Delta buffer query in RSRT for BI-IP (" infoprovider /!!1 infoprovider )

Hello People,
I have an input ready query over an aggregation level of a real time cube. Whenever the yellow request is closed and a new request is opened, the input ready query does not show the old data. And sometimes it shows incorrect data. We found that the issue is with the Cache.
In RSRT when opening the input ready query in debug mode with "Do not use cache setting", the query returns correct data. But the surprise thing is that, the input ready query has Cache setting as inactive (0) in RSRT. So we had to generate the Delta buffer query <infoprovider>/!!1<infoprovider> in RSRT where <infoprovider> is the name of the real time cube.
This solved our problem and the query brought in correct data. But again when I close the second request, the input ready query again shows me no data or shows me wrong data. So again we need to generate the delta buffer query in RSRT <infoprovider>/!!1<infoprovider>.
This is very annoying when considering the fact that you have to generate the delta buffer query every time the request is closed. This could be a overhead in maintenance and will not go well with people.
Does anybody have any solutions for solving this issue. Is there any setting by which we can turn off cache altogether or delete cache when a request is closed etc? or worst conditions how to automate the generation of delta buffer queries every time the request is closed?
Any help is really appreciated.
Regards,
Dove.

Hello Gregor,
Thank you very much.
I was preoccupied with the prerequisites of Note 1179076. It says that if you have already imported 15 and 16 and if you not have imported note 1101187, then no further action is necessary.
We are in support package 17 and not implemented 1101187, so I thought this note will not help us.
Am I wrong? Can you please throw some light??
Regards,
Arunan.C.

Similar Messages

Difference between Plannning Buffer and Delta Buffer in IP

Hi,
Can anyone please explain the difference between planning aand delta buffer in IP, with an example?
Regards,
Deepti

Hi,
Planning buffer is the data that is been retrived from the cube or the master data for the first time when you open the application for the first time.Now all the planning functions will read the data from this buffer and even writes back all the changes in the record to the same buffer.The planning function refers to the planning buffer data; it modifies the data and writes it back to the planning buffer.Every time a detail application is executed, the system first checks whether the requested data already exists in the planning buffer. If it does, the system accesses the version of data available in the planning buffer. If the data is not already in the buffer, the system reads it either from:infocube or master data.
Now with delta buffer ,once the data is available in the planning buffer and you made some changes to it only the delta part of the records will be written back to the planning buffer as well as it is reffered as delta buffer and the same delta buffer will be written back to the cube not the entire planning buffer.
For example:
If the query has to read the record as follows then for the first time :
PROJECT,WBS,COST ELEMENT,FISCPER,QTY,CPU,AMOUNT.
P1, WBS1, CE1, 010.2009, 50, 100, 5000
sO IN PLANNING BUFFER u 'll be having the above mentioned record and the above record will be called as planning buffer record.Now if you make some changes to the record through planning function or manually then :
P1, WBS1, CE1, 010.2009, 100, 100, 10000
So now the above new record will be posted as delta buffer as:
P1, WBS1, CE1, 010.2009, 50, 100, 5000
So now the planning buffer will have the original record as well as the delta buffer.So when we save the data the delta buffer is written to the cube but when we retrive again from the planning buffer the old record and the delta buffer will be aggregated and displayed.
Hope it is clear now.
Regards,
Indu

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

Query execution - RSRT - Abap Web - Several Logon prompts

Hi,
I am trying to execute a query in RSRT transaction after choosing ABAP Web option. When I click on the abap web button, it opens a new browser window
http://<server> : 80NN/SAP/BW/BEX?&QUERY=ZRF490N , but with a logon screen. I try to logon with my abap credentials, but it repeatedly asks for the credentials. If I say Cancel, it allows me to execute the query.
What would have gone wrong? FYI, I have already checked the service /sap/bw/bex in SICF transaction, and it remains standard as in other systems.
Thanks in advance for your hints.
Regards
Abdul

Hi,
Please can set up the anonymous service in SICF refer to SAP Note 653099
and maintain an anonymous user for the service Mime according to the SAP
Notes 516884 and 487456 in order to avoid that logon request.
Please refer the following URL:
http://help.sap.com/saphelp_nw04/helpdata/en/d8/
25ea401675752ae10000000a155106/content.htm
Thanks,
Venkat

Problems while execution of query using RSRT tcode

Hi Experts,
I have built a query in development server and I have executed the query using RSRT tcode.I found some of the fields were having cross marks.Again I checked the no of records coming from infoprovider for that field.Data was coming from the cube.But I cant understand why for those particular fields cross mark were coming.Is it an issue?if it is an issue please tell me how to sort out.
Regards
Rakesh

Hi Durgesh,
First of all the field for which I got X symbol is not a selection criteria field.Rather it is an naviagational attribute of a characteristics.In my query service order is a charecterictreristics and status type is an attribute of it.I am checking the status type of different orders.For a particular order and status tupe X symbol is coming.
Regards
Rakesh

WARNING BRAIN (230):Could not buffer query structures.

Hi
We are trying to run a OOTB report and we are getting redirected to Bex but we are getting the following error in the UI
Unknown Error: [object Object].
com.sap.bi.base.application.exceptions.AbortMessageRun
timeException: Termination message sent
WARNING BRAIN (230):Could not buffer query structures.
Buffer too small
Could you please suggest how to proceed further on this?
Regards
Neel

Hi Neel,
As the message indicates the query you are trying to execute is too large. You might have to request your basis team to add more memory for this report execution.
Secondly of this reason we do not recommend anybody to run the SPM - Spend Analysis Final query as is, because we have a whole bunch of dimensions & measures in the query. If you have a lot of data in your system then the system would need quite a bit of resources to run this query.
I would request your basis team to look into the query cache parameters (Global & Local cache size) and see if they can be increased. Also check query caching persistence mode and see what works best.
Regards,
Rohit

Query not release for OLE DB

Hi..Experts
I need to design a query say Q1, Its taking prod order through a replacement path Query Q2,which is
restricted by Cal month variable.
As i check Query Q1 for allow external uses, Its giving error " Query not releases for OLE DB"
But when I restrict Q2 by fixed month then there is no error....but this is not fulfill my requirement.
I need Q2 should be restricted by Cal Month variable...
What I have done is.....first I restrict Q2 by fixed month. then Q1 query executing perfectly.Once Q1
is executing again i restrict Q2 by cal mont variable. Then also Q1 is running fine, even though it is checked allow
external Access.
I also execute Q1 query in RSRT without using cache . It is working fine. But as I open Q1 on another day is not working, WHY?
I am not getting....Please help me...
your comments will be appreciated..
Edited by: Abhishek@maventic on Jul 8, 2011 3:10 PM

Check whether this helps you
[OLE DB for OLAP|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a8eb390-0201-0010-8fa3-b70f6f9a17c1?quicklink=index&overridelayout=true]
thanks
G. Lakshmipathi

Running a Query via Query Monitor (RSRT) works, but Java Web does not

I am running a query via RSRT (IC_SOPSAL/Z_SOPIC_CUSTSALES_01) and this is successful. But when I run the Java Web for same Query below,
http://FQDN:59800/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=Z_SOPIC_CUSTSALES_01
We get an error, The Web template "ZWEB_TEMPLATE_001" does not exist in the master system.
our BW8 and BW3 SSO configuration on our Portal System Object connectivity are not BI master systems.
Regards,
James

I am running a query via RSRT (IC_SOPSAL/Z_SOPIC_CUSTSALES_01) and this is successful. But when I run the Java Web for same Query below,
http://FQDN:59800/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=Z_SOPIC_CUSTSALES_01
We get an error, The Web template "ZWEB_TEMPLATE_001" does not exist in the master system.
our BW8 and BW3 SSO configuration on our Portal System Object connectivity are not BI master systems.
Regards,
James

How to query opening balance for all customer or Vendor for an speci. date

Hi,
How to query opening balance for all customer or Vendor for an specific date?
Example:
put any date and query will show all customer/ Vendor that date opening/current balance.
Regards,
Mizan

Hi mizan700 ,
Try this
SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
WHERE T0.[DocStatus] ='O'
AND
(T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
Regards:
Balaji.S

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Query security settings for users

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Can we implement the custom sql query in CR for joining the two tables

Hi All,
Is there anyway to implement the custom sql query in CR for joining the two tables?
My requirement here is I need to write sql logics for joining the two tables...
Thanks,
Gana

In the Database Expert, expand the Create New Connection folder and browse the subfolders to locate your data source.
Log on to your data source if necessary.
Under your data source, double-click the Add Command node.
In the Add Command to Report dialog box, enter an appropriate query/command for the data source you have opened.
For example:
SELECT
    Customer.`Customer ID`,
    Customer.`Customer Name`,
    Customer.`Last Year's Sales`,
    Customer.`Region`,
    Customer.`Country`,
    Orders.`Order Amount`,
    Orders.`Customer ID`,
    Orders.`Order Date`
FROM
    Customer Customer INNER JOIN Orders Orders ON
        Customer.`Customer ID` = Orders.`Customer ID`
WHERE
    (Customer.`Country` = 'USA' OR
    Customer.`Country` = 'Canada') AND
    Customer.`Last Year's Sales` < 10000.
ORDER BY
    Customer.`Country` ASC,
    Customer.`Region` ASC
Note: The use of double or single quotes (and other SQL syntax) is determined by the database driver used by your report. You must, however, manually add the quotes and other elements of the syntax as you create the command.
Optionally, you can create a parameter for your command by clicking Create and entering information in the Command Parameter dialog box.
For more information about creating parameters, see To create a parameter for a command object.
Click OK.
You are returned to the Report Designer. In the Field Explorer, under Database Fields, a Command table appears listing the database fields you specified.
Note:
To construct the virtual table from your Command, the command must be executed once. If the command has parameters, you will be prompted to enter values for each one.
By default, your command is called Command. You can change its alias by selecting it and pressing F2.

App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results

Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspx

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

Query /report asking for input ? in Apex

Hello all, my name is John and I am asking for help with the following,
I am new to Oracle, Apex and SQL, PL/SQL (as you can tell from my query below.)
I have the very basics of Apex (in that of making reports,forms etc).
I created this query on a view in SQL Developer where it is asking for start and end dates to filter the report. , which is what I want it to do and returns the results I want.
Now I would like to create a report in Apex where it asks for the between dates as it does in the posted query, When that is done I want to pass it to the bipublisher report for pdf printing.
I am running this query as a totals report already (without the line with WHERE clause query asking of course.) in an apex application, crude as it may be.
I have it running as a Interactive reports and can filter the dates that way of couse but I want to learn to create the user input type query/report in Apex.
I have been reading that I would need to use a "pl/sql anonymous block with a "declare' and a page process?. (gettting confused in the "declare" variables and the execute sections)
I have looked at numerous samples and still do not quite getting the blocks down.
If you could point me in the right direction of where to go or better yet if someome could show me coding on how to get this to work in apex report/query (s)?
Slow learn I guess
I am using APEX 3.1.2 on 11g database.
Thanks in advance for help on this.
++++++++++++++++++++++++++++++++++++
----query for truck totals from view-----------
,select
trucktotals.truck_number as "Truck Number",
trucktotals. truck_type as "Truck Type",
sum (trucktotals.end_miles-trucktotals.begin_miles) as "Total Miles",
sum (trucktotals.reg_hours+trucktotals.ot_hours) as "Total Hours",
sum (trucktotals.total_net_tons) as "Total Tons",
avg (trucktotals.equip_rent) as "EQR P_HR"from "trucktotals"
<strong>where trucktotals.wage_date between to_date(:Start_date) and to_date(:end_date)</strong>
group by trucktotals.truck_number, trucktotals.truck_type
order by trucktotals.Truck_Number----end query for truck totals from view------------------+++++++++++++++++++++++++++++++++++++
Edited by: [email protected] on Oct 31, 2008 12:49 PM
Edited by: [email protected] on Oct 31, 2008 12:53 PM
Edited by: [email protected] on Oct 31, 2008 12:54 PM

Hi Martin,
Thank you for the information, it is a real help to me and gives me more insight toward my learning .
It took me little while , the condition had to be modified a little bit
(had to put parentheses around the :PXXX_START_DATE .... END_DATE, and remove the period to get it to work).
where (:PXXX_START_DATE) is not null and (:PXXX_END_DATE) is not null
It does work to the sense it shows the start and end date fields and the button and the report results below that, and you can enter the dates and the results change.
Looking at my question, I should have been a little more clear in the fact I want query to ask for the dates first in a pop up type window, when you press the "Show Report" button,
and then branches off to show the report. That is the reason I think, I referred to a block or procedure to acomplish this?
Thanks and still learning
John

Delta buffer query in RSRT for BI-IP (" infoprovider /!!1 infoprovider )

Similar Messages

Maybe you are looking for