authentication policy should we look @ an identity store that has RSA securid users, LDAP users and then internal users. I assume if the user isn't present in the RSA store it will then look @ the LDAP, will this present an issue with overhead in our RSA environment. With the legacy ACS the descsion on where to authenticate the user was done on the ACS, either Windows or RSA. The employee users will still also be present in the LDAP so we can utilize the attributes for IP address/group policy. The number of customer vpn's is several times larger than employees and I am afraid that if we have to query the securid servers for every authentication vpn authentication attempt this could cause issues. Our utilimate goal is to move to any connect and utilize a single url for all authentication but allow ise to instruct the asa what attributes to hand to the client such as dns/Dacl.
Thanks,
JoeThat is not what I want. I want user "test1" to be able to do this:
C
Username: test1
Enter PASSCODE:
C2960>en
Enter PASSCODE:
C2960#
In other words, test1 user has to type in his/her RSA token password to get
into exec mode. After that, he/she has to use the RSA token password to
get into enable mode. Each user can get into "enable" mode with his/her
RSA token mode.
The way you descripbed, it seemed like anyone in this group can go directly
into enable mode without password. This is not what I have in mind.
Any other ideas? Thanks. -
Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?
.
-
Mac Lion can't connect to Cisco VPN with RSA authentication
Hello,
We have a problem with a manager who has upgrades his Mac to the latest Lion OS (64 bit), before uograding he could connect without any problem with his mac to our network and work on the terminal server. Since the upgrade he's not able to get it working in 64 bit (normal) mode.
This our setup
Cisco PIX 515
RSA Cisco Pix security Apliance.
Does anybody have any advice to get this setup working.
regardsHi Raymond,
We have encounter the same issue with one of our sales director, the upgrade to MAC OS-X Lion breaks the VPN IPsec connexion. We have tryed various type of tunning with no sucess.
Finally, as wordaround, we have installed the AnyConnect client and it works fine now.
Vincent -
I'm tryin to rebuild our VPN environment with a pair of 5520. WE're going to use Anyconnect mobility exclusively with SSL. No IPSec and no SSL Webvpn.
We have a large number of contractors using the VPN to access specific internal resources so I would like to use different IP subnets for each contractor assigned through group policy. I don't want to have a different URL for each contractor so I want to assign the group policy through LDAP group memebership. However, primary authentication will be via RSA 2 factor.
How do I get the ASA to check group membership and hense assign the right group when primary authentication is through RSA?
Thanks for any help.yes you can do the Authentication to an RSA server and the Authorization to the LDAP server.
Please configure LDAP as an authorization server.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808d1a7c.shtml
Do let me know how it goes.
~BR
Jatin Katyal
**Do rate helpful posts** -
Using a Cisco VPN on an iPad and incorporating RSA tokens
Hello Cisco community,
I have what seems like a simple question. I have nearly no network experience so I'm hoping someone here can just answer this. I have this iPad project for my internship in which they want to create remote access to their network using a VPN and a soft/hard security token. It would appear they already use RSA hard tokens for their current VPN connections from home. They use laptops at their homes but wish to start using iPads as well. So my question is, can an iPad support a Cisco VPN using a RSA hard token authentication? I just need a concrete answer to give to the management at work, and literally just need to give them somewhere to start. Thank you for taking the time to read my question and answer it.
PhilPhil,
Anyconnect on iphone/ipad/ipod should be able to handle hardtoken auth, but itegration with softoken might be problematic (last time I heard it was not supported at all).
M. -
Cisco ASA 5520 SSL VPN Web Login Customization For RSA Login
I have a Cisco 5520 that I have RSA radius with hardware token up and working witrhout issue. The RSA radius authentication works fine.
My problem is that I want the login page of the WebVPN portal to display two fields for the user RSA passcode. An RSA passcode is the PIN and the current toke code together.
I want one field to accept the PIN from the passcode and the other field to accept the TOKEN CODE from the RSA token.
Currently the login page has in this order:
USERNAME:
PASSCODE:
My end state would be:
USERNAME:
PIN:
TOKENCODE:
I know this has been done with the native Cisco IPSEC client but I cannot find a way to do this with the WebVPN login page. I have been thru the Customization page and can't seem to get this to work correctly.
Thanks.Hello friend!
Please allow me to resurect this old post. Did you have the solution?
Regards! -
Router to PC VPN with device authen only via RSA Sig
Problem establishing a vpn between a cisco router and a PC based Cisco VPN Client
using version 4.6 (had problems with 4.8 & 5.0). Only trying to accomplish
device authenication with digital certificates without any interest in user
authenication/authorization, so I've eliminated the Xauth from IKE and login
stuff from the client config.
I've got to take about half a dozen users into production asap...
I am thinking the access list may be the problem since the pc client is
expecting to have encrypted communications, but the cisco router is
still doing all it's checks and balances with IKE/ISAKMP to finish device
authenication with one certificate on each. Error message seem straight
forward, but I'm new to the vpn config's and have tested pki for
about 6 months wo/ going into production. Attached are logs with recommended
debug turned on for crypto ike/ipsec/pki/etc.Thank you for your response!
After further investigation, I'm more concerned about Cisco's IOS 12.4 "Certificate Server" being able to consistently build certificates. Do I need to depend upon a certain Test release like 12.4T because 12.4 isn't ready ....? It's in the 12.4 documentation as though it's ready and I couldn't find any comments in the caveats...
I have tried to build a "request for a certificate" with both with the Cisco VPN Client 4.8/5.0, and Mozilla's add-on to firefox called Key Manager, but both failed.
Just loading base64 instream directly into the IOS crypto cmd to enroll via the terminal fails regularly, besides trying to use SCEP (Cisco's simple certificate enrollment protocol).
I don't care how it gets done, because I like Cisco's architecture so much, but it's got to be reliable.
I don't mind getting involved with Cisco's testing and I believe I can replicate the errors.
Attached is an error of the IOS 12.4 failing... -
Hello
I can't understand why do I have to attach the trustpoint to the crypto map - like this
ASA(config)# crypto map <MAP> <10> set trustpoint <CA>
I mean on IOS it works fine without this configuration - so if this is a security issue, then we should NOT use the rsa signature authentication on IOS. If it secure without this command, then why it is here and why do i have to use it (without it I was not able to establish IPsec tunnel between 2 ASAs).
So what this command does und why do we need it only on ASA?
ThanksDmytro,
To begin with, the ASA and the Router are two different devices, so you cannot expect the same behavior from both.
On the other hand, please check this out:
crypto map set trustpoint
To specify the trustpoint that identifies the certificate to send for authentication during Phase 1 negotiations for the crypto map entry, use the crypto map set trustpoint command in global configuration mode.
This crypto map command is valid only for initiating a connection..
So it has be in your configuration
HTH.
Portu. -
Setting up site to site vpn with cisco asa 5505
I have a cisco asa 5505 that needs to be set up for site to site vpn to a cisco asa 5500. The 5505 is the remote office and the 5500 is the main office.
IP of remote office router is 71.37.178.142
IP of the main office firewall is 209.117.141.82
Can someone tell me if my config is correct, this is the first time I am setting this up and it can not be tested until I set it up at the remote office. I would rather know its correct before I go.
ciscoasa# show run
: Saved
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password TMACBloMlcBsq1kp encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 host 209.117.141.82
access-list inside_nat0_outbound extended permit ip host 71.37.178.142 host 209.117.141.82
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group5
crypto map outside_map 1 set peer 209.117.141.82
crypto map outside_map 1 set transform-set ESP-AES-256-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn username [email protected] password ********* store-local
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.129 inside
dhcpd enable inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:7e338fb2bf32a9ceb89560b314a5ef6c
: end
ciscoasa#
Thanks!Hi Mandy,
By using following access list define Peer IP as source and destination
access-list outside_1_cryptomap extended permit ip host 71.37.178.142 host 209.117.141.82
you are not defining the interesting traffic / subnets from both ends.
Make some number ACL 101 as you do not have to write the extended keyword then if you like as follows, or else NAME aCL will also work:
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 remark CCP_ACL Category=4 access-list 101 remark IPSEC Rule
!.1..source subnet(called local encryption domain) at your end 192.168.200.0
!..2.and destination subnet(called remote encryption domain)at other end 192.168.100.0 !.3..I mean you have to define what subnets you need to communicate between which are behind these firewalls
!..4...Local Subnets behind IP of the main office firewall is 209.117.141.82 say
!...at your end 192.168.200.0
!..5.Remote Subnets behind IP of remote office router is 71.37.178.142 say
!...at other end 192.168.100.0
Please use Baisc Steps as follows:
A. Configuration in your MAIN office having IP = 209.117.141.82 (follow step 1 to 6)
Step 1.
Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
access-list outside_1_cryptomap extended ip 192.168.200.0 0.0.0.255 192.168.100.0 0.0.0.255
Step 2.
Config ISAKMP Policy with minimum 4 parameters are to be config for
crypto isakmp policy 10
authentication pre-share ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
encryption aes-256 --->2nd parameter of ISAKMP Policy is OK
hash sha ---> 3rd parameter of ISAKMP Policy is OK
group 5 ---> 4th parameter of ISAKMP Policy is OK
lifetime 86400 ------ > this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
Step 3.
Define Preshared key or PKI which you will use with other side Peer address 71.37.178.142, either key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
Here in your case in step 2 Authentication is using PSK, looks you have not defines Password
Use following command:
crypto isakmp key 0 CISCO123 address 71.37.178.142
or , but not both
crypto isakmp key 6 CISCO123 address71.37.178.142
step 4.
Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
Here is yours one:
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
or
crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
ah-sha-hmac or ah-md5-hmac
crypto ipsec transform-set TSET1 ah-sha-hmac
or
crypto ipsec transform-set TSET1 ah-md5-hmac
Step 5.
Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
crypto map ipsec-isakmp
1. Define peer -- called WHO to set tunnel with
2. Define or call WHICH - Transform Set
3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
Like in your case it is but ipsec-isakmp keyword missing in the ;ast
crypto map outside_map 10 ipsec-isakmp
1. set peer 209.117.141.82 -----> is correct as this is your other side peer called WHO in my step
2. set transform-set TSET1 -----> is correct as this is WHICH, and only one transform set can be called
!..In you case it is correct
!...set transform-set ESP-AES-256-SHA (also correct)
3. match address outside_1_cryptomap ---->Name of the extended ACL define as WHAT to pass through this tunnel
4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
Step 6.
Now apply this one crypto MAP to your OUTSIDE interface always
interface outside
crypto map outside_map
Configure the same but just change ACL on other end in step one by reversing source and destination
and also set the peer IP of this router in other end.
So other side config should look as follows:
B. Configuration in oyur Remote PEER IP having IP = 71.37.178.142 (follow step 7 to 12)
Step 7.
Define Crypto ACL/ mirror ACL for other end (change source to destination and destination to source in other side router or VPN device and thats why they are called mirror ACL/ or also called Proxy ID or also called Proxy ACL, your interesting traffic , that you want to encrypt / trave/enter in the tunnel)
access-list outside_1_cryptomap extended ip 192.168.100.0 0.0.0.255 192.168.200.0 0.0.0.255
Step 8.
Config ISAKMP Policy with minimum 4 parameters are to be config for
crypto isakmp policy 10
authentication pre-share ---> Ist parameter of setting Authentication type ISAKMP Policy is OK
encryption aes-256 --->2nd parameter of ISAKMP Policy is OK
hash sha ---> 3rd parameter of ISAKMP Policy is OK
group 5 ---> 4th parameter of ISAKMP Policy is OK
lifetime 86400 ------ > this 5th parameter is optional , and will negotiate for the less value at either end or by default is will be taken 86400
Step 9.
Define Preshared key or PKI which you will use with other side Peer address key type 0 is Plain text anyone can see it over internet, or use key type 6 for encrypted key , say your password is CISCO123
Here in your case in step 8 Authentication is using PSK, looks you have not defines Password
Use following command:
crypto isakmp key 0 CISCO123 address 209.117.141.82
or , but not both
crypto isakmp key 6 CISCO123 address 209.117.141.82
step 10.
Define Transform set , which will be used for phase 2 tunnel parameters, if you use ESP it can have to sets one cor encryption and other for Authentication.
Here is yours one:
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
this is correct but give name somthing easier to remember /distinguish it is a transform set , like TSET1 instead of ESP-AES-256-SHA ,try following (here you are using ESP so for encryption we use first set as esp-des and for authentication we use second set esp-sha-hmac)
crypto ipsec transform-set TSET1 esp-des esp-sha-hmac
or
crypto ipsec transform-set TSET1 esp-aes-256 esp-sha-hmac
Suppose you are using only AH then as AH does not support encryption or confidentiality hence it always use onle one set not 2 sets like ESP(remember the difference) say for example only one set for auth etc but no set for encryption hence AH have no such sets like ah-des or ah-3des or ah-aes, it has only second set for authentication like
ah-sha-hmac or ah-md5-hmac
crypto ipsec transform-set TSET1 ah-sha-hmac
or
crypto ipsec transform-set TSET1 ah-md5-hmac
Step 11.
Now configure Crypto MAP as follows and only one CMPA can be applied to OUTSIDE Interface as VPN tunnel is alsways applied for traffic from inside subnets to outside subnets and only once Cryptomap can be applied to OUTSIDE Interface and hence for several VPN peers from different vendors we use seq no 10, 2 30 for different tunnels in one single CMAP:
crypto map ipsec-isakmp
1. Define peer -- called WHO to set tunnel with
2. Define or call WHICH - Transform Set, only one is permissible
3. Define WHAT to call interesting traffic define in your ACL or Proxy ID or Proxy ACL in step 1 using match address
Like in your case it is but ipsec-isakmp keyword missing in the ;ast
crypto map outside_map 10 ipsec-isakmp
1. set peer 209.117.141.82 -----> is correct as this is your other side peer called WHO in my step
2. set transform-set TSET1 -----> is correct as this is WHICH, and only one transform set can be called
!..In you case it is correct
!...set transform-set ESP-AES-256-SHA (also correct)
3. match address outside_1_cryptomap ---->Name of the extended ACL define as WHAT to pass through this tunnel
4. set pfs group5 (this is optional but if config at one end same has to be config at other side peer as well)
Step 12.
Now apply this one crypto MAP to your OUTSIDE interface always
interface outside
crypto map outside_map
Now initite a ping
Here is for your summary:
IPSec: Site to Site - Routers
Configuration Steps
Phase 1
Step 1: Configure Mirrored ACL/Crypto ACL for Interesting Traffic
Step 2: Configure ISAKMP Policy
Step 3: Configure ISAKMP Key
Phase 2
Step 4: Configure Transform Set
Step 5: Configure Crypto Map
Step 6: Apply Crypto Map to an Interface
To debug for Phase 1 and Phase 2. Store it in buffer without displaying logs on terminal.
Router#debug crpyto isakmp
Router#debug crpyto ipsec
Router(config)# logging buffer 7
Router(config)# logging buffer 99999
Router(config)# logging console 6
Router# clear logging
Configuration
In R1:
(config)# access-list 101 permit ipo host 10.1.1.1 host 10.1.2.1
(config)# crypto isakmp policy 10
(config-policy)# encryption 3des
(config-policy)# authentication pre-share
(config-policy)# group 2
(config-policy)# hash sha1
(config)# crypto isakmp key 0 cisco address 2.2.2.1
(config)# crypto ipsec transform-set TSET esp-3des sha-aes-hmac
(config)# crypto map CMAP 10 ipsec-isakmp
(config-crypto-map)# set peer 2.2.2.1
(config-crypto-map)# match address 101
(config-crypto-map)# set transform-set TSET
(config)# int f0/0
(config-if)# crypto map CMAP
Similarly in R2
Verification Commands
#show crypto isakmp SA
#show crypto ipsec SA
Change to Transport Mode, add the following command in Step 4:
(config-tranform-set)# mode transport
Even after doing this change, the ipsec negotiation will still be done through tunnel mode if pinged from Loopback to Loopback. To overcome this we make changes to ACL.
Change to Aggressive Mode, replace the Step 3 command with these commands in R1:
(config)# crypto isakmp peer address 2.2.2.1
(config-peer)# set aggressive-mode password cisco
(config-peer)# set aggressive-mode clien-endpoint ipv4-address 2.2.2.1
Similarly on R2.
The below process is for the negotiation using RSA-SIG (PKI) as authentication type
Debug Process:
After we debug, we can see the negotiation between the two peers. The first packet of the interesting traffic triggers the ISAKMP (Phase1) negotiation. Important messages are marked in BOLD and explanation in RED
R2(config)#do ping 10.1.1.1 so lo0 // Interesting Traffic
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 2.2.2.2
Mar 2 16:18:42.939: ISAKMP:(0): SA request profile is (NULL) // Router tried to find any IPSec SA matching the outgoing connection but no valid SA has been found in Security Association Database (SADB)
Mar 2 16:18:42.939: ISAKMP: Created a peer struct for 20.1.1.10, peer port 500
Mar 2 16:18:42.939: ISAKMP: New peer created peer = 0x46519678 peer_handle = 0x8000000D
Mar 2 16:18:42.939: ISAKMP: Locking peer struct 0x46519678, refcount 1 for isakmp_initiator
Mar 2 16:18:42.939: ISAKMP: local port 500, remote port 500
Mar 2 16:18:42.939: ISAKMP: set new node 0 to QM_IDLE
Mar 2 16:18:42.939: ISAKMP:(0):insert sa successfully sa = 4542B818
Mar 2 16:18:42.939: ISAKMP:(0):Can not start Aggressive mode, trying Main mode. // Not an error. By default it is configured for Main Mode
Mar 2 16:18:42.939: ISAKMP:(0):No pre-shared key with 20.1.1.10! // Since we are using RSA Signature, this message. If we use pre-share, this is where it would indicate so!
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-rfc3947 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-07 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-03 ID
Mar 2 16:18:42.939: ISAKMP:(0): constructed NAT-T vendor-02 ID
Mar 2 16:18:42.939: ISAKMP:(0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
Mar 2 16:18:42.939: ISAKMP:(0):Old State = IKE_READY New State = IKE_I_MM1
Mar 2 16:18:42.943: ISAKMP:(0): beginning Main Mode exchange
Mar 2 16:18:42.943: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_NO_STATE // Sending ISAKMP Policy to peer
Mar 2 16:18:42.943: ISAKMP:(0):Sending an IKE IPv4 Packet.
Mar 2 16:18:42.943: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_NO_STATE // Sending ISAKMP Policy to peer
Mar 2 16:18:42.947: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:42.947: ISAKMP:(0):Old State = IKE_I_MM1 New State = IKE_I_MM2
Mar 2 16:18:42.947: ISAKMP:(0): processing SA payload. message ID = 0
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch // Do not worry about this! Not an ERROR!
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
Mar 2 16:18:42.947:.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms
R2(config)# ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): processing IKE frag vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0):Support for IKE Fragmentation not enabled
Mar 2 16:18:42.947: ISAKMP : Scanning profiles for xauth ...
Mar 2 16:18:42.947: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
Mar 2 16:18:42.947: ISAKMP: encryption 3DES-CBC
Mar 2 16:18:42.947: ISAKMP: hash SHA
Mar 2 16:18:42.947: ISAKMP: default group 2
Mar 2 16:18:42.947: ISAKMP: auth RSA sig
Mar 2 16:18:42.947: ISAKMP: life type in seconds
Mar 2 16:18:42.947: ISAKMP: life duration (VPI) of 0x0 0x1 0x51 0x80
Mar 2 16:18:42.947: ISAKMP:(0):atts are acceptable. Next payload is 0
Mar 2 16:18:42.947: ISAKMP:(0):Acceptable atts:actual life: 0
Mar 2 16:18:42.947: ISAKMP:(0):Acceptable atts:life: 0
Mar 2 16:18:42.947: ISAKMP:(0):Fill atts in sa vpi_length:4
Mar 2 16:18:42.947: ISAKMP:(0):Fill atts in sa life_in_seconds:86400
Mar 2 16:18:42.947: ISAKMP:(0):Returning Actual lifetime: 86400
Mar 2 16:18:42.947: ISAKMP:(0)::Started lifetime timer: 86400.
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
Mar 2 16:18:42.947: ISAKMP:(0): vendor ID is NAT-T v2
Mar 2 16:18:42.947: ISAKMP:(0): processing vendor id payload
Mar 2 16:18:42.951: ISAKMP:(0): processing IKE frag vendor id payload
Mar 2 16:18:42.951: ISAKMP:(0):Support for IKE Fragmentation not enabled
Mar 2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM2
Mar 2 16:18:42.951: ISAKMP (0): constructing CERT_REQ for issuer cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
Mar 2 16:18:42.951: ISAKMP:(0): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_SA_SETUP // Sending Key Exchange Information to peer
Mar 2 16:18:42.951: ISAKMP:(0):Sending an IKE IPv4 Packet.
Mar 2 16:18:42.951: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:42.951: ISAKMP:(0):Old State = IKE_I_MM2 New State = IKE_I_MM3
Mar 2 16:18:42.955: ISAKMP (0): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_SA_SETUP // Receive key exchange information from peer
Mar 2 16:18:42.955: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:42.955: ISAKMP:(0):Old State = IKE_I_MM3 New State = IKE_I_MM4
Mar 2 16:18:42.959: ISAKMP:(0): processing KE payload. message ID = 0
Mar 2 16:18:43.003: ISAKMP:(0): processing NONCE payload. message ID = 0
Mar 2 16:18:43.007: ISAKMP:(1008): processing CERT_REQ payload. message ID = 0
Mar 2 16:18:43.007: ISAKMP:(1008): peer wants a CT_X509_SIGNATURE cert
Mar 2 16:18:43.007: ISAKMP:(1008): peer wants cert issued by cn=ca_server OU=cisco C=India S=Karnataka L=Bangalore
Mar 2 16:18:43.007: Choosing trustpoint CA_Server as issuer
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID is Unity
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID seems Unity/DPD but major 180 mismatch
Mar 2 16:18:43.007: ISAKMP:(1008): vendor ID is XAUTH
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008): speaking to another IOS box!
Mar 2 16:18:43.007: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.007: ISAKMP:(1008):vendor ID seems Unity/DPD but hash mismatch
Mar 2 16:18:43.007: ISAKMP:received payload type 20
Mar 2 16:18:43.007: ISAKMP (1008): His hash no match - this node outside NAT
Mar 2 16:18:43.007: ISAKMP:received payload type 20
Mar 2 16:18:43.007: ISAKMP (1008): No NAT Found for self or peer
Mar 2 16:18:43.007: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:43.007: ISAKMP:(1008):Old State = IKE_I_MM4 New State = IKE_I_MM4
Mar 2 16:18:43.011: ISAKMP:(1008):Send initial contact
Mar 2 16:18:43.011: ISAKMP:(1008):My ID configured as IPv4 Addr, but Addr not in Cert!
Mar 2 16:18:43.011: ISAKMP:(1008):Using FQDN as My ID
Mar 2 16:18:43.011: ISAKMP:(1008):SA is doing RSA signature authentication using id type ID_FQDN
Mar 2 16:18:43.011: ISAKMP (1008): ID payload
next-payload : 6
type : 2
FQDN name : R2
protocol : 17
port : 500
length : 10
Mar 2 16:18:43.011: ISAKMP:(1008):Total payload length: 10
Mar 2 16:18:43.019: ISAKMP (1008): constructing CERT payload for hostname=R2+serialNumber=FHK1502F2H8
Mar 2 16:18:43.019: ISAKMP:(1008): using the CA_Server trustpoint's keypair to sign
Mar 2 16:18:43.035: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) MM_KEY_EXCH
Mar 2 16:18:43.035: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.035: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:43.035: ISAKMP:(1008):Old State = IKE_I_MM4 New State = IKE_I_MM5
Mar 2 16:18:43.047: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) MM_KEY_EXCH
// "MM_KEY_EXCH" indicates that the peers have exchanged DH Public keys and generated a shared secret!
Mar 2 16:18:43.047: ISAKMP:(1008): processing ID payload. message ID = 0
Mar 2 16:18:43.047: ISAKMP (1008): ID payload
next-payload : 6
type : 2
FQDN name : ASA1
protocol : 0
port : 0
length : 12
Mar 2 16:18:43.047: ISAKMP:(0):: peer matches *none* of the profiles // Normal Message! Not an error!
Mar 2 16:18:43.047: ISAKMP:(1008): processing CERT payload. message ID = 0
Mar 2 16:18:43.047: ISAKMP:(1008): processing a CT_X509_SIGNATURE cert
Mar 2 16:18:43.051: ISAKMP:(1008): peer's pubkey isn't cached
Mar 2 16:18:43.059: ISAKMP:(1008): Unable to get DN from certificate!
Mar 2 16:18:43.059: ISAKMP:(1008): Cert presented by peer contains no OU field.
Mar 2 16:18:43.059: ISAKMP:(0):: peer matches *none* of the profiles
Mar 2 16:18:43.063: ISAKMP:(1008): processing SIG payload. message ID = 0
Mar 2 16:18:43.067: ISAKMP:received payload type 17
Mar 2 16:18:43.067: ISAKMP:(1008): processing vendor id payload
Mar 2 16:18:43.067: ISAKMP:(1008): vendor ID is DPD
Mar 2 16:18:43.067: ISAKMP:(1008):SA authentication status:
authenticated
Mar 2 16:18:43.067: ISAKMP:(1008):SA has been authenticated with 20.1.1.10
Mar 2 16:18:43.067: ISAKMP: Trying to insert a peer 40.1.1.1/20.1.1.10/500/, and inserted successfully 46519678. // SA inserted into SADB
Mar 2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Mar 2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM5 New State = IKE_I_MM6
Mar 2 16:18:43.067: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Mar 2 16:18:43.067: ISAKMP:(1008):Old State = IKE_I_MM6 New State = IKE_I_MM6
Mar 2 16:18:43.071: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Mar 2 16:18:43.071: ISAKMP:(1008):Old State = IKE_I_MM6 New State = IKE_P1_COMPLETE
Mar 2 16:18:43.071: ISAKMP:(1008):beginning Quick Mode exchange, M-ID of -1523793378
Mar 2 16:18:43.071: ISAKMP:(1008):QM Initiator gets spi
Mar 2 16:18:43.075: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE
Mar 2 16:18:43.075: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.075: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_INTERNAL, IKE_INIT_QM
Mar 2 16:18:43.075: ISAKMP:(1008):Old State = IKE_QM_READY New State = IKE_QM_I_QM1
Mar 2 16:18:43.075: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
Mar 2 16:18:43.075: ISAKMP:(1008):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
Mar 2 16:18:43.079: ISAKMP (1008): received packet from 20.1.1.10 dport 500 sport 500 Global (I) QM_IDLE // IPSec Policies
Mar 2 16:18:43.079: ISAKMP:(1008): processing HASH payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing SA payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008):Checking IPSec proposal 1
Mar 2 16:18:43.079: ISAKMP: transform 1, ESP_3DES
Mar 2 16:18:43.079: ISAKMP: attributes in transform:
Mar 2 16:18:43.079: ISAKMP: SA life type in seconds
Mar 2 16:18:43.079: ISAKMP: SA life duration (basic) of 3600
Mar 2 16:18:43.079: ISAKMP: SA life type in kilobytes
Mar 2 16:18:43.079: ISAKMP: SA life duration (VPI) of 0x0 0x46 0x50 0x0
Mar 2 16:18:43.079: ISAKMP: encaps is 1 (Tunnel)
Mar 2 16:18:43.079: ISAKMP: authenticator is HMAC-SHA
Mar 2 16:18:43.079: ISAKMP:(1008):atts are acceptable. // IPSec attributes are acceptable!
Mar 2 16:18:43.079: ISAKMP:(1008): processing NONCE payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
Mar 2 16:18:43.079: ISAKMP:(1008): processing ID payload. message ID = -1523793378
Mar 2 16:18:43.083: ISAKMP:(1008): Creating IPSec SAs
Mar 2 16:18:43.083: inbound SA from 20.1.1.10 to 40.1.1.1 (f/i) 0/ 0
(proxy 1.1.1.1 to 2.2.2.2)
Mar 2 16:18:43.083: has spi 0xA9A66D46 and conn_id 0
Mar 2 16:18:43.083: lifetime of 3600 seconds
Mar 2 16:18:43.083: lifetime of 4608000 kilobytes
Mar 2 16:18:43.083: outbound SA from 40.1.1.1 to 20.1.1.10 (f/i) 0/0
(proxy 2.2.2.2 to 1.1.1.1)
Mar 2 16:18:43.083: has spi 0x2B367FB4 and conn_id 0
Mar 2 16:18:43.083: lifetime of 3600 seconds
Mar 2 16:18:43.083: lifetime of 4608000 kilobytes
Mar 2 16:18:43.083: ISAKMP:(1008): sending packet to 20.1.1.10 my_port 500 peer_port 500 (I) QM_IDLE
Mar 2 16:18:43.083: ISAKMP:(1008):Sending an IKE IPv4 Packet.
Mar 2 16:18:43.083: ISAKMP:(1008):deleting node -1523793378 error FALSE reason "No Error"
Mar 2 16:18:43.083: ISAKMP:(1008):Node -1523793378, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
Mar 2 16:18:43.083: ISAKMP:(1008):Old State = IKE_QM_I_QM1 New State = IKE_QM_PHASE2_COMPLETE // At this point tunnels are up and ready to pass traffic!
Verification Commands
#show crypto isakmp SA
#show crypto ipsec SA
Kindly rate if you find the explanation useful !!
Best Regards
Sachin Garg
Maybe you are looking for
-
Is Adobe Photoshop CS compatible with Snow Leopard?
Which Adobe Photoshop is compantible with Snow Leopard? I have MacBookPro 10.5.8 and I upgraded the memory to 4 GB. If I go to 10.6.8 with Snow Leopard, what version of Adobe Photoshop would I need to have? Thanks
-
Credit card information auto populate on "Payments cards screen"
Hi Everybody, I have requirement where in for some specific order types i need to auto populate Dummy credit card details in sales order "Payment cards" screen.i was searching lot of exists and i found that Xfplt is the structure i need to update,But
-
Installed two 2GB RAM cards to my Mac. Plugged it in, turned it on. You can hear it running. My keyboard isn't lighting up (Caps Lock) and the screen is black.
-
To Apple: SERIOUS FLAW: Same Pix Download for each Sync of Anything
Even though I synced my iPhoto Library, when I told the system to do another sync (to get rid of some Movies I deleted), it starting downloading the SAME IPHOTO pictures that were already on the computer. I stopped it. This is crazy. That would mean
-
Programmatically select a sketcher at runtime
Hi !! We have two editor named MDL editor and ISIS editor installed in the system. Actually, I have to open the editor programatically. We have developed a eclipse plug-in for that and that is working fine. The issue is when I selected the ISIS edito