RSRT re-generation

Hi Gurus, how do I do re-generation in RSRT. When a query is being run, I am getting "System error in program SAPLRRK0 and form MEGA_SORT_14-01"
Thnx.

Hi,
It seems like you have changed something in the query. If you want to run that using RSRT; specify the query name and click on "Generate Report".
Hope this helps.
PB

Similar Messages

Crytal on bex giving old values

Hello BW Experts,
I have a crystal report which runs out of a Bex query. I ran the crystal report at time T1. after that i have made some changes to the restrictions in the Bex report. and ran the Bex report at T2. Bex is giving me data according to the changed restrictions. But when i run the crystal report it is showing the data as of time T1. so basically it is not giving the latest data, where as the Bex is giving the data according to the latest changes.
anyone experienced a similar problem?
what could be reason behind this. do you think it is a crystal -- BW integration known problem.
suggestions appreciated.
Thanks,
BWer

Jeff,
i followed the rsrt report generation. it is giving correct results in BW. Only when the same query is referenced in the Crystal it is still giving the old results. somewhere the crystal report is accessing the old definetion of the query. to test in crystal, we are creating a new report the bex query and running. still it is giving results according to the old bex query definetion.
Suggestions appreciated.
Thanks,
BWer

Short dump in report generation for bex query

Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category               ABAP Programming Error
Runtime Errors         RAISE_EXCEPTION
ABAP Program           SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!

Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran

Doubt in RSRT regarding generate query.

Hi All,
I have a doubt in transaction code RSRT (Query monitor). Under the tab environment, there are 2 options.
1) Generate queries.
2) Gen.Queries directly as shown below.
i.e in RSRT> Environment> Generate Query
and RSRT> Environment> Gen. Query directly.
I would like to know what the functions of these two options are and what they do?
And also would like to know how these 2 are different from generate report.
I know generate report means regeneration of query, but what does regeneration of query actually do?

1) generate queries = generate the query @ next call.
This means it does not gets generated unless the query is called by a workbook, web template,...
2) Directly: generates the selected queries directly.
Generation of a query: a query is in fact an ABAP program. This program is created by the BI system.
To generate a query is to 'create' the ABAP program for the query.
You can also delete the old ABAP's (old versions):
environment -> delete old ABAPs

How to include RSRT into process chain

Hi Gurus ,
I need to include the RSRT into my process chain,
Can anyone guide me
Thanks in advanvce

Hi,
first of all the report should be regerated only if you have changes in its definition.
More over, generating a query will empty its cache; OK, if you are loading one of its IProvider during this chain then the cache will be invalidated anyway.
I don't get the point of the variables at this stage; the generation of the report is like a "compilation of its code"; not an execution of it.
If you need to execute it once after the loading by the chain (or any other process within your chain) then you can use the reporting agent in order to precalculate it (search this forum for precalculation or help.sap.com).
If you really want to regenerate your query, you'll have to write an ABAP report and add it to your chain;
here you go:
TYPE-POOLS: RRO01.
data: l_s_rkb1d   type rsr_s_rkb1d,
        l_sx_report type rro01_sx_report,
         i_s_repkey LIKE RSZCOMPKEY.
*BREAK-POINT.
SELECT SINGLE GENUNIID INTO i_s_repkey-GENUNIID
FROM RSRREPDIR
WHERE COMPID = 'ZRT_ZICRT_C07_003' "the techname of your query
AND OBJVERS = 'A'.
check sy-subrc = 0.
call function 'RRI_REPDIR_READ'
     importing
        e_s_rkb1d = l_s_rkb1d
    changing
        c_s_repkey = i_s_repkey
    exceptions
        others     = 1.
check sy-subrc = 0.
call function 'RRI_REPORT_GENERATE'
    exporting
        i_pretty_print = ' '
    changing
        c_sx_report    = l_sx_report
        c_s_rkb1d      = l_s_rkb1d
    exceptions
        others         = 0.
hope this helps...
Olivier.

Delta buffer query in RSRT for BI-IP (" infoprovider /!!1 infoprovider )

Hello People,
I have an input ready query over an aggregation level of a real time cube. Whenever the yellow request is closed and a new request is opened, the input ready query does not show the old data. And sometimes it shows incorrect data. We found that the issue is with the Cache.
In RSRT when opening the input ready query in debug mode with "Do not use cache setting", the query returns correct data. But the surprise thing is that, the input ready query has Cache setting as inactive (0) in RSRT. So we had to generate the Delta buffer query <infoprovider>/!!1<infoprovider> in RSRT where <infoprovider> is the name of the real time cube.
This solved our problem and the query brought in correct data. But again when I close the second request, the input ready query again shows me no data or shows me wrong data. So again we need to generate the delta buffer query in RSRT <infoprovider>/!!1<infoprovider>.
This is very annoying when considering the fact that you have to generate the delta buffer query every time the request is closed. This could be a overhead in maintenance and will not go well with people.
Does anybody have any solutions for solving this issue. Is there any setting by which we can turn off cache altogether or delete cache when a request is closed etc? or worst conditions how to automate the generation of delta buffer queries every time the request is closed?
Any help is really appreciated.
Regards,
Dove.

Hello Gregor,
Thank you very much.
I was preoccupied with the prerequisites of Note 1179076. It says that if you have already imported 15 and 16 and if you not have imported note 1101187, then no further action is necessary.
We are in support package 17 and not implemented 1101187, so I thought this note will not help us.
Am I wrong? Can you please throw some light??
Regards,
Arunan.C.

Mass generation of queries?

Hi,
I know the generation function of queries in transaction RSRT. But here I can only generate one query (enter query and press generate report button).
But I would like to generate all existing queries on a cube in one step (as a background job if possible).
Does anybody know if there is such a functionality available on a BI 7.0 system?
Thanks in advance
Frank

Frank,
In the RSRT transaction, go to Environment --> Gen. Queries Directly. On the next screen, you can specify one or more InfoProviders, then choose Program --> Execute in Background.
Hope this helps...
Bob

Query Generation for no apparent reason??

When looking at the statistics in 0TCT_C02, we have noted that our queries regenerate or optimize multiple times each day. I have tested this with a single query and I was sure to go into RSRT and turn off the optimization option. Exceedingly longs times in 0TCT_C02 for event 3010 (OLAP: Query Generation). We are talking times on the order of 45 seconds. I know that each query is supposed to be regenerated once every 31 days by default. What else could be triggering this behavior?
Examples:
Date Time (HH:MM)   OLAP Gen Time (3010) from view RSDDSTAT_OLAP
11/10/08 00:00     0.207153
11/10/08 01:06     46.295823
11/10/08 02:17     0.382898
11/10/08 02:22     0.047491
11/10/08 03:00     0.527515
11/10/08 03:00     0.037425
11/10/08 03:00     0.031306
11/10/08 03:00     0.031065
11/10/08 03:00     0.030289
11/10/08 12:26     27.802359
11/10/08 12:56     0.148548
11/10/08 13:04     0.255053
11/10/08 13:08     0.345807
11/10/08 13:08     0.033123
11/10/08 13:08     0.032887
11/10/08 13:14     0.448533
11/10/08 13:14     0.074349
11/10/08 13:14     0.043456
11/10/08 13:14     0.040294
Why would it regenerate multiple times a day? How do we get this to stop or at least control it better?
(The query itself has not been changed since August of this year).
Thanks for any info:
Mitchell

Hi there.
The reasons why a query is regenerated :
   - Template changed
   - Does generated report exist
   - Infoprovider changed
   - Key figure / chararacteristic changed or deleted
   - Report definition changed
If you are loading data regularly during the day, this may cause the regeneration to occur. SAP Note 1137994 should be helpful for this. SAP Note 1056259 talks about query generation and has further Notes for optimization. See section 4.
Hope this helps,
Karen

Report for query generation

Hi,
Is there any report available in BI for Query generation based on particular cube/multiprovider/ods.
One way to do so is to go to RSRT & type in query name and generate it.
But we have a large number of query's defined on a particular cube so we want a report that can help is to achieve the same for mass query generation.
I have seen the report but i am missing the report name, can anyone help me to achieve the same.
thanks
dipika

HI Sreekanth S :
Thank for your giving , If the operation When i excute u201CRSR_GEN_DIRECT_ALL_QUERIESu201Dand input the name of my query equal to the function which i generate reports in "RSRT"?
Hope for your help.
Thanks.

Open vi error for report generation toolkt

Originally it works fine.
Now I upgrade to win7, LV9 and office2010.
To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
But still got the error as attached.
Any suggestion, thanks.
Attachments:
ss.png ‏184 KB

1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01

1st Generation iPod Touch No Longer Recognized by Windows 7 PC

I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.

You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
- Did you try another cable?
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try on another computer

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

I'm trying to get the ios 4.2.1 on my second generation iPod . Is there a way to install it directly on my iPod touch because my iTunes on my computer is not working. Please help Apple! I need the update. Just give me a link.

Im trying to get the ios 4.1.2 on my iPod touch 2nd generation. Can I install it directly on my iPod . My iTunes on my computer isn't working!

you have to have itunes installed but check out http://support.apple.com/kb/ht4623.

Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

Hi all,
I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
I have made some steps, like "Open Workbook", "Write Data", etc.
My steps run well, excepts one step : "Close Workbook".
If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
I feel that I'm trying to use a reference which has been killed in the "Stop" step...
I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
Thanks,
Callahan

Hi Callahan,
SignalExpress (SE for short) does the following on the Stop event:
1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
3. The VI is then run, with those values and states.
4. SE checks to see if any errors where returned.
5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
Hope that helps. Feel free to post your LLB if it doesn't.
Phil

Report Generation: New Report.vi

Running applicaion in development mode works fine.
After compiling however I get Error 7: Open VI Reference in New Report.vi
Why am I getting this error?

Has the version of Office on your machine changed since you installed the Report Generation Toolkit? The VIs will become broken if the ActiveX interface changes, and this can happen when the Office version changes. I recommend uninstalling and reinstalling the toolkit. Also, what version of Report Generation Toolkit are you using? The latest version is 1.1.1.
-D
P.S. - I'm going to respond to your other thread that you started with a link to this one. Instead of creating multiple messages on the same question, just wait for a response to your initial thread.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

RSRT re-generation

Similar Messages

Maybe you are looking for