RTSP steaming Port Forward (?) problems with 4 (four) WVC54GCA cameras on WRT54G v2 router.

I am having difficulties correctly setting up my four (4) WVC54GCA cameras on a WRT54G v2 router to make them stream RTSP videos that I can view on my BlackBerry Bold. I can access the cameras from the internet, through
http://CAM1_SubDomain.Linksys-Cam.com/1024
http://CAM2_SubDomain.Linksys-Cam.com/1025
http://CAM3_SubDomain.Linksys-Cam.com/1026
http://CAM4_SubDomain.Linksys-Cam.com/1027
so that part works fine.
All the 4 cameras are set up with static IP addresses.
The default RTSP port 554 and RTP Data port at 5000 are forwarded to CAM1 IP address. I can access CAM1 RTSP feed on my Blackberry Bold (and also on a good old Samsung SGH-A706 cell phone).
CAM 1 Settings:
STATIC IP: 192.168.1.201
Alternate HTTP Port: 1024 à Forwarded to 192.168.1.201
RTSP Port: 554 à Forwarded to 192.168.1.201
RTSP Data Port: 5000 à Forwarded to 192.168.1.201
RTSP access on cell phone WORKS only with the following format: rtsp://CAM1_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code.
CAM 2 Settings:
STATIC IP: 192.168.1.202
Alternate HTTP Port: 1025 à Forwarded to 192.168.1.202
RTSP Port: 1029 à Forwarded to 192.168.1.202
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE, HELP PLEASE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM2_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code.
Actually, when I enter the above link, the cellphone brings in the feed from CAM1, I guess due to the identical access code with CAM2. Once I change the access code for CAM2, it doesn’t’t show any feed.
CAM 3 Settings:
STATIC IP: 192.168.1.203
Alternate HTTP Port: 1026 à Forwarded to 192.168.1.203
RTSP Port: 1030 à Forwarded to 192.168.1.203
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE HELP PLESE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM3_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code. This feed also brings in CAM1.
CAM 4 Settings:
STATIC IP: 192.168.1.204
Alternate HTTP Port: 1027 à Forwarded to 192.168.1.204
RTSP Port: 1031 à Forwarded to 192.168.1.203
RTSP Data Port: NOT SURE IF I NEED TO FORWARD ONE HELP PLEASE
Despite I have a dedicated subdomain for each camera from TZO, the following link DOESN’T WORK
rtsp://CAM4_SubDomain.Linksys-Cam.com/1111, where 1111 is the access code. This feed also brings in CAM1
DMZ could probably fix the problem for a second camera, but not for all four CAMs
OS: XP SP2
Question 1: Any idea how can I get all the four cameras RTSP feed on my cell/BlackBerry?
Question 2: I am running out of Port Range forwards. Should I add more port forwards, I have only one more shot. Any workaround?
Each and every help idea is greatly appreciated!

I have six of these cams and used the tutorial and review at http://www.Myhomserver.com for help. First thing, set ALL the RTSP access codes the SAME, so all you need to do is increment the port for each cam
Cam 1 - 192.168.1.200 - set at port 80 TCP - RTSP port default at 554, forward port 5000 UDP/TCP and the RTSP access code 12345
Cam 2 - 192.168.1.201 - set at port 1024 TCP - RTSP port at 1029, forward port 5001 UDP/TCP and the RTSP access code 12345
Cam 3 - 192.168.1.202 - set at port 1025 TCP - RTSP port at 1030, forward port 5002 UDP/TCP and the RTSP access code 12345
Cam 4 - 192.168.1.203 - set at port 1026 TCP - RTSP port at 1031, forward port 5003 UDP/TCP and the RTSP access code 12345
Cam 5 - 192.168.1.204 - set at port 1027 TCP - RTSP port at 1032, forward port 5004 UDP/TCP and the RTSP access code 12345
Cam 6 - 192.168.1.205 - set at port 1028 TCP - RTSP port at 1033, forward port 5005 UDP/TCP and the RTSP access code 12345
This worked for me using the above settings....take your time, plan out the ports, all RTSP ports must be different on each cam
Accessing CAMS can be done via your cell phone below:
Camera 1---> RTSP://<your TZO camera domain>:554/12345
Camera 2---> RTSP://<your TZO camera domain>:1029/12345
Camera 3---> RTSP://<your TZO camera domain>:1030/12345
Camera 4---> RTSP://<your TZO camera domain>:1031/12345
Camera 5---> RTSP://<your TZO camera domain>:1032/12345
Camera 6---> RTSP://<your TZO camera domain>:1033/12345
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Similar Messages

Port forwarding problems with WRT610N v2 + WAG54GS v1.0

Background:
I have a WAG54GS v1.0 (Annex A) which I was using to handle my home network and my ADSL connection. I bought a WRT610N v2 (which I'll refer to as the router) with the intention that it would replace the networking duties of the WAG54GS (which I'll call the modem), which would be relegated to just handling the Internet connection. Both are running their latest firmware.
I've gotten this configuration to work, but with one problem: I've lost a lot of flexibility in regard to port forwarding. The problem is that the only way I've managed to get the Internet to work is by having the router on 192.168.0.1, and the modem on 192.168.1.1. If I try and have both on 192.168.0.x or 192.168.1.x then connecting to the Internet no longer works under any configuration of options I've tried.
What this means is that when I go to setup port forwarding in the modem, I can only forwards to clients on 192.168.1.x, but the router can only forward to 192.168.0.x. The only things I can get to work are situations where port range triggering can be applied, so only when a connection is made on the relevant port to an external IP, and then that external IP also communicates back on that port. As you may guess this doesn't nearly cover all cases.
Question:
Should it be be possible to have both router and modem on either 192.168.0.x or 192.168.1.x, which would allow port forwarding to work as expected. That should have in theory been possible with the modem's bridge mode except that it's then impossible to configure the PPPoA settings necessary to connect to my ISP.
Or am I going to have to rethink the network layout (i.e. buy a dedicated ADSL modem and fully retire my WAG54GS?)
Solved!
Go to Solution.

Actually in the end what I figured out was that as far as my WRT610N was concerned my WAG54GS was my ISP, and that was all it needed to know about the Internet connection. So I set it to connect to the WAG54GS with a static IP, stuck that IP into the WAG54GS's DMZ, and left the WRT610N to handle port forwarding as all devices that connect will do so through that. (Yes, I've disabled the wireless features of the WAG54GS)
I'm reasonably sure I tried the combination of settings you've suggested (including moving the WAG54GS off the Internet port of the WRT610N, which I would have wanted to avoid anyway as I have four permanently connected devices anyway) and found it still wouldn't work. And I wasn't trying to set both to 192.168.1.1 at any point, my self-obscured point was that changing only the last block of the IP address failed to work for accessing the Internet.

How do you port forward a dvr home security camera using Actiontec Wi424wr router

I been on this for days now. I viewed the videos, I read the websites and I'm still not able to remotely view my camera. Is there a step I am missing? Do I have to make a change in the Windows program too? ActionTec and Verizon what am I'm missing? Thanks for any help.

Common Problems & Fixes For Port Forwarding.
if you run out of ideas take a look at this.

Problem with wired computers on a WRT54G wireless router

I have a WRT54G wireless router that has been working flawlessly up until now. On Sunday, my son informed me that his computer, which is wired wasn't connecting to the internet. Upon further investigating, we found out that our wired computer in our gameroom wasn't connected either. However, our main pc, which is also wired, was connecting just fine. I checked my laptop and several other wireless devices and they were online as well.
Here's the weird thing. In my gameroom, I have just one cable coming into the room from the router. That cable connects to a 5 port switch which then connects to my gameroom pc, Xbox 360, and Playstation 2. I checked my Xbox 360 and it connected to Xbox Live as soon as I turned it on so that told me that I had connectivity coming from the router and the switch. But why was the pc not connecting?
Anyway, I restarted the router, but that didn't fix the issue. I then restarted my cable modem, a Motorola Surfboard, and the router and the issue was resolved. All my pcs were connecting again.
Everything was fine until yesterday when the exact same issue occurred. This time the modem and router restarts did not fix the problem. Again, I have connectivity coming from the router to the 5 port switch because my wired Xbox 360 connects just fine, but my wired pc does not. My son's wired computer is not connecting, but my main pc is. I cannot figure out how to resolve this issue.

Might be possible that the router need reconfiguration ... So reset the router...for few seconds ... after reset ... Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as “admin "" all in lower cases and then click on ok. On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button. Now click on the sub tab ""MAC address clone"". - Click on enable - Click on clone your PC's MAC button and then click on the Save Settings button. Power cycle the network again & see if it works ...

Port Forwarding Issues with Westell a 7500

I'm having troubles getting port forwarding to work on my Westell 7500 router. I have used the instructions provided at http://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/Troubleshooting/PortForwarding/123866....
Having set up my own port forward I had my aplication test the port and I was told it was closed. Then I went to a third party web based port testing site (http://www.canyouseeme.org/) to confirm that the port was indeed closed and not just a problem with my aplication. The site told me that the port was closed.
So I decided to try one of the pre-created port forwards included with the modem. Using the port number provided I changed the port my aplication used and it still self-tested as closed. I then went back to canyouseeme and it too told me that the port was closed.
I should also note that in the "Port Forwarding" screen on the router the delete icon (I'm assuming that is what it is - the icon has a red X through it) does not respond to being clicked on. When I hover the mouse over the icon I get the following text overlay in the bottom left corner of the Chrome browser window - javascript&colon;deleteEntryStart(5,document.TableMgr,0);
To sum up, neither a personal nor a pre-fab port forward show in tests to be working and a function also appears to be not working.
Here's the rub - I am told by tech support that this is an L3 issue. L3 issues are not covered under regular tech support and are very expensive buy. My gut feeling is that the router is defective, but I need some way to confirm this before I start making a stink with customer service. I don't want to spend $39.00 to be told my router is broken before I can send it in and I have a feeling that customer service is going to want to have solid evidence that the problem is not pilot error before ponying up for a replacement modem.
Does anyone have any suggestions for testing the router more thouroughly? Is this a known issue? Or does anyone have any suggestions about programming the port forward?
Thank you in advance for taking the time to address this!
Solved!
Go to Solution.

If I am not mistaken, the firewall in the router must be at least low.
Otherwise, it will ignore all rules (or something along that line).
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

WRT320N port forwarding problem

Hi, I've got a web server on my NAS, with my old WRT54G I didn't have any issue with port forwarding but with my new WRT320N I can't get it working (I tried single and port range). My website is ok if I try to access from LAN but not from internet. I have seen http://routersetup.blogspot.com/2007/08/port-forwarding-checklist.html but there's nothing wrong in my conf. Is anyone can help me ?
Solved!
Go to Solution.

Oh it was quite simple, my NAS is a QNAP TS-109 II, I just selected high level of security in system administration > security, with that I had limited the access to 192.168.1.x network. Not a surpise I couldn't reach it from internet.
I don't think the info will help someone but it might be a reminder that you always have to look to your own configuration when you blame hardware

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

I have got problem with my pc-cam 950 slim

I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
Thank you for taking the time to help me.

Originally Posted by Colin-CL
Hi,
Have you checked that you have put in brand new 2 x AAA batteries?
Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
hi,
Yes, I put two new batteries
When connected to the computer nothing happens
What can be done to reset it?
By replaced capacitor problem can be solved?

Problem with the back camera in iPhone 4 (Black Shadow)

Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?

It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with the front camera on iPhone 4

Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
http://bit.ly/epZypp
I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
So, guys, can you help me?

Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

TS2634 I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry...

I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too? please let me know!

Did you put a screen protector on the phone or did you pull the protective film off the phone?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

I will Paypal you $100 if you can resolve this Port Forward problem

Believe me when I tell you, If you are the person who fixes this problem, I will GLADLY Paypal you $100.
This is so unbelievable. Short story is, after 12 hours of paid support through Support RIX, 6 hours with TWC support, and 4 different modems there isn't a single person in these groups that can get ports forwarded on my Linksys E4200 router.
I am running a fresh copy of windows 7 with all updates and no anti virus installed. I purchased a Motorola ARRIS SURFboard modem 200 series DOCSIS 3.0 so I have no double router issues. Before I was using the TWC moden/routers in bridge mode.
I have no problem setting a static IP or configuring port forwarding. It doesn't matter if I have windows firewall on or off. I can't get an outside port checking website that can verify an open port.
I am trying to play Battlefield 4 using the port forwarding request they provide.
If I run a local port check program on my computer it will confirm the ports open. Ok, Fair enough. They tell me the outside port checking utilities will say the port is closed unless I am running the program that uses these open ports.
SO I run the game and check and it always says port closed. One of the ports I want to open is 80. It has to be open to get internet anyway but it still shows closed using the online port checking websites.
I connected the computer to the modem. No router. I keep getting ports closed or filtered when I check through 6 different port checking sites. Leads me to think their is some kind of block in the ethernet card software.
Its a Realtek PCIe GBE Family controller with a driver date of 8/26/2014. Latest one I could find.
I think its an ethernet card filter. Just my thoughts. Here is the current adapter card settings.
Advanced settings on Ethernet card
Auto Disable Gigabit/ Disabled
Flow Control/ RX & TX Enabled
Green Ethernet/ Enabled
Interrupt Moderation/ Enabled
IPv4 Checksum Offload/ RX & TX Enabled
Jumbo Frame/ Disabled
Large send Offload v2 (IPv4)/ Enabled
Large Send Offload v2 (IPv6)/ Enabled
Network address/ You can check the box for Value and add one. Currently its checked to Not present
Priority & VLAN/ Enabled
Receive buffers/ 512
Receive Side Scaling/ Enabled
Shutdown Wake-on-Lan Enabled
Speed and duplex/ Auto Negotiation
TCP Checksum Offload (IPv4)/ RX & TX Enabled
''''''''''''''''''''''''''''''''''''''(IPv6)/ RX & TX Enabled
Transmit buffers/ 128
UDP Checksum Offload (IPv4) RX & TX Enabled
'''''''''''''''''''''''''''''''''''''''(IPv6) RX & TX Enabled
Wake on Magic Packet/ Enabled
Wake on Pattern match/ Enabled
WOL & Shutdown Link Speed/ 10 Mbps First
I used a port tester downloaded from PCWinTech.com v3.0.0. It says the ports are open. When I close port 80 it says port 80 is closed. My problem is nothing outside my network can confirm an open port. It always states port closed.
The game I am playing is Battlefield-4. I have played all of the campigns without any problem but once online it crashes. The BF-4 community says I need to open 5 single ports and 5 port ranges. This is what I am trying to do.
We have tried an ARRIS router modem, a Ubee router modem (both in bridge mode) and are now using a motorola modem. All with the same problem. We checked the ports during game play and they all say closed.
I will post pictures of my current router settings.

What model router do you have?
What Firmware version is currently loaded?
What region are you located?
What is your current model ISP modem your using now?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
Ensure devices are set to auto obtain an IP address.
If http://en.wikipedia.org/wiki/Ipv6 is an option on the router, select Local Connection Only.
If you set up port forwarding, disable uPnP and test.
When you check for port status, you have to be actively using the port before you scan check as you may get a false negative if your not using the port. If your using the port then check the status, you should get an accurate result.
I would try using Port Range Triggering instead of PF and set up the port as follows for your PC that your gaming with:
0 thru 65535. A bit less hassle to set up then all those different port rules.
PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired LAN PC while testing.
Disable any downloading client software managers, i.e. Torrents or similar.

RTSP steaming Port Forward (?) problems with 4 (four) WVC54GCA cameras on WRT54G v2 router.

Similar Messages

Maybe you are looking for