RSBBS restriction with VA03 and VA43
Hi Experts,
I implemented through RSBBS a jump from a Bex query to R/3 documents for VA03 and VA43 transactions.
Do you know how can I restrict VA03 to visualize only sales documents and not contracts documents. Because, when I want to use the GoTo to VA03, I can GoTo on both sales and contracts documents.
Thank you for your answers.
Hi,
Thank you for your answer, but the users have rights in R/3 to access VA03 and VA43.
My problem is that when I use GoTo to VA03, I can open contracts as well (and the transaction to acces to contract document is VA43). How can I parameter the RRI link to restrict the access of VA03 only to Sales documents, and not contracts ?
Thnak you in advance for your answer
Similar Messages
-
How to restrict the quantity & rate of MIRO with MIGO and PO
Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh SharmaHi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B -
I am using Sansung Galaxy S III with Verizon and when i am calling out to somebody they recieving my call as RESTRICTED CALL...
Let me know, please, how can I change settings in my phone to clear option of restricted out going calls...
Thank's a lotHi there Altercc!
We definitely want others to know when you're calling them. This could be fixed two ways.
First we have an option called Share Name ID available via vzw.com: http://bit.ly/SsGi9e
We also have the opportunity to Block your Caller ID from displaying. This is a feature we can easily remove if it's active.
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
i created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the device is password enabled, Please somebody helpme
If you are talking about the passcode that gains access to the iPad - you will have to restore your iPad in order to unlock it. You will want to use the last computer that you synced with so that you can recover all of your app data, settings, etc. this explains how to restore the iPad. At the end of the process restore from your backup as described.
http://support.apple.com/kb/HT1414
If iTunes will not let you restore that way, you may need to use recovery mode to restore, and you can read about that process here.
http://support.apple.com/kb/ht4097
IF - you are talking about a restrictions pass code that you put on the device to restrict content or downloading apps or something like that - you do not want to restore from the backup - because that backup will contain the passcode that you cannot remember and you will end up where you started. -
Please help me get my paid songs back. (I restored my iPad and backed up with iCloud and nothing happened. After that I looked at my music and nothing was there, I had six songs)
iTunes, iTunes Store, far right side, look for Purchased.
Your music is there -
Index issue with or and between when we set one partition index to unusable
Need to understand why optimizer unable to use index in case of "OR" whenn we set one partition index to unusable, the same query with between uses index.
“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
1. Created local index on partitioned table
2. ndex partition t_dec_2009 set to unusable
-- Partitioned local Index behavior with “OR” and with “BETWEEN”
SQL> CREATE TABLE t (
2 id NUMBER NOT NULL,
3 d DATE NOT NULL,
4 n NUMBER NOT NULL,
5 pad VARCHAR2(4000) NOT NULL
6 )
7 PARTITION BY RANGE (d) (
8 PARTITION t_jan_2009 VALUES LESS THAN (to_date('2009-02-01','yyyy-mm-dd')),
9 PARTITION t_feb_2009 VALUES LESS THAN (to_date('2009-03-01','yyyy-mm-dd')),
10 PARTITION t_mar_2009 VALUES LESS THAN (to_date('2009-04-01','yyyy-mm-dd')),
11 PARTITION t_apr_2009 VALUES LESS THAN (to_date('2009-05-01','yyyy-mm-dd')),
12 PARTITION t_may_2009 VALUES LESS THAN (to_date('2009-06-01','yyyy-mm-dd')),
13 PARTITION t_jun_2009 VALUES LESS THAN (to_date('2009-07-01','yyyy-mm-dd')),
14 PARTITION t_jul_2009 VALUES LESS THAN (to_date('2009-08-01','yyyy-mm-dd')),
15 PARTITION t_aug_2009 VALUES LESS THAN (to_date('2009-09-01','yyyy-mm-dd')),
16 PARTITION t_sep_2009 VALUES LESS THAN (to_date('2009-10-01','yyyy-mm-dd')),
17 PARTITION t_oct_2009 VALUES LESS THAN (to_date('2009-11-01','yyyy-mm-dd')),
18 PARTITION t_nov_2009 VALUES LESS THAN (to_date('2009-12-01','yyyy-mm-dd')),
19 PARTITION t_dec_2009 VALUES LESS THAN (to_date('2010-01-01','yyyy-mm-dd'))
20 );
SQL> INSERT INTO t
2 SELECT rownum, to_date('2009-01-01','yyyy-mm-dd')+rownum/274, mod(rownum,11), rpad('*',100,'*')
3 FROM dual
4 CONNECT BY level <= 100000;
SQL> CREATE INDEX i ON t (d) LOCAL;
SQL> execute dbms_stats.gather_table_stats(user,'T')
-- Mark partition t_dec_2009 to unusable:
SQL> ALTER INDEX i MODIFY PARTITION t_dec_2009 UNUSABLE;
--- Let’s check whether the usable index partition can be used to apply a restriction: BETWEEN
SQL> SELECT count(d)
FROM t
WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation | Name | Pstart| Pstop |
| 0 | SELECT STATEMENT | | | |
| 1 | SORT AGGREGATE | | | |
| 2 | PARTITION RANGE SINGLE| | 12 | 12 |
| 3 | INDEX RANGE SCAN | I | 12 | 12 |
--- Let’s check whether the usable index partition can be used to apply a restriction: OR
SQL> SELECT count(d)
FROM t
WHERE
(d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'))
or
(d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'))
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation | Name | Pstart| Pstop |
| 0 | SELECT STATEMENT | | | |
| 1 | SORT AGGREGATE | | | |
| 2 | PARTITION RANGE OR| |KEY(OR)|KEY(OR)|
| 3 | TABLE ACCESS FULL| T |KEY(OR)|KEY(OR)|
----------------------------------------------------“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
Regards,
Sachin B.Hi,
What is your database version????
I ran the same test and optimizer was able to pick the index for both the queries.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL> set autotrace traceonly exp
SQL>
SQL>
SQL> SELECT count(d)
2 FROM t
3 WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
4 AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
Execution Plan
Plan hash value: 2381380216
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 8 | 25 (0)| 00:00:01 | | |
| 1 | SORT AGGREGATE | | 1 | 8 | | | | |
| 2 | PARTITION RANGE ITERATOR| | 8520 | 68160 | 25 (0)| 00:00:01 | 1 | 2 |
|* 3 | INDEX RANGE SCAN | I | 8520 | 68160 | 25 (0)| 00:00:01 | 1 | 2 |
Predicate Information (identified by operation id):
3 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss'))
SQL> SELECT count(d)
2 FROM t
3 WHERE
4 (
5 (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'
6 or
7 (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'
8 );
Execution Plan
Plan hash value: 3795917108
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 8 | 4 (0)| 00:00:01 | | |
| 1 | SORT AGGREGATE | | 1 | 8 | | | | |
| 2 | CONCATENATION | | | | | | | |
| 3 | PARTITION RANGE SINGLE| | 13 | 104 | 2 (0)| 00:00:01 | 2 | 2 |
|* 4 | INDEX RANGE SCAN | I | 13 | 104 | 2 (0)| 00:00:01 | 2 | 2 |
| 5 | PARTITION RANGE SINGLE| | 13 | 104 | 2 (0)| 00:00:01 | 1 | 1 |
|* 6 | INDEX RANGE SCAN | I | 13 | 104 | 2 (0)| 00:00:01 | 1 | 1 |
Predicate Information (identified by operation id):
4 - access("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss'))
6 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-01-01 23:59:59', 'syyyy-mm-dd hh24:mi:ss'))
filter(LNNVL("D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
LNNVL("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss')))
SQL> set autotrace off
SQL>Asif Momen
http://momendba.blogspot.com -
An issue with authentication and authorization on ISE 1.2
Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
endYes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.
-
Problem with dg4msql and table-valued functions
Have configured dg4msql to connect from my oracle db to ms sql server.
Am able to do simple SELECTs from ms sql tables like:
select * from "sys"."procedures"@dg4msql;
or
select * from "dbo"."SomeTable"@dg4msql;
But am unable to do a SELECT from a table-valued function:
select * from "dbo"."GetData"@dg4msql('param1value');
or
select * from "dbo"."GetData"('param1value')@dg4msql;
In both cases I get:
ORA-00933: SQL command not properly ended
It does not like the parameters portion of the query ("('param1value')")
initdg4msql.ora:
HS_FDS_CONNECT_INFO=[svr1]//mydb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_PROC_IS_FUNCT=TRUE
HS_FDS_RESULTSET_SUPPORT=TRUE
Have tried the other set of params:
HS_FDS_PROC_IS_FUNCT=FALSE
HS_FDS_RESULTSET_SUPPORT=TRUE
Same story. After changing the init*** file have bounced both Listeners (DB and Gateway), reconnected, and re-run the query.
Have I missed something?
Any help is greatly appreciated!Sorry, but for me it looks you did not get the problem.
Oracle® Database Gateway for SQL Server User's Guide,:
11g Release 2 (11.2)
Part Number E12069-02
*2 SQL Server Gateway Features and Restriction*
Result Sets and Stored Procedures
The Oracle Database Gateway for SQL Server provides support for stored procedures which return result sets.
By default, all stored procedures and functions do not return a result set to the user. To enable result sets, set the HS_FDS_RESULTSET_SUPPORT parameter value to TRUE.
PL/SQL Program Fetching from Result Sets in Sequential Mode
-- Execute procedure
out_arg := null;
refcurproc@MSQL('Hello World', out_arg, rc1);
Somewhere in this forum I've seen a message that the syntax "SELECT ... FROM sp@db(param1, param2)" works.
Anyway, even with the PL/SQL block the error message is the same - ORA-00933 "SQL command not properly ended"
and the cursor (* in SQL*PLUS) is put just at the first bracket.
Edited by: user636213 on Aug 10, 2012 5:17 AM -
Issue in generating Invoice with standard and service material
There is one scenario where along with standard material (i.e Tube bending machine) they charge the customer for the Design and Development of a machine (which is a service). Is it possible to make a standard order with the standard material(with excise and cst/vat) and service material (with service tax only) in one single order?
I have tried with both the material in a single order but while making invoice system is taking only the standard material as in item category we have mentioned Billing relevance from delivery document. And service material will not have the delivery.
I would be thankful if you could spare some time and check the exact problem.Hello,
Yes.. this is a common problem when you use Delivery relevent material and service material in the same order. Why don't you use the service material in differnt order and invoice it? or do you have any restriction like the delivery relevent material and the service material should be billed in one invoice?
Prase -
How can I set my privacy tighter with Siri and Dictation?
OK First of all, Apple needs to stop with the restriction of what you can say in posts. They keep deleting my stuff without allowing my QUESTION to be answered.
First of all, when did this massive invasion of my privacy happen? Did it happen with the latest update to iOS 8.1? I know I did not have these pop ups until this update happened this week.
I would like to know how to use Siri and Dictation WITHOUT such a massive invasion of my privacy?
Did I ever have such privacy prior to iOS 8.1?
I went to dictate a text message to my husband today and I get a pop up telling me that ALL my information is going to be shared. There is a "learn more" link and I click that and it has this long diatribe on how
Apple takes the things I say and dictate and records them and sent to them to process my requests. My device will also send Apple other information, such as my name and nickname; the names, nicknames, and relationship with me (e.g. "my dad") of my address book contacts, song names in my collection, and HomeKit-enabled devices in my home (e.g., "living room lights") (collectively, your "User Data"). All of this data is used to help Siri and Dictation understand me better and recognize what I say. It is not linked to other data that Apple may have from my use of other Apple services...
there is a lot more but suffice it to say, it does NOT 'match' what is said about Siri and Dictation on the Apple privacy page. The phone privacy contract description has MORE things listed that are being recorded, used and stored.It only matches what I quoted. There is a lot more in the phone.
I also had a lot more in my original post but Apple censored and then deleted it because they decided it was a rant.
Apple's policy in my phone's privacy policy says a lot more.
Apparently from your answer I am stuck with a massive invasion of my privacy? Are you so very comfortable with having everything you say recorded? What if you worked in a high security industry?
I also asked if this was in effect prior to this latest update or not.
What I had to omit. Check your phone's privacy page and compare to apple's web page I linked ( Settings > General > Keyboard >Dictation & Settings > General > Siri) and click on the About Siri or Dictation privacy...
It goes on to tell me I can restrict Siri's and Dictation's ability completely by turning it off.
It tells me that my personal information, voice recording and other things collected may be retained for a period of time to generally improve Siri, Dictation an functionality in other Apple products and services. <-- this right here contradicts the paragraph I quoted by saying it indeed DOES use it for other Apple things. Also, HOW LONG is this "period of time"?
If I want to 'erase' this information I can simply turn off then on Siri and or Dictation and lose what I have had recorded on me. THIS fully restarts the "learning" process all over again and in turn NEGATES all the stuff it learned in the past. The KICKER is that since apple "retains what it collects for a period of time" HOW does turning the services off truly "erase" what was taken in the past?
Why can't the learning process be done directly on the phone itself without it being RECORDED and STORED by Apple?
Now, before you go off and say how Apple respects my privacy, I know all of that. I just don't believe or trust it since all this iCloud hacking has been happening lately AND I am VERY conscious of what I put "out there" for all to see and take. I don't use social networking either due to the massive invasion of my privacy. Plus I find it silly. I will not be reduced to a low level of conversation where the simple "like" is the equivalent of a reply. -
Thunderbolt camera stopped working with Skype and Google Hangouts
Some time ago my built in camera on the thunderbolt stopped working with Skype. If I activate the camera the green light turns on but the screen either remains black or it shows that spinning loading incon forever. The green light stays on indicating the camera is active no matter what I do with skype even if I press the button to deactivate the camera. The green light remains on until you completely kill skype. Rebooting, reinstalling skype, etc. does nothing.
Today I disocvered I have the same thing with Google hangouts. All the way around exactly the same and the green light won't turn off until you kill the web browser. Same thing with FireFox or Safari. Also it no longer works on Viber either.
It's quite infuriating.
I am not sure if this has anything to do with this awful virus like program called "CamTwist" that I installed once and had a very difficult time removing or not.
Reinstalling OS X from scratch is not an option. Too much work, too many programs to reinstall and reconfigure etc.
How can I get my camera back?
The camera works just fine with Photobooth and facetime.
Thanks.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1250 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 225 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%d MB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[6]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|Goog|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} Trust\ settings );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 77 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
How to restrict sales group and sales office in va01?
in transaction "va01" ,I want to restrict "sales group" and "sales office", but there is no
relative authorization object. I create a role named "z1000test001" with va01 , there are only "division","sales organization"
and "distribution channel" which could be restricted.
the authorization object with va01 is : V_VBAK_VKO.
and I find another authorization:V_VBKA_VKO ,which contains:"sales group" and "sales office",
but this one seems have no relationship with va01.
Is there any method to restrict "sales group" and "sales office" in va01?
Could anybody help me?Hello,
This has been discussed before and there's a solution available.
Have a look at this thread: Authorization for Sales Office and Sales Group
Cheers
Jurjen -
Internal table with Import and Export
Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
PrabhuHi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers. -
Hi everyone,
What is the steps and Procedure implement Wired and wireless authentication with ISE, WLC and AD for a LAB environment. currently the following are done.
The wireless network is configured with 2 SSID (Staff and Guest)
Active Directory, DNS, DHCP, and NTP configured & synced.
ISE and AD running on C220 VMs, and WLC is 5760 Appliance.
Please provide your thoughts and assistance.
RegardsYou have to implement dot1x and radius between your NAD and ISE device.
Using the switch 3850, that are the steps:
username RADIUS-HEALTH password radiusKey1 privilege 15
aaa new-model
aaa authentication login default local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting auth-proxy default start-stop group radius
aaa accounting dot1x default start-stop group radius
!this password will be used to communicate with ISE and to verify reachability
!between ISE and Switch
aaa server radius dynamic-author
client 172.16.1.18 server-key 7 radiuskey
client 172.16.1.20 server-key 7 radiuskey
ip domain-name lab.local
ip name-server 172.16.1.1
dot1x system-auth-control
interface GigabitEthernet1/0/3
switchport mode access
switchport voice vlan 50
switchport access vlan 10
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
ip access-list extended ACL-ALLOW
permit ip any any
!the comm between radius and ise will occur on these Port
ip radius source-interface Vlan100
logging origin-id ip
logging source-interface Vlan100
logging host 172.16.1.20 transport udp port 20514
logging host 172.16.1.18 transport udp port 20514
ip radius source-interface Vlan100
logging origin-id ip
logging source-interface Vlan100
logging host 172.16.1.20 transport udp port 20514
logging host 172.16.1.18 transport udp port 20514
snmp-server community ciscoro RO
snmp-server community public RO
snmp-server trap-source Vlan100
snmp-server source-interface informs Vlan100
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 10 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
!defining ISE servers
radius server ISE-RADIUS-1
address ipv4 172.16.1.20 auth-port 1812 acct-port 1813
automate-tester username RADIUS-HEALTH idle-time 15
key radiusKey
Please be sure that NTP servers and time are synchronized.
enable dot1X on windows machine, or using cisco NAM.
you can enable debugging on aaa authentication to see the events.
you have to create this user on ISE (RADIUS-HEALTH).
3850#test aaa group radius username password new-code
and observe the result. You are supposed to have user authenticated successfully.
You Must also have define these device in ISE on the radius interface.
ip radius source-interface ..... use this interface ip address to define Ip address of the NAD device in ISE.
administration-->network resources -->Network Devices-->Add
input the name
input the Ip address for radius communication
select the authentication settings and field the corresponding shared secret radius key
select snmp settings and select version 2c.
snmp community : ciscoro
you can customize the polling interval if you want and that all.
you are supposed to received message communication between your NAD and ISE.
After you can do the procedure for WLC device.
I will fill it after you have passed the first steps (3850 authentication). -
Using iPads @ configurator in school with school AND personal iTunes accounts
Hi all,
My kids school has introduced a managed ipad program which includes most parents purchasing the iPads but still having them managed by the school.
As we own these devices the kids take them home every day
iPads are ipad 3 and above
The school has setup configurator for mass deployments/ updates etc. and have the one iTunes account for all using vpp
With the initial deployment we were able to install our own personal apps using our own personal iTunes account to install and update ourselves.
There was no expectation that the school would manage these personally acquired accounts.
In the last week the school has removed the App Store front the iPads effectively removing any ability we have to install our own personal apps.
I have spoken with them and their stance is that it is too hard to manage updates because occasionally the iPads come back to the school logged in with the personal iTunes account
Can anyone out there please share any experience/solution that they may have which will allow the iPads to be managed through configurator whilst still allowing us to install our personal apps?
The school have said they will return our rights if a solution can be found.
I am very surprised that this is not possible and seek the assistance of the community.
I am based in Australia
Thanks in advanceHi Rob,
If the school is using Apple Configurator and have set the iPads to "Supervised" mode, it will prevent anyone from using their personal computers and iTunes to install apps or copy other data to/from the iPads to the personal computer. If the school has restricted the App Store on the iPad with a configuration profile, then they've made it impossible for you as a parent to install apps. (I'm surprised they did this being that these are personally owned iPads!)
In our school district, we are set up with a "Layered Ownership" model that allow us to buy and install apps that were purchased by the district, as well as allow the kids to do the same with their own personal Apple IDs. We don't have the App Store locked down on the iPads. The kids or parents can log in to the App Store on the iPads and install whatever they want. Even if they are logged in with their own personal Apple ID, we can still install apps that we as a district purchase using an MDM.
All of the app updates that we do for the apps that we have purchased are done though an MDM (mobile device management) server. There are many MDMs out there and perhaps your kid's school district could look in to using an MDM to manage their app distribution. There are a few different ways that MDMs have to distribute apps so your kid's school would want to talk to an MDM provider to see how they can help in your situation. We've been using an MDM in our school district for a year now and its been working great.
Here's a list of MDMs that you could send to your kid's school:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
Hope this helps. Good luck to you!
~Joe
Maybe you are looking for
-
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone
-
Calling a procedure from Oracle Forms with OUT parameter
HI, Can anyone tell me in detail how to call a procedure with OUT parameters from Oracle Forms 6i ? Thanks in advance.
-
After updating to 6.1.3 my phone has no sound, no ringtone, no keytone, after updating to 6.1.3 my phone has no sound, no ringtone, no keytone. How can I fix this?
-
Will all iPad 2 cases fit the new iPad
I am getting the new iPad and want to get a smart cover for it for when it arrives but don't know if there is all new accessories for it or can you still use the current iPad 2 covers i know the new iPad is a little thicker?
-
Acquire encoder position with Motion and DAQ
Hi, I am trying to acquire an encoder position with Motion. It seems impossible to set the frequency of the acquisition with Motion and I must poll for the position in a do-while loop. I have read in a lot of threads that one can use RTSI lines to re