RsItemNotFound When try to open a report.

We have a bunch of reports deployed on SSRS 2008 r2. These are accessed through a browser normally.
We also have a VB Application - through which some of the above reports are accessed using WebBrowser.Navigate(string)
The report I'm trying to access is a report that contains a whole bunch of sub reports. the main report simply takes and passes the parameters to sub reports.
I have a report I'm accessing currently through this vb application. It's named 1190_Marketing_Detail.rdl
and it takes branch location as parameter.
Below is the string I'm passing and it works. The same string/url I place in the browser address bar, I get the report.
If I remove the parameter LocationID=40 I get an appropriate error message similar to the first bullet point below.
"http://reports.organization.net/ReportServer/Pages/ReportViewer.aspx?/APA/1190_Marketing_detail&LocationID=40&rs:Command=render&rc:Parameters=false&rc:Toolbar=false"
Now I'm trying to access another report(the one that has sub reports as I mentioned above) It's named simply 1190.rdl
and it takes a bunch of parameters. However, right now I'm not passing any parameters. Below is the string I'm passing
"http://reports.organization.net/ReportServer/Pages/ReportViewer.aspx?/APA/1190&rs:Command=render&rc:Parameters=false&rc:Toolbar=false"
I'm expecting error message like below
This report requires a default or user-defined value for the report parameter 'LocationID'. To run or subscribe to this report, you must provide a parameter value.
But I get this instead
The item '/APA/1190' cannot be found. (rsItemNotFound)
1190.rdl is there. I'm not sure why reporting services doesn't see it. Thanks in advance for your help.

When you navigate to the report in the APA folder using report manager, as it's listed there, does it have the ".rdl" extension in the name? If so you'll have to reference it in your URL. Otherwise, you might try renaming the report temporarily to
see if something odd isn't going on in the back end.
You might also verify the permissions on the report and make sure no one broke inheritance or something and removed permissions. It's also possible the account accessing the report doesn't have access to one of the sub reports.

Similar Messages

Error shown when try to open a report in 11.1.1.5.0 environment

Hi experts
The version of the environment is 11.1.1.5.0
Customer is encountering 　the following issue,
when he use weblogic user to login and try to open a publisher report, he will get the following error message.
and the URL is http://128.1.100.90:9704/analytics/saw.dll?bipublisherEntry&Action=open&itemType=.xdo&bipPath=%2F........
====
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xdo.XDOException: Could not get data source connection for: Oracle BI EE
and when he click new data model, click dataset, click new dataset-select sql query click query builder
he will get the following error and the URL is http://128.1.100.90:9704/xmlpserver/gb/mainWrap.jsp?sql region=ds_sql_query_newDS&ds=Oracle BI EE&fixedSch=false
====
java.io.IOException: Cluster Error: No active server node found.
Could anyone give me some advice on how to investigate the issue
Looking forward for your reply
shuangfei

Hi experts
Any suggestion on this issue.
Could you give me some advice on how to investigate the issue.
Regards

CR XI R2: Crystal Reports freezes and crashes when I try to open a report

I added this question as a Reply to a message by nic2deep a month ago <Crystal Reports freezes every time I try to open a report.>, but got no response so I thought I'd try again on my own.
I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested to nic2deep:
1) Open Contol Panel and add/remove programs and select CR. Do a repair install and if possible use the Custom Options and install all DB drivers and Export options, except Lotus Notes, unless you' re using them.
Results: Tried many times with no effect.
2) It may be that your firewall setting or anti-virus software is blocking access to system files or resources. When you do the repair install make sure to disable them and un-plug yourself from the network so you protect your PC while they are off line.
Results: Firewall was always OFF because network security handles all that. Can't turn off anti-VIrus, but both computers have the same antivirus system anyway.
3) Look in the System and Application Event logs in Admin tools; it may give you a clue what your PC is trying to get to and being denied.
Results: The only thing that is logged in Admin Tools when this happens is a "Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this? Something in the Registry?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Hi Debi,
Because in CR XI R2 it is WYSIWYG meaning we use both the display and the printer drivers to render the report. Same as what PDF does. If we can't find the printer the report was designed against, and all the placements of each object is dependent on the printer when designed, we have to default to your default printer to be able to calculate internally when to render the report objects and format the layout thus the message from CR indicating so.
Basically CR dynamically builds the page layout dependent on the local system. Also the reason why CR requires a default printer to be installed, if it's not then we use Microsoft's Generic Print driver. It's not that reliable either but we have to use something.
And another "for your info" is the same for our database drivers. Example, if you create a report off of MS SQL Server and then you want to view the SQL CR generates you need to log on first. This way CR can query the DB client and generate the SQL according to the DB. If you just want to see the SQL you could just set location to Access, problem with this is because CR dynamically generates the SQL according to the DB you set lcoation to we may change the SQL Statement and not actually show you what the report uses when connecting to the real database.
One of the side effects of supporting so many DB's and Printers and Video drivers. Sometimes drivers do non-standard functionality which CR did not anticipate or code on how to handle.....
This all changed in CR 2008, we are not as dependent on the printer driver but this created a whole new set of problems if you hadn't noticed from all the Printer problems posted.... But we are going back to the CR XI R2 printer functionality model to resolve all of the issues....
Thanks again
Don

When I try to open oracle Reports 6i its hanging..

Hello..
I'm on Windows XP Sp3. As above, when I try to open oracle Reports 6i its hanging.. How can I check to see if the Reports Server is up or down? If its not that, has anybody got any thoughts on why its not opening? On double-clicking either the icon, the exe or a report rdf file its get as far as the initial banner before halting.
My environment variable path has the path of the reports Builder exe first in its list.. Anything else I could try?
If there's no way I can open reports builder now, how else could I possibly get the SQL that the report is built on?
thanks for looking..
Steven

.

BPC 10.1 - dump in unified model when I try to open System Reports

Hi, we use BPC 10.1 unified and every time when try to use "System Reports" it dumps. I can select e.g. BPF Activity Report and Templates -> Template Verions -> Instances and finally "Display Report" but there is no result besides the endless loading screen. Is there a certain web Service that has to be activated first? Thx for any hint

Hi Christian,
Which connection type did you use in EPM Add-in? Please take a look at note 2002609 - RUBPC101N: EPM connection error message: No connection
extension has been discovered for the ConnectionClass 'Firefly_BW' . It might resolve your issue.
Best regards,
Jingjing

Internal error when try to display Interactive Report

Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
Lukasz

Hi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz

Error message when trying to open a report

Post Author: gronkette
CA Forum: General
I created several reports using the Professional Version, I have been upgrade to the Designer Version and now when I try to open a report I get the following error:
The Parameter is incorrect
Help !!! I need these other reports.
thanks!
Using CRXI

Post Author: synapsevampire
CA Forum: General
There isn't a designer version, do you mean developer? And what version of Crystal?
If they upgraded you to the standard edition, then you've lost plenty of functionality.
Also if they upgraded you to developer from professional, yet didn't bring the service packs up to date, but did on the previous version, then it will have problems as well.
Please include valid information in your next post, and the version of Crystal if the above doesn't resolve.
-k

Crystal Reports freezes every time I try to open a report.

Crystal Reports freezes every time I try to open a report. I feel like it has something to do with trying to locate the default printer, but Im not certain. Crystal Reports opens just fine,but the moment I try to open any report it just hangs. Please help!

My problem is very similar to this person's. I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested, but the only thing that is logged in Admin Tools when this happens is a Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Error when trying to open a report

Hello,
We have installed Oracle Discoverer Desktop on a Windows Vista 32bit following the documents from the oracle support page.
We are able to connect to the database and see all available report but we get a "Program has stopped responding" message when trying to open certain reports.
For other reports it works great.
Do we need to check something in our windows ? Change something in the Discoverer install or in Windows ?
Please advice.
Thank you and regards,
Sorin Miroiu

We are running a 10.2.0.4.0 Database on a Red Hat Linux 3.2.3-47
cat /proc/version
Linux version 2.4.21-27.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-47)) #1 SMP Wed Dec 1 21:59:02 EST 2004
The discoverer version is 10g.
There is nothing special to those reports we can't open. We aren't able to open them just on Windows Vista. They open just fine on a Windows XP.
Also Discoverer Administrator is working OK on the Windows Vista machine.
Is there an Oracle bug listed for this issue ?
Thank you and regards,
Sorin Miroiu

I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.

I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.
Thanks
Hugh Lockwood

Hi, Hugo,
In similar cases it helped to remove the GarageBand "Preferences" file from the User Library.
Open the folder
your home folder > Library > Preferences
and move the file "com.apple.garageband.plist" to the Desktop.
Then try again to launch GarageBand.
Regards
Léonie

Have mutli ver of LV -7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when try to open CODE from WIN7 32 bit LV10?

Have mutli ver of LV -7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when try to open CODE from WIN7 32 bit LV10?
What Driver do I need? VERSION Please -- DAQmx works fine in LV8.6.
Solved!
Go to Solution.

Hi Briana,
I believe I understand what you're asking, but which current DAQmx driver are you using with LV 2010? Only the 9.1.5 and above drivers are compatible with LV 2010, while many of the older drivers will still work for you in LV 8.6. Below, I've linked a compatibility chart for DAQmx drivers and Labview versions.
http://digital.ni.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298
Does this answer your question?
Regards,
Austin S.
National Instruments
Academic Field Engineer

HT4108 How do I connect I 4 phone to Satellite model Toshiba Laptop. Tried connecting via normal charging cable into laptop & when try to open the web am advised 'The device has been disconnected or unavailable'. Amaysim is carrier.They have tethered phon

How do I connect i 4 to Satellite model Toshiba laptop. Tried connecting via cable via normal charging cable. When try yo open web advised 'this device has been disconnected or unavailable' AMAYSIM is carrier & advise they have tethered phone & should work?

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

Why do applications keep force quitting when try to open them?

Mail, microsoft word, chrome, firefox, iPhoto and another apps force quit wheni try to open them. i have run disk utility and onyx many times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I ve got this page (Internal Server Error ) when try to open htmldb 2.0

i install htmldb 2.0 sucssefully but when try to open with this path
http://hostname:7777/pls/htmldb/htmldb
it gives me this page
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-HTTP-Server/1.3.28 Server at <hostname> Port 7777
any help

i know it is silly question but where can i find server error log
this is my dad.conf
Alias /i/ "D:\htmldb\Apache\Apache\images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/htmldb>
     SetHandler pls_handler
     Order deny,allow
     Allow from all
     AllowOverride None
     PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
     PlsqlDatabasePassword sys
     PlsqlDatabaseConnectString myhostname:1521:orcl1
     PlsqlDefaultPage htmldb
     PlsqlDocumentTablename wwv_flow_file_objects$
     PlsqlDocumentPath docs
     PlsqlDocumentProcedure wwv_flow_file_manager.process_download
     PlsqlAuthenticationMode Basic
     PlsqlNLSLanguage AMERICAN_AMERICA.UTF8
</Location>

After upgrading to OSX Mavericks Mail App quite when try to open my MS Exchange Mail Messages

After upgrading to OSX 10.9 Mail App quits when try to open my Mail messages. I have a MS Exchange account. I have removed account and installed it again. All messages where downloaded normally but when I just click on a mail the app quits :/

The option key... I've been holding down the command key... No wonder that didn't work. I should really be writing this stuff down!.
Regardless, Downloading and reinstalling iTunes did the trick.
Thank you mende1 & saffron63 for the assist!

RsItemNotFound When try to open a report.

Similar Messages

Maybe you are looking for