Rss; item and channel glitch

Hi,
Thanks so much for the previous input.
Now- I went to ensure the rss is accurate through feedburner and I get this Issue/Problem ...lol.
[This is bit strange, because previously the rss was fine since january up until recently.]
rss feed:
http://www.spheresofessence.com/rss/empodcast.xml
Below is the Error Message:
Sorry
This feed does not validate.
line 25, column 1: Undefined itunes:category element: item (8 occurrences) [help]
<item>
^
line 114, column 2: XML parsing error: <unknown>:114:2: mismatched tag [help]
</channel>
again, I tried adjusting things exactly like the tech specs.I tried both space between each item and space between last item and channel and with no spaces..still didn't validate in feedburner.
What is not accurate?
Any help or suggestions would be appreciated.
Thanks!! :-D
mystic

I had this same problem, but it wasn't an issue with the "<item>" tag -- as I had thought for the last hour or so.
Looking immediately above the <item> in my code, and comparing sample text side by side, I realized that I had improperly closed (or failed to close) the tag above.
In my case, it is the <itunes:category> tag, which much be closed with an </itunes:category> tag ... or at least in this case it must.
Have a look just above <item> and see if that does the trick.
Good luck.

Similar Messages

ITunes U RSS feeds and Firefox Live bookmark

It seems there is a problem with rss feeds and ffox live bookmarks.
I tried subscribing to - http://deimos3.apple.com/WebObjects/Core.woa/Feed/itunes.stanford.edu.1524698736 .01524698739. However I do not get the plus sign indicating there are additional items.

Apple allows you to interact with iTunes U as an administrator through an XML-based web service. It's described in the iTunes U administrators guide:
http://tinyurl.com/5nm73n
In particular, you're looking for the UpdateGroup web service directive:
http://tinyurl.com/bmh2xw
If you send Apple an UpdateGroup directive, referring to a specific group (tab) within a course that feeds from one of your RSS servers, you're asking Apple to process the feed "now" (where "now" is defined to be "as soon as possible") as opposed to having to wait for an overnight feed refresh.
Have a look at the documentation ... if you're a little bit of a developer, it should make some sense. If not, I owe someone from Apple a favor and might give you a simpler way of using the directive ... without requiring you to write code yourself.

Fetch unread RSS items from mail, set them to read, save the text to a file

This is what I want to do, and needless to say I am having a little trouble.
I wish to take the unread mail RSS items, set them to read, and then save the TEXT of the articles (not the title, time, or author) to a TextEdit file in my Documents folder.
So far I have Get Feeds From Mail > Filter Articles > Get Text from Articles > New Text File
This is all fine and dandy, but how do I just get the TEXT and not all of the crap that comes with it?
Thanks!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

Safari 5.1 (7534.50) [for Windows] is not updating read RSS item counts

I've just upgraded to Safari 5.1 (7534.50) [for Windows]. I've noticed that the RSS new item indicator counts are not being decremented after I open the RSS page for that item. Are others experiencing this problem?
I went so far as to create a new addition of an RSS entry, it indicated unread items. After visiting the RSS aggregator page the count does not go to zero as it has been prior to installing this new version.
Any suggestions on what to look at to fix this, or is this truly a bug in this new version?
Thanks.

well - i serious does not understand why apple did this. RSS broken, removing single cookies is not longer possible - except you visit the page and go in developer window. these two functions are very important for me, and maybe for other devlopers too - anyway ... i love the safari, because it is one of the fastest and css conformest (:-) browser. but step back one version is NOT an option ! I don't see that these things coming back, or getting fixed in short way, steping back and stay on old browser is a no go for me (bugs, injections, bla)
so i decide somedays ago to migrate anything to firefox 5. using tons of addons to bring back a bit confortability. i try meanwhile 4 external rss reader, and lol all what i have to say is - forgot all external rss readers - they are crap - do not waste time to find a replacement like safari. now i have firefox 5 with sage (this is not bad - some issues - but ok - updates only on click (bad) - and does not mark read after left (bad) - but in total better than a constant not updating counter), rightbar, adblock, status4ever, and much more. And it is ok ... i have a fast PC so idk speed at all :-) FF and Safari are different !! But after 3 days of usage the differences getting less and less. Well the point is - i browser websites - no matter what browser i really use ... (thinking like that makes easier for you to switch - haha - troll-my-self - but it works)
PS: this is just my personally - that looks like it would fit for me - doesnt means it fits for you too

'Junked' RSS items bug: stuck in junk mail count

I accidentally marked some RSS feed items as junk mail when I clicked the wrong button. This caused the count of unread junkmail in my junk folder to go up, but the RSS feed entries do not appear in the junk folder. Since they don't appear there, I can't mark them as read to eliminate the count of new messages, I can't move them back from the junk folder to the RSS feed, and I can't just delete them.
I have tried removing the RSS subscription from Mail, and I have tried rebuilding Mail's envelope index. Neither of these things worked, as my junk folder still has a count of 19 unread messages, even though there are no unread messages there.
So, what can I do to get rid of these phantom items?

I finally got the unread count to be removed by erasing all my junk mail (Mailbox > Erase Junk Mail). I like to keep my junk mail around for a few days just in case something I need gets put into the junk folder, so having to delete all of it wasn't ideal, but also not a big issue either.

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

Doubt about report FBL5N of screen field:Open items and Cleared items

hi
i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
but i don't know to differentiate Open Items and Cleared items in this report.
Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
or they must be calc in program ? if true what about calc rules?
waiting for help! thank you!

Hi,
Here is the difference in Open Items and Cleared Items.
In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
Hope this helps.
ashish
Message was edited by:
Ashish Gundawar

Interest calculation on Open items and cleared items

Dear Experts
I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well. But, system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator, I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
Is it possible to use same interest indicator for open line items and cleared line items of customer?
If possible, request you share the needful config steps to do same.
points will be awarded for usful reply.
Best regards,
S. Habib Pasha.

Hello Habib,
depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
Hope this is helpfull.
Best regards
Horst

Return Item and Free goods check box in purchase order

Hi Guru:
I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!

Hi,
Retun to vendor through have two types....
One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
sencond type is Retun PO..... In Po while creting the PO tick the return indication..
If you do the GR system will pick 161mopvent type.. ( GR returns)...
REgards
anand

HT2531 Spotlight lists items and shows preview images. BUT what about showing the location address of an item in my computer. Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS 10.5 was more u

Spotlight lists items and shows preview images. BUT what about showing the path/location address of an item in my computer.
Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS X 10.5 was more useful.
Old OSX Spotlight function automatically displayed path/location within the machine: e.g. desktop/folder/sub-folder/item.
Can I make Spotlight show the path?

Press option-command and the path is displayed at the bottom of the little preview window. Press command-return and the enclosing folder opens.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Problem with application item and session state

Okay, let's see if I can explain this problem coherently.
I have a small app (one page), with an application item, F_WHERE_CLAUSE.
This page has three regions in which there are items that the users can populate for search conditions. A couple of these items are "select list with submit" (I still need to upgrade to the AJAX method, I know). There is another region which has one hidden field, called P1_WHERE_CLAUSE. This field is defined to "Always, replacing any value in session state..." with source type of "Item (application or page.....", and a source value of F_WHERE_CLAUSE with no default value.
I have a button called "Search" which submits the page and fires a PL/SQL process which builds a where condition based upon the other page items and stores the value to the application item F_WHERE_CLAUSE (correctly).
For testing, I've made the P1_WHERE_CLAUSE field visible so that I can see what's going on. I've also clicked the debug and session buttons to help trace this. After I click the "Search" button and the page submits, debug shows:
0.02: ...Session State: Save "P1_WHERE_CLAUSE" - saving same value: "1=1"
followed later by:
0.05: ...Session State: Saved Item "F_WHERE_CLAUSE" New Value="lower(primary_class) = 'rock' and country = 'Spain'"
The field P1_WHERE_CLAUSE displays with the correct search criteria as signified by F_WHERE_CLAUSE above. However, If I click the "session" button to view the session state values, P1_WHERE_CLAUSE shows up as:
P1_WHERE_CLAUSE Textarea 1=1 U while F_WHERE_CLAUSE displays the correct value still.
The reason this "problem" came up, is that this page also has three SQL report regions which use &P1_WHERE_CLAUSE. for the where condition. While they display the correct results on-screen, each report region also has the "Export to csv" enabled, and the export seems to be using the "1=1" condition (from the "session" window) instead of the search criteria that the on-screen region is using (F_WHERE_CLAUSE and the displayed P1_WHERE_CLAUSE), resulting in a retreival of all records.
Anybody have any idea what's going on and why, and how to get the csv export to use the correct value for the where condition?
Thanks,
Bill Ferguson

It appears the "Export to CSV" functionality requires the item value to be set in session state. The P1_WHERE_CLAUSE item value never gets saved to session state. The page is rendered and the value is put in the item on the page but until you submit the page session state doesn't know what P1_WHERE_CLAUSE is.
Create a before header computation or process to set the value of P1_WHERE_CLAUSE (which will save it to session state). It is interesting that the report regions didn't need to look at the value in session state but the "export to csv" does.
--Jeff

Iterating through bseg line items and picking the vendor line item

Hello,
I am creating a report in which i want to show the list of vendors (with their WHT's). The output will be based on selection of a certain period(range). I guess i have to first iterate through BKPF and get those documents that lie in the given range, then i 'll have to iterate through the selected documents in BSEG and pick out the vendor line items (KOART = 'S'). Will i be using GET for this..
Is this the right way? secondly, if yes, can sumone show me how to iterate through BKPF and BSEG and get vendor details.?
Thanks..
SHehryar

Hey,
Instead of selecting data from BKPF-BSEG you could use BKPF-BSIK-BSAK.
BSIK and BSAK have the same details as BSEG and are use by SAP for reporting purposes.
Similarly for customer the table are BSID, BSAD and for GL the tables are BSIS and BSAS.
BSIK will have the open items and BSAK will have the cleared items.
-Kiran

FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Hi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas.

Rss; item and channel glitch

Similar Messages

Maybe you are looking for