RTLS best practices for outdoor environments

Hi there,
I was curious as to what the requirements are for outdoor location based services are. Do the indoor best practices apply to outdoor environments? As in APs located 40 - 70 feet apart, clients heard at -75 dbM @ 3 APs etc etc.
I have a client that we surveyed using these specs and 1532i APs. However they now running fibre outdoors so we are thinking 1552i models to accommodate. However I can't find the Tx power levels to know if the 1552i could emit a cell size small enough.
Any advice?
-Brett

If you look at the data sheet for both models, the maximum transmit power is close. So lowering the TX power would be the same on both models.
-Scott

Similar Messages

Best practices for development / production environments

Our current scenario:
We have one production database server containing the APEX development install, plus all production data.
We have one development server that is cloned nightly (via RMAN duplicate) from production. It therefore also contains a full APEX development environment, and all our production data, albeit 1 day old.
Our desired scenario:
We want to convert the production database to a runtime only environment.
We want to be able to develop in the test environment, but since this is an RMAN duplicated database, every night the runtime APEX will overlay it, and the production versions of the apps will overlay. However, we still want to have up to date data against which to develop.
Questions: What is best practice for this sort of thing? We've considered a couple options:
1.) Find a way to clone the database (RMAN or something else), that will leave the existing APEX environment intact? If such is doable, we can modify our nightly refresh procedure to refresh the data, but not APEX.
2.) Move apex (in both prod and dev environments) to a separate database containing only APEX, and use DBLINKS to point to the data in both cases. The nightly refresh would only refresh the data and the APEX database would be unaffected. This would require rewriting all apps to use DBLINKS though, as well as requiring a change to the code when moving to production (i.e. modify the DBLINK to the production value)
3.) Require the developers to export their apps when done for the day, and reimport the following morning. This would leave the RMAN duplication process unchanged, and would add a manual step which the developers loath.
We basically have two mutually exclusive requirements - refresh the database nightly for the sake of fresh data, but don't refresh the database ever for the sake of the APEX environment.
Again, any suggestions on best practices would be helpful.
Thanks,
Bill Johnson

Bill,
To clarify, you do have the ability to export/import, happily, at the application level. The issue is that if you have an application that consist of more than a couple of pages, you will find yourself in a situation where changes to page 3 are tested and ready but, changes to pages 2, 5 and 6 are still in various stages of development. You will need to get the change for page 5 in to resolve a critical production issue. How do you do this without sending pages 2, 5 and 6 in their current state if you have to move the application all at once??? The issue is that you absolutely are going to need to version control at the page level, not at the application level.
Moreover, the only supported way of exporting items is via the GUI. While practically everyone doing serious APEX development has gone on to either PL/SQL or Utility hacks, Oracle still will not release a supported method for doing this. I have no idea why this would be...maybe one of the developers would care to comment on the matter. Obviously, if you want to automate, you will have to accept this caveat.
As to which version of the backend source control tool you use, the short answer is that it really doesn't matter. As far as the VC system is concerned, you APEX exports are simply files. Some versioning systems allow promotion of code through various SDLC stages. I am not sure about GIT in particular but, if it doesn't support this directly, you could always mimic the behavior with multiple repositories. Taht is, create a development repository into which you automatically update via exports every night. Whenever particular changes are promoted to production, you can at that time export form the development repository and into the production. You could, of course, create as many of these "stops" as necessary to mirror your shop's SDLC stages, e.g. dev, qa, intergation, staging, production etc.
-Joe
Edited by: Joe Upshaw on Feb 5, 2013 10:31 AM

Best practice for mouseless ADF applications

I am developing an ADF application where the users do not want to use the mouse.
So I would like to know if there are a best practice for this?
I am already using the accessKey functionality and subforms defaultCommand
But I have had problems setting focus to objects on a page like tables. I would like a button to return the focus to the table after it has made the command like delete.
I have implemented a solution where I have found inspiration several threads and other webpages (see below).
Is this solution okay?
Are there any problems with it?
I would also like to know if there are better pathways to go like
out of the box solutions,
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
in advance thanks
Inspiration webpages
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
how to Commit table by writting Java code in Managed Bean?
Table does not refresh and getting error as UIComponent is Null
A short description of the solution:
(jdeveloper version 11.1.1.2.0)
--- Example where I use onSetFocus in jsff page
<af:commandButton text="#{hrsusuiBundle.FOCUS}" id="cb10"
partialSubmit="true" accessKey="f"
shortDesc="Alt+Shift+F"
actionListener="#{managedBean_clientUtils.onSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
</af:commandButton>
--- Examples where I use doTableActionAndSetFocus in jsff page
--- There have to be a binding in the jsff page to delete, commit and rollback
<af:commandButton text="#{hrsusuiBundle.DELETE}" id="cb4"
accessKey="x"
shortDesc="Alt+Shift+X"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Delete"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.COMMIT}" id="cb5"
accessKey="s" shortDesc="Alt+Shift+S"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Commit"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.ROLLBACK}" id="cb6"
accessKey="z" shortDesc="Alt+Shift+Z"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}"
immediate="true">
<af:resetActionListener/>
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Rollback"/>
</af:commandButton>
--- This is the java class I use
--- It is published in adfc-config.xml as a request scope managedbean
public class ClientUtils {
public ClientUtils() {
public void doTableActionAndSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String actionToDo = (String)rcb.getAttributes().get("actionField");
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(focusOn);
clientId = component.getClientId(JSFUtils.getFacesContext());
if ( "Delete".equals(actionToDo) || "Commit".equals(actionToDo) || "Rollback".equals(actionToDo) ){
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operationBinding = bindings.getOperationBinding(actionToDo);
Object result = operationBinding.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(component);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
public static String onSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String clientId = null;
if (focusOn.contains(":")) {
clientId = focusOn;
} else {
clientId = findComponentsClientIdInRoot(focusOn);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
return null;
private static void writeJavaScriptToClient(String script) {
FacesContext fctx = FacesContext.getCurrentInstance();
ExtendedRenderKitService erks = null;
erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
erks.addScript(fctx, script);
public static void makeSetFocusJavaScript(String clientId) {
if (clientId != null) {
StringBuilder script = new StringBuilder();
//use client id to ensure component is found if located in
//naming container
script.append("var textInput = ");
script.append("AdfPage.PAGE.findComponentByAbsoluteId");
script.append ("('"+clientId+"');");
script.append("if(textInput != null){");
script.append("textInput.focus();");
script.append("}");
writeJavaScriptToClient(script.toString());
public static String findComponentsClientIdInRoot(String id) {
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(id);
clientId = component.getClientId(JSFUtils.getFacesContext());
return clientId;
}

Hi,
I am developing an ADF application where the users do not want to use the mouse. So I would like to know if there are a best practice for this?
Well HTML (and this is the user interface you see) follows a tab index navigation that you follow with "tab" and "shift+tab". Anything else is a short cut for which you use mnemonics (as you already do) or shortcuts (explained in http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html). There is a distinction to make between non-web environments (which I think you and your users have abackground in) and client desktop environments. Browsers block some keyboard functionality for their own purpose. So you may have to find a list of keys first that work across browsers. Unlike desktop clients, which allow you to "press a button" without the button to take focus, this cannot be done on the web. So you need to be clever here, avoiding buttons at all.
The following paper is about JavaScript in ADF and explains the basics for what Chris Muir explains in : http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
It has the outline for how to register short cut keys that perform a specific action (e.g. register ctrl+d to delete the current row you are on, or press F11 to execute a query (similar to Oracle Forms frmres files)). However, be aware that this includes some code you have to write (actually quite some code to be honest).
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
Actually these are implementations as they come with example code for you to use and customize, do they? So what is this question asking for more ? Also note that global buttons don't quite have anything in common with the question you asked. I assume you want to see it as an implementation of the Forms toolbar that operates on the form or table the focus is in. This however does not work for the web as there is nothing that keeps track of which component has a focus and to what iterator (data block) it belongs. This would involve even more coding (though possibly doable)
Frank

What are best practice for packaging and deploying j2EE apps to iAS?

We've been running a set of J2EE applications on a pair of iAS SP1b for about a year and it has been quite stable.
Recently however we have had a number of LDAP issues, particularly when registering and unregistering applications (registering ear files sometimes fails 1st time but may work 2nd time). Also We've noticed very occasionally that old versions of classes sometimes find their way onto our machines.
What is considered to be best practice in terms of packaging and deployment, specifically:
1) Packaging - using the deployTool that comes with iAS6 SP1b to package is a big manual task, especially when you have 200+ jsp files. Are people out there using this or are they scripting it with a build tool such as Ant?
2) Deploying an existing application to multiple iAS's. Are you guys unregistering old application then reregistering new application? Are you shutting down iAS whilst doing the deployment?
3) Deploying ear files can take 5 to 10 mins, is this normal?
4) In a clustered scenario where HTTPSession is shared what are the consequences of doing deployments to data stored in session?
thanks in asvance for your replies
Owen

You may want to consider upgrading your application server environment to a newer service pack. There are numerous enhancements involving the deployment tool and run time layout of your application that make clear where you're application is loading its files from.
If you've at a long running application server environment, with lots of deployments under your belt, you might start to notice slow downs in deployment and kjs start time. Generally this is due to garbage collecting in your iAS registry.
You can do several things to resolve this. The most complete solution is to reinstall the application server. This will guarantee a clean ldap registry. Of course you've got to restablish your configurations and redeploy your applications. When done, backup your application server install space with the application server and directory server off. You can use this backup to return to a known configuation at some future time.
For the second method: <B>BE CAREFUL - BACKUP FIRST</B>
There is a more exhaustive solution that involves examining your deployed components to determine the active GUIDS. You then search the NameTrans section of the registry searching for Applogic Servlet *, and Bean * entries that represent your previously deployed components but are represented in the set of deployed GUIDs. Record these older GUIDs, remove them from ClassImp and ClassDef. Finally remove the older entries from NameTrans.
Best practices for deployment depend on your particular environmental needs. Many people utilize ANT as a build tool. In later versions of the application server, complete ANT scripts are included that address compiling, assembly and deployment. Ant 1.4 includes iAS specific targets and general J2EE targets. There are iAS specific targets that can be utilized with the 1.3 version. Specialized build targets are not required however to deploy to iAS.
Newer versions of the deployment tool allow you to specify that JSPs are not to be registered automatically. This can be significant if deployment times lag. Registered JSP's however benefit more fully from the services that iAS offers.
2) In general it is better to undeploy then redeploy. However, if you know that you're not changing GUIDs, recreating an existing application with new GUIDs, or removing registered components, you may avoid the undeploy phase.
If you shut down the KJS processes during deployment you can eliminate some addition workload on the LDAP server which really gets pounded during deployment. This is because the KJS processes detect changes and do registry loads to repopulate their caches. This can happen many times during a deployment and does not provide any benefit.
3) Deploying can be a lengthy process. There have been improvements in that performance from service pack to service pack but unfortunately you wont see dramatic drops in deployment times.
One thing you can do to reduce deployment times is to understand the type of deployment. If you have not manipulated your deployment descriptors in any way, then there is no need to deploy. Simply drop your newer bits in to the run time space of the application server. In later service packs this means exploding the package (ear,war, or jar) in to the appropriate subdirectory of the APPS directory.
4) If you've changed the classes of objects that have been placed in HTTPSession, you may find that you can no longer utilize those objects. For that reason, it is suggested that objects placed in session be kept as simple as possible in order to minimize this effect. In general however, is not a good idea to change a web application during the life span of a session.

Best practice for the test environment & DBA plan Activities Documents

Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PM

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

Query Best Practice for Reports

I am new to Apex and I am wondering what is the best practice for store your sql quries for reports. I am a believer of storing all sql behind pacakge functions or procedures. And it looks like the only options for report pages are to use a direct SQL query, or a function that returns a query as a string. Yes the function method counts as putting the code in Oracle but not really. It is still getting compiled and parsed on the Apex side. It would be nice if Apex could handle a cursor but I have read that it doesn't directly. You have to have a function that returns a cursor and then create a pipelined function that calls the cursor function. That is kind of silly. Is there some other way to do this?
Apex 4.2
Oracle 11.2.0.2
Thanks for any input.
Jeff

Hi Jeff,
I'm not necessarily a believer in packaging queries. I'm a little more pragmatic in that I believe it may make sense in environments where you have a client environment that just expects a result set that is then manipulated by the client for the purposes of presentation, pagination etc. Apex has a different architecture in that the client is purely an HTML presentation layer (browser) and the presentation, pagination etc is formulated in the database along with the data using the Oracle web toolkit, which is a set of internal packages that produce HTML. Note that handling and manipulating ref cursors inside PL/SQL is not a joy, they were mainly designed to be passed out to external clients. (Often to shield programmers who don't or won't even try to understand relational concepts)
This means that when you create a report based on a query, the Apex engine will manipulate that base query, depending on the display requirements and pagination requirements of your report, before it submits that query to the database for execution. To get an idea of how this manipulation occurs, you can run your report in debug mode and check the actual query that is submitted to the database. If the query is presented as an already executed ref cursor, then the Apex engine can't execute in the way that it does. As you have already found out, the only way of using packaged queries returning ref cursors is by the use of a pipelined function, so that the Apex engine can treat the result as a normal query.
This is the architecture of Apex, and I suspect that re-engineering the Apex engine to handle ref cursors natively, as opposed to using a pipelining trick, would be a considerable change. I hope this at least helps to explain why ref cursors and Apex don't mix. I personally don't see the purpose of having an abstraction layer of packaged queries below an abstraction layer of an API such as Apex. SQL is a perfectly good API.
Regards
Andre

Best practice for limiting network management to few devices

Hello ,
I have set up a very basic security implementation that is no way realistic, but I just want to experiment and learn...
In my 1801 router that answers DHCP requests on separate wired and wireless vlans, I have bound static IP addresses to the MAC addresses of my laptop wireless and wired interfaces.
Then I set up an ACL to permit inbound traffic from these IPs only for the vty lines.
Obviously this is easily defeated by statically assigning these same IPs to any device on the network, so I was thinking about a better way to limit management of the router to a few devices.
What is the best practice in professional environments?
Thanks.

Obviously this is easily defeated by statically assigning these same IPs to any device on the network, so I was thinking about a better way to limit management of the router to a few devices.
TACACs or RADIUS with robust password policy and regular interval to change the passwords (30 to 45 days).
Read this and go to the "Composing hard-to-guess passwords" section.

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Best practice for promoting roles

I would like to know what is the best practices for promoting Administrative and/or normal Roles between environments. If I make a change to the capabilities of a role, I'd rather not create a whole new build if I didn't have to. Would exporting from debug, and importing via 'lh import' suffice, or is there an easier/better method?
Thanks

Hello,
I'd ask in the Windows forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Best Practices for Staging

Hey Guys!
We are currently evaluating Oracle Enterprise Pack for Eclipse with one of our new projects.
As we are moving from development phase to QA, we are looking for ways to standardize the staging process. Up to now we were unable to figure out how or where OEPE creates the artifacts (war & ear files) before they are deployed to the remote target environment (Weblogic Server) for tests during development. We had assumed that OEPE uses a simple ANT file or something similar we could use for our staging environments.
Is there a Best Practice for Staging? What does Oracle recommend?
Thanks in advance - Alex

Hi,
According to your post, my understanding is that you wanted to know the best practices to deploy SharePoint Portal in different SharePoint environment.
If the site is not existing in the production server, we can save the site from the development server, and then import it to the production server.
But if the site is already existing in the production server, we should follow these steps to just add the taxonomy and content types to the production server:
Save the site from Dev as a template
Import the template as solution in Visual Studio
Remove unnecessary items from the solution(Please pay more attention on it. If a content type/list... in the solution is existing in the production site too, it will replace the
same object existing in the production after deployment)
Package the solution
Deploy the solution in the production
For more detailed, please see:
http://ahmedmadany.wordpress.com/2012/12/30/importing-sharepoint-solution-package-wsp-into-visual-studio-2010/
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/7dcf61a8-1af2-4f83-a04c-ff6c439e8268/best-practices-guide-for-deploying-sharepoint-2010-from-dev-to-test-to-production?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Best practice for intervlan routing?

are there some best practices for intervlan routing ?
I've been reading allot and I have seen these scenarios
router on a stick
intervlan at core layer
intervlan at distribution layer.
or is intervlan needed at all if the switches will do the routing?
I've done all of the above but I just want to know what's current.

The simple answer is it depends because there is no one right solution for everyone.
So there are no specific best practices. For example in a small setup where you may only need a couple of vlans you could use a L2 switch connected to a router or firewall using subinterfaces to route between the vlans.
But that is not a scalable solution. The commonest approach in any network where there are multiple vlans is to use L3 switches to do this. This could be a pair of switches interconnected and using HSRP/GLBP/VRRP for the vlans or it could be stacked switches/VSS etc. You would then dual connect your access layer switches to them.
In terms of core/distro/access layer in general if you have separate switches performing each function you would have the inter vlan routing done on the distribution switches for all the vlans on the access layer switches. The core switches would be used to route between the disribution switches and other devices eg. WAN routers, firewalls, maybe other distribution switch pairs.
Again, generally speaking, you may well not need vlans on the core switches at all ie. you can simply use routed links between the core switches and everything else.
The above is quite a common setup but there are variations eg. -
1) a collapsed core design where the core and distribution switches are the same pair. For a single building with maybe a WAN connection plus internet this is quite a common design because having a completely separate core is usually quite hard to justify in terms of cost etc.
2) a routed access layer. Here the access layer switches are L3 and the vlans are routed at the access layer. In this instance you may not not even need vlans on the distribution switches although again to save cost often servers are deployed onto those switches so you may.
So a lot of it comes down to the size of the network and the budget involved as to which solution you go with.
All of the above is really concerned with non DC environments.
In the DC the traditional core/distro or aggregation/access layer was also used and still is widely deployed but in relatively recent times new designs and technologies are changing the environment which could have a big impact on vlans.
It's mainly to do with network virtualisation, where the vlans are defined and where they are not only routed but where the network services such as firewalling, load balancing etc. are performed.
It's quite a big subject so i didn't want to confuse the general answer by going into it but feel free to ask if you want more details.
Jon

Enterpise Best Practices for iPad

Is anyone aware of any documentation idnetifying best practices for securely deploying iPads in an enterprise environment?

There is some information out there, though not as much as I think we are typically used to for enterprise environments. (It is a consumer device, and Apple is a consumer-driven company, and I don't fault them for that one bit.)
Here is some documentation from Apple:
http://www.apple.com/support/ipad/enterprise/
Also, Jamf Software has some information regarding their Casper suite.
We don't use it yet at my workplace, but I have heard good things about them.
http://www.jamfsoftware.com/solutions/mobile-device-management
Edit:
And welcome to the forums!
Message was edited by: tibor.moldovan

Export and Deployment - Best Practices for RAR and CUP

Hi Experts,
I wanted to know what in your opinon is best practice for deployment for GRC for a 3 system landscape.
We have a development landscape which connacts to all our environments - Dev-QA-Prod.
Is it recommended to have just the production client connected to the prodiction boxes only and use Dev/ QA for other environments or is it a good idea to have Prod and QA in sync?
In my opinion it looks like a good idea to have the same QA and PROD as it would make export easier.. Maybe I am worng..
What according to you all is a good recommended practice here?
Thanks,
Chinmaya

Hi Chinmaya,
depends how many clusters you have in your landscape
if it is something like 5 DEV box to connect 5 QAS boxes, so on
then best practice will be to have separate DEV - QAS - PRD boxes for GRC if money (h/w ) is no constraint for organization
rather than later asking SAP for deletion scripts for deleting sandbox or dev connectors,
best to have separate boxes for each
also for future whenever you do rule changes in RAR and config changes in CUP, best to test in QAS first, as CUP will become very critical for your organization, post go-live
and good part will be that management report will reflect true data for PRD only
regards,
Surpreet

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

RTLS best practices for outdoor environments

Similar Messages

Maybe you are looking for