RT Extreme, Does not seem to Extreme

Ok So after the rest of my problems seems to be fixed i sorta run into a small confusing problem.
Anyway, I was just confused about the RT Extreme, I am cutting a DV from a HD camera and have realized i have been rendering. It does not let me use the RT Extreme to playback Real-time effects in the best quililty. Any ideas?, should there be settings i might have wrong? will RT extreme work in DV?
Running FCP 5

DV from an HD camera...is this HDV material, or HDV downconverted to DV thru the camera and captured as DV? What are your project settings? Did you use the Easy Setups?
And 512MB RAM? That is not nearly enough for FCP. That might be a part of your issue right there. You need at least 1GB, and I suggest a minimum of 1.5 GB - 2 GB.
Shane

Similar Messages

The master extreme does not seem to be able to accept wireless clients.

I have a roaming network setup with several extremes/express devices. The probem I am having is the master extreme which is in the garage does not want to accept new wireless clients. I have 3 other devices which work just fine. They hand off clients as you move around the house. You can see the wireless network on your device and when you select it you get a pop up window prompting you for the password??? You enter the passwork/key and nothing seems to happen.

Yes all of my base stations have the same network name, same password and same security setting. I have Comcast as my network provider. I have the latest airport extreme connected directly to the cable modem in the garage. I have 2 other base stations of the previous verison in house. One in my office and one in the living room. If I am moving around in the house I can use the airport utilitiy to look at those base stations and see which wireless clients they have. If I go out into the garage and try and connect to the wireless network the device appears to be trying (spinning dial icon) and then comes back with the pop up requesting a password. I have tried entering it and again it will appear to try and connect for a few seconds and then the pop up will appear again. I I walk into the house the device will connect with one of the other base stations.
Also all of the base stations are connected via ethernet cable to the main base station in the garage. They are connected directly with no switch or router between them.

I have just downloaded a copy of Photoshop and Adobe Bridge CS4 onto a second laptop I recently purchased. However the font size of the menu bar/tool bars is extremely small. My other laptop also has a copy of CS4 but it does not have the extremely small

I have just downloaded a copy of Photoshop and Adobe Bridge CS4 onto a second laptop I recently purchased. However the font size of the menu bar/tool bars is extremely small. My other laptop also has a copy of CS4 but it does not have the extremely small font size. Could you please tell me how to increase the font size in the menu/tool bars?

You can't. Any version before Creative Cloud does not support high-DPI displays and that is just that. If you cannot adjust the system's screen resolution and so on, then there is nothing you can do.
Mylenium

WDS does not seem to increase strength of my network

Hi all, I have an older flying saucer Airport Extreme a/b/g (think it is snow model it has two ethernet ports and usb but no phone connection about 6 years old) and also a new Airport express b/g/n about 1 year old.
When I first bought the express I tried to use airport utility to extend the network but after a lot of messing about and hours on phone to apple support I discovered that I could not. It was not the end of the world as I was able to join existing network and stream airtunes to hifi in living room but the signal strength in the kitchen was pretty low which was slightly disappointing, my iphone often struggles to get a wifi signal in the kitchen.
I was recently researching some options for my dad and saw a new apple knowledge base article about wds. I downloaded the Graphite Snow update for my airport extreme and followed these instructions http://support.apple.com/kb/HT4262 that let me set up a wds network. I have extreme as main base station, fed by ethernet from my cable modem and the express as a wireless remote. I get a green light on the express and can stream airtunes and access with all my machines. However the WDS does not seem to have increased the signal strength in the Kitchen.
The airport express is in the living room 10m kitchen with no walls between but I still only get around 40% signal, in fact even if I unplug the extreme I get the same around 40% signal. Does this sound wrong?
This suggests that although I get a green light on the express the WDS is not helping.
Should I just go back to the original set up of extreme as main base station and express simply joining network as I have read that WDS slows down the network. If I get no signal boost then I don't want to also lose 50% speed on the network!
Thanks for any replies...
Minskybabs.
powerbook G4 1.25Ghz running OSx 10.4.11, macbook 2Ghz Intel core duo running 10.4.11 also a work pc lenovo laptop running xp.
Airport Extreme (Snow model I think) Airport express (latest n model)

try this:
system preferences - network - advanced - under preferred network - highlight your network and hit the minus sign to delete it.
now, hit the plus sign to detect your network again - then enter your password again when it asks for it....
see if that works for you.
good luck

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
I Want to download i0s 5
i have ipod touch 3rd gen

You need to connect your iPod to iTunes on a computer and update from there.
Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
Please note that iPod 3d generation only goes up to iOS 5.1.1
To update the iPod, use: http://support.apple.com/kb/ht4623
scroll down to the part that's about updating with iTunes.
Good luck
Stijn
Message was edited by: jesterwylde

I had upgraded to FF 4.0.1 a while ago. Last night I got a bubble telling me that FF 4.1.0 was available and I should download and install. This version does not seem to exist. What is this about?

I had installed FF 4.0.1 and have been using it for a while. I am running Win XP Pro, SP2. Last night a messge came up informing me that FF 4.1 was now available and that it would be advisable to download and install it. I did this and everything seemed to work fine but when I look at the 'About Firefox' info under 'Help' it still tells me that I am running 4.0.1. Everything still seems to be functioning well but this disturbs me as it does not seem to have been a FF message. Can you please tell me if such a message was sent out, and if so, why, seeing as the version does not seem to have changed?

To ensure that no malicious software has been installed, try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* Malwarebytes - http://www.malwarebytes.org/mbam.php
* SuperAntiSpyware - http://www.superantispyware.com
* Ad-Aware - http://www.lavasoft.com/products/ad_aware_free.php
* Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot S&D - http://www.safer-networking.org/en/home/index.html

Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
Thanks Bazzer50

Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

Dynamic hyperlink does not seem to work

Hi,
It looks like this same issue came up before in <
Dynamic hyperlink in Word 2003 but it does not appear that anyone ever responded.
My customer has created a dynamic hyperlink using {VM_URL} but when the template saves if you mouse over the hyperlink, you see a reference to the current location example:
file:///E:\temp\%7bVM_URL%7d
The xml data template looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<ContractDetails>
<kid>238335</kid><usr>[email protected]</usr>
<LIST_HDR>
<HDR>
<USER_PWD>4</USER_PWD>
<USER_SSO>[email protected]</USER_SSO>
<VM_URL>http://ora-apps-phnx-1.vmware.com:8000/oa_servlets/oracle.apps.fnd.sso.AppsLogin?requestUrl=APPSHOMEPAGE&cancelUrl=http%3A%2F%2Fora-apps-phnx-1.vmware.com%3A8000%2Foa_servlets%2Foracle.apps.fnd.sso.AppsLogin</VM_URL>
The hyperlink in the pdf then becomes the original path to the document:
E:\tmp
I have found a couple of issues in WebIV, one was a position loop problem and another was an absolute xpath issue, but this does not seem to fit either. I played a little with the link and url setting, but no luck.
Tried in 5.6.3 and Word 2k2
Any help would be appreciated.
Thank You,
Dale

I am facing the same problem,
Please can anyone give pointers to this?
Regards,
Amit Deshpande

HT204350 I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.

I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
Mike

A PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Blog summary does not seem to update online

I've just updated a blog I've created for a musician friend of mine; it's been done on iweb 3.0.2 & published via ftp using godaddy: http://lauramoodymusic.com/lmm/news/news.html
However, the main blog summary which is correct on iweb, and the version published to a local folder, is not updating online. The new blogs are visible if you go to the archive, and by clicking on the RSS feed, but not from this front page... I've tried to republish all the relevant pages again, manually, but this doesn't seem to have worked either.
Help urgently needed.
thank you.

+Noticing how disorganised the iTunes Lib is, I spent a lot of time today adding and editing mp3 tag data so that iTunes would look more logical.+
+However it does not seem to pull in or update to what I have on my hard drive!+
iTunes does not read the tags until you select/play a track. It stores the tag information in its library file and this will not reflect changes made to tags with an external editor until iTunes looks at the track.
You can force iTunes to re-read all the tags by selecting all the tracks in your library, right clicking in the selection and choosing get info.
It is essential that you do nothing except click "OK" as any change you make would be applied to every track in your library.
Depending on the size of your library iTunes may take a while to complete the task.
It is always advisable to have your library backed up in case you make a mistake.

My iPhoto library has suddenly disappeared from my computer. When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist

My iPhoto library has suddenly disappeared from my computer.
When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist anymore. I did not have time machine set up, so there is no back up. Is there any way i can retrieve my library?
Here is a picture of what appears when i click on iPhoto:

In terms of searching i have searched for photos on my finder. However, none of the photos that appear are from my iPhoto Library.
Search with FindAnyFile. You can download it here: http://apps.tempel.org/FindAnyFile/index.php
Search for any file with "ThumbJPGSegment" in the name. If you added at least one image to your library, the library should contain a file with this name, see OldToad's post: Re: Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it?

HT1040 why can i not seem to order more than one print at a time, which obviously becomes expensive with the shipping, it does not seem to offer me the facility to choose again?

why can i not seem to order more than one print at a time, which of course becomes expensive with shipping, it does not seem to offer me the facility to choose again? either order or cancel!

make an album containing the photos you wnat to print, select all photos in the album and order
LN

RT Extreme, Does not seem to Extreme

Similar Messages

Maybe you are looking for