RTMT - Multiple Installs, Same version?

Hello,
I've done some reading about mutiple installs of RTMT but can't get it to work right. All of our UC Products are at 8.x. They all seem to use the same version of RTMT. When I try to use the version that was downloaded from Presence, I get an error on the other products. When I try to install from one of the other systems, it makes me Uninstall the previous version.
We have:
CUCM 8.x
CUC 8.x
UCCX 8.x
CUPS 8.x
I've specified different folders but it still doesn't help. Any ideas?
Thanks!

Check this link: Not able to install different RTMT clients on the same box
http://docwiki.cisco.com/wiki/Not_able_to_install_different_RTMT_clients_on_the_same_box
Hope this will help.....

Similar Messages

Communication lost - Same installation, same version of client (.exe), but client has different configuration in Configuration Manager properties

Hi, I can't understand how I get the following different between old and newly installed client. On the left side it is the original client configuration and on the right side it is what client gets after installing the same version of CCMSETUP.EXE (5.00.7958.1000)
with SCCM 2012 R2.
Differences noticed:
-Catalog's name (in Software center) are different. New client has "IT Ogarnization" as name for their catalog.
-Configuration Manager Properties for new client doesn't have "Configurations" Tab.
-Many Components status in the components tab are different: CCM Notification Agent, Compliance and Settings Managment, Hardware Inventory Agent, Out of Band Mangement Agent...
With all this, I can't send Windows updates or any applications to ANY clients. The client status in the monitoring deployment always shows "Unknown".
I don't think it is on the client side, because I return to older VMware snapshot and see the different, after uninstalled and re-installed the SCCM agent, I get the new "problematic" client configuration.
Any suggestion to resolve my problem? Thank you in advance.
bsuperkid

Here the all three logs. Sorry to give them like that but I think it is best way to let you take a look. I did change some name and reference to hide my environment.
Also, I don't know if there a link with my problem, but I guess so.
- I noticed in Monitoring\System Status\Components Status\"Warning SMS_WSUS_SYNC_MANAGER", the following message (ID 6703):
WSUS Synchronization failed.
Message: Thread was being aborted.
Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS.
- I noticed in Monitoring\System Status\Components Status\ "Warning SMS_AD_SYSTEM_DISCOVERY_AGENT", the following message (ID 5203):
Active Directory System Discovery Agent reported errors for 2074 objects. DDRs were generated for 0 objects that had errors while reading non-critical properties. DDRs were not generated for 2074 objects that had errors while reading
critical properties.
Possible cause: The site server might not have access to some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked.
Refer to the discovery logs for more information.
I'll upload a print screen of all three logs files. If you need it in text format, I'll upload them as the code Block.
Thank you again!
bsuperkid

How can I open multiple instances of the same version of FF?

I understand that if I have multiple profiles, I can run different versions of FF side-by-side (like 3.6 and 4).
However, what I'm interested in is how I can launch multiple instances of the same version of FF (4, for instance) using the same profile. In other words, I want to be able to double-click the desktop icon for FF, and open a new instance, and keep doing that as many times as I want. I don't want to have a different icon and profile for each instance (too much overhead to keep a dozen+ profiles in sync).
I can always launch one FF window instance, and then keep clicking ctrl+N to launch new instances from inside it, which they all share the same profile (as I want). So, basically, I want to be able to do that from my desktop icon, rather than by having to do it with the keyboard ctrl+N sequence.

But I don't understand why whatever Firefox does when you click ctrl+N can't also be done (with some sort of command-line switch) from a desktop icon?
In other words, I clearly can create many FF instances (even if they are the same FF.exe process) by doing ctrl+n a bunch of times. Why then can't this behavior be done from a desktop icon with some parameters?
As far as I know, FF is the only browser that doesn't directly allow multiple browser instances from desktop icons. IE, Chrome, Safari, Opera, etc... all let me launch a new instance (even if they are all single process and the instances are shared within the process).

Grub2 multiple installs on same pc

Hi friends, can we have multiple installations of grub2 on the same pc on different partitions ( not the MBR ) ?
For example , I have three partitions:
1) /dev/sda4 (500 MB)
2) /dev/sda5 (500 MB)
3) /dev/sda6 (500 MB)
can i install grub2 on all the above partitions at same time ?
Many thanks.

If you install each distro's GRUB2 to the MBR, but each install will overwrite the previous. You can use configfile to boot the other partitions. In arch anyway, you can use grub-install to reinstall arch's GRUB2 to the MBR. AFAIK, this should work with other distros as well. You have to chroot into arch then run grub-install to do this.
https://wiki.archlinux.org/index.php/Change_Root
https://wiki.archlinux.org/index.php/GR … ode_region
See the following Fedora bug report thread for some more info on configfile (particularly comment #23 and #25)..
https://bugzilla.redhat.com/show_bug.cgi?id=872826
It is not recommended to install GRUB2 to a partition...

Can multiple installs of BIPE share same repository?

Hello folks,
I work with EnterpriseOne (E1) and in its latest foundation Oracle released what is called Data Access Driver that allows JDBC connection between BI Publisher Enterprise and EnterpriseOne databases. One characteristic of this JDBC driver is that its initialization files are copied to the BIPE directory structure. The driver allows BIPE to connect to only one EnterpriseOne data source. As far as I know to allow BIPE to connect to a different E1 data source, one would need a separate BIPE install altogether.
Question: Is it possible to have multiple installs of BIPE and have them share the SAME report repository and users?
Thanks
-James Owens

Hi Tim,
When E1 Data Access Driver (DAD) is installed in BIPE, .jar and .ini files are copied to "x:\OraHome_BIT\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib" folder. In tests, I found that in order for BIPE to connect to E1 data sources using DAD, there must be a match between E1 environment settings in one of these ini files (jdbj.ini) and the JDBC connection defined in BIPE. When there is a mismatch the following error will appear in BIPE console window:
"WARNING url mismatchjdbc:oracle:enterpriseone://JDV812"
and DAD debug log will show:
"Requesting a spec in path code and using serialized objects build for path code ...
Unable to get initialize UserSession java.lang.NullPointerException"
In none of my tests I was able to connect to an E1 datasource different than the one set in the jdbj.ini file stored in .../WEB-INF/lib. So even if I create a new JDBC connection in BIPE pointing to a different E1 datasource (environment in E1 lingo), that connection would still rely on the Data Access Driver that reads its configuration from the same jdbj.ini where there will be an environment mismatch.
- James

Multiple installs of runtime engine?

Are there any problems with multiple installs of LabVIEW 7.0 runtime engine.
That is, if I create an executable application with the runtime engine installer present and distribute it to a person who already has the 7.0 runtime engine installed, does this present any problems? Will the runtime engine actually be installed the second time? Will there be multiple entries in the Windows add/remove list?

The installer is designed to work that way. Multiple installs of the same version of the runtime engine should only increment the reference count on the files. When you install your built application you will not see an entry for the runtime engine in the Add/Remove Programs (ARP) list.
If you are familiar with MSI terminology, this behaviour is because the LV RTE that is included in your installer is just the merge module not the MSI. When you install the LV development environment, the RTE is installed from a separate MSI. Because your built app installer will use the merge module, the only way to uninstall the RTE will be by uninstalling your app.
Naren

Pre Build EXE and Installer Set Version

So this topic comes up relatively often so I thought I'd make a new thread showing an example of how to make it work. The problem is developers want a way to set the version of builds programmatically. Luckily NI added some VIs for doing this. Too bad you can't invoke them from the Pre-Build action of a build, because that information is read before the pre-build. Here is an idea exchange discussing it.
But I figured I could come with some kind of work around and I have two, and neither is perfect. Attached is a simple project. It contains a VI that runs reading the EXE version that it is running from once it is in an EXE. The project has three build specifications, an EXE, and two installers. The developer can set the Major, Minor, and Fix of the EXE, but the build version is set programmatically in the Pre-Build action. The version of the installers will also be set to the version of the EXE.
Attempt to build the EXE and a dialog will appear asking to enter the build version that should be used. This could be determined some other way but this was the easiest for the demo. If the EXE, and the Installers are already the correct version, where the build is the same as the one specified, and the installers are the same version as the EXE, then the build goes on like normal. But if the build you enter is not the same as the current, it will abort the current build, change the versions, and then tell the operator to attempt to build again. This time no prompt is seen and the build will work like normal with the version you set earlier.
The downside to this method is you have to tell the developer to build again, I figured I could do that programmatically so I tried. There is a constant on the BD of Prebuild Action VI.vi, and if it is set to True it will try to invoke a new build on its own. The problem with this method is the build the user invoked is aborted and the user sees the error. But the second build might have worked fine, but there isn't any feedback.
In any case this is a sorta working way of setting EXE and Installer build versions from a pre-build VI.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Test EXE Version.zip ‏80 KB

Bob_Schor wrote:
I took your idea and "simplified" it a little
Some may want the simplified version I understand. But for me I wanted a more robust VI, one that would work if a project had multiple build specifications of applications, or multiple installers. Some developers may have two applications one that is normal, and another with debugging turned on and I wanted the versioning to work consistently there by grabbing the newest version and using it. And in all my cases, if there is an installer it should be the same version as the EXE.
As for the getting around the error I think if I had enought time I could dig into the NI VIs to get rid of the error and show the progress of the new build. The whole build process is a bunch of VIs, that augment the right click menus in the project so the source is there it is just taking time to understand it.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Plugins that i know are compatible in version 7.0.1 are reporting as not compatible when i try and install then in the same version running inside of VMware.

Greetings ..
I am trying to run Firefox inside of VMware Workstation V8 in Widows 7 and Fusion V4 in Mac OS X 10.7.2.
I first tried to restore a working profile backup of Firefox made with FEBE in windows inside of VMWARE, when I load Firefox more that half of the plugins that were working in Windows and OS X natively, are reporting as not compatible with this (V7.0.1) Firefox and will not update to a working version, as in many cases they are the latest version anyway.
Also it is inconsistent, as i have tried several times to install Firefox and restore the profile and each time it is not all the same plugins that are disabled and reporting as incompatible.
I have also tried to do a clean install of Firefox and going to the website and installing the plugins directly, and while i have not tried all of the disabled plugins, I am unable to install plugins that i am currently using in the same version of Firefox outside of VMware that are working and or can be installed when I am not running Firefox inside of VMware.

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Best Practices: BIP Infrastructure and Multiple Installations/Environments

Hi all,
We are in process of implementing BI Publisher as the main reporting tool to replace Oracle Reports for a number of Oracle Form Applications within our organization. Almost all of our Forms environments are (or will be) SSO enabled.
We have done a server install of BIP (AS 10gR3) and enabled BIP with SSO (test) and everything seems in order for this one dev/test environment. I was hoping to find out how others out there are dealing with some of the following issues regarding multiple environments/installs (and licensing):
Is it better to have one production BIP server or as many BIP severs as there are middle tier form servers? (Keeping in mind all these need to be SSO enabled). Multiple installs would mean higher maintenance/resource costs but is there any significant gain by having more autonomy where each application has its own BIP install?
Can we get away with stand alone installations for dev/test environments? If so, how do we implement/migrate reports to production if BIP server is only accessible to DBAs in production (and even real UAT environment where developer needs to script work for migration)? In general, what is the best way to handle security when it comes to administration/development?
I have looked at the Oracle iStore for some figures but this last question is perhaps one for Oracle Sales people but just in case anybody knows... How's licensing affected by multiple installations? Do we pay per installation or user? Do production and test/dev cost the same? Is the cost of stand alone environment different?
I would appreciate if you can share your thoughts/experiences in regards to any of the above topics. Thank you in advance for your time.
Regards,
Yahya

Your data is bigger than I run, but what I have done in the past is to restrict their accounts to a separate datafile and limit its size to the max that I want for them to use: create objects restricted to accommodate the location.

Adobe Reader 8.12 Silent Install Breaks If same version already exists (New)

June 2, 2008 I built a silent package that works fine but silent install breaks if the machine already has same version of adobe reader installed. Is there a way to check before the installation begins and cancell the install without prompting any screens to the users. I want to push this silent package to 600 machines but when silent install breaks, it prompts the user to remove or repair AR. Can someone pls. help with this....thanks.6049212177

The link to the Reader forum is at the top of this forum.

Export multiple resolutions/formats/versions in single export preset

I would like to be able export multiple resolutions of a project at the same time into separate folders. I can kind of do this now by having multiple export presets and running each of them right after the other and then letting them export simultaneously. Even though the export preset has a folder name specified, I have to manually type in the unique project name into each export preset. Unfortunately this becomes a little bit cumbersome as I often use 3 or 4 export presets for each project, and I may be exporting multiple projects at the same time. Obviously it makes sense to just type the unique text once (or have it automatically read from metadata) to avoid typos and make it easier on me.
I think there are two parts to make this work. The first is using metadata to name the folder name (to ensure unique foldernames), and the second is to allow "export preset groups" that export multiple presets together.
Here is my scenario:
I have three export presets:
600px saves to subfolder "project 600px for web"
2400px saves to subfolder "project 2400px for print"
600px watermark saves to subfolder "project 600px watermark"
So I have to type the real project name, replacing "project" three times for each project. This information could be easily entered automatically because lightroom already has that metadata in the folder name, or collection name.
This could be entered for the folder name in the same way custom file naming is done with the Filename Template Editor.
Another option would be use the Custom Text field in the Filename Template Editor to manually enter the project name if it's not already in some metadata field.
All of this already works great with the file name options, it just needs to be applied to the folder name as well.
Once the folder naming is taken care of, just group multiple presets into a preset group, or allow to select multiple presets at once, and exporting multiple resolutions/formats/versions of a group of images is made easy.

Thanks Rob
Your export plugin does allow running multiple export presets in a single group, however it still doesn't address the folder naming issue. Using your tool, I can easily initiate my multiple presets in a single export, however I am stuck using the generic foldername that I specified in my original export preset. This means that after the export completes, I still have to rename the folders to the particular project name. I would save the time of typing the project name into lightroom, but then just have to repeat that same task later outside of lightroom. It also prevents me from exporting two projects at the same time (or one after the other) because both projects would end up in the same generically named folders.
That said it is a useful plugin that I will likely use under the specific scenarios where it does work.

App Store consistently fails to update apps - but shows multiple installs

The App Store app on my MBP running OS 10.9.2 consistently fails to install software updates, and shows multiple installations in the Updates "log". I've had to reinstall the OS to get to 10.9.2 after multiple failures (with corresponding entries in App Store Updates and incessant hanging at install), and had to troll around the Apple Support Communities to find a URL for Safari 7.0.3 after it also showed falsely as having updated.
Anyone have an idea about what is going on? Missing good old Software Update.

Hi Eskimo Boy,
I have he *EXACT* same issue. I even reinstalled Mavericks completely from scratch and tried TONS of other things.
What I tried so far is (incomplete list):
Set up new user and tried to update => failed.MAS consistently crashes when launched under the new user. => no solution but rather an additional problem => failed.
Tried to update in safe mode => failed.
Tried to reinstall Mavericks => failed.
Tried to reinstall Mavericks and migrate all user data from Time Machine backup => failed.
Tried PRAM reset => failed.
Even tried the highly overrated check permissions => failed.
Whatever I try, I just can't update iBooks from 1.0 to 1.0.1 and Safari from 7.0.2 to 7.0.3. If you have any solution, then please let me know.
Cheers, Paul
P.S.: APPLE! THIS DRIVES ME NUTS! IT DRIVES ME NUTS JUST AS MUCH AS YOUR LOCATION SERVICE NOT WORKING PROBLEM!

Are we allowed multiple installs of Appstore apps?

I want to install my copy of FCPX on my wife's MBP. Is this legal? When I login to my Appstore account from her computer and try to download, it opens the billing page again, and I'm worried we're going to be charged another $300. I've read mixed opinions on this subject and am hoping someone can provide clarification. Are we allowed multiple installs of Appstore apps?

You can download and install purchased apps to all your Macs providing you use the same Apple ID.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Same apps keep needing updating to same version

I keep having the same 4 or 5 apps requiring updates on the Touch. Same version gets updated every single time too. I know these are not new updates, but the same one requiring an install over and over again. It might be a couple days between installs too. What is going on? I'm not not to qipe the TOuch, but I think I might have to do a fresh install.

mine does this too, it's really annoying. I'll click updates and it will say "X" has update for [insert todays date here]. Then after downloading, i'll go back into the app store and it will show up to 12 apps that need updates, except the update is from a date about 2 weeks-2 months ago. I noticed it does this now in itunes as well. Maybe it always has but i just noticed it. Each time you refresh the "Applications" tab, there's a new number of apps that need an update.

Appleworks updater finds multiple installations ...

am updating applewrks from 6.2.7 to 6.2.9 ... powerbook G3 running 10.3.9 ....
i get an error message that says i have multiple installations of appleworks and that the installer is quitting ... i do not have multiple installation; in fact, when i delete my one version, the installer says that indeed i do not have any versions of appleworks to update ... what is going on?

Welcome to Apple Discussions Bob
AppleWorks comes in 15 different versions for different languages. It is not multi-lingual like OS X-native applications. It is possible to install any or all of them from the restore DVDs that came with the last of the pre-Intel iMacs, iBooks & Mac minis. I think the error message you're seeing is the one that means it can't find a copy of AppleWorks for that updater to update. The most common reason is that the language of the updater doesn't match the language of the installed version of AppleWorks 6. This particularly applies to the two English versions. There are several websites with links to incorrect updaters. The UK Apple site in particular has been known to point to the north American updater for quite some time. The most reliable links are on this page where you can choose the appropriate updater for your AppleWorks 6 installation.

RTMT - Multiple Installs, Same version?

Similar Messages

Maybe you are looking for