RSAR_TRFC_DATA_RECEIVED in BW
Hello Xperts
I was trying to load delta records from one ods to the other but got the error
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template: GP3V3KRUVT5T42M70OSNDYUTGUV
Error code: RSAR_TRFC_DATA_RECEIVED
Row: 1,476
Message: The data object "P_S_COMM" has no component called
Procedure
Correct the template to remove the problem
When I checked the SMQS tcode I am getting the scheduler status inactive for BQ1, BP1 and P01 (R/3 production)
I am doing this activity in quality system of BW.
Please let me know how can the problem be rectified.
Regards
Rohit
Hi
check with the following links
Data load error
Re: Program error RSAR245
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/scheduling-in-error-891749
Data load error
Thanks
Reddy
Similar Messages
-
RSAR_TRFC_DATA_RECEIVED Function module does not exist or EXCEPTION raised
Dear All,
We have 2 production systems one is a APO server & the other being BW server.
While checking in SM58 of our APO production server we found that so many entries were in error saying "ERROR REQU_<number> PG# 12 In BW" with target system as BWCLNT<CLIENT NO>.
We checked in both the production systems for any job failure w.r.t same time span but could find nothing.
When we tried to solve this by using F6 option to re-execute the LUW it says "Functional Module doesnot exists or Exception Raised". After doing checks it was found out that the Functional Module (RSAR_TRFC_DATA_RECEIVED) was existing . So we need to know about how we can solve this EXCEPTION RAISED issue.
Thanks & Regards,
SAPAPO
Edited by: SAP-APO on Dec 30, 2009 8:38 AMHi,
This migth be problem with not catching exact exception in the code.There might be data you are passing which not getting caught by the exception.
If you are using any code add this FM in the code or else try to debug where exactly u r facing this problem.
Regards,
Shiva Kumar G.C -
Error while loading data through s614
Hi
When I am trying to load data from structure s614..I am getting the Below error..
I have gone through Transact.RFC..there i found that for ALEREMOTE..function module 'RSAR_TRFC_DATA_RECEIVED'..time limit exceeded..
and also found that job was finished in the source system..
Can any one give some suggestion for this...and also i have a doubt..my client is having table s614 and structure 2lis_01_s614..do i need to run set up to extract data from this table..if it is so,how should i approach......
Thanks
Teja
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.Hi,
I have a similary problem.
Have you help me?? -
Hi Guys,
I am facing an error while activating the data in the ODS.
The data is loading perfectly fine but when activating the ODS data the following error is coming
<b>Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
System error occurred (RFC call)
No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )</b>
This is happening after we had a BWQ refresh .
I thought this has something to do with the BASIS guys but they say they checked everything.
Need HelpHi Sidhu,
There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
I checked the RESREQDONE table but I dont see these requests in there.
I checked the SM58 there I saw a lot of errors
<u><b>ALEREMOTE RSAR_TRFC_DATA_RECEIVED BWQCLNT641 10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW</b></u>
one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
Regards
Majeed -
PERFORM_PARAMETER_MISSING - continual short dump in BW
Hi All,
I am facing one strange issue.
Few days back there was a failure in delta load of CUSTOMER_TEXT. The load was corrected, but since then every 45 minutes or so I am getting a short dump in the system.
There is no active job in BW or R/3, but it seems there is something triggered in infinite loop, which gives the 2 entries in SM58 and a short dump in every few minutes.
SM58: -
Missing parameter with PERFORM.
ST22: -
Runtime Errors PERFORM_PARAMETER_MISSING
Exception CX_SY_DYN_CALL_PARAM_MISSING
Termination occurred in the ABAP program "SAPLRSAI" - in
"RSAR_TRFC_DATA_RECEIVED".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 247
of the (Include) program "LRSAIU06".
The termination is caused because exception "CX_SY_DYN_CALL_PARAM_MISSING"
occurred in
procedure "RSAR_TRFC_DATA_RECEIVED" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
I have no idea how to stop this dump. Can somebody throw some light on this?
Thanks,
ManishaHi Manisha,
I think this is happening because the backgroud job in the source system was not ended.
This is happening because on the day that you deleted the Delta request you have failed to stop the bacground job in the source system.
Just login in the source system SM37 -> Job name as BI* give the date selection and check if there is any active BI job that is available.
If available select and delete it or stop it.This will solve the issue
Prathish -
BW..No more storage space available for extending an internal Table
Hi;
In function module - RSAR_TRFC_DATA_RECEIVED
During Data loading from ERP to BW client am getting an error in SM58 in ERP as ""No more storage space available for extending an internal Table "".
There is a dump in BW system TSV_TNEW_PAGE_ALLOC_FAILED
"".I checked all the parameters for roll area,paging , etc..everything is fine. Also tried with packet size smaller ..still i am getting this error ..
Thanks & regards
seethyhi thanks for the response....
Memory parameters are fine
em/initial_size_MB 2048 EM/TOTAL_SIZE_MB 21679 em/global_area_MB 256 Ztta/roll_area 6500000
ztta/roll_first 1
ztta/roll_extension 2000000000
rdisp/ROLL_MAXFS 32768
rdisp/PG_MAXFS 32768
rdisp/ROLL_SHM 16384
rdisp/PG_SHM 16384
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
abap/heap_area_total 4000000000
i have checked with Less data selection. still error occurs
regards
seethy -
Hi
I see in SM58 in the R/3 production system that we have some old entries (target is BW) like:
RSAR_TRFC_DATA_RECEIVED 23.12.2007 03:38:44 partner not reached (host xxx, service sapgw04)
IDOC_INBOUND_ASYNCHRONOUS 23.12.2007 03:38:44 partner not reached (host xxx, service s
The main part is RSAR_TRFC_DATA_RECEIVED entries - we have only a couple of IDOC_INBOUND_ASYNCHRONOUS entries.
We have got all loads from this given day and the following days into the BW system. Some loads failed, but they where repeated and thereby loaded successfully the second time.
A)
It is then safe to delete these entries or should they be repeated?
B)
What happens if they are repeated (the loads for the given day and the following days are successfully)?
C)
Is there anything that I should be aware of regarding my SM58 cleanup?
Thanks in advance.
Kind regards,
TorbenHi Aadil
Thanks for your reply and explanation.
Just want to make sure:
I can delete because it is old entries. In case it was never entries where we had load which was not loaded successfully yet I could not delete (if I did - I would lose data).
Just a follow-up question.
Will new delta data be present in a new LUW? Lets say that the latest delta load for a given area where loaded successfully this morning 09.00.00, would a new LUW have been created containing data from 09.00.01? In case this is correct, then should I would lose data by delete this new LUW.
Once again, thanks.
Kind regards,
Torben
PS. Do you have any links where I can read about LUW, tRFC and so on - this is a area which I do not know anything about and which I would like to know more about. -
PROCESS_BCI_ERROR
Dear all,
we are extracting Data from R/3 which is a Delta Update only into PSA.The job finished in the R/3,but a shortdump has occured in BW with following error message.
Exception condition "PROCESS_BCI_ERROR" raised.
Please suggest suitable solutions
Thanks in advance,
RaviDinesh,
There are no inbound idocs in queue on BW side.one more thing we have seen in the Transactional RFC( sm58 ) there is a following entry.
Caller BWALE
Functionmodule RSAR_TRFC_DATA_RECEIVED
Targetsystem BP1CLNT400
Date 23.08.2005
Time 03:19:23
StatusText Transaction Recorded.
when we tried to see function module RSAR_TRFC_DATA_RECEIVED,it is not found.
Please give a suitable suggestion.
Regards
Ravi. -
Hi forum,
My process chain crashed this night.
When I look in my transactional RFC I see this rfc:
Caller ALEREMOTE
Function Module RSAR_TRFC_DATA_RECEIVED
Target System BWPCLNT020
Date 28.01.2011
Time 02:54:59
Status Text 挀漀渀渀攀挀琀椀漀渀 挀氀漀猀攀搀 ⠀渀漀 搀愀琀愀
Strange.
Could you help me to find how to solve this error ?
Thank you,
Philippedid you install chinese language in your system?
-
Infopackage - load to ODS - status yellow !
Hi everybody,
I am on BI 7.0 and i use Architecture 3.5.
When i transfer data (36000 records about) from a data table to ODS, i obtain for the 2 last days
a problem of loading -
> Status is always yellow.
As concerns TRFC, In transaction sm58, i obtain the following error:
RFC: RSAR_TRFC_DATA_RECEIVED
Status: Conversion Error
I have different behaviours following configuration of my InfoPackage when Incorrect Data Records Occur:
- Valid Records update, reporting possible -
> Status Yellow
- Valid records update, no reporting -
> Status Red (few records are wrong)
Have you any ideas ?
Thanks a lot,
Rodolphe.Hi,
If your data packets are getting into BW, then check your transfer and update rules, for any routines where the data is getting stuck.
If there are warnings, in the infopackage there is an option for treatment of warnings. Select the radio button as green and then reload the data.
Also suggest you keep an eye on SM50/51/66 to check what's happening with the data load.
Check the size of the data packets. If possible reduce the data size of the packets and see if that helps.
Cheers,
Kedar
Maybe you are looking for
-
In the calendar side bar, the groups titled "On my Mac" and "iCloud" will not merge?
I recently updated my Macbook to Mavericks and my phone is already updated to IOS7. In iCal, there is a side bar, and there are 3 groups... "On my Mac" "iCloud" "US Holidays" Since all my main events are in the group "On my Mac" they do not sync with
-
.PS file generating a blank PDF after upgrade from Acrobat Pro 7 to 9
Hi All, I've searched for this in vain so I'm comming to you now in desperation. My boss has tasked me with tracking down this error and I have to be honest, I'm a little bit green with Acrobat Pro. So coming into the situation I know this. My depart
-
Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William
-
Using two external USB drives in RAID 1?
Is this acceptable? I initially set it up, copied files over only to see one slice degraded. Now I've been trying to rebuild the RAID but it's taking 40 +hours. Seems it would be easier/less time consuming to delete, recreate the RAID and recopy the
-
Eclipse Mars: Forgets libraries, and can not add
When I started Eclipse (Mars) I got error messages that code that worked before is not working any more. On inspection I found out the required libraries where lost for Eclipse. I removed the libraries in Eclipse: Windows -> Java -> Build Path -> Use